Used Degreasing for sale (97)

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,000 mm, total length: 1,600 mm, total width: 1,600 mm, type of input current: three-phase, controller manufacturer: Union Dialog electronic control, compressed air connection: 6 bar, water pressure: 2 bar, Used 2018 Union MDMV 1 closed-circuit vacuum solvent degreaser, 50kg basket, Dialog control, Industrial Frigo chiller and 2 Safechem units. Manufacturer: Union Model: MDMV 1 Machine Type: Closed-circuit vacuum solvent metal degreasing / component cleaning machine Year: 2018 Condition: Excellent Includes: Industrial Frigo GR2A 30/Z industrial water chiller & 2 x SAFECHEM SAFE-TAINER chemical storage/handling units Codpsz Itlwjfx Aktjri Machine Description Used 2018 Union MDMV 1 industrial metal degreasing and component cleaning machine, designed for precision cleaning of small and complex metal components using super-stabilised perchloroethylene (PCE / PER / tetrachloroethylene). This is a closed-circuit hermetic vacuum solvent cleaning system incorporating washing, rinsing, vapour degreasing, solvent recovery/distillation and vacuum drying within an enclosed process. Technical Specifications Maximum Basket Capacity: 50 kg Solvent Type: Perchloroethylene / PCE / PER / Tetrachloroethylene – C₂Cl₄ Solvent Load: Approx. 397 kg / 248 litres Main Electrical Supply: 400 V / 3 Phase / 50 Hz Installed Power: Approx. 23 kW Rated Current: Approx. 46 A Steam Pressure Requirement: Approx. 4–5 bar Compressed Air Requirement: Approx. 6–8 bar Water Pressure Requirement: Approx. 2–3 bar Floor / Ground Loading: Approx. 549 kg/m² Control: Union Dialog electronic control This particular machine also has a substantial integrated solvent-management system incorporating working and recovery tanks, solvent pump, fine filtration, swarf filtration, still/distillation system, condenser, heat exchanger, separator, decanter, vacuum pump and active-carbon treatment. Continuous Solvent Recovery A particularly useful feature of the MDMV design is the continuous solvent distillation/recovery system. Union states that MDMV machines operate under vacuum for rapid washing cycles and use continuous vacuum distillation with automatic final stripping of residues, allowing contaminated solvent to be regenerated and reused during production. Industrial Frigo GR2A 30/Z Chiller Included The machine is supplied with a 2018 Industrial Frigo GR2A 30/Z air-cooled industrial water chiller. Refrigerant: R407C Refrigerant Charge: Approx. 5 kg Electrical Supply: 400 V / 3 Phase / 50 Hz Rated Current: Approx. 23 A Nominal Water Pressure: Approx. 3.2 bar Temperature Set-Point Range: -10°C to +25°C Weight: Approx. 390 kg The complete installation includes: 2018 Union MDMV 1 metal degreasing machine 50 kg maximum basket capacity Union Dialog control Closed-circuit solvent cleaning system Vacuum cleaning/drying system Rotating / oscillating basket system Spray cleaning capability Immersion cleaning capability Solvent vapour degreasing Integral solvent distillation and recovery Working solvent tank Recovered-solvent / waiting tank Solvent circulation pump Fine solvent filtration Swarf filtration Vacuum pump Condenser Heat exchanger Water / solvent separation Decanter Active-carbon vapour treatment system Floor safety / spill-containment tank 2018 Industrial Frigo GR2A 30/Z industrial chiller 2 x SAFECHEM SAFE-TAINER chemical handling/storage units Stainless steel containment trays Use and maintenance handbook Electrical documentation Please Note: All specifications, dimensions, capacities and descriptions are approximate and provided in good faith.

Condition: used, Bous Waschfix Cleaning and Degreasing System For sale is a professional, industrial parts cleaning system/washing machine of the "Waschfix" type. This system is ideally suited for workshops, production facilities, or metalworking companies for the thorough cleaning, degreasing, and maintenance of components and workpieces. The system is robustly built and features an external, high-quality pump and stainless steel filter unit for cleaning the washing medium, as well as a clear and intuitive control panel. The device cleans highly efficiently using a hot water spray process (up to +70 °C) with environmentally friendly, water-based cleaners (pH value 7–11). Thanks to the integrated two-hand safety operation and the clear control panel, operation is absolutely safe and straightforward. Codpfx Aoz Rm U Sektori Technical data: Manufacturer: Bous Type: Waschfix Manufacturing number: 18251 / 2001 Capacity (filling volume): 120 liters Permissible cleaning agent: pH value 7 – 11 (neutral to alkaline) Maximum operating temperature: 70 °C (thermostat controlled) Heating power (electric): 6 kW Required compressed air connection: 6 bar (for the blow-off function) Electrical connection: 230 / 400 V | 50 Hz Total power consumption: 16 A Net system weight: approx. 450 kg Special equipment: Includes a sturdy floor collection tray with skids (ideal for easy transport with a pallet truck or forklift). Scope of delivery: Main washing cabinet, control unit, separate pump and filter unit made of stainless steel, collection tray. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Bous 3-chamber spray cleaning system (direct degreasing) System: 3 separate washing chambers (ideal for washing/rinsing/drying in a single cycle) Chamber size (W x H x D): 500 x 300 x 1,000 mm (perfect for long, curved workpieces) Equipment: Integrated thermostat for precise bath temperature control Control: Siemens PLC with Siemens SIMATIC operator panel Crsdpezz H Iusfx Aktsi Machine has already been professionally disassembled and is ready for loading onto a pallet. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More new and used items can be found in our shop! International shipping costs available upon request!

Condition: used, Bous Waschfix Industrial Cleaning and Degreasing System This system is ideally suited for workshops, production facilities, mechanical engineering companies, or automotive repair shops for the automatic and thorough cleaning and degreasing of workpieces, machine parts, and tools. The device cleans highly efficiently using a hot water spray process (up to +70 °C) with environmentally friendly, water-based detergents (pH value 7–11). Thanks to the integrated two-hand safety control and the clear control panel, operation is absolutely safe and straightforward. • Integrated fine filter for a longer service life of the cleaning water and cleaner cleaning results. • Integrated drain pump for effortless emptying of the tank during maintenance. • Compressed air blow-out function for subsequent drying of the cleaned components. Technical data Manufacturer: BOUS Cleaning & Degreasing Systems Csdpfjz Nwbmox Aktori Type / Model: WASCHFIX Year of manufacture: 2006 Tank capacity: 100 liters Operating temperature: up to +70 °C Electrical heating power: 6 kW Compressed air connection: 6 bar (for blow-out function) Electrical connection: 230 / 400 V Total power consumption: 17 A Control voltage: 24 V DC / 50 Hz Net system weight: approx. 500 kg "Everything from a single source: We will gladly offer you suitable bank financing for your project." You can find more new and used items in our shop! International shipping costs upon request!

Condition: reconditioned (used), Year of construction: 2025, functionality: fully functional, total height: 4,000 mm, total length: 40,000 mm, total width: 6,000 mm, Equipment: documentation/manual, Automated nickel–chrome electroplating line for sale in Türkiye. The line was completely refurbished in 2025 and was operational before dismantling. All equipment is now dismantled and ready for loading. Codsz Ei Ngepfx Aktori The line has a reported coating surface area of 400–450 dm², a maximum rack load of 1,000 kg and a production capacity of 8,000 dm² per hour. Its installed footprint is 40 × 6 m (240 m²), with reported electricity consumption of 80 kWh per operating hour. The sale includes process tanks, filters, rectifiers, a hot-water boiler, a purified-water system and dosing pumps. The equipment list includes six 1,300 A nickel rectifiers, two 4,500 A chrome rectifiers and one 3,000 A rectifier for electrolytic degreasing. The buyer is responsible for transport and commissioning. A detailed equipment list and presentation are available upon request.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 02343, EVT GIGANT Vapor Degreasing System The system offered is ideally suited for the reliable removal of oils and oily residues from metal parts using the vapor degreasing process. Thanks to the generously sized work basket, high throughput rates are possible. Since this design does not include flooding of the work chamber, the required solvent volume remains relatively low, despite the large chamber size. This system is in good used condition and can be inspected and tested in our technical center in D-75447 Sternenfels by arrangement. Technical highlights: - The system recently underwent a comprehensive maintenance service by EVT. - The system was inspected for compliance with the German Federal Immission Control Act (BImSchV) by Chemlab as recently as March 2026. - The system was approved by DEKRA in July 2026. System features: - Closed system without exhaust air Codpfx Akozrw Dboteri - Top loading - Rotating and pivoting device - Spray device - Flooding device with heated feed tank - Vapor degreasing - Recirculating air drying - Activated carbon module (designed for 2-shift operation) - Atmospheric distillation - Solvents that can be used: Perchloroethylene (PER) - Basket dimensions L/W/H: 1100x450x370 mm (internal dimensions) or alternatively 6 x 480x320x200 mm (external dimensions) - Throughput: max. 2 batches/h - Compressed air: 6 bar System availability: from October 2026 P.S. This offer is non-binding and subject to change. Modifications, errors and prior sale expressly reserved.

Condition: used, Bous Waschfix WSA 70 T3 Cleaning and Degreasing System BOUS Cleaning & Degreasing System Waschfix WSA 70 T3 Usable space: 700 mm Filling volume: 180 l / 180 l Temperature °C Heating: 12 / 6 kW Extraction: 0.25 kW Csdepq N I Djpfx Aktsri Drying: 5 kW Compressed air: 6 bar Voltage: 230/400 V Control voltage: 24 DC Total power consumption: 54 A 400 V Year of manufacture: 2009 Special equipment: Fine filter Drainage pump Filter monitoring You can find more new and used items in our shop! International shipping costs available upon request!

Condition: used, Bous Waschfix T6/70 WSA Cleaning and Degreasing System BOUS Cleaning & Degreasing System Waschfix T6 / 70 WSA Crsdpfx Ajpuduxektei Usable space: 700 mm Filling volume: 280 l / 280 l degreasing system Temperature °C Heating: 18 / 12 kW Extraction: 0.56 kW Drying: 11 kW Compressed air: 6 bar Voltage: 230/400 V Control voltage: 24 DC Total power consumption: 84 A 400 V degreasing system Dimensions: approx. 210x200x260 cm Year of manufacture: 2014 Special equipment: Fine filter Drainage pump More items – new and used – can be found in our shop! International shipping costs on request!

Condition: like new (used), Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input frequency: 50 Hz, temperature: 60 °C, load capacity: 250 kg, SUMMA DC3/OSK rotating basket, rotating drum cleaning equipment, Carousel degreasing machine with dryer. The chamber rotary machine of the Czech manufacturer operates on the principle of pressure spraying. The degreasing machine offers three surface cleaning combinations. The machine is suitable for surface degreasing of a wide range of materials. Manufacturer: SUMMA DC3/OSK Codpfx Akewty H Detjri Year of manufacture: 2011 Max. workpiece size: 770x500mm Max. workpiece weight: 250kg Electr. Power: 23kw Bath temperature: Max. 60°C Air temperature: Max. 120°C Bath (rinsing) heating: 12/6kw Drying air heating: 13.5kw Aerosol pressure: 0.28Mpa Pump performance: 70 liters/minute Machine weight: 520kg Machine dimensions: 1800x1800mm Height: 1500mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Bous Waschfix 70/T3 WSA Cleaning and Degreasing System BOUS Cleaning & Degreasing System Waschfix 70/T3 WSA Special features: Fine filter Drainage pump Filter monitoring You can find more items – new and used – in our shop! Crsdpspudubofx Aktji International shipping costs available upon request!

Condition: used, Year of construction: 2001, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, compressed air connection: 6 bar, input current: 204 A, heating capacity: 90 kW (122.37 HP), power: 50 kW (67.98 HP), load capacity: 750 kg, Equipment: documentation/manual, We offer a cleaning and degreasing system, type VAIOCS S G, as a front-loading system (used system from 2002 – completely overhauled* + new cleaning chamber) for batch sizes with a maximum diameter of 1,500 mm and a maximum height of 600 mm, for use with modified alcohol (A III) or hydrocarbons (A III). * Vacuum pump new – all media-carrying pumps new – remaining pumps overhauled – Control cabinet, S7-300 control system, graphic display MP377 and safety technology upgraded to the latest standard – Crodpfx Ao Ahx Dtektji Pneumatics (Festo) serviced and partially new – pneumatic installation completely new – Electrical installation partially new – valve seals new – container insulation new – Refrigeration unit overhauled – Cleaning chamber, basket holder, swivel mechanism and door completely new Manufacturer: EMO Type: VAIOCS SG Order number: 515215 Year of manufacture: 2001 / 2016 Operating voltage: 400 V/N/PE Control voltage: 24 V DC Connected load: 140.0 kW Heating power: 90.0 kW Motor power: 50.0 kW Rated current: 204 A Solvent: Nikutex 2307 Filling volume: 5000 l If you have any questions or require further information, please feel free to send us a message or call us.

Year of construction: 2020, operating hours: 12,542 h, condition: used, 1. Continuous cleaning system, manufacturer: PERO AG, year of manufacture: 2020, mains connection: 400V, 50Hz, rated current 241A, system for cleaning various stamped parts, machine consists of various rinsing tanks, nozzles, and conveyor belts, various rinsing baths and nozzles for degreasing, and conveyor belts for transfer, 3 motors, manufacturer: Dietz, 1.7kW, 1 motor, manufacturer: Dietz, 1kW, 3 motors, manufacturer: Lowara, 3-3.28 kW, 1 motor, manufacturer: SEW, 0.37 kW, 2 motors, manufacturer: Elektror, 4 kW, 2 motors, manufacturer: Küenle, 0.55 kW, machine hours: 12,542, average utilization: 85%, last documented maintenance: 02/12/2025, system generally operational, follow-up work has been carried out. Codpfx Ako Aa Agbetori

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, MAJA SKINNY | Automatic skinning machine / strip defatting machine Manufacturer: MAJA-Maschinenfabrik Hermann Schill GmbH & Co. KG Model / Type: SKINNY Serial number: 43188 Year of manufacture: 2001 Power supply: 400 V, 50 Hz, 3~ (three-phase), 2.2 A Power: 0.75 kW Overall dimensions: 1200 x 800 x 1200 mm Codpfxjz S Rg Is Aktjri Length of conveyor belt: 3700 mm The MAJA SKINNY is a professional, automatic strip skinning machine from the renowned German manufacturer MAJA, designed for the quick and precise removal of skin and defatting of meat products (including pork, beef, and poultry). The device is widely used in meat processing plants, butcher shops, cutting rooms, and food processing facilities focused on continuous performance and high-quality finished products. The use of an automatic strip feeding system ensures a continuous flow of raw material, which significantly increases efficiency compared to manually operated devices and guarantees the highest level of operator safety. The cutting mechanism precisely separates the skin from the meat without excessive loss of valuable raw material, allowing for optimal processing profitability.

Condition: excellent (used), Year of construction: 2020, operating hours: 17,000 h, functionality: fully functional, machine/vehicle number: 863/2020, total height: 2,100 mm, inner dimension length: 530 mm, inner dimension width: 320 mm, inner dimension height: 200 mm, input voltage: 400 V, type of input current: AC, input frequency: 50 Hz, electrical fuse: 50 A, input current: 40 A, temperature: 70 °C, heating capacity: 6 kW (8.16 HP), load capacity: 40 kg, Equipment: documentation/manual, Höckh Multiclean Lean Concept III, including filling with new Safechem Dualene 1601 solvent. Everything is complete and ready for use and is sold as a complete package. The system offers options for immersion spraying, steam degreasing, and ultrasonic cleaning. Cjdey Sxn Dspfx Aktori Remote maintenance is prepared and only requires an internet connection. In addition to the system, the scope of delivery includes: - automatic basket feed - 3 cleaning baskets - chiller for system cooling - complete documentation The system can be inspected and tested before purchase. After the purchase, we will gladly assist with dismantling and loading, and can also provide a brief training session on machine operation and maintenance. The system is fully functional and in very good condition. We are selling this system because we now have a larger system in operation.

Condition: used, Year of construction: 2014, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 1, total height: 3,000 mm, total width: 3,000 mm, total length: 40,000 mm, overall weight: 40,000 kg, type of input current: three-phase, input voltage: 360 V, year of last overhaul: 2026, transport length: 12,000 mm, noise level: 70 dB, protection type (IP code): IP46, transport width: 2,500 mm, Equipment: documentation/manual, 21-STAGE LINE FOR PET BOTTLE RECYCLING, INCLUDING SORTING, WASHING, CLEANING, DEGREASING, LABEL REMOVAL, SHREDDING, AND DRYING. Cedpfx Akoz Sypljteri

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total length: 50,000 mm, We offer this Nordson automatic powder coating line, in very good condition, manufactured in 2016. It is fully operational, so you can visit it any day to see exactly how it works. It includes a degreasing area with an acid bath, followed by drying/preheating, painting, and polymerization. Codpfoz Dhk Hex Aktjri If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Year of construction: 2018, condition: good (used), functionality: fully functional, FOR SALE: KIGO CPT-1C-3S Chemical Pre-treatment & Spray Washing Chamber For sale is a high-quality, versatile industrial chemical spray washing chamber manufactured by KIGO in 2018 (Model CPT-1C-3S). Designed for cleaning, degreasing, and surface pre-treatment of metal parts prior to coating/painting. The system handles both lighter workpieces via an overhead conveyor and heavier parts via a floor wagon. Key Features & Capabilities: Codpfx Akjzz I Trstjri 3-Stage Treatment Process: Stage 1: Degreasing (heated spray, max 50 °C, 50 kW plate heat exchanger) Stage 2: First Rinsing (heated spray, max 50 °C, 50 kW plate heat exchanger) Stage 3: Second Rinsing (ambient temperature) Flexible Workpiece Dimensions: Lighter Parts (Overhead Track): Max dimensions: 2,500 x 1,200 x 2,000 mm (L x W x H) Max load capacity: 300 kg Heavier Parts (Floor Wagon): Max dimensions: 1,500 x 1,000 x 1,000 mm (L x W x H) Max load capacity: 1,500 kg Automatic Distribution Wagon: Positioned beneath the chamber floor to automatically direct runoff back to the correct tank, preventing liquid cross-contamination. Pneumatic Doors: Air-operated doors seal the chamber tightly during spray cycles. Heavy-Duty Construction: Tanks and floor made of AISI 304 L stainless steel. Structural frame built with epoxy-painted steel profiles and 50 mm polyurethane insulated panels. Technical Specifications: Manufacturer: KIGO O.E. Model: CPT-1C-3S (Serial Number: 0304-29-FL/PP) Year of Manufacture: 2018 External Dimensions: 7,348 x 3,758 x 4,334 mm (L x W x H) Internal Chamber Dimensions: 3,300 x 1,900 x 2,585 mm (L x W x H) Tank Capacity: 3 x 1,000 liters Pumps: Ebara centrifugal pumps (3 units, 5.5 kW) & Lowara pumps (2 units) Exhaust Fan: Stainless steel vapor extraction fan, 5,000 m³/h capacity (1.5 kW motor) Control System: Central electrical control panel with touch screen interface (ECP-PT07), adjustable spray/drip-off cycle times, automatic refilling, and level sensors. Condition & Documentation: Professional-grade industrial unit built for easy maintenance. Includes complete operation and maintenance manuals along with pneumatic/electrical schematics.

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, Complete industrial chrome and nickel plating installation, fully automatic, in perfect operational condition, including its own automated wastewater treatment plant, designed and scaled specifically for the line (with a treatment capacity of 12,000 liters per cycle), as well as a bath heating boiler with coil circuit. Cjdpfjy Sw Suex Aktsri The line was originally commissioned in 2000 and has been continuously refurbished, modernized, and maintained, with a notable conversion to trivalent chrome carried out in 2024, making it fully compliant with current environmental regulations. Total volume of process baths: 43,600 liters, distributed among nickel stripping, pickling and degreasing, nickel Watch, acid copper, semi-bright nickel, bright nickel, trivalent chrome, and trivalent chrome passivation.

Condition: new, Year of construction: 2026, MRS Cleaner – cleaning and degreasing concentrate MRS Cleaner is a professional alkaline concentrate for cleaning and degreasing parts, machines, equipment, vehicles and metal surfaces. Its low-foaming formula makes the product ideally suited for use in industrial, pressure and automatic washers, as well as equipment with heated cleaning solution. The product is designed for effective removal of grease, oils and other contaminants generated during the operation of machines, vehicles and equipment. MRS Cleaner contains corrosion inhibitors and is recommended, among other applications, for cleaning engines, components and metal parts. Alkaline concentrate for professional cleaning and degreasing MRS Cleaner has been developed for applications requiring effective and efficient industrial cleaning. The alkaline formula facilitates the removal of stubborn dirt, while its low-foaming properties allow convenient use in equipment designed for cleaning parts and components. The product can be used, among other applications, for: degreasing parts and metal components, cleaning engines and components, cleaning industrial machinery, cleaning agricultural equipment and machinery, cleaning road machinery, cleaning passenger cars and lorries, cleaning forklift trucks, cleaning tractors, cleaning conveyor belts, cleaning containers, cleaning tarpaulins, removing dirt from metal surfaces. Which washers can MRS Cleaner be used in? Crjdpfxozvayge Aktji The concentrate is intended for use, among other applications, in washers with a closed-loop working solution system. It can be used in: automatic washers, pressure washers, washers with heated working solution, equipment for industrial parts cleaning. The best cleaning results are achieved using an aqueous cleaning solution at a temperature of 40–80°C. Recommended concentration The working solution concentration should be adjusted to the type and degree of contamination, the sensitivity of the surface being cleaned and the selected cleaning method. Cleaning method Recommended concentration Immersion cleaning 5–10% Low-pressure cleaning 2–10% High-pressure cleaning 2–5% Concentrate pH value: 12.8 Recommended working solution temperature: 40–80°C 10% concentration – how much ready-to-use solution can you prepare? When preparing a 10% MRS Cleaner cleaning solution, 1L of concentrate can produce up to 10L of ready-to-use working solution. The high concentration of the product allows a large quantity of working solution to be prepared, making MRS Cleaner an economical solution for regular cleaning and degreasing of parts, machines and equipment. Key advantages of MRS Cleaner alkaline concentrate for cleaning and degreasing, low-foaming formula suitable for professional washers, contains corrosion inhibitors, concentrate pH value: 12.8, designed for cleaning parts and metal surfaces, recommended for cleaning engines and components, suitable for automatic and pressure washers, suitable for use in equipment with heated working solution, recommended operating temperature 40–80°C, wide range of applications in industry, automotive, agriculture and transport, at a 10% concentration, 1L of concentrate can be used to prepare up to 10L of ready-to-use working solution.

Condition: like new (used), Year of construction: 2014, operating hours: 100 h, functionality: fully functional, Equipment: documentation/manual, MAGIDO L160E – industrial parts washer | ALMOST UNUSED We offer for sale a professional industrial parts washer, the MAGIDO L160E, manufactured in Italy. The machine has been used very little, making it an attractive opportunity for a company looking for a high-performance machine without the need to invest in a new one. The MAGIDO L160E is designed for the automatic washing and degreasing of large, heavy, and bulky parts. The parts are placed in a rotating basket and are intensively sprayed with heated cleaning solution during the working cycle. Key parameters: • Load capacity up to 700 kg • Basket dimensions approximately 1,100 × 1,100 mm • Usable height approximately 800 mm • Tank volume 350 liters • Maximum temperature 90 °C • Power consumption 27 kW • Power supply 400 V + N / 50 Hz • Machine weight 950 kg • Year of manufacture 2014 • Italian manufacturer MAGIDO Group • CE marking Ideal for cleaning engine blocks, gearboxes, castings, machine components, production components, and other large or heavy parts, removing oil, grease, and operational dirt. The main advantage of this machine: Crsdpfez Ng Ensx Aktji Despite being manufactured in 2014, the washer has been used only minimally – practically unused. Therefore, it is an attractive opportunity to acquire a professional industrial machine with a high load capacity at a significantly lower price compared to a new machine. Price: €14,999 excluding VAT Personal inspection is possible. If you are seriously interested, we will gladly provide further photos, information, or a video of the machine. MAGIDO L160E – 700 kg load capacity, professional industrial design, and minimal use.

Condition: used, Year of construction: 2003, machine/vehicle number: 3945, functionality: fully functional, Retort Type Mesh Belt Furnace Typ: BLH with protective gas atmosphere Heat treatment line with protective atmosphere KOHNLE BLH-950-250/50-1800 Year of production: 2003 Serial number 3945 Hardening in a protective atmosphere, cooling in oil, washing and degreasing and tempering It consists of - Vibrator for charging - 300 kg capacity - Magnetic conveyor for filling the furnace - Tempering furnace - max working temperature 950 C 3 temperature control zones strip width 250 mm Capacity 30-50 kg/h Tunnel length 1800 mm Protective atmosphere Propane (possible change of gas for a protective atmosphere) - Oil quench with cooling oil, temperature 70C - Magnetic conveyor for extracting goods - Stand for washing and degreasing - vibrator for charging Annealing furnace - max temperature 500 C Control cabinet SIEMENS ALL ORIGINAL TECHNICAL DOCUMENTATION FROM THE MACHINE Installation dimensions 17 m x 2 m x 2.5 m Crjdpsyn Rgvsfx Aktei Dismantling and loading costs are charged additionally The price of the mentioned line is not fixed for serious enquiries

Condition: used, ITW Gema QCS 03 25-310 Complete Automatic Powder Coating Line, Powder coating system, Used machine Manufacturer / System: ITW Gema AG (Switzerland) & Recycolor Kft. Type / Model: GEMA QCS 03 25-310 (Powder coating booth) Year of manufacture: 2008 Serial Number: 5008-03012 (GEMA) / 16/2008 (Recycolor) Condition: Used, good industrial condition Dimensions and capacity: - Current layout footprint: 27 m x 18 m (system components can be reconfigured or modularly installed according to buyer needs) Credpfo Af I Hdex Aktoi - Maximum workpiece size: 2500 x 800 mm - Conveyor line speed: High-capacity, 2 m/min - Exhaust air volume (booth): 16,000 Nm³/h - Cyclone dust collector extraction capacity: 8000 m³/h - Permissible organic powder concentration: 25 g/Nm³ (certified powder), 10 g/Nm³ (uncertified powder) - Zone 22 Main system components and technical specifications: 1. Surface Pre-treatment Tunnel (Recycolor Kft.): - Continuous multi-zone degreasing, (phosphating), and rinsing system. - Final rinse zone: DI (demineralized) water rinse stage. - Construction: Watertight PP sheet housing with drip zones and partition plates to minimize cross-contamination. - Lower zone tanks equipped with internal filters, circulation pumps, and fitting assemblies. - Dehumidification / Exhaust: Fan extraction with droplet separator. - Control system: Fully automated PLC control. 2. ITW Gema QCS 03 25-310 Powder Coating Booth & Recovery System: - GEMA quick color-change booth with integrated overhead conveyor. - Double-sided automatic powder coating with 4+4 (total 8) spray guns with 2500 mm vertical stroke. - Pre-touch manual spraying area at the inlet for complex geometries. - Mono-cyclone powder recovery system and absolute filter with built-in exhaust fan. - Bottom cone with swing-out sieve unit for automatic or manual powder recycling. 3. Water Drying and Powder Curing Oven (Recycolor Kft.): - Fuel type: Natural gas - Main gas burner: Weishaupt WG30N/1-C/ZM-LN 3/4" W-MF (Max. output: 320 kW, supply pressure: 100 mbar) - Gas-infrared burners: INFRATEC / Honeywell CVI-r1 - VK4115V (24 units x 10 kW/unit = 240 kW total power, max. 50 mbar) - Air recirculation: 2x MA-62/1440 fans (2 x 15,000 m³/h flow rate, 2 x 7.5 kW motor power) - Design: Thermal-bridge-free sandwich panels with internal framework and "A-shape" thermal lock entry/exit to retain internal hot air. - Operating temperature range: Adjustable between 60 – 220 °C.

Year of construction: 2008, condition: used, functionality: fully functional, machine/vehicle number: 08021, The KMPN 100Z is an industrial, spray-immersion chamber washing machine with manual loading, manufactured by the Polish company EKO-PIL. It is a specialized device designed for degreasing and washing parts in industrial and painting processes. Washing machine dimensions [mm]: 1600x1100x1600 Credpfx Akoz Hylhetsi Basket dimensions [mm]: 615x430x280 Load weight: 70 kg Net/gross device weight: 700/1300 Washing temperature [°C]: 20-70 Washing tank capacity: 360 l Rinsing tank capacity: 210 l Gear motor: 0.12 kW Washing pump motor Rinsing pump motor Drying fan: 0.64 kW Cooling fan: 0.2 kW Installed power: 33 kW Drying heater power Washing liquid heater power Rinsing liquid heater power Air pressure: 6 bar Complete documentation included.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total length: 1,100 mm, total height: 1,805 mm, total width: 650 mm, pressure: 60 bar, type of input current: three-phase, empty load weight: 140 kg, input voltage: 400 V, fuel: electricity, heating capacity: 3 kW (4.08 HP), overall weight: 240 kg, water tank capacity: 100 l, temperature: 45 °C, input current: 16 A, The enclosed cabinet, made of stainless steel, delivers a high-pressure solution (up to 60 bars) for precise and optimal cleaning or degreasing of mechanical parts. This compact washing station operates in a closed-loop system, making it highly economical in terms of product usage and suitable for any maintenance workshop. STANDARD FEATURES: • Adjustable high-pressure washing pump, up to 60 bars • Foot pedal control • 60-micron filter • High-pressure spray gun • Compressed air blower inside the cabinet • Air blower for cleaning the window • LED lighting • Heating element controlled by an adjustable thermostat • Low-level control and safety cut-off • New gloves • Year: 2020 • Weight (kg): 140 • Dimensions (L x W x H mm): 1100 x 650 x 1805 • Work surface (mm): 850 x 650 • Payload (kg): 50 • Usable washing height (mm): 600 • Tank volume (L): 100 • Operating pressure (bar): 30 to 60 • Pump flow rate (l/min): 14 • Heating power (kW): 3 Cjdsz Tfbcepfx Aktjri • Electrical supply: 400V Three-phase – 16A • Pneumatic supply: 6 - 7 bars

Year of construction: 2013, condition: good (used), functionality: fully functional, machine/vehicle number: 00038-13, For sale is a professional parts cleaning system from the renowned manufacturer Krumm-tec, model RK 30. The cabin enables safe, clean, and ergonomic work during component cleaning and workpiece post-processing. Areas of application & uses: Additive manufacturing (3D printing): Efficient removal of resin and powder residues as well as support structures (SLA, SLS, Polyjet). Conventional mechanical engineering: Degreasing, cleaning, and dust removal of metal and plastic components. Suitable for the use of cleaning media such as water, cleaners, or solvents (e.g., IPA), depending on the model. Features & advantages: Closed, ergonomic housing with a large viewing window and integrated work gloves. Workpiece support made of robust grating. Integrated lighting and extraction/filtration system for safe operation inside the cabin. Crodjz H H T Sjpfx Aktei Clean media separation and easy maintenance. Technical data: Manufacturer: Krumm-tec Model: RK 30 Working area (W x D x H): approx. 680 x 350 x 598 mm Max. load capacity: approx. 40 kg Design: Compact table/cabin system