Double reel buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
3

Double reel with levelling line Kohler KRE 30.400/21-3000.2 H

Breiter Wasmen 3, 78247 Hilzingen, DEGermany
6685 km
1995
ready for operation (used)
Material width: 0400 mm Bfjmu2we Weight of coil: 3.0 t Coil outside diameter: 1500 mm Number of the straightening rollers: 21 Weight: ca11 t Leveler: KRE 30.400/21 decoiler: 3000.2 H clamping device: hydraulic spreading: hydraulic with tape guide more
1

Double reel BSA 2 x NO 20/360 V

ErfurtGermany dealership location
6676 km
1999
refurbished (used)
• Capacity kN 2 x 20 • Coilaussendurchmesser mm max. 1500 • Jaw spreader range 420-520 mm • Band width mm max 360 • Speed min-1 17 • Motor power kW 2 x 1, 1 Eh0yo22z • El. Connection V/Hz 400/50 • Weight kg ca 1200 reel body very stable welded steel construction reel shaft made of high-grade steel, 2 x stored in low-maintenance roller bearings with drives, about STM gear motor with friction clutch; serves as a adjustable drag in the non-driven processing of start-stop control by proximit... more
3

Double reel Lorenz HM 150.1.1.

D - HessenGermany dealership location
6573 km
1997
used
SKU: MA918 Manufacturer: Lorenz type: HM 150.1.1 Year: 1997 Machine no .: 000 344 Length mm: 1650 Width mm: 950 Height mm: 1830 Weight kg: 570 Maximum load: 380V / 3x25A Accessories: User Manual / schematics machine data: spread range 260-320 mm width 100 mm outside diameter 1000 mm load 1,5 KN per reel T93hji7k0 more
6
.. Double reel Fabr GSW Schwabe Type DLH 500 Masch 5350-90 Year 1990 Specifications: Contact rating per reel page 500 kg Max. Coil diameter 1200 mm max. Bandwidth 360 mm Weight 600 kg Dimensions 1400 x 1500 x 1900 mm with - swivel mechanism with foot pedal - press arm pneum. controlled - brakes with friction wheel - each reel separately braked - without hand drive, in good condition Jwiw7nfd more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Davn3de DOUCET EM-2 End Matcher, Double Ended:Capacity & Description: -- 12" Min. to 96" max. length x 1-3/4" to 5" width x 3/4" thick cap.; includes a traverse bar conveyor 21' long x 5' wide; bar spacing is available at 12" or 8" center to center. -- Basic system is powered by a 3 HP variable speed main drive (20 - 60 FPM) and is equipped with independent tongue & groove machining centers laid out on opposite sides of the transport table. -- Capacity... more
3
MACHINE DATA Koch Model BD-60-A Double sided Boring & Dowel Inserting Machine with vertical Hopper Feed Make: Koch Maschinenfabrik GmbH & Co KG Model: Koch Model BD-60-A Serial#: A0705/7617 Year of Mfg.: 2007 Condition: Very Good few working hours Nc9wj Was installed in the USA, Plant stopped working in late 2008-2009, low working hours! Purchased and packed in 2009, stored in a try Warehouse Facility in the US till now! DESCRIPTI... more
6
Gabbiani Double End Tenoner Model S.Q.V Full CNC Controlled Year 2001 2 X 2.4 KW Jump Scoring Units 2 X 7.5 K.W. Hogging Units 4 X 8.0 K.W. Stack Tooling Shaping Units (533 MM Height) 3000 mm Opening Min. Width 235 mm Max. Height 120 mm 0-36 Variable Feed Speed 33” Laydown Space 83” Laydown with Extensions 99fxtx02b Driven Top Pressure Full Sound Enclosure 460 Volts more
6
spindle diameter 125 mm x-travel 1120 mm y-travel 710 mm w-axis 630 mm z-axis 315 mm table surface area 900 x 1400 mm table load 2000 kp feed range - boring 0,025-2,24 mm/U turning speed range n:20 36-2240 U/min rapid travel z-direction 2500 mm/min rapid travel w-direction 1400 mm/min electrics - voltage/frequency 380/50 V/Hz spindle taper SK 45 total power requirement 11 kW weight of the machine ca. 9 t dimensions of the machine ca. 3,9 x 2,6 x 2,9 m - 2-axis DRO Ljiyd - exhauster - vario... more
6

Vertical Turret Lathe - Double Column NILES DKZ 6300 x 3500

ab Werksstandort,unter StromGermany dealership location
6405 km
1983
used
faceplate diameter 5300 mm swing diameter 6300 mm turning height 3500 mm max. ram stroke 1800 mm table load ca. 80 t faceplate turning speed range 0,35 - 14 U/min feed range 0,063 - 11,2 mm/min swivel range of slides - vertical +/- 30 ° cross rail - adjustment 3300 mm tool travel 3450 / 1000 mm turning tool - shaft cross cut 50 x 50 mm crossrail -rapid travel 500 mm/min rapid travers - turret head, hor./vertical 960 mm/min dimensions of the machine ca. 14,2 x 8,2 x 9,7 m Rpxo82ji7 total power r... more
5
ram pressure:400 Mp Pressure attenation:200 Mp die cushion:60 Mp Drawing cushion:900 mm Ram stroke:30 mm die cushion stroke:200 mm Installation hight, ram and table:1400 mm Workspace table:1400 x 2000 mm Ram workingspace:1400 x 2000 mm Die cushion workspace:650 x 1500 mm Demand for oil:4000 L Connection value:270 kW voltage:380 V Ik7d80zfi Shipping weight:52 to height:6600 mm width:2010 mm length:3900 mm working feed:60 mm/sec feed up:450 mm/sec feed down:500 mm/sec Year:Überholt 2000 1972 Ser... more


double reel
every day

New machines via email!

Be informed!
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbu7z0rwcu S. A. WOODS 525 BM-2 End Matcher;(1) Left and (1) Right separated shaper units. -- Tongue unit with: Trim saw approx. 5 HP motor, (1) set of Top/Bottom. heads approx. 5 HP motors for machining the tongue. -- Grooving unit with: (2) sets of Top/Bottom units (4 heads total) for machining the groove, approx. 5 HP motors on each. -- Part Dimensions: Approx. 3/8" - 1" Max. stock thickness, 8" Max. width, and 10" min. by 7.5' Max. length. --... more
5
x-travel 2210 mm y-travel 820 mm workpiece height 860 mm table-size 2000 x 750 mm length of stroke min./max. 163 - 2210 mm column daylight 850 mm work speed 5-55 m/min Qmohuudt2 return speed 5-75 m/min cross rail adjustment - horizontal 880 mm cross rail adjustment - vertical 250 mm side head - cross travel 250 mm side head - vertical travel 850 mm feeds crossrail slide horiz 0,1-10/vert. 0,1-5 mm/min feeds side carriage 0,1 - 5 mm/min workpiece weight 5400 kg pulling power 4000 kg total power ... more
5
faceplate diameter:4000 mm Vsetae swing diameter:4400 mm turning height:2060 mm slide stroke:1200 mm ram head dimension:250 x 250 mm faceplate turning speed range:1 - 92 U/min cross rail adjustment:1800 mm workpiece weight:30 t feeds:1 - 2000 mm/min main drive motor:55 kW total power requirement:80 kW weight of the machine ca.:64 t dimensions of the machine ca.:9,0 x 7,2 x 6,6 m with CNC SIEMENS 840 D for 2 axis tool Basic holder KM 80 In process camera screen coolant attachment and chip conve... more
6
pressure 60 t no. of strokes 80 - 400 Hub/min Clorsjn sheet width 150 mm table-size 700 x 530 mm dimension of ram 700 x 430 mm distance table - lower edge of ram 350 mm ram stroke - adjustable min/max 20 - 80 mm feed length 5 - 150 mm total power requirement 15 kW weight of the machine ca. 9 t dimensions of the machine ca. m - with band-feeding unit - 2 connecting rods - adjustable stroke - strip decoiler - noise absorbing cabine more
1
pressure:40 t distance between columns:600 mm stroke: mm ram power:40 Mp max. ram stroke:160 mm dayligth:360 mm table-size:560x400 mm T-slots:18 mm ram hole:40 mm table height:950 mm Mskwyo Total height:2540 mm length in width:1440 mm power capacity:5,5 kW centering bore - table plate:100 mm depth:1100 mm column depth:950 mm oil box capacity:250 l total power requirement:ant kW weight of the machine ca.: t dimensions of the machine ca.: m 100 % before loading warranty: none used double colum... more
1
Elect./Voltage: 380 V, 50 Cy, 3 Ph. Bbvqun2fz0 RILESA AHS 1404 Double Sided Cut Off and Bore;Made in Denmark, RILESA builds heavy duty machinery for cut, shape, and dowel operationsMachine Specifications: -- (2) Drilling supports from side (each with 5 drills). -- (1) Drilling support from bottom (each with 5 drills). -- Drill bit centers 32 mm. -- The side drilling motors (2) x 0.25 kW. (.33 HP). -- The back drilling motor 1.1 kW. (1.5 HP). -- (2) Saws (pneumatically regulated), S... more
6
Pressure: 63 t distance between columns: 200 mm stroke: 150 mm dayligth: 430 mm no. of strokes: 400 Hub/min T-slots H 12 650: 18 mm hole in table: 420x160 b x l mm ram surface area: 650 x 450 mm control: Wanske Tronicpress CNC passage of columns: 550x540 mm tank: 200 l stroke of ram - fixed: 100 mm ram diameter: 40 mm table height over floor: 1000 mm table: 600x450 mm table height over floor with metal base stand: 880 mm total power requirement: 30 kW weight of the machine ca.: 3,9 t space r... more
3
faceplate diameter:2800 mm swing diameter:3500 mm turning height:2315 mm faceplate turning speed range:2,1 - 1112 U/min max. workpiece weight:12.000 kg Mljuf feeds:0,044 - 8 mm/U ram head - vertical travel:1000 mm ram head swiveling:+/- 45 ° turret head - vertical travel:800 mm total power requirement:50 kW weight of the machine ca.:35 t dimensions of the machine ca.:5,2 x 4,4 x 5,1 m with two vertical heads more
3
grinding dia max continuous grinding 80 grinding dia rotary grinding 80 grinding dia min rotary grinding grinding dia min continuous grinding grinding wheel diameter 600 mm grinding wheel speed 45 m/sec Qxaa8kzzj workpiece width - max. 80 mm max. workpiece diameter 65 mm grinding spindle drive 2 x 21 kW spindle stroke 190 mm spindle turning speed range 300 - 1100 U/min control SIEMENS 840D total power requirement 50 kW weight of the machine ca. 9 t dimensions of the machine ca. m - C... more
5
x-travel:5700 / 10850 mm y-travel:3300 mm z-travel:1050 mm distance between columns:2700 mm workpiece weight:50000 / 75000 kg table-size:4000/9150 x 2000 mm table height:575 mm control:SIEMENS 850 M tool taper:SK 50 no. of tools in the magazine:126 Stück transmission ratio:3 spindle turning speed - stepless:6,3 - 2500 U/min rapid traverse:24000 mm/min max. torque on the spindle:5500 Nm Ebdkmaj dimensions of the machine ca.:LxBxH 23 m x 8,0 m x 6,1 m m weight of the machine ca.:120 t total p... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbu70ec2wv 120" Cap., motorized opening with indicator, Stations with Jump score - Trim/hog - Top & bottom tenons. -- 6" Min. part width, approx. 12" infeed area in front of holddowns, manual thickness opening, upper driven holddowns, single post machine. -- Each side equipped with: -- 1st Station: Jump score saw, 1.5 HP motor. -- 2nd station Trim/hog saw , 5.5 HP motor, universal mount. -- 3rd Station: Jump cope universal mount with 6.5/5.5 HP mot... more
5
x-travel:12000 mm y-travel:5600 mm z-travel:1250 mm workpiece height max.:1850 mm table-size:12000x3600 mm T-slot (width-distance-quantity): mm max. table load: kg distance between columns:4400 mm distance spindle nose and table: mm Msipd spindle drive:32 kW max. torque on the spindle: Nm spindle nose:50 ISO spindle speed:10-2500 U/min rapid traverse X,Y:10000 mm/min. rapid traverse Z-axis:10000 mm/min milling feed range:0-3000 mm/min Machine size (LxWxH):19.700 x 10.000 x 7.400 mm total power... more
6
faceplate diameter 8000 mm swing diameter 10000 mm turning height 6500 mm spindle adjustment 3500 mm max. turning diameter between columns 10250 mm workpiece weight 350 t power capacity 110 kW feeds 72 mm/min rapid traverse 2000 mm/min faceplate turning speed range 0,07 - 18,7 U/min cross rail adjustment 6000 mm Cl8fr2zk Control NUM 1060 total power requirement 250 kW weight of the machine ca. ca 350 t dimensions of the machine ca. 14,3 x 9,6 x 12,5 m 2013/2014 complete overhauled and new E... more
4
faceplate diameter:3500 mm swing diameter:5900 mm turning height:1300 mm slide stroke:900 mm faceplate turning speed range:0,1 - 30 U/min total power requirement:70 kW weight of the machine ca.: t Mxnpn dimensions of the machine ca.: m CNC HEIDENHAIN TNC 145 CS 2 Ram´s more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Ncdgx SCMI Concept 2000 Double End Tenoner -- 102" (2,600 mm) Opening cap., motorized opening with keypad entry & LED readout. -- 36"approx. infeed chain area in front of holddowns, -- 0" - 4" motorized thickness opening with mechanical digital readout, 6" min. width, 2-post machine. Each side equipped with: -- 1st Station: Trim saw tilitng 0-45° , 6.4/9 HP, 3,450/5680 RPM -- 2nd Station: Coping unit with 9. HP motor, 7,000 RPM -- 2 HP Drive for 10 ... more
2
max. dia. of grinding wheel: 200 mm revolution per minute: 2850 U/min grinding wheel width: 25 mm with handrail: ja palm rest: ja number of wheels: 2 Stück total power requirement: 0,5 kW weight: 21,5 kg dimension machine [...]: 0,3x0,8x1,1 m further technical details: S8ygstgj9 -220/380V - grinding protection with transparent windows , foldable - welded table frame - machine lamp machine on sale as is! more
4

Planer-Type Milling M/C - Double Column MATTEC 80-30-60

Werksstandort, unter StromGermany dealership location
6390 km
2015
used
x-travel 8500 mm y-travel 4400 mm z-travel 1600 mm Control Heidenhain iTNC530 surface area 10000 x 3200 mm rapid traverse 20 m/min spindle turning speed range 4000 U/min Yrrrlg Torque 1000 Nm tool taper ISO 50 number of tools 61 total power requirement 60 kW weight of the machine ca. 62 t Portal milling machine Mattec 80-30-60 - spindle hours approx. 980 hours - Main spindle drive air-cooled - Lubricated and cooled two-stage gear-oil circulating air -> 1st stage - 1000 Nm in S6 operation... more
5
pressure 300 t passage width 1300 mm stroke 300 mm table surface area 1250 x 900 mm Bzslaxr dimension of ram 1250 x 900 mm ram adjustment 250 mm no. of strokes 20 - 25 Hub/min dayligth 500 mm band width 420 mm sheet thickness - max. 6 mm feed length 400 mm voltage 380 V total power requirement 50 kW weight of the machine ca. 40 t dimensions of the machine ca. 2,8 x 2,0 x 5,9 m with decoiler, make SCHLEICHER with straightener, make GEORG, model RMB 400 with feeder, make FREI more
1
x-travel 10250 mm y-travel 5320 mm z-travel 800 mm Bbcxc0akll w-axis 2900 mm table-size 10000 x 4000 mm distance between columns 5000 mm workpiece weight 40000 kg distance table - lower edge spindle 3500 mm spindle diameter 100 mm diameter of quill 330 mm spindle turning speed range 30 - 4500 U/min spindle taper ISO 50 spindle motor 30 kW feeds x/y/z -stepless 1 - 6000 mm/min rapid travel x/y/z 10/20/8 m/min Control Fanuc 31i total power requirement 100 KVA weight of the machine ca. 130 t dim... more
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. C7wcd00 HOMAG NFL 26/8/25 Double End Tenoner;6-Station (each side) Double End Tenoner, right sight [...] -- 5/16" to 3.9" (8 - 100 mm) material thickness and 7.6" to 98" (190 - 2,500 mm) opening. -- Motorized (2-speed) opening with NC 21 Line control & screen display. -- 49" (1,250 mm) Infeed front load area, 7.4" (190 mm) min. opening, 2-post machine, left side fixed. Each side equipped with : -- 1st Station: Jump Scoring, 3 HP - 6,000 RPM motor. -... more
3
pressure: 80 t dayligth: 600 mm ram stroke: 200 mm pressure: 30 t dayligth: 680 mm ram stroke: 300 mm I3cqewz distance between columns: 1060 mm base plate surface area: 1060x600 mm table above floor: 720 mm ram stroke speed: Stößel/ Ram 1: 40 mm/sec ram stroke speed: Stößel/ Ram 2: 95 mm/sec base plate surface area: Dm=150 mm total power requirement: 13 kW weight of the machine ca.: 4,5 t space requirement approx.:: L:1,6xB:1,1xH:3,4 m Press with two ram with 30 t + 80 t foot control documentat... more
6
Pressure total: 315 ton Stroke: 350 mm Daylight: 540 mm Table surface area : 2.000 x 1.200 mm Ram surface area: 2.000 x 1.200 mm Required power: 65 kW Nbpvd Dimensions L x W x H: 4.400 x 2.950 x 4.800 mm Weight of machine approx.: 35 ton more
6
x-travel 6600 mm y-travel 3200 mm z-travel 1000 mm w-axis 1750 mm spindle motor 55 kW spindle turning speed range 5 - 2000 U/min spindle taper ISO 60 spindle diameter in front bearing 170 mm table lenght 1 + 2 6400 mm table width 2250 mm daylight between the side columns 2650 mm table load 50 t no. of tools in the magazine 60 Stück distance spindle nose and table 2500 mm control SIEMENS 840D feed range - table 10 - 15000 mm/min feeds crossrail-slide horizontal 10 - 10000 mm/min feed in w - axe... more
5
faceplate diameter:2240 mm swing diameter:2500 mm C2ljnkm88 turning height:1600 mm slides vertical travel:1200 mm workpiece weight:16 t horizontal adjustment:1390 mm angle adjustable from - to:+ - 30 Grad faceplate turning speed range:1,6 - 80 U/min main drive motor:65 kW total power requirement:70 kW weight of the machine ca.:36 t dimensions of the machine ca.:5,4 x 5,1 x 5,0 m In 2008 complete overhauled with new electric with two vertical RAM´s 4-axes digital readout HEIDENHAIN 2 gear ste... more
1
Elect./Voltage: 230 V, 60 Cy, 3 Ph. Grxinikni JENKINS 195 Double End Tenoner PLC ControlesStationsStation 1 (Trim Saw): (2) 7-1/2 HP, 3600 RPM,1-3/4” D X 5” L Self Tightening threaded Arbor, 12” Cap. Trim Saws, Vertical, Horizontal and Tilting Axis PositioningStation 2 (High Speed Jump Cope): (2) 7-1/2 HP, Belted to 7200 RPM, 1-1/4” D X 8” L Threaded Arbor, None Tilting Left and Right Hand Lower High Speed Jump Coping heads, Vertical and Horizontal Axis Position... more
5
pressure: 100 t no. of strokes: 35-100 Hub/min throat: 360 mm ram adjustment: 20-130 mm ram surface area: 750x550 mm clamping plate on table: 1000x640 mm adjustment of stroke: 90 mm passage between the columns longitudinal/sideways: 610x500 / 440x550 mm daylight dimension : table/slide low: 300 mm total power requirement: 17,5 kW weight of the machine ca.: ca,7,0 t 89f20wt2q dimension machine [...]: 1,9x1,4x2,7 m on the ram plate are 5 T-slots longitudinal center hole = 50mm [...] more
4
Pressure total: 315 ton Ram stroke: 400 mm Ram adjustment: 400 mm Shut height (stroke down, adjustment up): 750 mm Free frontal opening L-R: 2.510 mm Table surface area : 2.500 x 1.400 mm Ram surface area: 2.500 x 1.400 mm Cushion capacity in table: 63 ton Cushion stroke: 1650 mm Number of strokes: 25 [...] Required power: 55 kW Height over floor approx.: 6.650 mm Cxxj9zg Weight of machine approx.: 68 ton more
4
x-travel 4000 mm y-travel 3000 mm z-travel 1200 mm c-axis 360 ° b-axis 360 ° table load 35 t spindle taper ISO 50 spindle turning speed range 10 - 4000 U/min spindle motor 37/50 kW feeds longditudinal/cross/vertical 1 - 10000 mm/min rapid travel x/y/z 15000 mm/min spindle diameter in front bearing 140 mm distance table - lower edge spindle 1200 mm surface area 3500 x 1800 mm distance between columns 2300 mm Qxajjlxkf max. torque on the spindle 2650 Nm control FIDIA M20 max. torque on the spin... more
1

Planer-Type Milling M/C - Double Column KRAFT/Skymaster VF1615A (Highspeed)

D-64589 StockstadtGermany dealership location
6564 km
2018
as good as new (ex-display)
x-travel:1600 mm y-travel:1300 mm z-travel:700 mm distance between columns:1500 mm distance spindle center to table:225-925 mm table-size:1800 x 1300 mm table load:4000 kg T-slot (width-distance-quantity):22x 160 x 8 mm spindle taper:HSK-A 63 spindle speed:24000 U/min spindle drive:25/33 kW Spindle motor torque:72.6/95.8 [...] rapid traverse in x-y-z axis:30000 mm/min Cutting feed rate X/Y/Z axis:1~20000 mm/min Pthgai Tool changer:20 fach max. tool diameter:100/130 mm max. tool length:300 m... more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Bbylhjyjvz FRIULMAC Dual Feed Double End Cut-Off Saw:For squaring the work pieces and for transportation to a Planer or Moulder with a straightening table. -- 78.7" Max. (2,000 mm) opening from Saw to Saw. Motorized opening with LED readout on the control panel; left hand fixed with left hand fence line. -- Hopper magazine - material capacity: Min. length 7.87" (200 mm), max. 78.7" (2,000 mm); width 1-1/8" (30 mm) to 4.33" (410 mm) and thickness 0.39" (10 ... more
2
max. dia. of grinding wheel: 300 mm revolution per minute: 1500 U/min grinding wheel size: 300x40 mm table above floor: 920 mm total power requirement: ca. 2,0 kW weight: ca. 200 kg space requirements of the machine approx.: L:1,0xB:0,6xH:1,2 m Sriq2c grinding wheels mounted: diameter 280x40mm coolant tank 380V more
3
Pressure total: 350 ton Stroke: 900 mm Daylight: 1.400 mm Table surface area : 2.000 x 1.400 mm Ram surface area: 2.000 x 1.400 mm Cushion capacity in table: 60 ton Cushion stroke: 200 mm Cushion area: 1.500 x 650 mm Cxny0ff Approach speed: 500 mm / sec Working speed: 60 mm / sec Return speed: 450 mm / sec Stroke: 6.600 mm Weight of machine approx.: 58 ton more
15
We offer: Double winding device for paper rolls with crane traverse 2T The plant / machine is part of einere wallpaper manufacturing facility. You located on the top of the plant and served the settlement of the paper which is used in the plant to wallpaper. The display is refined even further. The plant originates from the assets of the paver in a wallpaper for Vinylstruckturtapeten or Flachvenyltapeten. It is part of a complete wallpaper manufacturing line up 2011 has produced. ... more


double reel
every day

New machines via email!

Be informed!

to

to

Change search
DOUBLE REEL
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,49 per ad.
Find out more now


Phone: +1 312 94 04 581
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machineseeker chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close