Used Double End Miter Saw for sale (22,038)

Condition: ready for operation (used), functionality: fully functional, 6226 - OMS INVINCIBILE OK 330 DOUBLE MITER SAW Lsdpjy N Rg Tjfx Akqshn Motor power: 1.8 kW Manual movement of the units Blade diameter: 330 mm 3000 RPM Maximum distance between units: 3500 mm Cutting angle adjustment: -45°/+45° Vertical and horizontal pneumatic clamps Cutting process started by two buttons Safety switch Width: 900 mm, Height: 1500 mm Year: 2003

Condition: used, Technical details: saw blade diameter: 420 mm Lhjdou Nigwopfx Akqen cutting lenght max.: 5000 mm cutting range: H x B: 180 x 100 mm air pressure - required: 6 bar mitter cutting - both sides: 45° - 90° (manuell) ° voltage: 380 / 220 V total power requirement: ca. 8,0 kW weight of the machine ca.: auf Anfrage t dimension machine xH: 6,4 x 1,3 x 2,0 m Circular saw with 2x sawhorses for cutting profiles with inclined cuts up to 45°. microprocessor positioning control BECKHOFF E 70-300 with absolute encoder, digital display travel per saw block = 2350mm, motorized Clamping cylinder for each horizontal and vertical, manual flushing device hydropneumatic feed use of carbide saw blades i.D. *

Condition: used, Year of construction: 1994, Technical details: saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. Ljdpfx Aeu Nigkekqohn *

Condition: excellent (used), CATALOGUE NUMBER 7065 TECHNICAL DATA - max. blade diameter 300mm - spindle diameter 30mm - 2 blade guards - pneumatic cutting (blade movement up/down) - sawing units adjustable at a 45° angle - manual adjustment of the sawing unit spacing - min. cutting length at 90° 220mm - max. cutting length at 90° 2820mm - cutting width 110mm - cutting height at 90 degrees 90mm - 2 pneumatic clamping devices Lhsdpfx Aezulu Tjkqjn - control pedal - material support - main motor 2 × 1.6kW - dimensions (L/W/H) 3620x1100x1250mm - weight approximately 500kg - unpainted - tilting sawing units - used saw, very good condition Net price: 13900 PLN Net price: 3233 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: new, Year of construction: 2024, machine/vehicle number: MR005970, Perfect cutting 200mm high! In double miter and with a fixed zero point. When the machine is mitered, the saw blade continues to enter the material at the same point. Technical specifications: - Fixed zero point: Yes Ljdpfx Akjvzl Scjqohn - Miter angle: 45-90-25 ° - Tiltable: Yes - Tilt angle: 60-90-30 ° - Maximum cutting length: 420 mm - Maximum cutting height: 200 mm - Maximum saw blade diameter: 520 mm - Weight: 310 kg - Saw blade speed: 2800 /min - Motor power: 7 hp - Serial number: 2024/95/5

Condition: used, Year of construction: 2014, functionality: fully functional, We offer this used Emmegi PRECISION TS2 TU/5, manufactured in 2014. It features a functional touch screen. Includes Emmegi Aspiratore MG4 dust extraction system. Weight: 1830 kg Operating pressure: 6-7 bar Speed: 2820 1/min Power: 7.5 kW Lhodpfxez Ikdks Akqjn Current: 16 A Voltage: 400 V Frequency: 50 Hz If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1991, cutting width 280 mm Cutting height 150 mm Motor output 2 x 4,0 kW saw blade 420 x 30 mm Cutting length 6000 mm speeds 2800 U/min air pressure 7 bar weight of the machine ca. 1750 kg dimensions of the machine ca. 7550 x 1600 x 1450 mm Furnishing: - Control E 255 - Extraction ESTA DUSTOMAT-22 Bj. 1998 - roller conveyor - 2x saw blade 120 x 4.0 x 30 Z96 Ledpfx Aszughbjkqshn

Condition: good (used), Rapid DGS Double Mitre Saw – used, fully operational, ready for demonstration For sale is a Rapid DGS double mitre saw in good, well-maintained used condition. The machine is immediately ready for use and can be demonstrated at any time. Features / Specifications: Model: Rapid DGS Lodpfxsxzdvis Akqjhn High-precision double mitre saw for aluminium, plastic, and, where applicable, light metal profiles Sturdy, robust construction Mitre cuts possible (both saw heads adjustable) Clean, technically sound used condition Cutting length: 4 m Saw blade: 3700x3.6/3.0x30 Z=108TF negative Machine dimensions (LxWxH): 5 m x 1.20 m x 1.50 m Cutting angles: 45-90° Condition: The machine is in fully functional condition. All functions can be tested live during inspection. Inspection & Collection: Inspection by appointment is possible. Collection by the buyer – loading assistance available if required (crane and forklift on site). Price: Negotiable If interested or if you have further questions, please feel free to contact us!

Condition: new, Year of construction: 2026, functionality: fully functional, New double miter band saw machine, equipped with a frequency converter. Lhsdpfxozu Db Ej Akqon Suitable for cutting various materials.

Condition: used, - 2250 mm cutting width Ledpfxshkm A Nj Akqohn - 80 mm cutting height - 2 x 3.7 kW saw motors

Condition: excellent (used), Catalog number 8051 TECHNICAL DATA - max. blade diameter 300mm - spindle diameter 30mm - 2 blade guards - pneumatic cutting (blade movement up/down) - sawing units adjustable at a 45° angle - manual adjustment of sawing unit spacing - min. cutting length at 90° 280mm - max. cutting length at 90° 3020mm - cutting height at 90 degrees 90mm - 2 pneumatic clamps - control pedal - material support - main motor 2x2kW - dust extraction nozzle diameter 2x60mm - dimensions (L/W/H) 3520x900x1450mm - weight approx. 500kg ADVANTAGES - unpainted - tilting sawing units - DTR documentation Net price: 15900 PLN Net price: 3698 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations) Lhodpfx Ajzrwrfekqen - used saw, very good condition

Condition: good (used), Code: 0252 Brand: MA BREVETTI Model: JUNIOR 275 Pneumatic double mitre saw for 45° + 45° cuts at both ends, in frames and mouldings of any shape and kind Technical data: Blade diameter mm 275 F30 Max cutting capacity: Width 70 mm - Height 90 mm Production rate approx. 700/800 cuts Motors n° 2 - 2 Hp each - rpm 2800 Power supply V.380/50 Operating pressure 6 bar Suction port diameter 100 mm Ledpfex Au A Njx Akqehn Overall dimensions mm 850 x 700 x 1400 mm Weight kg 265

Condition: used, Year of construction: 2003, used, good condition Machine cleaned, lubricated, partially overhauled. Various wear parts replaced. Test run with settings. Manufacturer: Rapid Model: DGS 200 Year of manufacture: 2003 Machine no.: 404 CE type-tested Motors: 2 x 2.2 kW Lhsdpfx Akeyclxpjqon Cutting width: 4000 mm Cutting depth: 130 x 140 - 100 x 230 - 60 x 270 mm Cutting height max.: 280 x 50 mm Max. blade diameter: 420 mm Manual tilt: 45° Linear feed: pneumatic Digital displays for cutting length 4x pneumatic workpiece clamping - 2x horizontal, 2x vertical Cylinders: 2 horizontal, 2 vertical Space requirement approx. 5100 mm x 1180 mm x 1280 mm Weight approx. 800 kg Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, saw blade diameter: 300 mm, rotational speed (min.): 8,600 rpm, overall weight: 2,000 kg, trimming length: 1,150 mm, SECOND-HAND DOUBLE END TENONER FOR 45 DEGREES PARQUET - 90* max. length 290-1150mm - ⁠60* max. length 350-1050mm - ⁠45* max. length 410-1050mm - ⁠Max. Thickness 50mm - ⁠N. 4 saw motors - 2.2kw each - ⁠Saw blade diam. 300mm - ⁠Tilting angle 0-20* - ⁠N. 2 milling cutter motors - 3kw each - ⁠Speed rotation 8600rpm - ⁠Adjustable feeding speed 0-10m/min Ljdozfikmjpfx Akqehn - ⁠N. 6 dust suction holes 100mm - ⁠Overall dimensions 3200x2050x1400mm - ⁠Weight 2000kg - ⁠Year 2023

Condition: used, Year of construction: 1968, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, saw blade bore: 32 mm, Equipment: documentation/manual, saw blade guard, - Saw blade arbor, 32 mm diameter - Two cutting speeds (1050 and 2100 rpm) => The saw can be used for both wood and plastic processing thanks to the two cutting speeds and the corresponding saw blades Lhedpfxjz E S Ncj Akqen - Locking possible at 45 or 90 degrees; cuts between these locking positions are also possible - 380 V electrical connection - Sold without saw blades - Includes operating manual

Condition: used, Year of construction: 2017, functionality: fully functional, Graule ZS 170 - digital length stop - digital angle indicator Lhodpfx Aozm R U Nekqjn - The infeed and outfeed roller conveyors are 3000 mm long. - Dust extraction system

Condition: used, Year of construction: 1982, machine/vehicle number: 27563, functionality: not functional, power: 2 kW (2.72 HP), input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: three-phase, total length: 750 mm, total width: 750 mm, ELU / ELUMATEC DG 79 double miter saw – defective / for DIY enthusiasts Ledey Ulvaspfx Akqjhn Selling a used ELUMATEC DG 79 double miter saw. The machine is explicitly sold as defective or untested. It is sold exclusively as a DIY project, for spare parts, or for repair. For safety reasons, the machine has been taken out of service. No guarantee regarding function or operational safety. The DG 79 is an industrial double miter saw for aluminum and plastic profiles, featuring a robust machine construction and pneumatic clamps. Technical data Manufacturer: ELU / Elumatec Type: DG 79 Machine type: Double miter saw Saw blade diameter: 380 mm Speed: 2,800 rpm Motor power: 2 × 3 kW Swivel range: 0°–45° left/right Minimum cutting length: 520 mm Maximum cutting length: depending on the model, up to 3,000 mm Cutting range approx. 195 × 120 mm at 90° Pneumatic material clamps Hydropneumatic feed 400 V high voltage Compressed air connection required Condition Used Sold explicitly as defective No guarantee No returns Inspection welcome Loading to be done by the buyer

Condition: excellent (used), Double side grinding machine for carbide saws Grifo model RFC6 Lhsdpfx Aj Aa Ig Tjkqjn

Condition: used, Striffler Type 2750-E double mitre circular saw for precise mitre and cross cuts in timber profiles, mouldings and frames. The machine is ideally suited to mass production in the window, door and furniture manufacturing sectors, thanks to its two pneumatically swivelling saw units and electronic positioning. Technical data: Lhjdpfxjzryu Ae Akqen - Cutting length: approx. 2,200 mm - Mitre angle: 45° – 90° - Workpiece: max. 50 × 70 mm - Further details: See PDF

Condition: used, Rema DMGB-35 double cross-cut saw, including an outfeed conveyor belt, for cross-cutting timber on both sides. This machine was specifically used for cutting doors to size. In its current condition, the cutting length is limited to 1,000 mm, but this can be extended. Lhodpfx Akezryuvjqen Technical data: - Belt length: approx. 1,700 mm + 2,700 mm - Cutting width: max. 2,500 mm - Cutting height: max. approx. 80 mm

Condition: ready for operation (used), Three drive units per side (top, bottom, side) Top and bottom motors: 2.2 kW Lhjdpfx Akoz Ii Afsqjn Side motor: 3 kW Spindle diameter: 40 mm Cutting length: 300 cm Overall dimensions: Length: 5.1 m Width: 185 cm Height: 150 cm

Condition: good (used), Miter saw ZS 170 N, including machine stand, 3 m infeed roller conveyor with left-hand stop, and 2 m outfeed roller conveyor. Lhsdpe Aax Hdefx Akqjn

Condition: used, Double tilt miter saw for elements with maximum length 1500 mm and maximum width 200 mm, used, tested. nr. 2 motors of 2 hp Lhjdezxg Euopfx Akqjn

Condition: good (used), Year of construction: 2012, I sell the automatic optimising end cutting saw Salvador Superpush 200, year 2012. Input table automatic feeding 5,10m (pusher system) Outut table 3,00m Total length: 9,00m Optimising with automatic cutting sequence modes. Lsdpfjyi Suwex Akqohn Available immediately. CE version. Documentation included.

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, documentation/manual, JWV service is proud to present the new Carif 260 Auto. Lhedpfozlf Dcex Akqon This fully automatic and compact bandsaw machine is manufactured in Italy using European components. As the importer, we can arrange a demonstration of the machine at your location.