Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
1
pressure 63 t distance between columns 320 mm B2lvljhw stroke 8 - 120 mm table-size 800 x 600 mm ram surface 500 x 400 mm throat 315 mm dayligth 410 mm ram adjustment 70 mm no. of strokes 56 / 90 Hub/min total power requirement 6 kW weight of the machine ca. 5,5 t range L-W-H 2,10 x 1,52 x 2,72 m inclinable more
4
Double upright eccentric press with renewed control Siemens S 7 Manufacturer: Paul Mueller type: PZE 315 x 1300 RIHK built: 1990, the press was 2015 completely overhauled Force Max at 30 ° before UT 315 tons Arbeitsverm. will run at 35 strokes/min. approximately 29000 nm distance between the stands 1300 mm stroke adjustable 20-180 mm 150 mm largest tappet adjustment distance plunger table 750 mm table size 1250 x 1220 mm plunger surface 1200 x 1200 mm number of declines of 30- 70 / min. ... more
6
pressure: 650 t slide stroke: max. 520 mm stroke per minute: minimum = 25 Hübe / min dayligth: < 500 mm Msxn9w Table dimensions: 1000x900 mm clamping surface ram: 800x800 mm daylight between the columns: 800 mm height over floor: 6155 mm total height: 6655 mm total power requirement: 90 kW weight of the machine ca.: 45 t dimension machine [...]: 2,18x4,8x6,65 m Forging / Screw Friction Press - mech. forging Press (without ejector) [...] more
6
used in production: 1 x PMB KLH100 eccentric press roll feed immediately from stock 35398 Gießen available press: Year of construction: 1986 Force of pressure: 100 t Length of stroke: 50 mm stroke rate: 300 RPM E9mlkufh8 Stoesselmasse Lxw: 470 x 560 mm table Lxw: 880 x 580 mm Distance table / RAM: 335 mm Diarrhea hole in the table: Ø 330 mm Clearance between the stands: 460 mm roll feed: SMV presses type: MV 1200.500 Year of construction: 1991 Max sheet width: 500 mm with Siemens co... more
6
in 2009 was retrofit of SIEMENS S7, in 2014 was the Mandrille retrofitted, mit hydraulic overload system, can be inspected under power in Europa, available week 1 / 2018. Pressure 250 t Ejector in ram 20 t Ejector stroke 10 mm Ram stroke 70 / 250 mm Ram adjustment 160 mm Shut height (stroke down, adjustment up) 520 mm Distance between the columns F-B 1.300 mm Table surface area 1.600 x 1.600 mm Ram surface area 1.600 x 1.600 mm Hole in table 760 x 960 mm Number of strokes 0 - 50 min-1 Required ... more
6
-Pressing force 40 t -Stand through 290 mm -Table 600 x 400 mm -Table height above floor 835 mm -Plunger area 350 x 285 mm -Tappet adjustment range 65 mm -Largest hub installation height 280 mm -Throat depth 220 mm -Stroke range 10-80 mm -Stroke rates 40 / 95/min. -dimensions 1.32 x 1.35 x 2.6 m D8mqn8mje -Weight 3400 kg -refurbished in 2009, then no hours more, new 2-channel safety control, new Cabinet and new Mahani cam rear derailleur, new Herion/Nogreen has been renewed safety valve, new tw... more
1
pressure 40 t distance between columns 275 mm table-size 545 x 445 mm ram head dimension ca. 300 x 200 mm Mswhww throat 260 mm stroke adjustable from - to 8 - 80 mm dayligth ca. 280 mm weight of the machine ca. 1,5 t dimensions 1,2 x 0,8 x 2,1 m more
2

Eccentric press GRIMAR 125

Parets del Valles (Barcelona) Spain
6519 km
USED
GRIMAR Double side eccentric press. Force 125 Tn. Table dimensions 1210x825 mm. Strokes per minute, from 95 to 200. Fix stroke 40 mm. Spindle regulation 100 mm. Motorized spindle regulation. Max. light between table and saddle with press closed 400 mm. Motor 40 HP. Dimensions 2800x1300x4000 mm. Weight 17.000 Kg. Wui3ck0aw Equipped with: Electronic feeder LARA mod. AE/210 with touch screen for programming (width max. 210 mm and year 2007) and Winder, planner for sheet 180x2 mm. with speed regu... more
6
pressure: ca. 100 t distance between columns: 500 mm throat: bis Mitte Stößel / up to center ram: 350 mm dayligth: 450+100 mm min. ram stroke: 26 mm max. ram stroke: 152 mm ram adjustment: möglich/possible mm ram surface area: 550 x 400 mm clamping table: 1020 x 710 mm total power requirement: 10 kW weight of the machine ca.: ca.7 t space requirement approx.:: L:2,0 x B:1,7 x H:3,2 m WITHOUT drawing cushion can be demonstrated under power Lqzil [...] more
4
gebr. Double-walled eccentric press make KIESERLING Model PEBR 40. No.: 596490 year of 1970 1989 overhaul Pressure capacity 40 to Throat depth 250 mm Stand width 280 mm Plunger stroke 8-112 mm Tappet adjustment 65 mm Table size 630 x 450 mm Plunger area 450 x 250 mm Hole in the tappet 40 Ø x 75 mm Distance between Table and plunger, gr. Stroke down, 2dgq3ke2 Tappet adjustment above 280 mm Diarrhea hole in the table 225 mm Stroke 25 mm rejector Per minute of number... more


Eccentric ...
every day

New machines via email!

Be informed!
4
Capacity 800 t Number of strokes 14 min-1 Slide adjustment 500 mm Stroke 500 mm Shut height 1050 mm Table size 3150 x 1600 mm Ram size 3100 x 1600 mm Cushion in table 160 t Cushion stroke 200 mm Distance between columns 3160 mm Dimensions of press 6000 x 3000 x 8000 mm 9cdrli770 Main motor 90 kW Weight approx. 175 t more
2
Manufacturer: Calishaw Model Calishaw Walker 400 to double connecting rod eccentric press with expert turntable Year of build 1971 Control Table size 3960 x 600mm Number of strokes 16/min Cutting force 400 to Lifting height 254mm Clutch / brake pneumatic Suspension Dam9dgp7o 6 x Dimensions L W H 7,200 x 4.000 x 2145mm Weight 8550kg Drive 20KW Additional equipment Expert turntable Type No.: E49/0511/4 Ø = 3,000 mm Processing stations 4 pieces = 3 x insertion = 1 x... more
1
pressure 75 t distance between columns 625 / 300 mm stroke 8 - 100 mm table-size 620 x 620 mm ram surface 500 x 400 mm ram adjustment 60 mm no. of strokes 100 Hub/min tool hole in ram ø 38 mm total power requirement kW weight of the machine ca. 4,3 t dimensions 2,1 x 1,24 x 2,9 m Yoszudbvw more
3
SCHULER Double side eccentric press and double connecting rod. Type PZ ESS 200. Pneumatic clutch. Max power 200 Tn. Table 1170x1000 mm. Dimensions deck 820x720 mm. Stroke 35 mm. Opening 530 mm. Strokes per minute 0-270 s.p.m. Motor power 30 Kw. Equipped with: Zyxqvidl • CAMU Winder • Sheet feeder for 480 mm • DREHER planner for sheets of 300 x 4 mm • Normative CE more
6
pressure: 100 t slide stroke: 100 mm throat: 500 mm distance between table / ram: max.300 mm ram stroke-adjustment: 250 mm passage between the side columns: T:500xH:450 mm table:: 900x600 mm clamping plate: 900x600x80 mm passage opening in table: Ø 120 mm clamping surface ram: 550x250 mm dimensions electric cabinet LxWxH: 1,8x1,5x2,6 m total power requirement: 7,5 kW Es9tiyn weight of the machine ca.: 8,2 t dimension machine [...]: 1,8x1,5x2,6 + Schaltschrank m control via manual switch and foo... more
6
the machine was retrofitted in 1998 and in 2006 they have done a complete and general retrofitting Pressure 1100 t Ram Stroke 500 mm Ram adjustment 300 mm Table surface area 5200 x 2200 mm Ram surface area 5200 x 2200 mm Distance between the columns 5300 mm Shut height (S.D.A.U.) 1300 mm Number of strokes 13 - 40 s.p.m. Die weight max. 50 t Required power 235 kW Weight ca. 275 t KOHLER FEEDING LINE Coil weight 20 t Coil width 500 to 1800 mm Coil inner diameter 580 to 610 mm Coil exterior diam... more
3

Eccentric press SCHULER 125

Parets del Valles (Barcelona) Spain
6519 km
USED
EoghcgoiaSCHULER Double side eccentric press and double connecting rod. Capacity 125 Tn. Table 1320x1100 mm. Deck dimensions 1080x1000 mm. Opening 580 mm. Pneumatic clutch. Equipped with: • KOHLER double head winder • Feeder and planner for sheet of 520 x 4-5 mm. • Normative CE more
4
pressure: 45 t Ml8qvxft slide stroke: 8-96 mm stroke: 110 Hübe/min distance between columns: 230 mm throat: 230 mm Table dimensions: L:500xB:900 mm ram adjustment: 55 mm height over floor: 660 mm clamping plate on table: L:600xB:500xD:56 mm daylight dimension : table/slide up: 255 mm total power requirement: ca. 3,0 kW weight of the machine ca.: 2,5 t dimensions of machine: T:1,2xB:1,0xH:2,0 m space requirements of the machine approx.: 1,3x1,1x2,1 m single and continuous stroke possible at th... more
2
Cdo8riomFAGOR Double side eccentric press and double connecting rod. Type HR60/900. Pneumatic clutch. Capacity 60 Tn. Table 900x530 mm. Base of the cart dimensions 900 x 430 mm. Height between table and cart base 265 mm. Stroke 25 mm. Cart regulation 80 mm. Strokes 120-600 s.p.m. Power main motor 32 Kw. Weight 9300 kgs. Year 1989. Equipped with: • Winder LASA 10CMDF o Max coil weight 500 kgs. o Max coil width 150 mm o Internal coil Ø and max 350 - 525 mm. • Feeder LASA RDC6CFA o Max width coil... more
5
pressure: 125 t stroke: 28 mm number of strokes: 56-225 Hub / Min distance between columns: 1000 mm ram adjustment: 60 mm distance table/ram: 376 mm Table dimensions: B.950xT:720 mm 2pt9uwv39 passage opening in table: 400x130 mm height over floor: 1120 mm ram surface area: 920x540 mm mortise hole in ram: Dm 65 x 120 mm column travel -side: 250 mm total power requirement: 30 kW weight of the machine ca.: 15,5 t dimensions of machine: 3,1x1,34x3,6 m dimensions electric cabinet LxWxH: 0,64x0,22x1,... more
2
pressure: 60 t stroke: 80 mm slide stroke: 80 Hub/min throat: 280 mm adjustment of stroke: 16-140 mm ram adjustment: 80 mm X8clzhpys daylight dimension : table/slide up: 300 mm daylight dimension : table/slide low: 50 mm table height adjustable: min/max: 820/1020 mm Table dimensions: L:620xB:800 mm total power requirement: ca. 3,0 kW weight of the machine ca.: 3,4 t dimension machine [...]: 1,5x1,2x2,4 m type of strokes: single stroke equipped with foot pedal more
6
pressure: 100 t distance between columns: 1070 mm slide stroke: 50..150 mm dayligth: ca. 500 mm clamping table: 920x760 mm tool shank hole: 430x200 mm ram adjustment: [...] mm ram surface area: 910x760 mm number of T-slots: 5 Stück total power requirement: 12 kW weight of the machine ca.: 10 t space requirement approx.:: L 2,0 x B 1,5 x H 3,25 m Four column excentric press with feeder made by company Wanske Without drawing cushions Slide guiding: two point system distance between columns:1070 x ... more
6
pressure 125 t distance between columns 1290 mm stroke 18-150 mm table surface area 1250x630 mm hole in table 600x160 mm ram surface 1100x600 mm strokes - infinitely variable 45-80 Hub/min ram - range of adjustment 90 mm dayligth 400 mm total power requirement 15 kW Czik97qq weight of the machine ca. 15 t dimensions of the machine ca. 2700x1800x3200 mm more
6
Main specifications of the ZH 2500 / 1600 BJ. 1999 Nominal press force of 2,500 kN Basaktwmna Tappet adjustment 140 mm Piston stroke, adjustable 20... 200 mm Infinitely variable stroke rate 25... 75 / min Tool height Groessthub down and adjustment up 560 mm Table clamping surface (B x T) 1600 x 1,000 mm Plunger clamping area (B x T) 1400 x 1,000 mm lateral passage 850 mm Power of main motor 45 kW Height approx. 4,450 mm the machine Weight of the machine approx. 32 to Hydr. Overl... more
3
pressure:160 t distance between columns:1680 mm stroke:25 - 150 mm dayligth:600 mm table surface area:1500 x 900 mm ram surface:1500 x 900 mm Uwcjfxfbm ram adjustment:100 mm no. of strokes: Hub/min daylight between the columns:1500 mm daylight between the side columns:400 x 200 mm total power requirement: kW weight of the machine ca.:15 t dimensions of the machine ca.:2,7 x 1,8 x 4,4 m more
6
pressure 250 t ram surface 2000 x 1000 mm table-size 2000 x 1160 mm table pass 1100 x 350 mm dayligth 550 mm ram adjustment 110 mm ram stroke - adjustable min/max 30/180 mm number of strokes - stepless 20 - 100 pneumatically operated 5,5 bar roll feed device H - A2 - 780 band width 40 - 480 mm Band Thickness 6,0 mm Band Section 2000 mm² roll diameter 50 mm Band Thickness 7,0 mm band width max. 500 mm coil weight 6,00 t coil external diameter 1500 mm H3lbnnzx weight of the machine ca. 34,00 t ... more
3
pressure:0800 t distance between columns:1250 mm stroke:fix 400 mm no. of strokes:12 /min distance table/ram, max. stroke up, adjustment up:1030 mm table surface area:1000 x 1260 mm Hole in the table:850 x 850 mm side window: mm 88ggry2ri ram surface:1250 x 1670 mm ram adjustment:185 mm power requirement:55,0 kW weight: t Dimensions (WxDxH): m more
6
Pressa eccentrica ROSS e Pressa eccentrica Cattaneo Pressa eccentrica ROSS 40 ton corsa variabile Colpi/min: 140 M7lc7 Regolazione mazza: 60mm Luce mazza: 300 mm Anno: 1979 Pressa eccentrica Cattaneo Modello: Obi Ton: 75 ton cambio corsa Colpi/min: 45 Corsa slitta: 6:100 Distanza slitta/tavola: 341/388 mm Regolazione slitta: 75 Corsa cuscino: 90 mm Dimensioni piastra: 420/420 In vendita il prossimo 19/12 2017 alle ore 11:30 in Provincia di Mantova Per maggiori informazioni contattateci more
5
Double upright eccentric press Beutler ZA 100 BJ. 1980(bis Demontage gelaufen) Operating instructions available without a feed device Beutler control Completronic Technical data: Force of pressure: 1000 kN Maximum cutting area for 400 n / mm²: 2500 mm² Clearance between the rack front: 1000mm lateral passage in columns: 420mm table top, width x depth: 900x600mm 3ysvlkgo3 Tappet surface, width x depth: 980 x 420 mm Stroke length: 50-100 mm The maximum distance between table (witho... more
4
STEELTEC CZ offers for sale the ERFURT 315 .1 FS PKZZ press, currently in the fault of the spindle shaft, the press has a new complete electrique and monitoring of the instrument sensors.The press is on sale, with the Steeltec press being put into operation at the new workplace.The press is currently in Lakum, Frýdlant nad Ostravicí, where it is possible to organize a tour. Any questions to Mr. Troika (phone number xou see on the right side). Babeb9ul3f more
1
pressure:40 t stroke:8 - 50 mm no. of strokes:85 - 500 Hub/min table height over floor:980 mm distance between columns:680 mm table clamping surface LxW:620 x 450 mm ram - range of adjustment:50 mm number of T-slots:4 dayligth:250 mm ram surface: mm total power requirement:8 kW Tvdunx3gs dimensions of the machine ca.:2,3 x 2,2 x 2,8 m weight of the machine ca.:5,8 t more
1
80 - number. 400 / min. Hub 8-60mm Table 650 x 450 mm Force Max 55 to 3osc7kp more
4
BhwzpbvType 15200P 45 strokes per minute counterpressure in table more
6
Condition: good, working. Technical specification: Force: 200 ton Stroke: 350 mm Shutheight 457 mm 7qmrxx0xl Strokes per minute 30 Adjustment: 15 mm ​Slider: 700 x 760 mm Table: 870 x 810 mm Weight: 14,1 ton more
4
3r0nid2jiWorktable length: 1760 mm Bench width: 925 mm Ram: 1400x900 mm Transit height: 640 mm Extra: distance between RAM and table : 450 Z: 20-160 mm Press force: 320 ton more
6
Eccentric presses Make: Weingarten AG Gxtpn3800 Type: DQ 500.14.20 Capacity: 500 ton Table: 1.400 x 900 mm Max. Stroke: ± 300 mm Year of make: 1977 Stroke adjustment: 100 mm Throw-out cylinder: 50 mm Daylight: 700 mm Incl. decoiler Incl. straigthener With feeding attachement Stock Number: pers200 more
1
pressure:160 t distance between columns:950 mm stroke:8 - 160 mm number of strokes - idle run:42 min-1 Itfqjxd cutting surface:5500 mm² column travel -side:560 x 560 mm ram adjustment:125 mm table surface area:900 x 900 mm table height:800 mm clamping plate thickness:100 total power requirement:18,5 kW weight of the machine ca.:13,9 t dimensions of the machine ca.:2,415 x 2,17 x 4,03 m ram surface:900 x 710 mm clamping plate:900 x 900 mm day light (max. stroke down, ram adjustment on top) :56... more
1
Hersteller/Make: Umformtechnik Erfurt Typ/Type: PKZe 500 Baujahr/Year of Make: 1976 Maschinengewicht/weight of machine: ca. 43 t Presskraft/pressure: 500 Mp Gegenhalterkraft d. Kissens/counter support power of cushion: 80 Mp 7kktrp Auswerferkraft d. Kissens/ejector power of cushion: 40 Mp Leerlaufhubzahl/ No. of strokes: 12 / min Lichte Weite zw. Staendern/daylight between columns: 1000 mm Hub des Stoessels/stroke of ram: 400 mm Hub des Stoesselauswerfers: 180 mm Verstellung des St... more
4
Type GPM200 96 Yqnqkk 30 strokes per minute more
4
Force: 320 tons Table: 1.550x1.300mm Ram: 1.570x1.240mm Daylight: 540mm Windows: 800mm Ram adjustment: 150mm Bkwhltqy Stoke adjustment: 20-200mm Strokes per minute: 20-60 Requested power: 60 KW Weight: 45.000 kilos Height: 4.450mm Width: 3800mm Depth: 2.800mm more
6
Length machine: 3700 mm Machine width : 4000 mm Height machine: 3300 mm Worktable length: 1230 mm Bench width:820 mm Height worktable:1190 mm Between the columns:1180 mm Transit height:400 mm Machine weight:17 ton C079yevu Stroke:70 mm Press force:100 ton Number of strokes / min.:160-250 Volt: 380 V Hertz: 50 Hz more
2
Double column ex Center press FANR. SCHULER type PDR 200-450 with cross shaft Masch.# 10.7161 / 320632, built in 1972 Technical data: Max Stamzleistung 200 t Table size 1000 x 900 mm KL. / gr. Distance table / plunger 468 mm KL. / gr. Distance table / slide guide 740 mm Continuity betw. the stands 425 mm Tappet adjustment 125 mm Plunger area 710 x 450 mm 15 kW Weight 13.6 t with -Friction clutch with hub break, single disc brake B1S / 40 2 manual disengagement -Intermediate tabl... more
2
pressure:160 t ram surface:1440 x 950 mm number of strokes adjustable:30 - 180 min Tan03wwj8 distance between columns:1600 mm hole in the table:1300 x 350 mm ram adjustment:100 mm dayligth:700 mm daylight between the side columns:640 x 700 mm stroke of ram - solid:40 mm table-size:1600 x 640 mm total power requirement:30 kW weight of the machine ca.:25 t dimensions of the machine ca.:ca. 3 x 2,3 x 4 m - With hydraulic overload - With shuttle table device Machinewill be partly recondition (wit... more
3
Power in tons 630 T P0sdpluud Table length 1200 mm (47.2 in) Table width 1200 mm (47.2 in) Ram stroke 400 mm (15.7 in) Number of strokes per minute 16 Motor power 30 kW more
4
Jtswuitype 1013GP 55 strokes per min more
5
Force: 315mm Windows: 600mm Daylight: 478mm Table: 1500x1020mm Eqbe28t Ram: 1350x780mm Ram adjustment: 130mm Hole in table: 850x300mm Stroke adjustable: 20-220mm Strokes per minute: 20-45 Requested power: 22kW Weight: 25 tonsHeight: 4200mm Reconditioned with new electric 2005 Roll feeder PME new in 2006, Servo 600mm, material 600x5mm Hydraulich overloadprotection Semi automatic stroke adjustmment Pneumatic clutch more
4
Nominal Power 300 tons Dimension table 1600 x 1100 mm Stroke par minute/variable speed 25 - 75 Stroke 300 mm Motor Power 87 CV 8r8yunpx0 MODEL 2 PR 300 more
5
Manufacturer: SCHULER Model: ES2 400 T Year of manufacture: 1984 Condition: Very good Press Capacity: 400 Tons Rated Tonnage Point: 12.5 mm Die Height : 1018 mm Slide Adjustment: 305 mm Slide Stroke: 610 mm Dhw3bmsa Bolster Size: 2743 x 1524 mm Slide Size: 2743 x 1524 mm SPM: 20 Die Cushion Capacity: 70 Tons x 2 pcs. Die Cushion Stroke: 203 mm Main Motor Capacity: 60 KW Moving Bolster: Front Exit more
5
pressure:200 t 9wvnw3i7k table:: mm stroke:20 / 130 mm strokes per minute:32 - 56 pro min ram surface:630 x 550 mm ram adjustment:110 mm clamping slots:800 x 960 mm total power requirement:15 kW weight of the machine ca.:16,8 t dimensions of the machine ca.:2950 x 1700 x 3150 mm more
1
Pressure: 160T Length of stroke: 30 - 180 mm Down table size: 800x900 mm Back pressure: WITH BACK PRESSURE Technical characteristics: WITH AIR CLUTCH Bhf2uls New electric system more


Eccentric ...
every day

New machines via email!

Be informed!

to

to

Change search

SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close