Used Double End Miter Saw for sale (21,935)

Condition: excellent (used), Year of construction: 1990, functionality: fully functional, HM circular saw blade for aluminum and plastics, 420 x 3.2 x 40 mm, 108 teeth, negative tooth angle Hedpfezu Azdex Ag Rsfn Hydraulic feed brake Pneumatic material clamping system, on both sides from above Pneumatic saw blade spray system Pneumatic maintenance unit, consisting of a water separator, pressure reducing valve with pressure gauge, and oiler Crosscut fence for cutting angled pieces Machine stand

Condition: ready for operation (used), The U2PRW cutting and drilling machine is designed for processing slats and furniture fronts made of solid wood or MDF. The machine works in a semi-automatic cycle. During one cycle the machine performs: cutting at a given angle (in the range of 45 - 90 degrees) and drilling in the jammed plane, or the edge of the element. - Made in Poland TECHNICAL PARAMETERS: max. height of cut material 60 mm max. width of cut material at an angle of 45° 70 mm max. width of the material at an angle of 90° 150 mm max. length of cut material 2200 mm Hfedpfeq Ii Dlox Ag Ron min. length of cut material at 45° 455 mm diameter of main saw 250 or 300 mm undercutter diameter 100 mm max. diameter of bottom milling cutter 35 mm max. depth of bottom milling 15 mm diameter of face drill embedment and bottom milling cutter 10 mm Drill head (face drilling): spindles 4 axial spacing of spindles 32 ; 32 ; 40 mm linear arrangement of spindles max. depth of face drilling 60 mm installed power 7 kW working pressure 0.6 Mpa overall dimensions (length / width / height) 4300 / 1600 / 1570 mm Machining units The machine is equipped with two machining units. The left unit, which is fixed, and the right unit - a sliding unit. Each machining unit consists of the following sub-assemblies - units: a main saw, an undercutting unit, a drilling unit that drills into the jammed plane, and a drilling unit that drills into the bottom of the workpiece. Bottom hole drilling unit The described aggregate is installed as an option. It is used in the processing of corner ties for doorframes with adjustable width. It makes a blind bore , for the can connector. The picture shows the mounted red cover which is at the same time the base for the machined angle strips and the cover with chip extractor. Workpiece pressure The machine tool is also equipped with a clamping system operating in two planes. The clamping area includes horizontal and vertical clamps. The horizontal clamps are responsible for pressing against the vertical bases and straightening the workpiece. Vertical ones, on the other hand, are responsible for immobilizing the workpiece during machining. The horizontal pressure always precedes the vertical pressure. Control The machine's control is clear, easy to use and functional. It allows switching on or off all aggregates separately, additionally with division into left and right sides. All aggregates have independent drive. The right-hand processing unit is set by pressing the control buttons on the control panel. The executive mechanism is a gearbox with an electric motor driving a trapezoidal screw. An electronic control system US with an operator panel and digital display is used to read and set the length of the workpiece. This system is also responsible for automatic corrections to the counter readings when the cutting angles change by 45° and 90°. In addition, it is responsible for automatic basing.

Condition: used, Aluminium window production machines for sale. 2 x DGS Emmegi NORMA 400, notching saw GRAULE AS450, 2 x corner press ELUMATEC, copy router ELUMATEC, notching mill RINALDI, punch ANC001FL, glazing bead saw EMMEGI 300s. Hfjdpfxjxvaw Se Ag Ren

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, maximum distance between units: 3.3 m two motors, 2.2 kW each blade tilt adjustable cutting angle in the range of -45/+45 degrees Hfjdpfezxpr Dsx Ag Ren maximum blade diameter: 330 mm pneumatic clamping devices blade speed: 3765 rpm CE marking

Condition: ready for operation (used), Year of construction: 1985, An old but fully functional IMA double-end profiler is available. Working width: 2000mm, max. cutting height: 35mm, machine dimensions X/Y/Z: approx. 4000mm/6000mm/3000mm, weight: approx. 3000kg. Documentation available. An on-site inspection is possible. Hfedjzc Rdkopfx Ag Rjn

Condition: used, Year of construction: 1995, cutting width 375 mm Cutting height 150 mm dimensions of saw-blade 500 x 30 mm Motor output 2 x 3 kW Cutting length 5100 mm speeds 2800 U/min Hodpfxotv Rgro Ag Rjfn air pressure 6 bar weight of the machine ca. 700 kg dimensions of the machine ca. 6100 x 1450 x 1450 mm * Profile support plate made of steel * Stable cast construction of the saw unit * Large cutting range, 2 profiles can be cut at the same time * Easy adjustment of the moving unit with roller guides * Double storage of the swivel device * Safe clamping thanks to the two-pressure system * Double saw feed guide * Hydropneumatic saw feed * External dimension correction scale * Left saw unit fixed * Swivel range 45°-90° * Including suction (without piping) ALKO Mobil-Jet 100 year of manufacture 2002

Condition: used, Year of construction: 2004, double end profiling machine for the door and windows production Hfjdpfx Asdfx Hcsg Rjn working width 4000 mm 3 aggregates on each side 1 x saw 2 x vertical miling aggregate - spindle stroke 800 mm! long side profiling machine with 16 spindles machine comes with a lot of spare parts! further technical data on demand Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Double-end face/edge trimmer Hfsdpfx Asz Nlcrsg Rjn

Year of construction: 1983, condition: good (used), RÜCO Double Miter Saw, Type 22 Year of Manufacture: 1983 Serial Number: 10860 Working Area: Cutting size: 2600 x 2200 mm Minimum cutting width: 210 mm Cutting height: 100 mm with saw blade Ø 450 = 125 mm Technical Data: Saw blades can each be swiveled by 45° 2 x Main motor: 4.0 kW, saw blade Ø 400 mm 2 x Scoring saw: 0.56 kW, saw blade Ø 140 mm Hfodpfx Agsin E Rqj Ren Weight: 1400 kg Space requirement: approx. 4400 x 4000 H 1000 mm Transport dimensions: approx. 4400 x 1300 H 1300 mm Technical data subject to change.

Condition: new, 0 3.700mm, 5.100mm, 6.100mm mm Working height 160 mm 0 ja Control ja Hsdpexmk Agsfx Ag Rsfn

Condition: reconditioned (used), functionality: fully functional, Total length 3800 mm, two units, swivels 45° in both directions, cutting width 150 mm, extraction 2x 90 mm Ø – completely workshop overhauled. Hfodpfex Ezycsx Ag Ren

Condition: new, 0 4000,5000 mm Working height 120 mm 0 ja Hfsdpjxmk Amsfx Ag Rsn

Condition: new, mm Hfsdpoy I Dcfefx Ag Ren Working height bei 90° = 315 mm 0 45°/90°/45° 0 weight 2050 kg Cutting height at 45° 230 mm

Condition: good (used), Code: 0246 Brand: OMGA Model: TR 2B - NC - CE Standard Automatic double mitre saw with numerically controlled positioner for cutting frames, wood profiles, furniture, wooden window frames, doors, plastic materials, and various - CE standard Technical data: Numerically controlled positioner: allows cutting lists to be stored and the moving head to be positioned automatically Cutting length 3500 mm Blade diameter 350 F 30 mm Motors each 2,2 Kw Rpm 3000 Cutting width 170 mm Cutting height at 90° 102 mm N° 2 vertical pneumatic pressers Suction mouth diameter 80 mm Compressed air 6-7 bar Hfsdpfoxztydjx Ag Rjn Overall dimensions mm 4400 x 1000 x 1500 h Weight kg 600

Condition: as good as new (ex-display), Year of construction: 2025, Semi-automatic under-table crosscut saw, including: - 2 meter roller conveyor to the left of the saw with 1 manual folding stop and 1 pneumatic folding stop - 2 meter roller conveyor to the right of the saw General Technical Data: Maximum cutting area: 220 x 125 / 260 x 100 / 285 x 80 / 310 x 50 mm Saw motor: 5.5 kW Saw blade diameter: 500 mm (Z = 108) Rotational speed: 2,800 rpm Compressed air: max. 8 bar Extraction connectors: 1 x 120 mm / 1 x 100 mm Voltage: 400 V / 50 Hz / 3 Ph. Working height: 900 mm +/- 20 mm Standard equipment: Automatic protection and pressure device Two-hand operation and safety shield Carbide-tipped saw blade SAFE The ergonomically positioned two-hand control and safety guard around the saw blade ensure absolutely safe operation. Safe, protected, and reliable! ROBUST Legend saws are designed and built to work with challenging materials and hard wood even under tough conditions. The frame is made of thick-walled, fully reinforced and coated steel. Robust, compact, and durable. Hfsdow Rcibjpfx Ag Rsn FAST Compared to a pull or radial arm saw, the LEGEND pneumatically guides the saw blade through the workpiece at extremely high speed. This significantly reduces the physical burden on the operator.

Condition: used, Technical specifications: Maximum saw blade diameter: 300 mm Maximum cutting width with two blades: 2700 mm Minimum cutting width with two blades: 250 mm Capability for angled cutting Motor power: 2 x 2.2 kW Power supply: 380 V Dimensions: Height: 1300 mm Hfedszht Tqspfx Ag Ren Length: 3600 mm Width: 1000 mm

Year of construction: 2005, condition: good (used), I sell the double mitre saw OMGA TRF 527, year 2005. Cutting length 390 - 2800mm Cutting width max. 170mm Cutting height max. 90mm Tilting heads 0 + - 45° 2 Horizontal + 2 Vertical pneumatic Material pressures Hedpfx Agog Tumco Refn 2 Motors x 1,62kW (2,2 HP) Good condition. Available immediately.

Condition: used, Technical specifications: Max. blade diameter: 300 mm Max. cutting height: 110 mm Max. cutting width: 2,800 mm Adjustable blade angle up to 45° Pneumatic clamping system Pneumatic blade lifting Operating pressure: 6 bar Hedpfxezhubis Ag Rsfn Safety switch Power supply: 400 V Motor power: 2.5 kW Overall dimensions: Length: 1100 mm Width: 3600 mm Height: 1300 mm

Condition: excellent (used), functionality: fully functional, Motor power 2.2 kW Manual feed of the aggregates Blade diameter 330 mm 3000 rpm Maximum aggregate spacing 3300 mm Cutting angle adjustment -45/+45 degrees Vertical pneumatic clamps Cutting process started by foot pedal Hjdsy N Ribspfx Ag Rsfn Safety switch Width 900 mm, height 1500 mm

Year of construction: 2023, condition: new, functionality: fully functional, Description Double mitre saw RAPID DGL 200 M Working length: 5,100 mm Working height: 160 mm Can be swiveled: yes Aluminum spraying device available Short dimension stop available Socket for external extraction available Vertical clamping device available Roller conveyor traveling (feed on the right) Rapid DGL 200 M double mitre saw ----- with saw blade diameter 500 mm, manual length adjustment with digital length display digital length display, pneumatic angle adjustment 45° and 90°, Simple operation and top quality ----- For precise and low-burr cutting of aluminum, plastic and wooden profiles. System features: ----- - Manual length and angle adjustment - Saw blade Ø 500 mm - Extremely stable machine bed - Complete grip of the guide bushes around the guide shafts of the saw head - Hardened guide shafts - Swivel axis mounted on both sides Digital length display: ----- Perfect dimensional and angular accuracy guaranteed. ----- To achieve this, we use precise and efficient movement technology: Ball bushing guides for length adjustment, spring suspension of the swivel units for convenient and safe angle adjustment between 45° and 90°. The length and angle of this two-head mitre saw are adjusted manually. Greater ease of use and increased performance can be achieved with the aid of a digital length display and pneumatic swivel device. A wide range of profile systems can be processed with 500 mm saw blades. can be processed. Technical data ----- Drive: 2 x 2.2kW three-phase 400 volt motors Swivel range: manual 45° to 90 Saw blade: 500 mm diameter Cutting lengths: 5,100 mm, Profile clamping: 2 horizontal clamping cylinders Length adjustment: manual Air pressure: 7 bar Dimensions: 5250/1420/1900mm weight: 1.260kg Hfedpfx Agetdgits Ren

Condition: excellent (used), Independent machine (standing alone) and/or Universal machine (First & Second in a line) It is 2nd DET in the X10023 LINE Electronic Programmer OMRON Hodpfx Ageyz Si Hs Rjfn Safety and sound-proof enclosure Electric and command cabinet No. 3+3 Vertical columns to support the working units As a second machine, it accepts panels 1900 mm deep Min. useful working width (mm) 300 Max. useful working width (mm) 2500 Min. useful working thickness (mm) 6 (ca.) Max. useful working thickness (mm) 60 Distance between center-axes of the disappearing dogs (mm) 400 Adjustable (min/max) feeding speed (m/min) 4-24 Total installed power Kw 65 No. 3 Working groups (for each machine's side): - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) - 1 Standard vertical NC Milling Unit (useful height 500 mm ca.), belt drive motor (9.2 kW at 3000 rpm) - 1 Jumping vertical NC Milling Unit (useful height 300 mm), belt drive motor (9.2 kW at 3000 rpm) NOTE: These 3 main vertical Milling units are NC controlled, with horizontal and vertical adjustment - 1 Free space

Year of construction: 2025, condition: used, M.S.K. / Tryma OMRM 133 Sawing Machine + TM-127 Copying Router (Set of 2 machines, 2025) We offer this complete set of two virtually new machines for processing aluminum and PVC profiles (Year of manufacture: 2025). The machines can be purchased together as a set or individually. 1. M.S.K. / Tryma OMRM 133 (TM-133) Automatic 2-Head Sawing Machine - Asking price for individual sale: €31,500 excl. VAT (New value: €37,420 excl. VAT) - Specifications: Year of manufacture: 2025 | Serial number: 25DCM330004 | Power: 6.5 kW | 400 V (50 Hz) | 1220 kg - Suitable for quickly and accurately sawing PVC and aluminum profiles - Equipped with 2 saw blades, diameter 550 mm - Console with industrial PC and integrated label printer - Automatic opening and closing of the safety guards - Horizontal and vertical pneumatic profile clamping Hjdpey Encwjfx Ag Rsfn - Fixed left head and automatically adjustable right head with roller conveyor - Servo motor guarantees fast movement and precision via linear guides - Pneumatic tilting of heads (90° / 45° inward) + mechanical adjustment for intermediate angles - Sawing length max. 5,000 mm (overlengths up to 7,500 mm possible, min. length 290 mm) - Including central support for support and dust extraction option 2. Tryma TM-127 Manual Copying Router Machine (3 spindles) - Asking price for individual sale: €9,500 excl. VAT (New value: €11,330 excl. VAT) - For quickly and easily routing PVC and aluminum profiles - 3-sided processing without reclamping (1 vertical and 2 horizontal copying heads) - Horizontal and vertical templates with standard operations - Automatic locking of cutting depth via pneumatic clamps - Horizontal and vertical pneumatic pins (4, 6 and 8 mm) - Smooth movement via recirculating ball bearings, shock absorbers and ergonomic handle - Including roller conveyors of 1,500 mm (left and right) and pneumatic cooling spray - Profile height: min. 40 mm / max. 110 mm | Profile width: max. 150 mm If you have any questions, are interested in the complete set or an individual machine, please feel free to send us a message or call us.

Condition: new, The cutting angle can be continuously adjusted manually within a range of 90° to 45°. Highly precise material feed, even with multiple feed cycles when cutting longer workpieces. Individual feed length: 500 mm. High feed rate possible while maintaining maximum accuracy. Hfjdpfx Aoztva Deg Ron The 7.5-inch color touchscreen enables simple and intuitive control of all machine functions. The control unit allows programming of up to 60 programs for quick adjustment of the feed length. The machine can be controlled fully automatically, semi-automatically, or manually. The standard equipment includes control of the feed pressure, a stationary clamping device, and the feed rate. A frequency converter enables continuous adjustment of the saw blade speed within a range of 15-90 m/min. Cutting range examples: 90° round: 260 mm 90° square: 245 mm 90° rectangle: 245 x 250 mm +45° round: 180 mm +45° square: 170 mm +45° rectangle: 180 x 120 mm Including: Coolant system Pressure gauge for saw blade tension Mechanical saw brush Material slide

Condition: good (used), Double-end tenoner, brand SCM, model Concept 2000, complete with electronic feed and height adjustment. Chipbreaker on the right and left spindles. Timing shaper cutter + fixed shaper cutter on the right and left spindles. Shaper cutter with grinding wheel on the right and left spindles. Belt sanding unit on the left spindle. Inverters on all shaper cutters. Working width 3000 mm. Pin ejection with selector. Hjdpfx Aozfprkjg Rofn Track shoe width 50 mm for processing narrow parts. Machine in perfect condition, ready for use.

Condition: used, Hüllhorst DH54S Machine number: 03974 Circular saw drive: a) 2 motors: 5 HP each b) Speed: 3000 rpm c) Circular saw diameter: 400 mm d) Circular saw blade thickness: 2.6 mm e) Circular saw bore: 35 mm Working range: a) Standard machine: 2200 mm cutting depth and 2200 mm cutting width Hsdpoxrzfvefx Ag Rjfn b) Custom cutting depth: up to 2500 mm c) Custom cutting width: up to 3000 mm d) Minimum cutting width: 210 mm e) Maximum cutting height: 100 mm