Used Double Belt Press for sale (29,247)

Year of construction: 2025, condition: new, functionality: fully functional, With stainless steel square tube frame 15 pressing rollers 2 press nipps Electrical powerd with stepless speed regulation Belt width 1500mm Itedpoclt Sbsfx Ab Toc High pressure belt cleaning integrated Nominal capacity up to 15.000 kg/h (depending on fruits & operating condition)

Condition: used, Year of construction: 1992, pressure 80 t stroke 40 mm Ijdpewz Rv Ejfx Ab Tjtc no. of strokes 60-300 Hub/min table surface area 730x750 mm weight of the machine ca. 14 t

Condition: used, Year of construction: 1979, pressure 60 t Ijdpfx Ajylcl Sob Totc distance between columns 650 mm stroke 220 mm distance table/ram, max. stroke up, adjustment up 410 mm table surface area 600 x 525 mm hole in the table 110 mm table height over floor 900 mm side window 200 mm ram surface 560 x 490 mm power requirement 15,0 kW dimensions (WxDxH) 1,9 x 1,3 x 2,7 m SPECIAL DEAL as is where is, WITHOUT putting into operation / WITHOUT additional work as spare part dispenser, free loaded to truck

Condition: used, Year of construction: 1982, pressure 30 t stroke 8 - 40 mm no. of strokes 100 - 600 /min distance between columns 330 mm dayligth (stroke and adjustment up) 280 mm Itodpfx Aoylck Iob Tjc column travel -side 300 mm table surface area 540 x 470 mm hole in the table 315 x 110 mm table height over floor 1000 mm ram surface 250 mm material width 120 mm material thickness - 3,0 mm feed length - 60 mm power requirement 5,5 kW Weight 2,6 t dimensions of the machine ca. 1,5 x 1,2 x 2,2 mxmxm SPECIAL DEAL as is where is, WITHOUT putting into operation / WITHOUT additional work as spare part dispenser, free loaded to truck

Condition: used, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine No. 5509 Year of manufacture: 1971 Pressing force: 50 tons Column span: 550 mm Column clearance (side): 150 mm Table size: 480 x 380 mm T-slot width in machine table: 18 mm Table opening: Ø 70 mm Ram area: 490 x 280 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 150 mm Max. installation height: 390 mm Table height above floor: 890 mm Rapid approach speed: approx. 130 mm/sec Working speed: approx. 20 mm/sec Return speed: approx. 130 mm/sec Motor power: 4 kW Power supply: 380 Volt, 50 Hz - Stepless pressing force adjustment - Rapid and working stroke - Pressure or stroke-dependent stroke limitation - Adjustable pressure holding time, press time extension 0.5–6 s - Mechanically adjustable hard stop via handwheel on ram - SICK light barrier, Type LVU - Stroke counter - Double column guide on ram Ijdpfxjv Srfwj Ab Tetc Space requirement (L x W x H): 1100 mm x 1050 mm x 2320 mm Weight: approx. 1.5 tons Good condition

Condition: excellent (used), For sale: a robust, double-station bookbinding/printing press from the renowned German manufacturer Karl Tränklein K.G., Maschinenfabrik Stuttgart – Schönaich. This machine was previously operated by the public sector unit Stadt Fürth (Germany), which ensures it is complete and well-maintained. The device is equipped with two independent workstations, a heavy-duty upper beam, and pressure adjustment via lever arms. The lower housing contains the mechanical and electrical systems; power is supplied through a 16A CEE connector (400V). The machine is mounted on wheels for easy mobility. Application This press is suitable for bookbinding, printing, modeling, technical works, and any applications requiring even pressure over a larger area. Ideal for book blocks, covers, laminates, paper and cardboard elements, and other materials that require pressing or stabilization under pressure. Technical condition – Complete unit – All levers and mechanisms function correctly Ijdsxzu Rqspfx Ab Totc – 400V power supply, CEE 16A plug – Mobile design on wheels – Normal signs of use visible in photos – Machine is ready for operation Manufacturer: Karl Tränklein K.G. Country of manufacture: Germany (Made in Germany)

Condition: used, Double-column Eccentric Punching Press BLEMA Gotha Type PEZ 160-50 MHSY-ES Eccentric press with ALBA roller feeder Machine No. 88151005 Year of manufacture 1988 / 92 Press force 160 tons Column width 970 mm Column width (lateral) 560 mm Table size 900 x 900 mm Ram surface 900 x 700 mm Tool installation height 560 mm, max. 700 mm Stroke adjustment 8-160 mm Ram adjustment travel 125 mm Stroke rate 25 to 70 strokes/minute Strip width in roller feeder max. 400 mm Motor power approx. 15 kW Power supply 380 Volt, 50 Hz - Infinitely variable stroke rate via frequency control - Semi-automatic stroke adjustment - Ram weight balancing cylinder with compressed air - Hydraulic overload protection in the ram - Pneumatic clutch-brake combination - Centralized oil lubrication - Precisely guided press ram with oil-lubricated guides - UNIDOR press control - Swiveling control panel - Switch cabinets for the press and feeder, jointly mounted on a platform next to the machine Platform dimensions: 3400 x 2250 mm, height without feet 2950 mm Press width without feeder 2100 mm Press depth with drive motor 2300 mm Overall press height 4150 mm Net weight of punching press approx. 18 tons For transport, the drive motor is disassembled and the machine is laid on its side. Included: NC Roller Feeder-Straightener ALBA Type GGVHY400 Equipment No. 1405 and 1406, Order No. 910708 (year 1992) - Feeder control ALBA PSS 300 - Feed length infinitely programmable from 0.1 to 6500 mm per stroke - Strip thickness at 400 mm width max. 3 mm - Strip thickness at 300 mm width max. 4 mm - Strip cross-section max. 1200 mm² - Roller drive of the feeder hydraulically controlled - Height-adjustable feeder unit at the press for material entry height adaptation - Hydraulic unit positioned next to the line - Straightening unit with hydraulic opening and closing Weight of the complete system approx. 24 tons Transport space required: one megatrailer with 3-meter internal height and 13.6-meter loading length Good condition Ijdpsdzqlvefx Ab Tjtc

Condition: used, Hydraulic Double-Column Press Double-Column Hydraulic Press SCHÖN Type TES 25 Machine No. 1847 Year of manufacture: 1977 – Retrofit in 2019 Fully overhauled by Schön in Hattingen in 2019 – Excellent condition Press force: 25 tons Column gap: 500 mm Side clearance between columns: 120 mm Table size: 440 x 320 mm Table opening: Ø 50 mm Ram surface: Ø 140 mm Clamping pin: Ø 40 mm Max. ram stroke: 100 mm Max. installation height: 330 mm Table height above floor: 910 mm Motor output: 4 kW Electrical connection: 400 V, 50 Hz - Complete hydraulic system replaced during 2019 overhaul - Entire electrical control system (contactor-based) renewed in 2019 to new machine standard - Stroke release via two-hand control, electric foot switch, or light curtain - Operating modes: setup, single stroke two-hand, single stroke via foot switch, control via light curtain - SICK light curtain, Type C 4000 with single- and dual-cycle, and safety function - Rapid approach and working stroke - Pressure- or stroke-dependent stroke limitation - Mechanically adjustable fixed stop - Manual press force regulation via knurled knob - Press dwell time extension: 0.5–3 sec. (pressure holding time) Itedpfx Abjyg Rfpe Toc - Stroke counter - UVV safety inspection in accordance with BGR 500 (for manual loading) performed in 08/2019 - Full documentation available (user manual, hydraulic diagram, circuit diagram) Required floor space (L x W x H): 1100 mm x 1050 mm x 2100 mm Weight: 900 kg Very good condition

Condition: used, Technical details: pressure: 20 t slide stroke: 6 - 60 mm throat: 176 mm ram adjustment: 55 mm no. of strokes: 155 Hub/min distance table/ram: 270 mm passage width: 470 mm Table dimensions: 300 x 450 mm passage opening in table: 90 mm surface area of ram: 130 x 248 mm inclination: 28 ° mortise hole in ram: 25 x 65 mm table height over floor: 775 mm air pressure - required: 5,5 - 6 bar total power requirement: 3,5 kW weight of the machine ca.: 1,0 t Itsdpfeu Nflijx Ab Tjc dimension machine xH: 1,3 x 1,1 x 1,95 m High performance press Central lubrication with light barrier (monitored) Linuflex stroke counter (counter) additional steel plate 315 x 400 x 50mm with center hole Ø 63mm *

Condition: used, Year of construction: 2000, ram adjustment: 120 mm, table width: 840 mm, table length: 1,500 mm, pressing force: 260 t, compressed air connection: 9.807 bar, stroke length: 250 mm, air pressure: 9.807 bar, We are offering this used Chin Fong OCP-260N eccentric press with double column, year of construction 2000. Model: OCP-260N Factory number: A00373 Itjdpfx Aboykbcms Tec Year of construction: 2000-11 Capacity: 260 tons Stroke frequency: 20–40 strokes/min Stroke: 250 mm Maximum die height: 500 mm Upper bolster clearance: 7 mm Slide adjustment (range): 120 mm Upper platen surface (L × W): 1130 × 700 mm Lower platen surface (L × W): 1500 × 840 mm Main motor power: 22 kW Poles: 4 Machine weight: 31.8 tons Compressed air pressure: 9.807 bar Oil temperature max.: +100 °C Oil temperature min.: -10 °C Oil volume: 180 liters If you have any questions or need more information, please feel free to send us a message or call us.

Condition: good (used), Double bench grinder, double grinding machine, pedestal grinder, bench grinder, belt grinder, belt sander, edge grinder, edge grinding machine Ijdpfx Aoydi A Ieb Tetc -Belt sander: Manufacturer Grit, sanding belt 75 x 2000 mm -Motor: Teknodan 3 kW 2850 rpm -Grinding bench: Manufacturer Flott, double grinding bench type 702 1 /2/200 x 32 x 51 -Grinding discs: Ø 200 mm -Motor: AEG 0.6 kW 2800 rpm -Submission/Price: complete -Overall dimensions: 1000/900/H1685 mm -Total weight: 228 kg

Condition: new, Year of construction: 2019, machine/vehicle number: DF0303, pressure:160 t distance between columns:700 mm stroke:400 mm Return Capacity:16 t Engine Output:15 kW Travel:400 mm :600 mm Ram plate:700 x 600 mm table height over floor:850 mm Table size:700 x 600 mm speed of forward flow:10 mm/sec Pressing speed:10 mm/sec :10 mm/sec Oil cooling (electric):1,5 kW (max) Oil Tank Capacity:300 l weight of the machine ca.:4,2 t dimensions:950 x 2440 x 2400 m ejector:30 x 30 mm ejector stroke:150 mm pressure of ejector:15 t ejector speed:25 mm/sec no. of ejector pins:1 Stück Iodpfefxyh Rox Ab Tetc heating plates :550 x 500 mm :6800 ? :2400 ? :1200 ? :1200 ?

Condition: used, Year of construction: 1992, pressure 32 t stroke 8 - 50 mm Isdpfxeyfwv Eo Ab Tetc no. of strokes 50 - 300 /min distance between columns 420 mm dayligth (stroke and adjustment up) 300 mm table surface area 420 x 500 mm ram adjustment 50 mm power requirement 11,5 kW Weight 5,0 t SPECIAL DEAL as is where is, WITHOUT putting into operation free loaded to truck

Condition: good (used), Year of construction: 1982, Press force: max. 200 kN Itsdpfxoydlute Ab Tec Safety distance: 100mm Post-travel: max. 10 mm Motor power: 3 kW

Year of construction: 2026, condition: new, functionality: fully functional, Belt press POWERPRESS 300 is designed for pressing fruit, berry and vegetable mash. Fruit mash is supplied on the belt which presses it against shafts. The obtained juice flows into a small collection tank under the press with filtration sieve on top. Then the external pump or juice collection tank with pump transfers the juice from the press to a desired storage tank or straight to ROCKET pasteurizer for further processing. The pressing process is continuous. Capacity: 300 kg/h The most cost-efficient belt press in the market! The most evolutionary feature of our Belt press POWERPRESS 300 is one huge pressing shaft, which lets the machine to maintain the longer pressing time (belt length is 4900 mm) and huge shaft dimensions squeezes the juice efficiently by saving the costs and space. The juice yield of apples using our belt press is ~65-75 %. The yield highly depends on freshness and variety of fruits. There is a filtration sieve integrated into the juice collection tank. Because of that the belt press 300 filtrates the juice even during the pressing stage providing cleaner and purer product. The belt press includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves service costs. Adjustable fruit inlet lever lets fruit mash supply onto the shaft easily. Crushed fruit mash can be supplied from MAXIMILL or straight from a bucket or basket. After work, belt press should be manually washed with a water stream. A full washing process takes around 15 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. Itsdjt Rft Uepfx Ab Tjc Belt tension is adjustable. The machine is made entirely of stainless steel and has adjustable feet. Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble.

Year of construction: 2026, condition: new, The obtained juice flows into integrated collection tank under the press. Then the pump transfers the juice from the press to a desired tank for further processing. The pressing process is continuous. Iodpsq Nl Aqofx Ab Tstc Capacity: 3000 kg/h. The most evolutionary feature of our Belt press POWERPRESS line is that belt presses come with integrated pump and juice collection tank. This means you save money and do not need additional juice collection tank and pump which otherwise would use much space and cause additional costs. -The juice yield of apples using our belt press 3000 is ~75 %. -There is a filtration sieve integrated into the juice collection tank. It filtrates the juice providing clearer and purer product. -The belt presses work automatically: when the mash inlet tank is full, all other machines, which come before belt press, turn off automatically. When the juice tank is full, the pump automatically pumps the juice into the tanks. -The belt press 3000 includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves the service costs. -Pneumatic lifting of the security cover of the press ensures easier access when cleaning. -After work, belt press should be manually washed with a water stream. A full washing process takes around 15-20 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. -Belt tension is adjustable. -Machine is made entirely of stainless steel and has adjustable feet for more convenient use. -Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble.

Year of construction: 2026, condition: new, Belt presses POWERPRESS 800 are designed for pressing fruit, berry and vegetable mass. Fruit mass is placed on the belt which presses it against cylinders.The obtained juice flows in the collection trays under the belt presses. Pressing is continuous. Capacity: 800 kg/h Iedpfx Abehu Ab Do Tstc The most evolutionary feature of our belt press POWERPRESS line is integrated pump and juice collection tank into the press itself. That means that you save money and do not need an additional juice collection tank and pump which otherwise would use much space and money. There is a filtration sieve integrated into the juice collection tank. Because of that the machine filtrates the juice even during the pressing stage providing cleaner and more pure product. Entirely made of stainless steel. Has adjustable feet. The belt presses function automatically. When the tank of the mass is full, all other machines which come before belt press turn off automatically. When the juice tank is full, juice pump pumps the juice into the tanks. Includes High pressure washer. Has an integrated pump. Belt tension is adjustable. Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble. The cleaning of the belt is automatic with high pressure cleaner, scraper and brush. Pneumatic lifting of the security cover of the press ensures easier access when cleaning.

Year of construction: 2026, condition: new, The obtained juice flows into integrated collection tank under the press. Then the pump transfers the juice from the press to a desired tank for further processing. The pressing process is continuous. Capacity: 1500 kg/h. Isdpfoflpp Esx Ab Tjtc - The most evolutionary feature of our Belt press POWERPRESS line is that belt presses come with integrated pump and juice collection tank. This means you save money and do not need additional juice collection tank and pump which otherwise would use much space and cause additional costs. - The juice yield of apples using our belt press 1500 is ~75 %. - There is a filtration sieve integrated into the juice collection tank. It filtrates the juice providing clearer and purer product. - The belt presses work automatically: when the mash inlet tank is full, all other machines, which come before belt press, turn off automatically. When the juice tank is full, the pump automatically pumps the juice into the tanks. - The belt press 1500 includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves the service costs. - Pneumatic lifting of the security cover of the press ensures easier access when cleaning. - After work, belt press should be manually washed with a water stream. - A full washing process takes around 15-20 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. - Belt tension is adjustable. - Machine is made entirely of stainless steel and has adjustable feet. - Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble.

Year of construction: 2026, condition: new, The obtained juice flows into integrated collection tank under the press. Then the pump transfers the juice from the press to a desired tank for further processing. The pressing process is continuous. Capacity: 1200 kg/h The most evolutionary feature of our Belt press POWERPRESS line is that belt presses come with integrated pump and juice collection tank. This means you save money and do not need additional juice collection tank and pump which otherwise would use much space and cause additional costs. The juice yield of apples using our machine is ~75 %. There is a filtration sieve integrated into the juice collection tank. It filtrates the juice providing clearer and purer product. Machine works automatically: when the mash inlet tank is full, all other machines, which come before belt press, turn off automatically. When the juice tank is full, the pump automatically pumps the juice into the tanks. The belt press includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves the service costs. Pneumatic lifting of the security cover of the press ensures easier access when cleaning. After work, belt press should be manually washed with a water stream. A full washing process takes around 15-20 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. Itodsflpplopfx Ab Tjc Belt tension is adjustable. Machine is made entirely of stainless steel and has adjustable feet. The washing is simple, and all machinery parts are easily removable. Interested in belt press only with different efficiency? Check out our other belt presses: POWERPRESS 400, POWERPRESS 800, POWERPRESS 1500.

Year of construction: 2026, condition: new, The obtained juice flows into integrated collection tank under the press. Then the pump transfers the juice from the press to a desired tank for further processing. The pressing process is continuous Capacity: 400 kg/h The most evolutionary feature of our Belt press POWERPRESS line is that belt presses come with integrated pump and juice collection tank. This means you save money and do not need additional juice collection tank and pump which otherwise would use much space and cause additional costs. Iedpfeflpnyex Ab Tstc The juice yield of apples using our belt press is ~75 %. There is a filtration sieve integrated into the juice collection tank. Because of that the belt press 400 filtrates the juice even during the pressing stage providing cleaner and more pure product. The belt presses work automatically: when the mash inlet tank is full, all other machines, which come before belt press, turn off automatically. When the juice tank is full, the pump automatically pumps the juice into the tanks. The belt press includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves the service costs. After work, belt press should be manually washed with a water stream. A full washing process takes around 15-20 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. Belt tension is adjustable. Machine is made entirely of stainless steel and has adjustable feet. Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble. Interested in belt press only with different efficiency? Check out our other belt presses: POWERPRESS 800, POWERPRESS 1200, POWERPRESS 1500.

Year of construction: 1994, condition: ready for operation (used), Pressing force: 3150kN, table dimensions X/Y: 2500mm/1600mm, stroke (fixed): 280mm, stroke rate: 20-80strokes/min, weight: approx. 68000kg. Including Dreher transfer and feed line. The control system is defective. Documentation available. An on-site inspection is possible. Itedpextff Asfx Ab Toc

Condition: ready for operation (used), Two mechanical large-format double-column eccentric punching presses Rhodes (UK) are available. Press force: 350t, table dimensions X/Y: 1750mm/920mm, ram dimensions X/Y: 1550mm/615mm, ram stroke: 101mm, ram adjustment: 100mm, stroke rate: 50 strokes/min, max. installation height: 483mm, side opening X/Y: 630mm/380mm, table height: 933mm, weight: approx. 43000kg. Documentation available. On-site inspection is possible. Itedpfoyfv I Tjx Ab Toc

Year of construction: 1992, condition: ready for operation (used), Max. ram force: 1600kN, length: 3170mm, width: 2500mm, height: 5080mm, weight: 23t, with documentation. Isdpfxjlc N Ryj Ab Tstc

Year of construction: 1991, condition: ready for operation (used), Pressing force: 3200kN, stroke: 700mm, table dimensions: 2500x1300mm, weight: 63t, with documentation. Itedslc N R Depfx Ab Tjc

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm Itodpshlnzkofx Ab Toc table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.