Used miter saws for sale (81)

Condition: used, Year of construction: 1988, used in excellent condition low mileage cleaned functionally tested partially refurbished Manufacturer: Graule Type: AGT Year of manufacture: 1988 Machine No.: 05 Motor kW: 1.6 kW, 220 V Swivels to the right up to °: 45 Swivels to the left up to °: 45 Tilts up to °: 45 Machine base is mobile Nodpfx Aoz Ebtwsfujwl Cutting height mm approx.: 85 Cutting length mm approx.: 380 Blade diameter mm approx.: 300 Saw blade bore mm approx.: 30/40 Dust extraction connection mm: 80 Space requirement approx. L x W x H mm: 600 x 900 x 1000 Weight approx. kg: 50 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty or guarantee.

Condition: good (used), Year of construction: 1988, Double Mitre Saw Düspohl DGK 400 B Stock number: 001071 Double Mitre Saw Düspohl Type: DGV 400 B Year of manufacture: 1988 Swivelling saw blades Max. cutting length: 2500 mm Approx. cutting height: 70 mm Max. saw blade diameter: approx. 300 mm Was used for door frames Motor power: 4 kW Location: ex stock 54634 Bitburg - immediately available - Nsdpfx Afeyv R Nzjujwl

Condition: used, Year of construction: 2003, functionality: fully functional, input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, saw blade diameter: 520 mm, saw blade bore: 50 mm, We offer this used GRAULE ZS 200 - F miter saw, year of construction 2003. Manufacturer: GRAULE Model: ZS 200 - F Serial number: 2003/3-13 Year of manufacture: 2003 Saw blade diameter: 520 mm Bore diameter: 50 mm Rated voltage: 400/230 V Rated current: 6.4 A Frequency: 50 Hz If you have any questions or need more information, feel free to send us a message or give us a call. Nodozx N T Ijpfx Afuowl

Condition: new, Year of construction: 2026, machine/vehicle number: ZS170N mit ES-F3, functionality: fully functional, power: 3 kW (4.08 HP), cutting height (max.): 170 mm, cutting width (max.): 410 mm, saw blade diameter: 420 mm, tilt adjustment saw blade: 45 °, saw blade bore: 40 mm, actuation type: manual, total length: 6,400 mm, total width: 1,200 mm, total height: 1,550 mm, table height: 920 mm, Equipment: CE marking, Mobile saw carriage, overall length 6400 mm, with a Graule SZ170N saw mounted on it. Stop roller track with folding stop and scale on the left side, 3100 mm, measuring length on the folding stop 3050 mm + attached extension with stop and scale for a measuring length up to 5000 mm. Feed roller track on the right side, track length 3000 mm. Track width on the left and right sides is 500 mm. Crosscut and miter circular saw ZS170 N, cutting height at 90° is 170 mm, at 45° inclination is 115 mm. Nwjdpfx Afszwn T Rsuel Cutting length is 410. Machine can be tilted on both sides using a hand crank, up to 45° to the left and up to 60° to the right. Machine with carbide-tipped circular saw blade for wood, 420x4.0x40 mm, 48 teeth.

Condition: good (used), Code: 0482 Brand: OMS SALVARANI Nwjdpfxjz Ebdio Afuel Model: FC 350 R - CE Standard Crosscutting machine with base frame for wood, aluminium, PVC, plastic, etc. - CE Standard Technical data Blade diameter mm 350 Three-phase motor Watt 2800 - Rpm 3000 Cutting capacity height mm 145 Cutting capacity width at 45 degrees mm 113 Cutting capacity width at 90 degrees mm 160 Base complete with suction Overall dimensions mm 800 x 600 x 1500 h Weight kg 110

Condition: excellent (used), functionality: fully functional, power: 2 kW (2.72 HP), cutting height (max.): 135 mm, saw blade diameter: 350 mm, saw blade bore: 30 mm, Motor power: 2.0 kW Speed: approx. 2,800 rpm Saw blade: Ø 350 mm Saw blade bore: Ø 30 mm Cutting height at 90°: max. 135 mm Cutting length at 90°: max. 430 mm Miter adjustment: on both sides Swivel range, vertical: adjustable for bevel cuts Saw unit: can be moved on a precise guide Saw blade feed: manual Njdoz D I Hnspfx Afuswl Power supply: 400 V / 3 phases / 50 Hz Machine table: stable rotary table with angle scale Description: Robust and precise GRAULE ZS 135 under-table sliding miter saw for cutting to length, as well as for miter and bevel cuts.

Condition: excellent (used), Catalog number 8048 TECHNICAL DATA - max. disc diameter 400mm - disc bore diameter 30mm - disc guard - cutting height 100mm - max. cutting width 640mm - possibility of angled cutting in the vertical plane - arm adjustment or disc adjustment - arm rotation capability: right/left - motor 400V, 3kW - table dimensions 1600x950mm - dust extraction nozzle diameter 60, 100mm - dimensions (L/W/H) 1500x1600x1500mm - weight 240kg Nwjdjzx Sqpopfx Afuel ADVANTAGES – Made in Italy – Unpainted – DTR documentation included – Very good condition – Used saw Net price: 9500 PLN Net price: 2209 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to exchange rate fluctuations)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, type of input current: three-phase, saw blade bore: 800 mm, Equipment: saw blade guard, scorer, We offer for sale a modern CNC miter saw, Easy Cut 828 PLUS, manufactured in 2023, designed for professional production of wooden structures, roof trusses, frameworks, and other wooden components. The machine is in excellent technical condition and ready for immediate use in production. Main advantages of the machine: ✔ CNC control with a touch screen, easy operation, and the ability to load projects via USB, LAN, or Ethernet. ✔ Automatic linear material feed using a servo motor. ✔ Cutting at any angle with 4 controlled axes. ✔ Cutting materials up to 13m in length. ✔ Rotating the saw blade 360°. ✔ Tilting the blade from 90° to 38°. ✔ 15m input conveyor. ✔ 5.5m output conveyor. ✔ Saw blade diameter of 800 mm. ✔ Automatic optimization of cuts with minimal material waste. ✔ Marking of cut parts directly on the machine. Nodpfxszlrn Uo Afujwl ✔ Pneumatic horizontal and vertical material clamping. ✔ High accuracy, speed, and safety. ✔ Manual and fully automatic operating modes. ✔ Online service support via internet connection. ✔ Full compatibility with MiTek software for truss production. Technical solution: The machine consists of an input conveyor, a CNC sawing unit, and an output conveyor. The material feed is provided by a servo motor with high positioning accuracy. The sawing unit allows for cutting precise lengths and complex angular cuts with an adjustable center axis.

Condition: used, Year of construction: 1992, Second-hand machine Year of manufacture: 1992 Features and technical specifications: - can be swivelled up to 45° in both directions - For vertical mitre cuts, the saw blade can be tilted up to 45° on one side - Motor: 2 kW, 400 volts, 2800 rpm - Saw blade diameter 300 mm - Extraction nozzle diameter 75 mm - Cross-cuts 380 x 85 mm - Mitre cuts, saw blade in vertical position, tilted 45° to the left or right tilted 265 x 85 mm - Mitre cuts, vertical, saw blade tilted 45° to the left 380 x 60 mm Availability: at short notice Nwjdpfxozk Nxhe Afuol Location: 63934 Röllbach

Condition: used, Year of construction: 1982, machine/vehicle number: 27563, functionality: not functional, power: 2 kW (2.72 HP), input voltage: 380 V, input current: 10 A, input frequency: 50 Hz, type of input current: three-phase, total length: 750 mm, total width: 750 mm, ELU / ELUMATEC DG 79 double miter saw – defective / for DIY enthusiasts Selling a used ELUMATEC DG 79 double miter saw. The machine is explicitly sold as defective or untested. It is sold exclusively as a DIY project, for spare parts, or for repair. For safety reasons, the machine has been taken out of service. No guarantee regarding function or operational safety. The DG 79 is an industrial double miter saw for aluminum and plastic profiles, featuring a robust machine construction and pneumatic clamps. Technical data Manufacturer: ELU / Elumatec Type: DG 79 Machine type: Double miter saw Saw blade diameter: 380 mm Speed: 2,800 rpm Njdpfey Ulvasx Afuswl Motor power: 2 × 3 kW Swivel range: 0°–45° left/right Minimum cutting length: 520 mm Maximum cutting length: depending on the model, up to 3,000 mm Cutting range approx. 195 × 120 mm at 90° Pneumatic material clamps Hydropneumatic feed 400 V high voltage Compressed air connection required Condition Used Sold explicitly as defective No guarantee No returns Inspection welcome Loading to be done by the buyer

Condition: used, power: 2 kW (2.72 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 135 mm, height adjustment type: mechanical, rotational speed (max.): 3,800 rpm, rotational speed (min.): 3,800 rpm, Graule cut-off and miter saw ZS 135, max. cutting height 135 mm, max. cutting width approx. 430 mm, saw blade D = 350 mm, miter adjustment +45°/0°/-45°, Nwsdpfx Afjy Sla Tjuel motor 2 kW, dust extraction port D = 100 mm, as inspected, Ex Works, from the Seevetal location, excluding transport, subject to prior sale.

Condition: excellent (used), functionality: fully functional, Saw in very good condition. Nwedpfxey Tt Hde Afujl Includes towing brake.

Condition: like new (used), Motor power: 3.7 kW (5 HP) Nodpozx Ucbofx Afuewl Table dimensions: 1200 × 800 mm Cutting angle adjustment: 3 positions Speed: 3000 RPM Voltage: 380 V

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, For sale: KOCH net saw—optimized for fast and precise trimming of furniture components, especially drawer sides. The machine ensures a clean, net cut (with no tears or edge defects)—a solution significantly faster than cutting on panel saws. Nwodpfjyyyfyjx Afusl Key features and specifications: - PLC control—automatic operation (separately retrofitted) - Buffer magazine for workpieces - Pusher beam on hydraulic system—feeds part to next operation - Maximum machine span: 2 m - Maximum feed speed: 12 m/min - Drive can be activated from both sides of the machine - Top scoring saw blades for cutting components from above - Spindle speed approx. 4,500–5,000 rpm (motors: 2,100 rpm) - Complete safety covers and safety sensors - Ready production of 'drawer ribbon' (final-sized drawer banding) The top saws are used for producing complete drawer bands (ready-to-install components). Example: a 640 mm long piece is surfaced/truncated from above and divided into 3 parts, so by adding the drawer front and bottom, you have a finished drawer without any additional side processing. Performance: For a sample drawer side (350 x 100 mm): approx. 25,000–30,000 pieces per shift (highly efficient production). Location: Elbląg Loading is the responsibility of the buyer/assistance available on site. Please feel free to get in touch—I’ll be happy to answer any questions.

Condition: excellent (used), Year of construction: 1997, machine/vehicle number: 90F, functionality: fully functional, Double miter saw with circular blades of 250–275 mm diameter and cuts at 45°+45° with fixed fence. Nwjdpfxoy Iag Tj Afuel The operator performs the 45° horizontal cut by pulling one blade at a time. Wide cutting capacity (120 mm width x 80 mm height). Precise and high-quality cuts in soft and hard woods – PS and all MDF materials. Low noise and high safety standards. Particularly suitable for all picture framers with small production runs.

Condition: excellent (used), functionality: fully functional, power: 5 kW (6.80 HP), input voltage: 400 V, input frequency: 50 Hz, cutting width (max.): 295 mm, saw blade diameter: 520 mm, saw blade bore: 50 mm, rotational speed (max.): 2,800 rpm, overall weight: 300 kg, cutting depth: 200 mm, extraction nozzle diameter: 100 mm, Further technical data Cutting width: 90° 420 mm | swivelled at 45° 295 mm Cutting depth: tilted at 45/90 degrees 140 mm | 200 mm Nodextpuuopfx Afuswl Special equipment 1019 Machine tiltable on both sides from the front via hand crank 1002 Hydraulic feed brake 1049 HM circular saw blade for wood 520x4.0x50 mm / 60 teeth negative

Condition: used, Technical specifications: Max. blade diameter: 300 mm Njdpfszht Sajx Afuewl Cutting range: 45° Pneumatic clamping Blade guard Pneumatic blade lifting Operating pressure: 6 bar Safety switch Power supply: 400 V Motor power: 2 x 1.5 kW

Condition: used, Double tilting vertical cutting machine Njdjzxg Dkspfx Afuewl

Condition: good (used), Year of construction: 1993, 1 x Graule Crosscut and Mitre Circular Saw Type ZS 170 Technical data: - Motor: 400 V / 3.0 kW - Speed: 3500 rpm - Cutting length: 410 mm - Cutting width: 410 mm at 90° / 290 mm at 45° Nsdpeyxxzwefx Afuswl - Cutting height: 170 mm at 90° / 115 mm at 45° - Mitre range horizontal: 45°-90°-25° - Saw blade diameter: 420 mm - Extraction port diameter: 100 mm - Weight: 120 kg Location: ex-stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Crosscut and Mitre Circular Saws Graule ZS 135 Motor: 400 V / 2.0 kW Speed: 3800 rpm Cutting length: 430 mm (at 90°) Cutting height: 135 mm Mitre range, horizontal: 45°-90°-25° Njdpfx Asymqklsfuowl Saw blade diameter: 350 mm Extraction port: 100 mm Weight: 100 kg

Condition: good (used), Year of construction: 1997, I sell the double mitre saw OMGA TI2500 Super. Cutting length 230 - 2500mm Cutting width max. 1500mm Cutting height max. 115mm Saw cutting aggregate main blade + scoring blade each side. Fully tilting - 45 up to + 45 ° 2 Motors x 4,0kW (5,5 HP) Good condition. Available immediately. Nodsxtxh Dopfx Afuewl

Condition: good (used), Year of construction: 1988, functionality: fully functional, Double mitre saw DG79 - 2 x 2 kW - 380 Volt - Year of manufacture: 1988 - 2100 / 3800 rpm - Saw blade 330 mm Ø - Cutting area at 90°: 195 x 90 mm; at 45°: 135 x 90 mm - Minimum cutting length 500 mm, maximum approx. 3300 mm - Compressed air 6-8 bar / 250 l/min - Weight: approx. 500 kg - Pneumatic clamping device Transport available at extra cost! Nodpoygm Akjfx Afuswl Due to the age of the used machine, warranty is excluded for commercial customers.

Condition: used, Technical specifications: Max. saw blade diameter: 350 mm Saw feed: manual Max. cutting height at 0°: 150 mm Max. cutting width at 0°: 150 mm Max. cutting height at 45°: 150 mm Max. cutting width at 45°: 105 mm Power supply: 400 V Motor power: 2.2 kW Nedoziklaepfx Afuewl Manufacturer: OMS Overall dimensions: Length: 1040 mm Width: 700 mm Height: 1630 mm

Condition: used, Technical specifications: Njdozikl Hjpfx Afujwl Saw blade diameter: 350 mm Manual feed Max. cutting height: 105 mm Max. cutting width: 140 mm Angle cutting capability Max. cutting height at 45°: 105 mm Max. cutting width at 45°: 100 mm Power supply: 400 V Motor power: 2.2 kW

Condition: used, Year of construction: 1980, Graule ZS 85 N Cross-cut and mitre circular saw, tiltable ~ Year of manufacture: 1980 400 Volt three-phase, 2 kW Saw blade diameter: 350 mm, bore: 30 mm Cutting height: 85 mm Cutting length: 380 mm at 90° Cutting length: 270 mm at 45° Extraction port D = 100 mm Nwodjyv Aa Sopfx Afuel