Used eccentric presses double column for sale (40)

Year of construction: 1986, condition: used, pressure 40 t dayligth 250 mm stroke 8 - 50 mm table clamping surface LxW 620 x 450 mm table height over floor 980 mm no. of strokes 85 - 500 Hub/min distance between columns 680 mm ram - range of adjustment 50 mm number of T-slots 4 Hnjdpfecb T Twjx Ahyeg ram surface mm total power requirement 8 kW dimensions of the machine ca. 2,3 x 2,2 x 2,8 m weight of the machine ca. 5,8 t - Unidor Tool monitoring - Kaiser gripper feed, band width 180 mm, feed length 150 mm - Kaiser scrap shear on the left side - soundproof cladding

Condition: reconditioned (used), Year of construction: 2002, Pressure 100 ton Clear width between the two uprights: 420 mm Ram dimensions: 610 x 410 mm Table dimensions: 950 x 650 mm Installation height, ram bottom position: 400 mm Adjustable ram stroke: 0–140 mm Ram adjustment: 90 mm Strokes per minute: 55 Hodpfsx Adp Ejx Ahyong Clamping pin: D 50 H7 Motor power: 7.5 kW Dimensions: H 3050 x W 1030 x D 1905 mm Weight: 7000 kg Press is equipped with: - Air clutch - Hydraulic overload protection - Central lubrication system - Bronze guide strip

Condition: used, Year of construction: 1971, pressure 100 t Hnedpfx Ajxuv Htohyjg distance between columns 400 mm stroke 20 - 140 mm table surface area 900 x 710 mm ram surface 560 x 450 mm ram adjustment 80 mm dayligth 470 mm no. of strokes 70 Hub/min total power requirement 10,5 kW weight of the machine ca. 9 t dimensions of machine L x W x H 1,98 x 1,60 x 3,10 m

Condition: used, Year of construction: 1964, Technical details: pressure: 125 t stroke: 28 mm number of strokes: 56-225 Hub / Min distance between columns: 1000 mm ram adjustment: 60 mm distance table/ram: 376 mm Table dimensions: B.950xT:720 mm passage opening in table: 400x130 mm height over floor: 1120 mm ram surface area: 920x540 mm mortise hole in ram: Dm 65 x 120 mm column travel -side: 250 mm Hnedsu Nfibopfx Ahyog total power requirement: 30 kW weight of the machine ca.: 15,5 t dimensions of machine: 3,1x1,34x3,6 m dimensions electric cabinet LxWxH: 0,64x0,22x1,2 m This press is a high-performance press for mass production /series production. - Contains left side a material feed via automatic feed (mechanic) and right side a waste cutter. Feed = 0-200mm, roll width =250mm Partial documentation as a copy available. Machine is not functional and is on sale as is! *

Condition: excellent (used), Year of construction: 2003, Manufacturer: ROVETTA Year: 2003 Condition: Used Stock number: 0385 Pressing force: 630 tons Number of connecting rods: 4 Slide stroke: 300 mm Slide adjustment: 250 mm Die clearance at BDC: 950 mm Hjdpfx Ahoxlh Rfeysng Strokes per minute: 15/65 Maximum front opening: 5,200 mm Table dimensions: 5,000 x 2,630 mm Slide dimensions: 5,000 x 2,630 mm Main motor power: 132 kW

Condition: ready for operation (used), Year of construction: 1969, functionality: fully functional, machine/vehicle number: 70-10 6840, table width: 2,750 mm, table length: 1,500 mm, pressing force: 500 t, distance table to ram: 1,000 mm, stroke length: 850 mm, Refurbished eccentric press including robot and mold carriage TECHNICAL DETAILS Press force: 500 t Stroke: 850 mm Stroke rate: 12 - 24 rpm Adjustability: 325 mm Stand spacing: 3250 mm Table area: 2750 x 1500 mm Ram area: 2750 x 1500 mm Distance between table and ram: 1000 mm Hnodpfjwcn H Rex Ahyjg Compressed air pulling device in the table Force at 6 atm: 140 t Stroke: 250 mm Ejector in the ram Force at 6 atm: 46 t Stroke: 150 mm

Condition: new, Year of construction: 2024, functionality: fully functional, installation height: 400 mm, table width: 1,000 mm, table length: 830 mm, pressing force: 135 t, EXNER New Double column press - Eccentric press DEXRH 135/1000/1 Year of construction 2024 Nominal pressure capacity 1,350 kN Dimensions Clamping plate width depth 1,000 x 830 mm mm T-slot clamping plate 22 mm Column width 1,050 mm Ram size Width Depth 1,020 x 740 mm T-slot ram 22 mm Centering groove ram width 30 mm depth 15 mm mm Hsdpfx Ahoup Sqkeysng Ram adjustment max.100 mm Stroke rate with infinitely variable drive from 30 1/min to 100 1/min. Stroke adjustment from 20 mm to 140 mm

Year of construction: 1983, condition: used, Force: 75 tons Table: 630x620mm Ram: 500x450mm Ram adjustment: 80mm Daylight: 370mm Windows: 300mm Hnedectl Dtopfx Ahyog Stroke: 08-100mm Strokes/Minute: 07-160 Requested power: 11KW Weight: 7 tons Height: 3050mm SIRI electronic servo roll feeder Hydraulic overload protection Hydraulic Ortlinghaus clutch

Condition: new, Year of construction: 2025, table width: 400 mm, table length: 4,500 mm, pressing force: 400 t, stroke adjustment: 100 mm, warranty duration: 24 months, stroke length: 60 mm, Equipment: safety light barrier, Our presses and feeding lines, developed for the door and window accessories industry, feature both double and single operation, and are designed to provide maximum efficiency and reliable long-term operation. In the window accessories sector, where high-volume production is essential, our presses, combined with our expertise, ensure maximum customer satisfaction. - Press force up to 400 tons - Table length up to 6000 mm - 2 and 3 connecting rod options - Automatic continuous fine lubrication with return - Progressive lubrication block - Accessible from both front and rear sides - Magnetic sensor sliding covers - Induction-hardened and ground gears - Gear-hub connections via conical locking PRESSURE: 400 TON SPEED: 40-70 RPM STROKE: 60 MM MAXIMUM DIE HEIGHT: 340MM TABLE-RAM HEIGHT: 400MM STROKE ADJUSTMENT: 100MM UPPER TABLE DIMENSIONS: 500X4500MM Hjdpoxrbpnsfx Ahyeng LOWER TABLE DIMENSIONS: 400X4500MM MOTOR: 30 KW MOTOR SPEED: 3000 RPM

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: 0540/98, Manufacturing number: 0540/98. Year of manufacture: 1998 ,. Capacity: 400 tons. Stroke length: 300 mm. Stroke: 10-40 / min. Slide adjustment 300 mm. Installation height: 700 mm. The table measures 1600 x 1300 mm Hodpfxeicbbzs Ahyeng Net weight: 45 tons. Gable opening: 1600 mm. Exterior dimensions 2 x 3 x 6 meters. Control system MEAB. Coil feeder / straightener iRON RNE 50B / 11. Decoiler iRON SA6000 max 700 mm.

Condition: excellent (used), Manufacturer: ROVETTA Model: S4-600 Year: 2002 Condition: Used Stock number: 0363-0364-0365-0366 Pressing force: 800 tons Number of connecting rods: 4 Drive mechanism: LINK DRIVE Ram stroke: 900 mm Ram adjustment: 500 mm Ram dimensions: 4,500 x 2,300 mm Table dimensions: 4,500 x 2,300 mm Lateral opening in frame: 2,450 mm Usable front passage: 4,500 mm Die space at BDC: max. 1,500 mm, min. 1,000 mm Hodpfx Aew Hci Ishyong Hydraulic safety device: Present Side removable carriage: Present

Condition: refurbished (used), ECCENTRIC PRESS SGP TYPE : PEZZ 500/1700/1000 PRESSURE : 500t Hnodpfohqqnzsx Ahyjg DOWN TABLE DIMENSIONS: 1700x1000mm LENGTH OF STROKE: 20-153mm DISTANCE BETWEEN RAM -TABLE: Min 700mm , Max 800mm WEIGHT: 40.000 kgr MADE IN AUSTRIA

Condition: new, Year of construction: 2026, table width: 400 mm, table length: 4,200 mm, pressing force: 300 t, stroke adjustment: 100 mm, warranty duration: 24 months, stroke length: 60 mm, Equipment: safety light barrier, Our presses and feeding lines, designed for the door and window accessories industry and featuring both dual and single operation modes, guarantee maximum efficiency and reliable operation for many years. In the window accessories sector, where high-volume production is essential, our presses—combined with our extensive experience—ensure maximum customer satisfaction. - Pressing force up to 400 tons Hnedsxrbn Rspfx Ahyjg - Table length up to 6000 mm - Choice of 2 or 3 connecting rods - Automatic, continuous fine lubrication with return - Use of progressive lubrication block - Accessible from both rear and front - Sliding covers with magnetic sensors - Induction-hardened and ground gears - Gear-hub connections using tapered lock system PRESSURE: 300 TON SPEED: 40-70 RPM STROKE: 60 MM MAXIMUM DIE HEIGHT: 340 MM TABLE-RAM HEIGHT: 400 MM ADJUSTMENT: 100 MM UPPER TABLE SIZE: 400x3000 MM LOWER TABLE SIZE: 400x4200 MM MOTOR: 22 KW MOTOR SPEED: 3000 RPM

Condition: used, Pressure: 160T Length of stroke: 30 - 180 mm Down table size: 800x900 mm Back pressure: WITH BACK PRESSURE Technical characteristics: WITH AIR CLUTCH New electric system Hnjdpfxs Dviwe Ahysg

Condition: new, Year of construction: 2026, table width: 400 mm, table length: 4,200 mm, pressing force: 200 t, stroke adjustment: 60 mm, warranty duration: 24 months, stroke length: 60 mm, Equipment: safety light barrier, These presses and feeding lines, engineered for the door and window accessories sector and offered with both single and double operation capability, guarantee long-term, high-efficiency performance. In the window accessories industry—where high-volume production is essential—our presses, combined with our expertise, ensure maximum customer satisfaction. - Pressing force up to 400 tons - Table length up to 6000 mm - 2- or 3-connecting rod options - Automatic, constant fine lubrication with continuous return - Progressive lubrication block use - Front and rear press access - Sliding covers with magnetic sensors - Induction-hardened and ground gears - Gear-hub connections with conical locking PRESS: 200 TON STROKES: 40-70 RPM STROKE LENGTH: 60 MM Hnodoxrbmyepfx Ahyeg MAXIMUM DIE HEIGHT: 340MM TABLE-RAM HEIGHT: 400MM ADJUSTMENT RANGE: 100MM TOP TABLE DIMENSIONS: 400X3000MM BOTTOM TABLE DIMENSIONS: 400X4200MM MOTOR: 18.5 KW MOTOR SPEED: 3000 RPM