Used miter saws for sale (81)

Condition: good (used), Table and mitre saw TGS 173 with sliding table - on mobile base cabinet with 2 drawers - Adjustable feet not included Bdodpex R Eadsfx Ab Uea

Condition: new, Year of construction: 2026, crosscut and miter saw type: ZS 200 N - 5 KW motor with machine stand, but without saw blade Bjdpei Dfidofx Ab Ujda Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake u. Automat. Star delta motor control cutting width at 90deg: 420 mm cutting width at 45deg: swivelled: 295 mm Cutting height at 90deg: 200 mm Cutting height at 45deg tilted: 140 mm Saw can be tilted on one side up to approx. 25 degrees to acute angles and tilted flat to the left up to 30 degrees Machine stitched: approx. 250 kg Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2026, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Bodpfx Abek H Ic Uj Uoda Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: swiveled: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees inclined: 140 mm Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Mounting side: Right Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Location: From stock 54634 Bitburg - immediately available - Picture: similar. Machine is still in original packaging

Condition: excellent (used), Sprossen punching machine 12 mm Used, in top condition Manufacturer: Schleicher Sprossen knife 12 mm Right extension table with stop slider Required space approx. 1100 mm x 600 mm x 1100 mm Weight approx. 65 kg Storage location: 54634 Bitburg, loaded free, unpacked Bodpfxew Hlztj Ab Ujda Handover in as-inspected condition, without guarantee or warranty

Condition: good (used), Heavy-duty universal carpentry circular saw, carpentry universal circular saw, miter saw, crosscut and miter saw, joinery circular saw -Manufacturer: Schneider Carpentry Machines, CNC joinery circular saw with roller conveyor, laterally movable left/right -Type: SLS 28 -Circuit saw: for crosscuts, miter cuts, bevel cuts, rip cuts, -Circuit saw: for cutting valley rafters, eaves boards, chamfers, and wedge boards -Saw unit: swivels 30°, rotates 180° -Drive motor: 11 kW -Saw blade: Ø 750 mm -Cutting height: max. 280 mm at 90° -Cutting height: max. 140 mm at 30° -Cutting width: max. 550 mm -Roller conveyors: 5020/750/H970 mm / 2000/750/H970 mm 320 kg Bjdpfxex Ityyo Ab Usda -Saw dimensions: 2400/2130/H1600 mm 984 kg -Total weight: 1304 kg

Condition: used, Technical data: Max. saw blade diameter: 400 mm Min. saw blade diameter: 300 mm Saw spindle diameter: 30 mm Guide rail length: 1100 mm Miter cutting range: from –80° to +80° Bevel cutting range: from 0° to 90° Work table dimensions: 835x1175 mm Saw blade guard Power supply: 400 V Motor power: 3 kW Overall dimensions: Length: 1400 mm Bdedpfxeyhnkfo Ab Uea Width: 1175 mm Height: 1600 mm

Condition: good (used), Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner Bdsdpfx Absh U U S Ro Uoa -Manufacturer: Kaltenbach, Double miter saw type DKL 500 -Cutting length: 245 to 4180 mm -Saw units: swivels 45° -Saw blade: Ø 490 mm -Accessories: incl. additional saw blades, see photos -Overall dimensions: 5130/1100/H1410 mm -Total weight: 1154 kg

Condition: good (used), Miter saw, saw unit right/left, double miter saw, crosscut and miter saw, double end tenoner Bjdpfx Absgzc Iye Ujda -Double miter saw: Saw unit right and left from Rapid DGL / BFA saw-drill-milling machine -Motor: Sky 3.0 kW / 2790 rpm -Saw unit: swivels 45° -Saw blade: Ø 410 mm -Price/Fee: complete -Overall dimensions: 1060/760/H680 mm -Total weight: 240 kg

Condition: used, Year of construction: 1999, functionality: fully functional, OMS FC 350 R 2.2 kW Mitre Crosscut Saw – fully serviced, ready for operation Specification: • Condition: Used, after comprehensive technical inspection • Manufacturer: OMS • Model: FC 350 R • Blade diameter: 350 mm • Saw motor: 2.2 kW • Maximum cutting dimensions at 90°: 115 x 150 mm (height x width) • Saw blade guards for operator safety • Integrated internal chip extraction system Bdodpfxjyhg Ebj Ab Uoa • Cutting angle adjustment: +/- 45 degrees • Year of manufacture: 1999 • CE markings • Overall dimensions (without tables): 85 x 81 x 160 cm (L x W x H) Additional information: • The machine is in very good technical condition, ready for immediate use • The photos shown present the actual item for sale • Possibility to power on and check the machine on-site • The auction price does not include VAT or transport costs Financing and transport: • We organize transport with our MDD fleet, courier companies or external carriers • Financial support available in the form of leasing or lease-loans

Condition: new, NEW Description: - Crosscut and miter saw with maximum cutting height of 135 mm - Machines can be mitered in 2 levels - Stable gray cast iron construction - Precise ball bushing guide of the tool carriage on hardened and ground steel shafts - Manual saw feed - Fast miter adjustment up to 25° horizontally and up to 45° vertically - Readjustable fixed stops at 90° and 45° - Lower saw blade guard can be connected to the extraction system Scope of delivery: Crosscut and miter saw type ZS 135 N without saw blade Technical data: - Motor: 400 V / 2.2 kW - Speed: 3800 rpm - Cutting length: 430 mm - Cutting width: 430 mm at 90° / 300 mm at 45° - Cutting height: 135 mm at 90° / 92 mm at 45° - Miter range horizontal: 45°-90°-25° - Miter range vertical: 90°-45° (tilted to the left) - Saw blade diameter: 350 mm Bdsdpfxevwf T Sj Ab Uea - Extractor nozzle diameter: 100 mm - Weight: 100 kg

Condition: new, 400 Volt Drehstrom-Bremsmotor 5,0 kWSägeblattdurchmesser 520 mm,Sägeblattaufnahme 50 mm,Schnitthöhe 200 mmSägeblatt auf 45° geneigt: Schnitthöhe 140 mm,Schnittlänge 420 mm,mit Maschinenständer und Handkurbel hintenzur Neigungseinstellung Bjdpfxovxr Tho Ab Ujda

Condition: used, Year of construction: 1986, incl. 2 saw blades d, good conditionmake Grauletype ZS 85 Nyear of manufacture 1986motor 2.2 kWcutting height approx. 85 mmcutting length approx. 380 mmblade diameter approx. 300 mmsaw blade bore approx. 40 mmswivel right up to 45°swivel left up to 45°tiltablemachine basefeed brakematerial system made of aluminum-steelnew price approx. 5.000,00 € with accessoriessuction connection D 80 mmweight approx. 150 kgstorage location 97447 Gerolzhofen, free loaded, unpackedhandover in actual condition as inspected,without guarantee and warranty Bedevwfg Eepfx Ab Uoda

Condition: new, Description:- Crosscut and miter circular saw with a maximum cutting height of 170 mm- Miter-adjustable machines in 2 levels- Stable gray cast iron construction- Precise ball bushing of the tool slide on hardened andground steel shafts- Manual saw feed- Fast miter adjustment up to 25 ° horizontally and up to 45 ° vertically- Readjustable fixed stops at 90 ° and 45 °- Lower saw blade protection can be connected to the suction systemScope of delivery:1 x Graule crosscut and miter circular saw, type ZS 170 Nincluding additional charge for 3 kW 400 volt motor1 x machine stand for type ZS 135 N and ZS 170 NTechnical specifications:- Motor: 400 V / 3.0 kW- Speed: 3500 rpm- Cutting length: 410 mm- Cutting width: 410 mm at 90 ° / 290 mm at 45 °- Cutting height: 170 mm at 90 ° / 115 mm at 45 ° 2- Horizontal miter range: 45 ° -90 ° -25 °- Vertical miter range: 90 ° -45 ° (inclined to the left)- Saw blade Ø: 420 mm- Suction nozzle Ø: 100 mm- Weight: 120 kg Bdjdsvwf Rdopfx Ab Uea

Condition: used, Year of construction: 2008, fully equipped, with cutting extension to 540 mm incl. HM special blade 350 x 3.5 x 40, 108 trapezoidal teeth flat tooth, negative rake for aluminum cuts used, top condition, low hours Manufacturer: Graule Model: ZS 135 Year of manufacture: 2008 Machine no.: 2008/30/23 CE pattern tested Motor 2 kW Brake motor Cutting height approx. 135 mm Large cutting length extended to approx. 540 mm Blade diameter approx. 350 mm Saw blade bore approx. 30 mm Bedeww Nd Tjpfx Ab Ujda Tiltable right Tiltable left Machine base Roller table right 3000 mm with stop and scale – RLH with handwheel adjustment, pneumatic clamping, and electronic digital display Roller table left 5000 mm, type RO Feed brake Material support made of aluminum Coolant spraying system 2 x pneumatic workpiece clamps right + left Pressure reducing valve Original price approx. €12,750.00 Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee.

Condition: used, cleaned, partially refurbished, with new support plate used, in good condition Manufacturer Graule Bodpfow En Igex Ab Uoda Type ZS 85 N GS-certified Motor 2.5 kW 220 V Cutting height approx. 85 mm Cutting length approx. 350 mm Blade diameter approx. 300 mm Swivels right Swivels left Tiltable up to 45° Storage location: 97447 Gerolzhofen, free loaded, unpacked Handover in the actual condition as inspected, without any warranty or guarantee

Condition: used, Year of construction: 1999, functionality: fully functional, Crosscut saw, miter saw OMS FC 300 RAP 2.2 kW – after technical inspection Specification: • Technical condition – used, after inspection • Manufacturer – OMS • Model – FC 300 RAP • Blade diameter – 300 mm • Saw motor – 2.2 kW • Max. dimensions of workpiece at right angle: 95 x 125 mm (height x width) • Saw blade guards for operator safety • Extraction port – diameter 60 mm • Cutting angle adjustment: +/- 45 degrees (machine does not maintain perfect accuracy at extreme angles) • Year of manufacture – 1999 Bsdpfjyg R Spex Ab Ujda • CE marking • Overall dimensions without tables: 75 x 75 x 70 cm (L x W x H) Additional information: • The machine is in decent technical condition, ready for immediate use • The presented photos show the actual condition of the item for sale • Possibility to power up and inspect the machine on site • The price listed in the auction does not include VAT or transportation costs Financing and transport: • We organize transport via MDD fleet, courier services, or external carriers • Financial support available in the form of leasing or lease loans

Condition: used, Crosscut Saw, Mitre Saw OMGA T50.350 2.2 kW - after technical inspection, ready for operation Specification: • Technical condition – used, after inspection • Manufacturer – OMGA Bdedpfxsyg R Nuo Ab Usa • Model – T50.350 • Blade diameter – 350 mm (bore 30 mm) • Saw motor – 2.2 kW • Max. dimensions of cut element at 90°: 100 x 165 mm (H x W) • Safety covers on the saw for operator protection • Extraction outlet – ø80 mm • Cutting angle adjustment: +/- 45 degrees • Overall dimensions without extension tables: 75 x 62 x 80 cm (L x W x H) Additional information: • The machine is in good technical condition, ready for immediate use • The attached photos show the actual condition of the item for sale • On-site inspection and operation check possible • The price listed in the auction does not include VAT or transport costs Financing and transport: • We organise transport by MDD fleet, courier companies, or external carriers • We offer financing support in the form of leasing or lease loans

Condition: good (used), In today's auction I have to offer you a kap saw / mitre saw from the excellent Italian company OMS model T14 with a scissor table. Bdodpjkt N H Usfx Ab Usa Below some useful information about the saw: * saw diameter 300 mm * 1700 W motor ( single phase ). * max dimensions of the cut element: 120 x 120 mm ( H x W ). * guards on the saw for the safety of the saw operator. * cutting adjustment +/- 45 degrees * table with dimensions of 32 x 42 cm * extraction stub fi 60 mm. * very good technical and visual condition * 1997 year of production * Complies with CE standards. * overall dimensions of the saw 65 x 70 x 60 cm (width x length x height).

Condition: good (used), Cap saw, PEGIC mitre saw Specification: - blade diameter - max 200 mm - engine power - 0.8 HP - spindle - 20 mm - cutting adjustment +/- 45 degrees - cutting cross-section - 4 x 14 cm - overall dimensions 50 x 48 x 70 cm ( W x D x H ) Additional information: Bedpfx Aetrwvrsb Uoda * factory technical and visual condition * presented photos illustrate the actual state of the object of sale * possibility to turn on and check the device on site. * the price listed in the auction does not include VAT.

Condition: used, Year of construction: 2004, 2 blades Automatic ascent Pneumatic pressers Bdodoxzpwlspfx Ab Usa Adjustment stops 380V

Condition: excellent (used), blade diameter 300mm motor power 1,6HP - 1,16kW Bdodpfsnr Hd Ajx Ab Uoa max cutting dimensions 100x135mm angle cutting +/- 45 degrees

Condition: new, A twin blade saw that has been specifically designed for cutting glazing beads accurately to length, with either a straight or mitred cut. The machine has two work-levels one set above the other, allowing two lengths of beading to be cut simultaneously. The two lengths of bead are held secure during the cutting operation by the front pneumatic clamps. Setting the correct length is achieved by means of handwheel moving the left head in relationship to the fixed right head, the length is easily read from the mechanical digital display. Min/Max. cutting length 150mm - 2400mm Max. cutting section at 90° 55 x 100mm Bsdpfxody Hqve Ab Usda Max. cutting section at 45° 40 x 100mm 2 x sawblades dia. 220mm x 30mm bore Motor 1.6hp, 3 phase CE Safety requirements

Condition: new, Year of construction: 2022, New machine Year of manufacture 2022 Motor 400 V / 5.0 kW speed 2800 rpm cutting length 420 mm Cutting width 420 mm at 90 295 mm at 45° Cutting height 200 mm at 90° 140 mm at 45 Saw can be tilted on one side up to approx. 25° to acute angles and tilted flat to the left up to 30°. Saw blade-Ø 520 mm x 50 mm Bodpjkwhmfefx Ab Ujda suction nozzle-Ø 100 mm Weight 250kg With the following equipment options: - HM circular saw blade 520x4,0/2,8 x 50 60 WZ for wood - Machine can be tilted on both sides from the front via hand crank Availability: short term/2022 Location: Solingen

Condition: ready for operation (used), functionality: fully functional, saw blade diameter: 250 mm, rotational speed (min.): 3,250 rpm, Brevetti C15 Double Mitre Saw Machine designed for cutting at a 45° angle Applications include trimming: decorative frames, cabinet door frames, glazing beads Saw blade size max/min: 275/250 mm Bdsdpfxjxyxhde Ab Uoa Saw blade speed: 3250 rpm Motor power: 2×1.5 kW Pneumatic material clamping Pneumatic feed of the cutting unit 2x extraction ports 100 mm

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Circular saw in very good condition Bdsdpot Uk Rmsfx Ab Uoa