Used Rolling Mills for sale (15,660)

Condition: used, Year of construction: 2000, functionality: limited functionality, overall weight: 3,000 kg, total length: 1,500 mm, total width: 700 mm, total height: 600 mm, input voltage: 380 V, type of input current: three-phase, year of last overhaul: 2010, Joint Strip Oto Mills (strip splicer), equipment suitable for splicing strips at the entry of the rollformer accumulator. Nwjdpfjxmaa Iox Agzen

Condition: used, Tube forming mill OME 320x8mm (A3782) Tube forming mill OME 320x8mm (A3782) for tube production of 323mm maximum diameter and 8mm maximum wall thickness Make: Ome (Italy) Material: HR, CR, Galv Condition: New Tube Diameter: 168mm – 323mm Wall Thickness: 2mm – 8mm Direction: L-R Speed: 35 meters per minute FORMING MILL Pass N. 1 Driven Forming # 1 Pass N. 2 Driven Forming # 2 Pass N. 3 Driven Forming # 3 Pass N. 4 Driven Forming # 4 Pass N. 5 Driven Forming # 5 Pass N. 6 Driven Forming # 6 Pass N. 7 Side Idle Forming Pass N. 9 Driven Forming # 7 Pass N. 10 Side Idle Forming FIN-PASS SECTION, SINGLE POINT ADJUSTMENT Pass N. 11 Driven Fin Pass # 1 Pass N. 12 Side Idle Fin Pass Pass N. 13 Driven Fin Pass # 2 Pass N. 14 Side Idle Fin Pass Pass N. 15 Driven Fin Pass # 3 Pass N. 16 Driven Fin Pass # 4 SIZING SECTION Nwodsq Ul Rvopfx Agzen Pass N. 26 Driven Sizing # 1 Pass N. 27 Driven Sizing # 2 Pass N. 28 Driven Sizing # 3 NDT Prueftechnik Pass N. 29 Driven Sizing # 4 Pass N. 30 Driven Sizing # 5 STRAIGHTENING AND SQUARING SECTION Pass N. 31 Idle Turkshead #1 Roll holder plates NOT available Pass N. 32 Idle Turkshead #2 Roll holder plates NOT available Pass N. 33 Idle Turkshead #3 Roll holder plates NOT available Pass N. 34 Idle Turkshead #4 Roll holder plates NOT available Tables and tools for rolls change ABB Motors Costamasnaga Reducers Centralized lubrication system Hydraulic Power Unit Complete Mill Portion Automation with diagrams (OTO MILLS/Elletre 2013) Complete hydralic system Fume and Vapors exhaust system with extraction hoods (EUROFILTER) Complete Zinc exhaust system (DONALDSON)

Year of construction: 2018, condition: refurbished (used), Flying cutoff unit TCC 120/168, made by OTO MILLS Recently revamped Complete flying cutoff unit including: - Accelerator (carriage transmission) - Main carriage motor - Cutoff unit TCC120 with base with linear guides, cutting head, clamping unit and support for tube at exit side - Control panel RENEWED - Electrical cabinet RENEWED - Hydraulic group - Cable chain - All existing documentation, manuals, drawings Specifications: - Type of saw : Friction - Material thickness : 1 –6 mm - Standard tube length : 3 –12 m - Diameter range : 42 –168 mm - Square tubes : 40x40 –130x130 - Rectangular tube : 50x30 –180x80 Nwedpfxevtpp Nj Agzjn - Max. speed : 120 m/min - Length tolerance : +/-2 mm Round tube diameter: 42 – 168 mm Square tube diameter: 40×40 – 130×130 mm Rectangular tube diameter: 50×30 – 180×80 mm Material thickness: 1 – 6 mm Tube length: 3 – 12 m Type of saw: Friction Length tolerance: +/-2 mm Max. speed: 120 m/min

Condition: excellent (used), functionality: fully functional, sheet thickness steel (max.): 3 mm, sheet thickness (max.): 3 mm, outer diameter: 80 mm, HEAVY-DUTY HIGH-PERFORMANCE TUBE MILL OTO 80.3 QTC With complete Quick Tool Change System Made by OTO MILLS PRODUCTION RANGE • Diameter range 19mm – 80mm • Thickness 0.8mm to 3.2mm • Speed Max. 150 m/min • Working direction Left - Right Scope of supply: 1. Entry Line made OTO MILLS with: • Double Uncoiler OTOAD256 -PA • Double strip peeler for opening from top/bottom • Automatic strip joiner OTO GG254 • Floop vertical accumulator 2. OTO 80.3 QTC tube mill made OTO MILLS with: • Casted Iron stand • Bottom shaft height adjustable • Reinforced motor and gearboxes 2-speed transmission • Hydraulic nuts • Double length cooling tunnel • Motorised turk-head for fast adjustment 3. Quick change rafted system OTO QTC - 2nd set of cassettes off-line including : • 1 complete cassette for forming • 1 complete cassette for fin-pass • 1 complete cassette for sizing • Quick – plug automatic cardan connections 4. 150 m/min Flying saw – High Speed cold saw OTO TCCG160 with : • Carriage motion with 70kW motor • Cutting head motion with hydraulic control • AC Rotation of the blade 5. Automatic packer MAIR SQ.HEX.90.D.5.SL with emulsion draining and bundle weighting system • Possibility to make hexagonal and square/rectangular bundles • 5 modules for production of tubes 4-10m (12m for thickness >1.8mm) • Including emulsion draining, and weighting unit • 3 chains for finished bundle storage • Test tube zone, with cutting saw for the test tube 6. Automatic strapping unit SIGNODE M400 7. Zinc spraying METALISATION 250 • 1 metallisation cabin • 1 zinc spraying unit METALLISATION ENERGIZER 250 • 1 Zinc spraying gun ARCSRPAY 528E 8. Fume exhaust system • Fume exhaust conducts and exhaust covers on the required points a • Filter for fumes Nedpfx Agsvr Tntezewn 9. Complete set of rolls (*See details) NEW PARTS SUPPLIED IN 2023/2024: 10. Thermatool CFI 350-VF Solid state welder with : • Automatch • Selectable frequency 250-400kHz • Thermaview control panel 11. Cooler PARKER, Model hyprechill Maxi 12. Inner scarfing hydraulical Blissenbach, with all the toolding for ID 30-50m 13. OPTRONIC CNC control unit for driving flying saw (Switzerland) 14. New Emulsion plant with : • Pump and heat exchanger • Fillters • Electrical controls and monitoring 15. New motor and electritical cabinet for accumulator 16. New motor and control for sizing section

Year of construction: 2012, condition: refurbished (used), 6" TWIN TAC90 Double Cold Saw, made by OTO MILLS Year : 2012 / Revamping 2025 Nwodpsvtpnxefx Agzjn Tube range: - Rounds 48 – 170mm - Squares 50x50 – 150x150 - Rectangle 60x40 – 200x100 - Thickness range : 1.5 – 10,0 mm Speed : 90 m/min Scope of supply: - OTO MILLS TAC90 DF Twin Cold Saw - Electrical cabinet with ELTAV.5 CNC Positioning system - Operator control panel with HMI - Hydraulic group - First section of roller conveyor - Safety fences and protections Tube range: Rounds 48 – 170mm / Squares 50x50 – 150x150 / Rectangle 60x40 – 200x100 Thickness range: 1.5 – 10,0 mm Speed: 90 m/min

Condition: used, Tube Mill OTO 89.6 QTC with Quick Change System Working range: · Diameter: 26.9 - 89 mm · Thickness: 1.5 – 6.3 mm (except strip joiner up to 4,5mm and flying saw up to 5mm) · Length: 4 - 12 m Tube mill OTO 89.6 QTC | Year 2008 with : · Off-line strip preparation · Full automatic entry line (MTM) · OTO 89.6 Forming line (OTO MILLS) · OTO 89.6 QTC Quick change system (OTO MILLS) · 450 kW HF welder (EMMEDI) · Cold flying saw (SEUTHE) · Automatic 3" chamfering (MAIR) · Automatic packing (MAIR) · Automatic strapping (MAIR / SIGNODE) SUMMARY OF SCOPE OF SUPPLY 1. Automatic Entry Line with off-line strip preparation, including:  Double Uncoiler with off-line tale shear  Pinchroll and straigthener  Automatic strip joiner  Horizontal accumulator with rotating table 2. 89.6 Heavy-Duty tube mill with:  Cast steel stand structure.  18NiCrMo5 steel casehardened and ground shafts.  Independent Marking stand. Nwsdpfx Agov Dinmszon  95 mm diameter shafts with cylindrical fit and drive key.  Upper shaft vertically adjustable (single point manual adjustment).  Hydraulic compensator in forming stands  4 Breakdown stands with 140kW AC Motor / 3 forming stands with 100kW AC Motor  4 Sizing stands with 140kW AC Motor 3. Quick change system OTO 89.6 QTC 4. 450kW HF welder 5. Double scarfing unit with bead chopper & scrap conveyor 6. SEUTHE TS90 cold flying saw 7. Automatic MAIR FINISHING & PACKAGING LINE with:  NDT Tube testing line  3" Tube chamfering MAIR TFA.3/12.5  Automatic packer MAIR  Automatic Signode strapping unit Tube diameter: 26.9 - 89 mm Tube square: 30x30 - 70x70 Tube rectangular: 40x20 - 100x40 Tube thickness: 1.5 – 6.3 mm (except strip joiner up to 4,5mm and flying saw up to 5mm) Tube length: 4 - 12 m Working direction: Right to Left Speed: 120 m/min Entry line: MTM Tube Mill: OTO MILLS 89.6 QTC Flying saw: SEUTHE TS90 HF Welder: EMMEDI TFU450 Packing unit: MAIR .6.D.F & SIGNODE M400TSM

Year of construction: 1998, condition: excellent (used), machine/vehicle number: ExCello Serial Number 3888, MICHIGAN Rotoflo Type 3237 Cold Forming Machine. Original Serial Number: 4590 ExCello Serial Number 3888 New 1975 rebuilt by ExCello late 1990’s Country of Origin: USA For the coldforming of profiles for serrations (straight or angular), spiral teeth, oil grooves, threads and knurls. Capacity: Maximum slide stroke 1065 mm Maximum rack length 915 mm Maximum profile diameter 50 mm Maximum profile length 125 mm Standard module range 0.3 to 1.25 Motor size 15 kW Nwodefnk Ehopfx Agzen Hydraulic tank capacity 1000 l Overall floorspace width of machine 5014 mm Width of machine 2768 mm Depth with outboard support 4165 mm Height 2000 mm Approximate weight of machine 11,700 kgs Complete with: Hydraulically operated outer support assembly to accommodate part length universal headstock, Universal rack holding feature.

Condition: used, total height: 2,550 mm, total length: 4,800 mm, total width: 2,740 mm, Empty weight: 7.000 kg Price: On request - Documentation available: No - Control: Conventional - Spindle speed max.: 1000rpm - Model: terbank - Digital readout: Yes - Table width: 970mm Nedpfsxazypex Agzewn - Table length: 1140mm - Drilling capacity: 1mm - Travel X: 1500mm - Travel Y: 1500mm - Spindle diameter: 80mm - Travel Z: 1100mm - Type digital: Heidenhein - Number of axes: 3 - Spindle speed min.: 12rpm - Transport dimensions: 4800mm x 2740mm x 2550mm (l x w x h) - Transport weight [kg]: 7000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1994, machine/vehicle number: 6613, With this roll press, you can press different materials together in a single pass. Application example: Previously, sandwich panels were bonded and pressed with this machine. Technical data: Nwjdpfowc Skgjx Agzjn - Manufacturer: Bürkle - Type: AM - Year of manufacture: 1994 - Working width: 1,600 mm - Working height: 880 + - 20 mm - Part height 20 - 160 mm - Operating side left - Pressure cylinder from above, rubberised - Counterpressure cylinder from below, rubberised - Width of counterpressure cylinder 1,700 mm - Feed 3 m/min. - Total electrical connection - Volt/Hz 400/50 - Location in warehouse in Blomberg

Condition: like new (used), functionality: fully functional, Year of construction: 2008, Used electric roller from Schwartmanns Type: MSRW 02.1 Capacity: 1020 x 1 mm Electric L+R Year of manufacture: 2008 Nwjdpfxexqm H Nj Agzon

Condition: used, machine/vehicle number: 13277, Rotor diameter: 320 mm Rotor width: 440 mm Rotor knives: 3x2 Nwsdpfx Aoxqr T Usgzon Stator knives: 2 Infeed opening approx. 450 x 300 mm Drive motor: 11 kW

Condition: used, Capacity = 16,000 kg/h barley malt/hops Nedpfxoxqpglo Agzewn

Condition: good (used), functionality: fully functional, Asymmetric 3-roll bending machine Plate roll-flanging machine BOMBLED - Model: 317 S Year: 1971 Nsdpfoxn Tgwsx Agzewn Maximum rolling thickness: 4 mm Maximum working length: 2050 mm Maximum flanging thickness: 3 mm Roll diameter: 153 mm Control: motorized Motor: 3 kW / 4 HP Approximate weight: 2100 kg Dimensions: 3100x1100x1400 mm

Condition: used, total length: 5,250 mm, total width: 1,400 mm, total height: 1,600 mm, Empty weight: 6.000 kg - Documentation available: No - Serial number: 1011268 - Max. sheet thickness: 6mm - Top roll diameter: 220mm - Max. working width: 3040mm - Drive: raulisch - Number of rolls: 4 - Bottom roll diameter: 220mm - Control: Conventional - Motor power: 5.5kW - Transport dimensions: 5250mm x 1400mm x 1600mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information Nodpew Elvhefx Agzjwn VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: repair required (used), Year of construction: 1999, functionality: limited functionality, Type: Thread rolling machine Manufacturer: Thommen – Made in Switzerland Model: PR17-CNC / AC Year of manufacture: 1999 BOSCH control unit Nsdpfjwwwgvex Agzjwn - newly arrived - Comparable to Profiroll

Condition: used, Year of construction: 1988, Technical details: throat: 138 mm plate thickness: max. 1,12 mm infeed height: 1125 mm voltage: 380 V total power requirement: 0,25 kW weight of the machine ca.: 0,149 t dimensions L x W x H: 0,9 x 0,6 x 1,4 m Nsdpsu Icvisfx Agzown -application: bending of beads / flanging -shaft distance max./min.: 65 / 52mm manually adjustable via handwheel -currently beading tool Ø 8mm built in -stop plate 130mm adjustable operation at the control box and via foot switch The machine is mounted on a steel construction. *

Condition: used, machine/vehicle number: 13253, Rotor diameter: 800 mm Njdpfxoxqr T Ij Agzswn Rotor width: 1200 mm Rotor knives: 7 rows Stator knives: 3 rows Inlet cross-section approx. 1200 x 800 mm Drive motor: as per customer request

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller model: 4 axis with digital readout, number of rollers: 4, roller (top) diameter: 360 mm, side roll diameter: 320 mm, roller diameter: 400 mm, roller length: 3,050 mm, working width: 3,000 mm, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 26 mm, overall weight: 17,400 kg, total length: 5,500 mm, total width: 2,010 mm, total height: 1,900 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, 4RH17/5NC capacity 3000 x20 mm 4roll plate bending machine NC Imcar year 2016 Capacity plate width 3000 mm Plate thickness 20 mm Prebend 16 mm Central rolls 360 mm Side rolls 320 mm Surface useful on rolls 3050 mm Power supply 380/50 electric 25 Hp on centralized hydraulic unit Weight 17 Ton Dimension 5500x 2010 x H 1900 mm Configuration as shown on photo enclosed Hardened rolls very high surface resistance Conical bending attachment Digital readout NC programmable 4 axis Central support vertical motorized Roller table with hydraulic side arm Nedsxqyxljpfx Agzswn Safety and emergency installed per norms Hydraulic rolls power driven with planetary gear unit Hydraulic motion of rollers individual with dual initial pre-pinch Open front drop-end hydraulic to unload the closed shells

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, Sahinler round bending machine type IRM 2050x110 working width 2050 mm Nwedpjxnc N Ujfx Agzen max sheet thickness 3.0 mm roller diameter 110 mm motor driven

Condition: used, Price: On request Plate roller Sheet metal roller Model: Hydraulic Model: 4-Roller! Manufacturer: Chr. Haeusler (Switzerland) Nedpjww Iygsfx Agzewn Type: VRM HY L4000x6 Working width: 4100mm Max. sheetthickness: 6mm (Inox) - 14mm (Alu) Upper-roller: 350 mm Other rollers: 250 mm Incl. conical bending Incl. hydraulic retraction-assist Machine-weight: 23000kg Video's available before dismantling. - Documentation available: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: repair required (used), Year of construction: 2004, functionality: limited functionality, Type: Thread rolling machine – Gewinderollmaschine Manufacturer: Thommen – Made in Switzerland Nwedpfx Aswwwcksgzsn Model: RT 70 RCA Year of manufacture: 2004 Bosch control unit Comparable to Profiroll - Newly arrived -

Condition: repair required (used), functionality: not functional, Year of construction: 1977, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 435 mm, side roll diameter: 435 mm, roller diameter: 435 mm, roller length: 2,550 mm, working width: 2,500 mm, sheet thickness (max.): 40 mm, sheet thickness steel (max.): 40 mm, overall weight: 35,000 kg, total length: 8,000 mm, total width: 2,500 mm, total height: 2,720 mm, power: 40 kW (54.38 HP), input voltage: 380 V, Equipment: centralized greasing system, emergency stop, swiveling upper roller, 3roll plate bending machine 2500x40 mm Sertom -Italy Rollers length 2550 mm -Top roll 435 mm -Side rolls 435 mm Nwsdpfx Agexqq Iqezjn Capacity rolling -plate width 2500 mm -plate thickness 40 mm -pre-bend 35 mm We sell as is Machine need hydraulic repair DIMENSION 8000X2500XH2720 MM WEIGHT 35 ton POWER INSTALLED 50 Hp

Condition: used, Year of construction: 1988, total length: 4,600 mm, total width: 1,700 mm, total height: 1,480 mm, Empty weight: 7.500 kg Price: On request Nwsdpfx Agexqxtbszjn - Year: 1988 - Documentation available: No - Max. sheet thickness: 8mm - Max. working width: 3000mm - Drive: raulisch - Number of rolls: 3 - Transport dimensions: 4600mm x 1700mm x 1480mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2008, total length: 4,500 mm, total width: 1,700 mm, total height: 1,200 mm, Empty weight: 7.000 kg Price: On request Njdexdigfepfx Agzewn - Year: 2008 - Documentation available: No - CE marking present: Yes - Serial number: 20830013 - Max. sheet thickness: 16mm - Max. working width: 2000mm - Drive: raulisch - Number of rolls: 3 - Control: Teach-in - Motor power: 11.0kW - Transport dimensions: 4500mm x 1700mm x 1200mm (l x w x h) - Transport weight [kg]: 7000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Price: On request Drilling machine, horizontal boring machine  Model: Conventional Manufacturer: WMW Union Type: BFT 90/3-2 Nodswnhi Aspfx Agzewn Including rotating table Including digital readout Including multiple belongings X-Z travel: 1600x1000 Y-travel (up-down): 1050mm W-travel: 710mm Spindlemotor: 11kW Spindle diameter: 90mm Spindlespeed: 8-1600 rpm Table: 1000x1120mm Machine-weight: 9000kg - Documentation available: No - Serial number: 90/3-2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum