Double fold buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
1
Sheet thickness: 0.8 mm, in metal box, to close the angle and double Groove, machine will be repaired by a qualified technician, tested, clean and is fully functional. Test run is performed. Machine currently in revision Machine 1 Color: grey Total power requirements: 230 V Rebate height: 25 mm Cj9tjjki Number of cylinders: 4 more
1
Sheet thickness: 0.8 mm, in metal box, to close the angle and double Groove, Machine repaired by a qualified technician, tested, clean and is fully functional. Test run is performed. Machine currently in revision, Machine: 2 Machine weight: 22 kg Color: grey Tywkbsv9 Total power requirements: 230 V Rebate height: 25 mm Number of cylinders: 4 more
3
to close the Winkelfalzes, with 4 castor set in tin box, good condition working width: 3 mm sheet thickness: 0.8 mm seam height: 25 - 60 mm Speed: 5.5 to 13 m / min, weight: 21 kg Hibjthlt more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Wny2g S. A. WOODS 525 BM-2 End Matcher;(1) Left and (1) Right separated shaper units. -- Tongue unit with: Trim saw approx. 5 HP motor, (1) set of Top/Bottom. heads approx. 5 HP motors for machining the tongue. -- Grooving unit with: (2) sets of Top/Bottom units (4 heads total) for machining the groove, approx. 5 HP motors on each. -- Part Dimensions: Approx. 3/8"" - 1"" Max. stock thickness, 8"" Max. width, and 10"" min. by 7.5' Max. length. -- ... more
3
Used Powered box & pan folder ? 3metre x 3mm powered box and pan folder M8w7d     more
3
A.COSTA double spindle multi-rip saw, type Jaguar/2/75 Manufacture year 1991 Machine specifications - Max. cutting width 350 mm - Width of feeding chain 370 mm 2dil7lmbq - Max. cutting height 200 mm - Max. saw blade 320 mm - Saw motor 2 x 75 Hp each - Electric setup for cutting height and saw spindles - Mechanical readout for positioning saw spindles - Adjustable feed speed - Feeding chain in good condition more
6
spindle diameter 150 mm x-travel 1500 mm distance between columns 3000 mm quill stroke 280 mm travel -y axis 1450 mm travel -z axis 800 mm spindle taper ISO 50 Qmd3rjzfe spindle turning speed - stepless 0 - 3000 U/min table surface area 1750 x 1650 mm table load 5000 Kg distance spindle nose and table 1050 mm spindle drive 25 kW total power requirement 40 kW weight of the machine ca. 13 t dimensions of the machine ca. 5 x 4 x 3,5 m • HEIDENHAIN TNC 145 control more
6

Double side squaring edge bander HOMAG KL 26/8/A12/30/S2

Düsseldorf Germany
6383 km
2002
used
Offer
Another 37 days
Dimensions (l x w x h) approx.: 8610 x 6700 x 2000 mm Weight approx.: 11000 kg Description: SQUARING AND EDGEBANDING MACHINE DOUBLE SIDED Max working width 3000 mm Driving chain is rurring by roller bearings Top pression unit made by motorized rubbered belt Adjusting in continuos feeding speed WORKING UNITS ON THE SQUARING SIDE Pre milling unit to rectify the side of the panel GLUING UNIT Roller set to press the edge on straight profiles - nr 1 + 6 pression rollers - motorized regulati... more
3
grinding dia max continuous grinding 80 grinding dia rotary grinding 80 grinding dia min rotary grinding grinding dia min continuous grinding grinding wheel diameter 600 mm grinding wheel speed 45 m/sec workpiece width - max. 80 mm max. workpiece diameter 65 mm grinding spindle drive 2 x 21 kW spindle stroke 190 mm spindle turning speed range 300 - 1100 U/min control SIEMENS 840D total power requirement 50 kW weight of the machine ca. 9 t dimensions of the machine ca. m Qxaa8kzzj - C... more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Eqbtbct DOUCET EM-2 End Matcher, Double Ended:Capacity & Description: -- 12"" Min. to 96"" max. length x 1-3/4"" to 5"" width x 3/4"" thick cap.; includes a traverse bar conveyor 21' long x 5' wide; bar spacing is available at 12"" or 8"" center to center. -- Basic system is powered by a 3 HP variable speed main drive (20 - 60 FPM) and is equipped with independent tongue & groove machining centers laid out on opposite sides of the transport table. -- C... more


double fold
every day

New machines via email!

Be informed!
2
New Box and Pan Folder 1260mm x 1.5mm New Box and pan folder, many other sizes and capacities avaialble. Working Length: 1260mm Folding capacity: 1.5mm Top beam stroke: 40mm Max folding angle: 135 degree Bauu9uwqrc Length: 1600mm Width: 880mm Height: 1180mm Weight: 450kg more
3
A.COSTA double spindle multi-rip saw, type Jaguar/2/75 Manufacture year 1991 Machine specifications - Max. cutting width 350 mm - Width of feeding chain 370 mm - Max. cutting height 200 mm 2dilt0gnp - Max. saw blade 320 mm - Saw motor 2 x 75 Hp each - Electric setup for cutting height and saw spindles - Mechanical readout for positioning saw spindles - Adjustable feed speed - Feeding chain in good condition more
1
grinding wheel diameter 200 x 32 mm no. of working stations 2 Stück manually feed ja 0 motor speed 3000 U/min Ctzez9jso voltage 220 / 380 V total power requirement 0,75 kW weight of the machine ca. 100 KG dimensions of the machine ca. m • Bench grinder, double-sided • with base frame more
6

BLADIS Double Cross-Cut Saw BLADIS

Düsseldorf Germany
6383 km
used
Offer
Another 7 days
Dimensions (l x w x h) approx.: 6200 x 1200 x 2100 mm Weight approx.: 1500 kg Description: With 2 tilting heads 0/45°. Max opening 5000 mm Bbajwrgqdw In Online Auction with approx. 165 further Machine Tools and other Assets! Bidding ends: Tuesday, 27 February 2018 from 2pm (local time) Auction start price: EUR 2.000 (plus VAT and 15% buyers premium) Your contact person: Simone Clini more
1
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Baapdn8zn2 DOUCET EM-2 End Matcher, Double Ended;Specifications: -- 12"" Min. to 96"" max. length x 1-3/4"" to 5"" width x 3/4"" thick cap.; includes a traverse bar conveyor 21' long x 5' wide; bar spacing is available at 12"" or 8"" center to center. -- Basic system is powered by a 3 HP variable speed main drive (20 - 60 FPM) and is equipped with independent tongue & groove machining centers laid out on opposite sides of the transport table. -- Capaci... more
3
M8w3zUsed Walton Box and Pan Folder, Folding Machine 2500 mm x 14 Guage /w segmentierte Finger more
2
pulling force - max. 4 t diameter 3 - 30 mm drawing length max. 8500 mm D o u b l e - c h a i n d r a w i n g b e n c h for t u b e s Bryxsmhq (complete line with pre-bench) Make: BÜLTMANN New-in: 1991 Condition: very good Drawing force 4 to. Working range non-ferrous material: Pretube-outer Ø: max. 30 mm Finished tube outer Ø: min./max.: 3,00 - 25,0 mm Fnished tube wall thickness: min./max.: 0,20 - 1,2 mm Pretube length: min./max.: 2500/8000 mm Finished tube length: min./max.: 3000/850... more
1
grinding wheel diameter 200 mm no. of working stations 2 Stück manually feed ja 0 motor speed 3000 U/min Zsp2z28n voltage 220 V total power requirement 0,42 kW weight of the machine ca. 80 KG dimensions of the machine ca. m • Bench grinder, double-sided • with base frame more
6

Double Veneer Guillotine EMME -ELLE TO 2T 2800

Düsseldorf Germany
6383 km
2007
used
Offer
Another 8 days
Dimensions (l x w x h) approx.: 4750 x 2500 x 1800 mm Weight approx.: 9000 kg Description: Two blade cutting machine, Cut lenght 1st and 2nd blade 2850 mm, Max. Cut height 90 mm, Minimum cutting width 10 mm. Safety guards and photoelectric barriers level 4. CE Standards In Online Auction with approx. 22 further Machine Tools and other Assets! Bidding ends: Wednesday, 28 February 2018 from 12pm (local time) Auction start price: EUR 11.200 (plus VAT and 15% buyers premium) F2tiv9dvu Your contac... more
5
Bending tool, die, Oberrmesser, upper tool, upper cheek, Ev9lksp Tool for bending machines Dimensions 90 x 25 mm Length 1630 mm Weight 20 kg more
1
Elect./Voltage: 575 V, 60 Cy, 3 Ph. Ba3n00qguc FRIULMAC Quadramat Double End Tenoner -- 2,500 mm (98"") Max. x 180 mm (7"") min. opening -- Loading space 642 mm (25"") -- Thickness 10 - 100 mm (0.4"" to 3.9"")Equipped With: -- Hogging/ Trim - Hogging/trim - Jump cope - Cope. -- Motorixed opening with LED readout on the control panel, approx. 25"" infeed in front of hold downs. -- Variable speed feed 4 - 30 M/min. (13 - 98 FPM), feed motor 4.5 HP -- Feed chain 2-7/8"" wide and with rubb... more
2
KEETONA HUF 100? X 1/4? (2540MM X 6MM) 100 inch x 6mm 60? X 5/16? (1524MM X 8MM) OR 40? X 3/8? (1016MM X 10MM) HYDRAULIC FOLDER WITH ELGO 89 P23 2 AXIS PROGRAMMABLE CONTROL Capacity : 100? X 1/4? (2540MM X 6MM), 60? X 5/16? (1524MM X 8MM) OR 40? X 3/8? (1016MM X 10MM) Control: ELGO 89 P23 Top beam rise & fall: 7? (178MM) Bottom beam adjustment: 2? (51MM) Cxsw8sy3 Maximum length of bend: 100? (2540MM) Input: 400/440/3/50 AC 10 HP APPROX Fitted with: FULL LENGTH TOP SEGMENTAL TOOLING Equipment: F... more
4
Double high precision mitre saw Max. cutting length: 3,6 m (adjustment over rack and pinion by handwheel) Bajswh3jei Sawblade diameter: 350 mm Both units swivelling -45°/ +45° Pneumatic stroke over twin round bars Pneumatic clamping more
1
number of stapling heads 2 voltage 220 V Dhu82p893 frequency 50 Hz dimensions of press (L x W x H) 60 x 70 x 105 cm weight ca. 100 kg more
6

Double-Sided Cantilever Rack -

Düsseldorf Germany
6383 km
used
Offer
Another 14 days
Dimensions (l x w x h) approx.: 5000 x 3500 x 3500 mm Weight approx.: 1200 kg Description: See photos In Online Auction with approx. 142 further Machine Tools and other Assets! Bidding ends: Tuesday, 06 March 2018 from 10am (local time) Auction start price: EUR 1.270 (plus VAT and 15% buyers premium) Bbewbomz8t Your contact person: Simone Clini more
5
Kragarrmregal, heavy load shelving -Double-sided -bestehend from: rack with 3 stand height 5,4 m Arms both sides 500 mm long Building strength 795 kg -Traglast per page max 7000 kg -verschraubt Enkzas0 -4 x shelving available Price per piece -Einlegewannen can be bought extra even other quantities and heights on request available transport dimensions 5450/1250/H500 mm Weight 1250 kg / piece more
1
Elect./Voltage: 460 V, 60 Cy, 3 Ph. Cqxfsphxw Material length 9"" to 80"" opening with Trim saws; Motorized opening with LED readout on the control panel; Left hand fixed with left hand fence line. -- Hopper magazine for material capacity: Minimum length 9"" (230 mm), max. 80"" (2,000 mm); width 0.8"" (20 mm) to 6-3/4"" (160 mm) and thickness 0.4"" (12 mm) min. up to 3.14"" (80 mm) maximum. -- Each side equipped with: (2) Trim saw motors 5.36 HP; saw blade dia. 15.75"" (400 mm). -- Hydra... more
6
Used RAS Multibend Centre CNC Folder Max working 2560mm Max sheet thickness (mild steel) 2.0 (2.5mm) Max sheet thickness (stainless steel) 1.5mm Max sheet thickness (aluminium) 3mm Finished part length min. (w/o corner tools) 200/250mm Finished part length (w. small corners) 380/430mm Finished part length min (w. large corners) 430mm / 480mm Finished part width min. (inside) 150 (140mm) Wp3q0 Finished four sided part height max 203mm Side free space corner tools (small/large) 30/ 50mm Folding b... more
2
pressure 25 t no. of strokes 100-1000 Hub/min sheet width 150 mm ram - range of adjustment 10-50 mm table surface area 400x400 mm ram surface 400x270 mm tool hole in ram Ø 40 mm hole in the table 370x90 mm max. tool weight 120 kg total power requirement 7,5 kW Gnsfuhouw weight of the machine ca. 3 t dimensions of the machine ca. 1500x1800x2200 mm more
6
faceplate diameter 5300 mm swing diameter 6300 mm turning height 3500 mm max. ram stroke 1800 mm table load ca. 80 t faceplate turning speed range 0,35 - 14 U/min feed range 0,063 - 11,2 mm/min swivel range of slides - vertical +/- 30 ° cross rail - adjustment 3300 mm tool travel 3450 / 1000 mm turning tool - shaft cross cut 50 x 50 mm crossrail -rapid travel 500 mm/min rapid travers - turret head, hor./vertical 960 mm/min dimensions of the machine ca. 14,2 x 8,2 x 9,7 m total power requirement ... more
6

Double Head Mitre Saw for Aluminium MECAL ARGUS SW 452

Düsseldorf Germany
6383 km
1995
used
Offer
Another 16 days
Dimensions (l x w x h) approx.: 5200 x 1800 x 2000 mm Naw2v Weight approx.: 1500 kg Description: Internal reference MET. COR. 140338 / M16, Serial number 91727, Control EC4000, Powered positioning of the movable head, Cutting workpiece maximum approx. 4000 x 150 x 150 mm, Tilting heads, Blade saw diameter 450 mm, 2 horizontal pneumatic clamps and 2 vertical ones In Online Auction with approx. 65 further Machine Tools and other Assets! Bidding ends: Thursday, 08 March 2018 from 12pm (local time... more
5
Bending tool, die, upper blade, upper tool, upper cheek Tool for bending machines Hictqvmrs -Spitzes tool dimensions 16 x 73 mm Length 1250 mm Weight 10 kg more
1
Elect./Voltage: G0rwyjf FRIULMAC Quadramat Double End Tenoner -- 2,500 mm (98"") Max. x 180 mm (7"") min. opening -- Loading space 642 mm (25"") -- Thickness 10 - 100 mm (0.4"" to 3.9"")Equipped With: -- Hogging/ Trim - Hogging/trim - Jump cope - Cope. -- Motorixed opening with LED readout on the control panel, approx. 25"" infeed in front of hold downs. -- Variable speed feed 4-30 M/min. (13'-98""/min.), feed motor 4.5 HP -- Feed chain 2-7/8"" wide with rubberized pads -- Top pressu... more
5
Used RAS 62.30 Turbobend CNC Folder Year 2014 Sheet thickness 2mm, Working length 3,200mm Dygxme2 back gauge depth 6 ? 1,550mm, back gauge accuracy +/- 0.15mm, accessories more
3
Mt909Xerox 6204 Wide Format Printer / scanner / Folding more
3
faceplate diameter 2500 mm turning height 1500 mm turning diameter over bed 2700 mm 3hhbjfiwq turning speeds 1,9 - 60 (16x) U/min voltage 380 V total power requirement kW weight of the machine ca. t dimensions of the machine ca. m more
6
Dimensions (l x w x h) approx.: 2700 x 1600 x 1500 mm Weight approx.: 1100 kg Description: Power Motor 3 Hp, Maximum piece length 1200 mm, Minimum piece length 400 mm, Piston charger, Carrying tool, Head rotation, Degrees rotation 0-10º, with head inclination, Degrees inclination 0-25º, Manual opening Voltage 220 three phase with star start, triangle In Online Auction with approx. 40 further Machine Tools and other Assets! Bidding ends: Thursday, 22 February 2018 from 10am (local time) Auction ... more
1
Elect./Voltage: 230/460 V, 60 Cy, 3 Ph. Ekc8ufp JENKINS 123 Double End Tenoner with Trim, Cope and Sanding -- 96"" Motorized opening with indicator, 43"" load space in front of holddowns, right side fixed, 2-post machine. Each side equipped with -- 1st station: Tilting trim/hog saw, 10 HP - 3,450 RPM motor; -- 2nd Station: High speed Cope head, 7.5 HP - 6,000RPM motor, 1 1/4"" spindle -- 3rd Station: Belt sanding unit, 5HP motor. -- Variable feed speed 15 -45 FPM, -- Rubber padded f... more
1
table-size:350 x 220 mm onesided diamant-cup wheel:150 mmØ other side white fused alumina-grinding wheel:100 mmØ motor:380 50 0,37/0,45 V Hz kW built-in programme automatic: adjustable, oscillating table: Udc9cupds more
2
Saw length: 4500 mm Maximum blade diameter: 550 mm Pneumatic pop-up up material support arm Juqliq Digital angle display Automatic positioning on PC control more
3
faceplate diameter 2000 mm turning height 1500 mm turning diameter over bed 2400 mm table load 10 t turning speeds 2 - 100 (18x) U/min voltage 380 V total power requirement kW weight of the machine ca. t Eedxsst dimensions of the machine ca. m more
6

Double-Sided Cantilever Rack -

Düsseldorf Germany
6383 km
used
Offer
Another 14 days
Dimensions (l x w x h) approx.: 5000 x 3500 x 3500 mm Weight approx.: 1200 kg Description: See photos Namwv In Online Auction with approx. 142 further Machine Tools and other Assets! Bidding ends: Tuesday, 06 March 2018 from 10am (local time) Auction start price: EUR 1.300 (plus VAT and 15% buyers premium) Your contact person: Simone Clini more
5
Bending tool, die, Oberrmesser, upper tool, upper cheek, Voioo Tool for bending machines Dimensions 60 x 15 mm Lenght 1020 mm Weight 6 kg more
Elect./Voltage: 600 V, 60 Cy, 3 Ph. Bbiqww2nwg HOMAG NFL 26/8/25 Double End Tenoner -- Capacity.32 to 3.9"" (8-100mm)m 7.6"" to 98"" (190-2500 mm) opening Motorized (2-speed) opening with NC 21 Line control & screen display. -- 49""(1250mm) infeed front load area, 7.4""(190 mm) min. opening, 2-post machine, left side fixed. Each side equipped with : -- 1st Station: Jump scoring, 3 HP - 6,000 RPM motor; -- 2nd Station: Hog/trim saw,6 HP - 6,000 RPM motor -- 3rd Station: Universal Cope/mil... more
5
Bending machines / press Make Unicorn Bbitwctwag Working width approx. 2000 mm Sheet metal thickness 2 mm The suspension of the counterweights was already welded (see photo). Weight approx. 1650 kg Pictured in the photos. more
6
pressure 125 t distance between columns 1290 mm Czik97qq stroke 18-150 mm table surface area 1250x630 mm hole in table 600x160 mm ram surface 1100x600 mm strokes - infinitely variable 45-80 Hub/min ram - range of adjustment 90 mm dayligth 400 mm total power requirement 15 kW weight of the machine ca. 15 t dimensions of the machine ca. 2700x1800x3200 mm more
6

Double-Sided Cantilever Rack -

Düsseldorf Germany
6383 km
used
Offer
Another 14 days
Dimensions (l x w x h) approx.: 5000 x 3500 x 3500 mm Weight approx.: 1200 kg Description: See photos Bbewbx79su In Online Auction with approx. 142 further Machine Tools and other Assets! Bidding ends: Tuesday, 06 March 2018 from 10am (local time) Auction start price: EUR 1.270 (plus VAT and 15% buyers premium) Your contact person: Simone Clini more


double fold
every day

New machines via email!

Be informed!

to

to

Change search
DOUBLE FOLD
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close