Used Rolling Hollow for sale (7,566)

Year of construction: 1998, condition: excellent (used), machine/vehicle number: ExCello Serial Number 3888, MICHIGAN Rotoflo Type 3237 Cold Forming Machine. Original Serial Number: 4590 ExCello Serial Number 3888 New 1975 rebuilt by ExCello late 1990’s Country of Origin: USA For the coldforming of profiles for serrations (straight or angular), Ihodpfxsfnk Ehs Ab Tew spiral teeth, oil grooves, threads and knurls. Capacity: Maximum slide stroke 1065 mm Maximum rack length 915 mm Maximum profile diameter 50 mm Maximum profile length 125 mm Standard module range 0.3 to 1.25 Motor size 15 kW Hydraulic tank capacity 1000 l Overall floorspace width of machine 5014 mm Width of machine 2768 mm Depth with outboard support 4165 mm Height 2000 mm Approximate weight of machine 11,700 kgs Complete with: Hydraulically operated outer support assembly to accommodate part length universal headstock, Universal rack holding feature.

Year of construction: 1983, condition: used, machine/vehicle number: 3604.1, Clamping surface for workpiece device: 230 x 500 mm Installation height between table and punch holder adjustable: 160 - 400 mm Projection to the center of the punch: 130 mm Stamp working stroke: 40 - 250 mm Punch pressing force max .: 40 kN Ihodpfx Abscxb Nms Tjw Stamp speed: 7.5 m / min max.working stroke: 2300 / h electr. Connection: 380 V, 1 kW Weight approx .: 620 kg Required space: 1030 x 850 x 2060 mm

Condition: ready for operation (used), sheet width 1540 mm plate thickness 5.00 mm pre-bending 4.25 - 6.00 mm diameter of upper rolls 150 mm voltage 400 V total power requirement 4.0 kW weight of the machine ca. 1630 kg range L-W-H 2520 x 890 x 1070 mm Features: - Robust electric three-roll bending machine - Drive via spur gear brake motor + reduction gear - Asymmetrical roll arrangement - Electric adjustment of the rear roll * with automatic/electric shut-off * Minimum/maximum travel adjustment possible Ihodpeyuzcbjfx Ab Tow - Rotating control panel - Swiveling upper roll - Conical bends by tilting the lower and rear rolls - 1x freely movable double foot switch * Right/left rotation of the rolls - Manual adjustment of the lower roll via handwheel - With analog position indicator - Electric safety device (cable) - Original operating instructions * Further technical data for steel 400 N/mm²: - 1.5 x upper roll diameter with bending .. 4.25 mm - 1.5 x upper roll diameter without bending .. 5.00 mm - 5 x upper roll diameter with Bending angle .. 6.00 mm

Year of construction: 2015, condition: good (used), Carl Wezel Cold Rolling Mill BW500/420 – Refurbished Strip Rolling Mill Carl Wezel Cold Rolling Mill BW500/420, refurbished strip rolling mill Manufacturer: Carl Wezel Maschinen- u. Werkzeugfabrik Model: BW500/420 Year of manufacture: 1975 Machine type: Cold rolling mill / Strip rolling mill Isdpfjyvgi Sjx Ab Tohw Modernisation: Bühler-Würz Kaltwalztechnik GmbH Type: Wezel rolling mill Year of modernisation: 2015 Operating voltage: 3AC 400 V Frequency: 50 Hz Total connected load: 25 kVA Total current: 36 A Control voltage: DC 24 V

Condition: ready for operation (used), total length: 9,000 mm, total width: 4,300 mm, total height: 3,050 mm, empty load weight: 190,000 kg, top side rolls hydraulicaly driven 110 HP on top roll Extra top roll included, dia 660 mm Hardened rolls treated with 50-NI-CR-No 7 Clamping force: 1000 ton Conical bending Electro mechanical control Max open between rolls: 205 mm Foundation needed: 10 500 x 5300 x 2400 mm Isdpfxeytyrlj Ab Tshw Number of rolls: 4 Roll capacity cold: 3100 x 125 mm Roll capacity warm: 3100 x 180 mm Type: hydraulic Roll dia upside: 850 mm Dia under roll - side rolls: 850 mm - 720 mm Driven rolls: 3 driven rolls Power needed: 230 HP total

Condition: good (used), Year of construction: 2008, 1 used profile ring rolling machine Make: Profiroll Bad Düben Model: URWA 250 Year of manufacture: 2008 Isdpfx Ajyurx Tjb Tohw Technical data: Control: SINUMERIK 840 D Rolling force: 800 kN Max. workpiece diameter: 250 mm Workpiece width: 80 mm Spindle diameter: 110 mm Spindle speed: 100–700 rpm Drive power: 110 kW Mandrel diameter: 45–100 mm Length: 2,600 mm Width: 2,600 mm Height: 2,600 mm Weight: 12.5 t Scope of delivery: Centralized lubrication Infinitely variable speeds Proportional measuring system Linear mandrel guide Mandrel run-out monitoring Process data management Rolling equipment: Feeder: 130–190 mm / W 46–80 mm Magazine: 130–190 mm Measuring head Separate cooling unit Electronic setup assistance Process visualization Ring stopper and turning device for rotating the rolled part

Condition: used, functionality: fully functional, actuation type: hydraulic, roller (top) diameter: 420 mm, sheet thickness (max.): 25 mm, Hydraulic cylinder Brand: Casanova Bending length: 3,100 mm Maximum bending thickness: 25 mm Top roller diameter: 420 mm The side rollers are raised parallel, without inclination. New control and command panel, installed and modified in 2003. Equipped with hydraulic flag and hydraulic side table. Ihjdpfx Absydk D Ho Tsw Pit dimensions: - 200x6800 mm - 555 mm depth

Year of construction: 2026, condition: new, functionality: fully functional, overall weight: 345 kg, total length: 660 mm, total width: 620 mm, total height: 1,700 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 04/2027, machine/vehicle number: 2026, Equipment: start-stop system, New New Bun Divider Rounder NEW NEW TOP fully automatic dough divider and rounding machine Daub Model: 4-30 "The Original" including 3 rounding plates Portion range: 40 to 130 grams/piece 30-division with stainless steel blades Simple operation of 10 programmes User-friendly easy clean position! Dough ring with Teflon coating and "easy click" system Reinforced pressing head Interchangeable blade head Capacity up to approx. 6,000 pieces/hour Machine is mobile DGUV V3 tested exclusively by us Connection: 400V, 16A-CEE plug Dimensions: 620 x 660 x 1700 mm (W x D x H) Brand new machine & SAB tested Comes with warranty + spare parts service Option: Leasing & rental service Ihsdpfx Abju Rzvgo Tsw Rounding plates Maintenance contract Service package Instruction & commissioning We have a large selection of bun divider rounders in stock!

Condition: good (used), functionality: fully functional, input voltage: 400 V, working width: 800 mm, total width: 1,400 mm, total length: 800 mm, total height: 1,695 mm, DGUV certified until: 04/2027, type of input current: three-phase, overall weight: 1,000 kg, conveyor belt width: 50 mm, Head machine, dough divider and rounder Ijdox N Hgcjpfx Ab Tehw König Rex Classic Weight range approx. 30 to 85 grams with discharge belt Connection: 400V, 16A-CEE plug Used machine Visit our large bakery machinery warehouse!

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, warranty duration: 3 months, DGUV certified until: 04/2027, type of input current: AC, total length: 440 mm, total width: 800 mm, total height: 470 mm, input frequency: 50 Hz, year of last overhaul: 2025, conveyor belt width: 160 mm, space requirement height: 470 mm, space requirement length: 440 mm, space requirement width: 800 mm, Slicing machine for small baked goods TOP Schneid - Leo with adjustable feed chute Tabletop unit made of stainless steel Capacity up to approx. 2,000 rolls Adjustable slicing height For slicing baked goods lengthwise Max product size: 160 x 80 mm (W x H) DGUV V3 safety tested exclusively by us Connection: 230V, ready to plug in Dimensions approx.: 800 x 440 x 470 mm (W x D x H) Ihedpfetpl Ukox Ab Tow Refurbished used machine, inspected by SAB With warranty + spare parts service Optional: Leasing & rental service Mobile table for LEO Maintenance contract Delivery service Training & commissioning Many more bakery machines in stock

Condition: used, functionality: fully functional, Year of construction: 2009, load capacity: 7,500 kg, construction height: 1,200 mm, empty load weight: 1,620 kg, Paper roll clamp Load centre of gravity: 650 Ihsdpfxou Dy Hks Ab Tew ISO class: ISO class 4 = 5,000 - 10,000 kg Condition: Ready for use and fully functional Technical condition: very good Description: Arm height: 1x 1290 mm 2x 515mm, opening width 420 / 1,300 mm, rotation range 360 endless Arm height: 1x 1290 mm 2x 515mm, opening width 420 / 1,300 mm, rotation range 360 endless

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 04/2027, type of input current: three-phase, year of last overhaul: 2026, Bun Divider Rounder Erika Record Automat Erika Record Automat, 30-part Divider head – NEWLY refurbished Stainless steel knives – NEW Includes 3 rounding plates Easy to clean DGUV V3 tested exclusively by us Ihsdpfjyurfmox Ab Tjw Connection: 400V, 16A-CEE plug Refurbished used machine Warranty + spare parts service Visit our extensive selection!

Condition: reconditioned (used), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 04/2027, type of input current: three-phase, year of last overhaul: 2026, Fortuna Bun Divider Rounder Semi-Automatic Ihsdpfxeyuncze Ab Tew Dough Divider and Rounding Machine Fortuna Bun Press Semi-automatic, 30-portion Dividing head NEWLY overhauled Stainless steel knives NEW DGUV V3 safety inspection – only with us Connection: 400V, 16A-CEE plug Dimensions: 580 x 580 x 1350 mm (W x D x H) Refurbished used machine Options: Stainless steel platform New rounding plate Service package Maintenance contract Training & commissioning Delivery service Visit our large showroom!

Condition: excellent (used), functionality: fully functional, input voltage: 400 V, total width: 2,180 mm, total length: 790 mm, total height: 1,700 mm, DGUV certified until: 04/2027, type of input current: three-phase, overall weight: 258 kg, conveyor belt width: 320 mm, year of last overhaul: 2024, Iris Gulliver 20 Special Roll Production Line For all specialty rolls, seeded rolls Iedpfx Abeyunchj Tjhw Simple and efficient production of all types of square dough pieces. Whether triangular, square, or rectangular, Swiveling display Easy, stepless adjustment of cutting length Infeed and outfeed belts foldable upwards Weight range: approx. 25 to 800 grams Output up to 7,000 pieces/hour DGUV V3 tested – only from us Connection: 400V, 16A-CEE plug Dimensions: 2180 x 790 x 1700 mm (LxWxH, working position) Used machine Visit our large showroom

Condition: excellent (used), Year of construction: 2014, Roller coater BÜRKLE easy coater RCL 12M and UV system easy cure UV - TRUV with 2 lamps and 2 x roller conveyor BÜRKLE easy coater RCL 1300: For one-sided application on flat surfaces from above Operating side left Touch screen control TP 177 Micro Rubberized application roller Hard chrome-plated metering roller can be sensitively adjusted via worm gearbox Controlled belt transport with exposed counter roller for safe workpiece transport Quick-change system with split bearing and cross-disc coupling for easy changing of the application roller Oscillating squeegee, can be changed quickly for cleaning Separate, infinitely variable FU direct drives for application roller, metering roller and transport Reversible dosing roller Motors and limit switches in Ex version on the machine Non-Ex control cabinet and control panel outside the danger zone on the machine Mobile version Electrical preparation for integrating the roller coating machine into a coating line Technical data Working width: 1300 mm Workpiece height 3 - 80 mm Min. workpiece length 400 mm Rubberized application roller DM 240 mm Chrome-plated metering roller DM 172 mm Transport speed 2 - 15 m/min variable Connected load approx. 2.4 kW Speed of metering roller 1.0 - 3.0 m/min Working height 900 mm (+/- 20) Safety equipment according to CE Incl. switch cabinet Weight approx. 1650 kg UV system e.a.s.y. cure UV - TRUV with 2 lamps One-sided curing of UV-curing lacquers on flat workpieces from above Ihsdpet Dx U Ssfx Ab Tjw Incl. control cabinet Working width max 1300 mm Workpiece height max 80 mm Number of lamps 2 # - changed 10/2023 UV lamp power 120 W/cm² each Speed 2 - 15 m/min variable Transport: Transport carpet Exhaust air connection 2 x 250 mm Connected load 39 kW Weight approx. 750 kg 2 x roller conveyor RB 1300 Working width 1300 mm length 4000 mm Speed 2 - 15 m/min variable Connected load 2 x 0.37 kW Total system length 12450 mm

Condition: new, Year of construction: 2024, neu 2024 9740 prompt, Zwischenverkauf v Türkei 6200 € 119.66 € 1 1050 mm 3 mm Ihsdpfxjwiqnwo Ab Tjw 90 mm 6 m/min 1.1 kW 1630 mm 700 mm 1200 mm 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN

Condition: ready for operation (used), Productielijn voor de fabricage van metalen rekken 14 stations: dubbel aangedreven Asdiameter 80 mm station lt;- station: 400 mm Verstelbare hartafstand assen: min. 100 mm; max. 280 mm Maximale invoerbreedte: 780 mm maximale dikte: 3 mm staal Inbegrepen: - Colombo excenterpers 100 ton voor ponsen Slag: 150 mm 16,5 pk Tafel: 600 x 1000 mm Slagen/min: instelbaar van 30 tot 90 slagen/min. - 4-koloms pers op rails die functioneert als vliegende schaar Tafel 400 x 400 mm - Lostafel Work mode: Roll forming unit Material thickness x width: W 780 mm Max Ihsdpjyru Hnjfx Ab Tew Numbre of sections: 14 stations axle Ø80mm PUNCHING MACHINE: Punching press CUTTING DEVICE: Flying Shear Conveyor: Yes

Condition: used, functionality: fully functional, Year of construction: 2008, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 1,100 mm, side roll diameter: 980 mm, roller diameter: 1,430 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 4,160 mm, sheet thickness (max.): 200 mm, sheet thickness steel (max.): 200 mm, overall weight: 225,000 kg, total length: 9,000 mm, total width: 5,580 mm, total height: 6,100 mm, power: 220 kW (299.12 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG3200 3 roll capacity 3100x200 mm year of make 2008 Capacity : Plate width mm. 3000 Rolling thickness mm. 200 Pre-bend thickness mm. 160 Iodpjyvgauofx Ab Tjhw -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Planetary design with pre-pinch fully hydraulic Rolls surface length mm. 3100 Top roll mm. 1100 Side rolls mm. 980 Electric power on hydraulic unit Hp 220 + Hp 180 Voltage 400 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. -Centralized operator panel with directional joysticks electric. -Digital position readout of the bending rolls. -Oil cooler automatic unit heat exchanger. -Emergency and safety installations, certified CE -User manuals and instruction books in English -Dimension 9000 x 5580 x H 6100 mm -Weight approx. 225 Ton.

Condition: good (used), functionality: fully functional, input voltage: 400 V, working width: 600 mm, total width: 1,750 mm, total length: 1,190 mm, total height: 2,000 mm, DGUV certified until: 04/2027, type of input current: three-phase, overall weight: 350 kg, conveyor belt width: 600 mm, year of last overhaul: 2022, WP Pallet Stamper ST.A + PM Pallet Stamper Werner & Pfleiderer Model: ST.A+PM Iodpfx Asytl I Sob Tshw with stamping trays 5 x 7 for Kaiser rolls Mobile stamper Connection: 400V, 16A-CEE plug Used machine Option: Maintenance contract Delivery service Instruction & commissioning We have many more bakery machines in stock!

Condition: good (used), functionality: fully functional, type of input current: AC, Pee-Wee Model P24US Hydraulic Thread Rolling Machine for in-feed or thru-feed rolling with helical thru-feed dies Max. rolling pressure: 24 tons Max rolling diameter: 75mm Min rolling diameter: 5mm Max rolling width: 200mm Iodpsxl Ebhefx Ab Tshw Diameter of rolling spindles: 69.85mm Max thread die diameter:210mm Variable spindle speeds: 20 -90 rpm

Condition: used, Year of construction: 2016, 2016 | Krampe SHL 20 | Used Roll Off-Tipper Truck 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 29900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* Ihodpfx Aex Ut U Deb Tsw 👷‍♂️ Inspected by an independent expert 16 inspection points 16 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Nice container lifter, all functions working. 269,397 km. Disc brakes. The saddle height of the semi-trailer is 1.20m. Unit deregistered January 17, 2024. TÜV has expired, DEKRA documents from the most recent inspection are available. The distance between the axles is 1.85m. Repair history: 2023 – Air spring replaced. 2022 – Brake pads replaced. 2022 – Control block coil replaced. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39582 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, maximum load weight: 14,560 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2024, next inspection (TÜV): 10/2026, total width: 2,550 mm, Year of construction: 2024, Equipment: ABS, MEILLER 2-axle container trailer for roll-off containers with external rollers First registration 10/2024 Unladen weight only 3,440 kg Payload 14,620 kg Loading height in driving position 1,065 mm Suitable for containers from 5,000 to 7,000 mm length (according to DIN 3072) Tyres: 8x 265/70 R 19.5 Bridgestone Wabco trailer EBS Wabco Smartboard including axle load indicator Emergency release device for spring-loaded cylinders SAF axles with disc brakes Air suspension with lift/lower function Aluminum air tank Full LED lighting 2x LED work lights Drawbar length 2,600 mm, 40 mm eye Height adjustment via tension spring and turnbuckle Iodpsytz Nxjfx Ab Tjhw 2 pneumatic locking devices in cross members Side lashing eyes for additional cargo securing RENTING is the new BUYING, also available immediately as a full-service rental

Year of construction: 2021, condition: new, New high quality ISITAN IRM 1550 x 140 Plate Bending Machine – powered sheet metal bending rolls 3 Rolls – other sizes and capacities in stock STANDARD FEATURES & SPECIFICATIONS Easy operation with mobile control panel with push buttons Conical bending device Very suitable for light and medium plates, aluminium or stainless steel Built according to EC Safety Directives and has CE Mark Manual Drop-End for easy removal of finished ferrule Hot rolled SAE 1050 (CK 45) Steel Rolls Ihjdpfx Ashpchyeb Tjw Main motor with Brake System Precision Bending with Brake Motor SAE 1050 Quality Certificated Steel Rolls with high tensile strength Two rolls powered by a single gearbox and gear system for top and bottom rolls Spheroid Cast Iron Main Frames Wire grooves at the end of the rolls Precision Bending with Brake Motor Model IRM 2550×140 produced standard with motorised back roll Specification on these 1550mm x 4mm powered bending rolls in the chart below: MODEL Usefull length mm Bending capacity mm Roll diameters Ø mm Roll speed m / min. (dk.) Motor power kw Wire grooves dia. mm Length mm Width mm Height mm Weight kg IRM 1050 x 110 1050 4 110 3 2.2 4 / 7 / 9 / 13 2200 750 1000 990 IRM 1050 x 130 1050 5 130 3.5 2.2 4 / 7 / 9 / 13 2200 750 1000 1200 IRM 1270 x 120 1270 4 120 3 2.2 4 / 7 / 9 / 13 2470 750 1000 1115 IRM 1270 x 140 1270 5 140 3.5 2.2 4 / 7 / 9 / 13 2470 750 1000 1350 IRM 1550 x 110 1550 3 110 3 2.2 4 / 7 / 9 / 13 2700 750 1000 1200 IRM 1550 x 140 1550 4 140 3.5 2.2 4 / 7 / 9 / 13 2700 750 1000 1420

Condition: used, functionality: fully functional, Year of construction: 1995, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 300 mm, roller (top) diameter: 300 mm, side roll diameter: 260 mm, roller diameter: 360 mm, roller length: 2,050 mm, working width: 2,000 mm, working height: 900 mm, sheet thickness (max.): 23 mm, sheet thickness steel (max.): 20 mm, overall weight: 10,000 kg, total length: 4,100 mm, total width: 1,750 mm, total height: 1,550 mm, power: 11 kW (14.96 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4-roll plate bending machine Imcar-Italy year 1995, model 4RH12/3 , capacity 2000 x18/23 mm TECHNICAL DATA: Capacity plate width 2000 mm Plate thickness max 23 mm Prebend 16 mm Upper roll 300 mm Lower roll 300 mm Surface useful on rolls 2050 mm Electric 380/50 motor 11 Kw on centralized hydraulic unit Ihodpfsyu N Rtsx Ab Tjw Weight 10 Ton Machine dimension 4100x 1750 x H 1550 mm Configuration: Hardened rolls very high surface resistance Conical bending attachment Digital position readout Hydraulic rolls power driven with planetary gear unit Hydraulic side rolls on linear guideways plate prebend Open front drop-end hydraulic to unload the closed shell Safety and emergency installed -----

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 4, roller (bottom) diameter: 380 mm, roller (top) diameter: 430 mm, side roll diameter: 300 mm, roller diameter: 480 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 1,420 mm, sheet thickness (max.): 35 mm, sheet thickness steel (max.): 35 mm, overall weight: 20,000 kg, total length: 5,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 20 kW (27.19 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 3, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, model capacity 3000x35 mm Digital readout Hydraulic 4 roll plate bending machine, used year 2017 plate thickness rolling 35 mm pre-bend 30 mm minimum rolling diameter ID 480 mm plate max width on the rollers 3100 mm top roll size 430 mm Power on hydraulic unit 20kW Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted Digital position readout Hydraulic rotation central rolls driven parallelism lifetime with torsion bar Pre-pinch load adjustable for pre-bending Drop-end top roll front open for unloading Re-rolling system for welded shells calibration. Safety and emergency stop Manuals and schematics – CE declaration of quality machine dimension 5500x2000x2100 mm weight 20ton --- Additional accessories installed with the machine See layout drawing in enclosed nr.1 central support hydraulic 4 ton capacity to support large shell dia up to 4,5 meters id nr.1 side support hydraulic left side 4 ton doble arm nr. 1 side support hydraulic right side 4 ton double arm Iodpeyu Nr Defx Ab Tshw