Single shaft shredder

Robust Reuser SD 60_18,5kW

Condition: used, Year of construction: 1988, 105 twinband linear pm for upto 300mm round logs 4mtr length, this is a complete round to finish sawing system, breaking round logs down to return and resaw everything to a finished product, high production and minimum waste Gedpsm Rhfdjfx Am Esbw

Condition: new, Year of construction: 2022, Diameters 40-140mm Engine 2.2kW Gbodpfx Amedprvuo Esw Price per 1 piece

Condition: used, machine/vehicle number: 13398, Rotor diameter: 300 mm Rotor width: 1400 mm Gbsdpfx Aeyr Tx Aem Ejw Rotor knives: 76 / 114 Stator knives: 1 row Infeed opening approx. 1400 x 1050 mm Drive motor: 2 x 30 kW

Condition: refurbished (used), Year of construction: 1975, functionality: fully functional, CANALI Vertical Automatic High-Performance Block Bandsaw Model BBS.V "PACIFIC" K/L-B-P 1800, Type 555, Year of Manufacture 1975 with control panel in the cabin, Gbodpfxoxvrnie Am Eow bandsaw wheels Ø 1800 mm, bandsaw wheel width 280 mm, max. saw blade width 310 mm, bandsaw blade length 11,500 mm bandsaw size 11495x310x1.85x55 log infeed system approx. 20 m long, four-strand system with inserter block carriage with ejector onto block cross conveyor CANALI pneumatic clamping carriage, Type 501.09 with 4 clamping jaws, 3 log turners, 4 ejectors, drive power 100 kW, carriage speed 5-120 m/min. powered roller conveyor with slab removal with brush, lifting device with puller for trimming complete electrical switchgear cabinets complete sharpening room equipment for bandsaw blades

Condition: used, Year of construction: 2022, load capacity: 2,500 kg, lifting height: 5,850 mm, total length: 5,145 mm, ・Maximale seitliche Reichweite: 3.40 m ・Ausbrechkraft mit Schaufel: 3427 daN ・Kippwinkel 12 ° ・Schüttwinkel 117 ° ・Wenderadius (über Räder) 3.31 m ・Eigengewicht (mit Gabel) 4800 kg ・Bereifung: Pneumatisch ・Heben 8 s ・Senken 5.40 s ・Teleskop ausfahren 5.60 s ・Teleskop Einfahren 4.30 s ・Ankippen 3.50 s ・Auskippen 3.60 s ・Anzahl der Zylinder / Tragfähigkeit der Zylinder 4 - 3331 cm³ ・Nennleistung Verbrennungsmotor - Leistung (kW) 75 Hp / 55.40 kW ・Max. Drehmoment / Motordrehzahl 265 Nm @ 1400 rpm ・Zugkraft 3550 daN ・Anzahl der Gänge (vorwärts / rückwärts) 2 / 2 ・Max. travel speed 24.90 km/h ・Parkbremse Automatische negative Parkbremse ・Festellbremse Ölbad Lamellenbremsen an den Vorderachsen ・Pumpenart Zahnradpumpe ・Hydraulikdruck 235 bar ・Motoröl 11.20 l ・Hydrauliköl 115 l ・Fassungsvermögen des Kraftstofftanks 63 l ・Geräuschpegel im Fahrerstand (LpA) 76 dB ・Umgebungsgeräusch (LwA) 104 dB ・Schwingungsbelastung Hand/Arm < 2.50 m/s² ・Lenkräder (vorne / hinten) 2 / 2 ・Antriebsräder (vorne / hinten) 2 / 2 ・Sicherheit / Sicherheit Zulassung der Kabine Standard EN 15000 / Kabine ROPS - FOPS Stufe 1 ・Steuerungen JSM Godpsztgl Djfx Am Eobw

Year of construction: 2026, condition: new, Oscillating screen ASM series S&F oscillating screens and horizontal screens are used in many areas of the wood processing industry (sawmills, pelleting plants). Screening machines of the "ASM" series screen wood chips, wood pellets, sawdust and sawdust, waste wood, biomass and many other sawmill by-products in dry and wet applications. The material-protecting, horizontal-circular screening movement of the inclined screen box ensures a high separation efficiency of the vibrating screen. One advantage of the screening machine is that long and fibrous particles glide diagonally to tangentially over the screening surface. This means that - in contrast to throw screens - no jamming or plugging grain occurs. Further advantages are the robust design, the high screening capacity and the long, low-maintenance running time of the screening machine. In addition to standard dimensions, the company also supplies the "ASM" series as a "customising solution" in a split design for existing plants. This makes it possible to use new screening machines in cramped and difficult-to-access spaces in existing plants or sawmills. Screening machines of the "ASM" series offer screen sizes from 0.5 to 15 m² (per screen deck) and are characterised by a high screening capacity (up to 350 m³/h - depending on the material). At a glance: - Ideal for: Wood chips, pellets, sawdust, biomass, bark, waste wood, substitute fuel. - Areas of application: Wood industry, recycling and waste disposal, animal feed - Screening area: 0.5 - 15 m² (30 m² as double deck) - Screening capacity (depending on material): up to 350 m³/h - Separation size: 0.1 - 150 mm (depending on size) Gbsdpfx Aein Ey Ssm Eew - Drive power: 0.55 - 15.0 kW (depending on size) Advantages: - High screening capacity - High separation efficiency - No jamming and plugging - Low noise and low maintenance - Flexible use - Individual production Do you need further information? Please contact us! We will be happy to advise you.

Condition: good (used), Wood shredder for sale Prepared for conveyor belt removal Ideal for shredding wood residues (all types of softwood) and pallets Includes hydraulic pusher Motor: 7.5 kW Gbsdpfjxbyx Tjx Am Eow Rotor width: approx. 82 cm Weight: 1,460 kilograms Full load current: 32 amp Main fuse: 35 amp

Condition: new, Year of construction: 2025, functionality: fully functional, power: 18.5 kW (25.15 HP), AZR 600 – 18.5 kW 30 round knives with welded knife holders incl. 2 knife rows = 30 knives "V5" Screen: 15/20 mm Angled machine frame Pusher with hold-down device Vibration-damping machine feet Automatic star-delta start-up Automatic shutdown when hopper is empty Control cabinet with 5 m cable and PLC-controlled Feed opening: 600 x 800 mm Gbjdpfxoi Hb Iae Am Ejw Hopper volume: 0.6 m³ Rotor diameter: 252 mm Main motor: 18.5 kW – 400 V – 50 Hz – 3 Ph. Hydraulic motor: 0.75 kW – 400 V – 50 Hz – 3 Ph. Subject to technical changes and errors.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, Vertical log bandsawline Primultini with side chippercanter, from 2016, max log length 7,2 m, diam 20-100 cm Vertical log bandsaw Primultini 1400SHF-CEI Chipper canter Primultini WSF Saw Path cleaning machine Multiripsaw Paul KME3-1012-L Gbodez N Tdwspfx Am Eow Loginfeed and conveyors between machines Operating Electronics Line stands under power and can be started-up for demo without logs

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Log handling line, LINCK sawmill line, lumber sorting line with stacking system Log handling line: - Infeed - Cut-to-length - Turner - Emergency outfeed channel, possibility of log discharge - Root flare reducer (butt reducer) - Valon Kone debarker - Metal detector - Hellak DLV 720 - Log sorting line - 32 boxes LINCK sawmill line: LINCK Canter V40, year 1997 • Max. roundwood diameter: 650 mm • Min. roundwood diameter: 100 mm • Max. log length: 6 m • Min. log length: 3 m • Feed speed (30-80Hz): 25-70 m/min • Cutter head drive power: 90/132 kW • Number of knives: 3 • Cutting depth: 160/200 mm LINCK Multi-rip saw CSMK 375-A3/B3, year 1997 • Min. timber length: 3.00 m • Min. cutting thickness: 50 mm • Max. cutting thickness: 375 mm • Feed speed (frequency controlled): 25-70 m/min • Saw diameter: 648 mm • 648x5.7/3.5/6.8x160 Left • 648x5.7/3.5/6.8x160 Right • 648x5.7/3.5/x165 Plate • Shaft speed: 2500 rpm • Drive power per saw shaft: 110 kW • Weight (with motors): 18800 kg LINCK Turner DV 55, year 1996 • Feed speed: 36.2 m/min • Max. log diameter: 550 mm Gbedpjyyd Tnofx Am Esw LINCK Canter V30, year 1996 • Max. roundwood diameter: 500 mm • Min. roundwood diameter: 100 mm • Max. log length: 6 m • Min. log length: 3 m • Feed speed (30-80Hz): 25-70 m/min • Cutter head drive power: 90/132 kW • Number of knives: 2 • Cutting depth: 160 mm LINCK Milling unit VP34 • Min. timber length: 3 m • Max. timber length: 4900 mm • Max. milling depth: 50 mm • Max. cutting height: 120 mm • Min. board width: 60 mm • Feed speed (50Hz): 41.7 m/min LINCK Saws S2 VS 66 S • Min. timber length: 3 m • Cutting height with inner saw: 280 mm • Cutting height with outer saw: 280 mm • Feed speed: 36 m/min • Saw diameter: • 505x5.2/3.6/6.8x120 mm Left • 505x5.2/3.6/6.8x120 mm Right LINCK Multi-rip saw S3 VSV 80-A, year 1988 • Min. timber length: 2.50 m • Cutting height: 280 mm • Feed speed: 40 m/min • Saw diameter: • 510x5.2/3.6/6.8x120 mm Right • 510x5.2/3.6/x120 Plates LINCK Horizontal saw KH1, year 1985 • Min. timber length: 3 m • Min. cutting height: 60 mm • Max. cutting height: 140 mm • Max. cutting depth, right saw: 140 mm • Max. cutting depth, left saw: 140 mm • Min. cutting depth: 130 mm • Feed speed: 40 m/min • Saw diameter: 520x5.8/4.0x150 mm Lumber sorting: Lumber sorting by length, width and thickness 32 boxes for lumber Stacking and bundling system for lumber packs The offered line has a real capacity of approximately 70 000 m3 - 110 000 m3 per year in one-shift operation. Huge spare parts inventory. Sharpening room. We offer complete service from sale to installation and commissioning in the new location. For an additional fee, professional dismantling, loading and commissioning in the new location are possible.