Used Profile Rolling Mill for sale (10,319)

Condition: new, The KPB 81, a robust Tube and Profile Rolling Machine, excels in high-performance bending, combining modern mechanical engineering with powerful hydraulics. This advanced machine allows you to bend medium and heavy steel profiles with remarkable precision, making it ideal for various applications in metal construction, locksmithing, and mechanical engineering. Equipped with three motor-driven rollers, hardened and ground shafts, and an overload slip-clutch, the KPB 81 ensures efficiency and safety. The modular roller system provides optimum adaptability for bending a wide range of profiles, while the hydraulically adjustable bending rollers enhance versatility, allowing for both horizontal and vertical machining. Standard equipment includes a digital display, control panel, and operator manual for intuitive operation. To experience the precision and performance of the KPB 81 in the Tube and Profile Rolling Machines category, you can request a quote today. Gtodjn Upglepfx Ag Tet

Condition: excellent (used), Year of construction: 1990, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 229, total width: 500 mm, total length: 600 mm, total height: 1,200 mm, number of straightening rollers: 5, Profile rolling machine: Rolling - Bending - Straightening / Profile dimensions as per attachment (see photo) Gsdjxrflmepfx Ag Tett

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Gtodpfx Agoh A S Hts Tjt Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Gtjdpfx Asuz If Neg Tst Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser power: 12,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Supports 12m steel pipe cutting Equipped with fully automatic combined loading and unloading system Gtsdew A H T Aspfx Ag Tot One-stop intelligent loading, cutting and unloading, increasing production efficiency by 200% Supports multiple processes such as beveling, locking, cutting, punching, opening welding holes, cutting bolt holes, marking and marking Laser power 12,000 W – 20,000 W X-axis travel 1,600 mm Y-axis travel 1,900 mm Z-axis travel 900 mm A-axis rotation ±90° C-axis rotation ±90° U-axis travel 30 mm V-axis travel 13,000 mm Positioning accuracy ±0.1 mm Max. workpiece section 1,000 × 400 mm Max. supported weight 5 T Supported profiles H-beam, channel steel, I-beam

Condition: excellent (used), Year of construction: 1994, Weinig 925 Rondomat profile knife grinder Stock code: 15443 Price: request for quotation $ Subcategory: Knife grinders Producer: Weinig Model: 925 Condition: used Tag number: 15443 Machine type: Grinding machines UMCC: G6775 Producer: Weinig Model: 925 Rondomat Year: 1992 Serial number: 925-438 Description: Weinig 925 Rondomat profile knife grinder We offer turnkey services with this machine. Printable page Get a quote General technical data Shaft length 9-1/2 inches Maximum tool diameter 9 inches Motor 1.5 HP, 220/440 V 8-7/8 Maximum wheel diameter Variable grinding wheel speeds: 1700, 2000, 2250, 2800 rpm Gjdpfxon Ut Slo Ag Tott Relief angle for back relief: 15 - 45 degrees Axial: 0 - 10 degrees Cooling liquid

Year of construction: 2023, condition: new, big Tube and profile laser cutting machine. up to diameter H profile till 12 meter tube or profile lenght Gjdpsmxl S Aofx Ag Tstt laser head depend on material thickness. offer by request. installation and training include.

Condition: used, machine/vehicle number: 007650, Max working width: 450 mm Gtedpou Evi Rjfx Ag Tet Max. machinable height: 120 mm Gluing System: EVA Hotmelt

Year of construction: 1998, condition: excellent (used), machine/vehicle number: ExCello Serial Number 3888, MICHIGAN Rotoflo Type 3237 Cold Forming Machine. Original Serial Number: 4590 ExCello Serial Number 3888 New 1975 rebuilt by ExCello late 1990’s Country of Origin: USA For the coldforming of profiles for serrations (straight or angular), spiral teeth, oil grooves, threads and knurls. Capacity: Maximum slide stroke 1065 mm Maximum rack length 915 mm Maximum profile diameter 50 mm Maximum profile length 125 mm Standard module range 0.3 to 1.25 Motor size 15 kW Hydraulic tank capacity 1000 l Gtedofnk Ehepfx Ag Tot Overall floorspace width of machine 5014 mm Width of machine 2768 mm Depth with outboard support 4165 mm Height 2000 mm Approximate weight of machine 11,700 kgs Complete with: Hydraulically operated outer support assembly to accommodate part length universal headstock, Universal rack holding feature.

Condition: used, Danley Onsrud, model WT-2-1284A, 460V, 3 phase profile machine, S/N 797387-01, with push button controls, winning bidder responsible for proper disassembly and removal, includes table with assorted components, and hydraulic unit with 3 phase electric motor and 35" width x 12" height x 24" depth tank and coolant unit, also includes (1) skid of assorted parts, no other info available, winning bidder responsible for proper disassembly and removal, and capping of all wires. Gtsdpexdddrefx Ag Tjt

Condition: used, Year of construction: 2003, total length: 3,230 mm, total width: 1,150 mm, total height: 1,120 mm, Empty weight: 1.400 kg Price: On request Gtjdpfxex Tuy Eo Ag Tjt - Year: 2003 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 220281 - Drive system: Conventional - Drive: Mechanical - Number of rolls [pcs.]: 3 - Number of driven rolls [pcs]: 3 - Power [kW]: 2.2 - Max. sheet thickness [mm]: 2 - Max. prebending thickness [mm]: 2 - Max. working width [mm]: 2050 - Top roll diameter [mm]: 110 - Bottom roll diameter [mm]: 110 - Bending speed [mm/min]: 3 - Transport dimensions: 3230mm x 1150mm x 1120mm (l x w x h) - Transport weight [kg]: 1400kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2011, For sale are two superbly maintained thread rolling machines from a German mechanical engineering company. The systems are fenced and both networked with KUKA automation (robot), but can of course also be operated as standalone machines. The complete photo collection is available upon request. Technical Data Designation: P15 CNC Thread Rolling Machine Manufacturer: PEE-WEE Inventory No.: P10.0014 Factory No.: P10.0014 Year of manufacture: 2010 Delivery date: (not filled in/not legible in the picture) Settings / Performance Rolling force, steplessly adjustable: 1,000 – 15,000 Feed rate, steplessly adjustable: 0.5 – 6 mm/s Rolling time, steplessly adjustable: 0.15 – 30 s Pause time, steplessly adjustable: 0.15 – 30 s Rolling Spindles / Tools / Geometry Spindle diameter: 54.0 mm Spindle mount length: 170 mm Width of keyway in spindle: 12.0 mm Height of key above spindle: 2.5 mm Min. distance between spindles: 130 mm Max. distance between spindles: 230 mm Stroke of spindle slide: 100 mm Max. tool diameter: *200 mm Min. tool diameter: *130 mm Machine bed height: 800 mm Spindle height above bed: 160 mm Support bearing height: 110 mm Spindle speeds: 20 – 80 rpm *Note from datasheet: 'Specified value may vary' (e.g. depending on fixture setup/workpiece diameter). Specifications / Workpiece Data Min. rollable workpiece diameter: *2 mm Max. rollable workpiece diameter: *50 mm Max. thread length plunge type: 170.0 mm Max. thread length through-feed: 2000 mm Gtedpfex Tnq Dox Ag Tjt Max. thread pitch: 4 mm Max. pitch for serrations: 1.5 mm Material strength (note): up to 70 kg/mm² (as per datasheet line) Installation Dimensions / Weight / Floor Load Footprint: approx. 1,500 × 1,200 mm Height: 2,800 mm Weight: 2,800 kg Ceiling/floor load: approx. 1,560 kg/m² Electrics / Supply Mains connection: three-phase supply Voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Total power consumption: 16 kW Motors (as per table) Rolling spindle drive motor Manufacturer: Weg Lenze Type: 3N132M-6 Power: 5.5 kW Speed: 860 rpm Voltage: 400 V, Frequency: 50 Hz Coolant pump with motor Manufacturer: Brinkmann Type: TB40/220+001 Power: 0.12 kW Speed: 2,700 rpm Voltage: 400 V, Frequency: 50 Hz Pressure pump motor Manufacturer: MEZ Type: 7AA132MM4 (legible as such) Power: 7.5 kW Speed: 1,455 rpm Voltage: 400 V, Frequency: 50 Hz

Condition: excellent (used), Year of construction: 2006, control type: NC control, number of rollers: 3, Small machine for extreme small Radius 1 set universal set rolls 1 set pipe rolls Digital readout position X-Axis Made in Swiss  Horizontal and vertical:Horizontal Shaft Ø: 40mm Number of rolls: 3 Horizontal: Yes Stroke X-Axis: 0 - 200mm Godjx Sx Nnepfx Ag Tstt Resistance moment: 500 NmCM³ Capacity flat: 70 x 12 x R 600mm Capacity Tube: 60 x R 600Ø x mm Capacity bar: 30 x 30 x R 300mm Capacity T-Profile: 60 x 60 x 7 x R 800mm Working speed: 0 - 18mm/min. Length: 1200mm Width: 820mm Height: 1200mm Weight: 490kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, machine/vehicle number: 007649, Max working width: 600 mm Gsdpju Eviqofx Ag Tstt Gluing System: EVA Hotmelt

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, number of rollers: 4, roller (top) diameter: 330 mm, side roll diameter: 240 mm, roller length: 2,600 mm, Akyapak 4 – Roll Initial Pinch Bending Rolls Year: 2012 Model: AHS 25/16 Godpfx Aexwzbzjg Tstt Capacity: 2600 x 20mm Rolling 2600 x 16mm Initial Pinch Programme control Top Roll: 330mm dia. Bottom Roll: 300m dia. Side Rolls: 240mm dia. Bending Speed: 0 – 3.5 metres / minute Motor: 11 kw Dimensions: 5385 x 1840 x 1611mm high Weight: 10 570 kgs

Condition: new, The KRM ST 20/6, a robust Plate Rolling Machine from KNUTH, is designed for exceptional performance in the category of 3-Roll Motor Plate Rollers. This heavy-duty machine is capable of bending workpieces up to 3000 mm in length, making it ideal for a variety of applications in metalworking, including steel and metal construction. With features like a solid, closed machine frame, a motorized rear roller, and an asymmetrical roll arrangement, the KRM ST 20/6 can handle even the heaviest plates with precision. The crowned and hardened rollers are suitable for processing stainless steel, while the machine boasts a motorized drive powered by a 4 kW electric motor. Control is simplified with a foot switch, and the emergency stop safety rope ensures safe operation. You can trust the central lubrication system for reliable maintenance and operation. For those looking for quality Plate Rolling Machines, the KRM ST 20/6 stands out as a solid investment. Request a quote today to enhance your sheet metal processing capabilities with this exceptional 3-Roll Motor Plate Roller. Gedsqagtiepfx Ag Tjtt

Condition: excellent (used), Catalogue number 7248 TECHNICAL DATA - max. workpiece height: 160 mm - spindle working length: 250 mm Gsdpfsrf Tahsx Ag Tett - spindle diameter: 40 mm - max. tool diameter: 220 mm - worktable (length/width): 420x1010 mm - motor: 11 kW - 2 pneumatic workpiece clamps - extraction port diameter: 180 mm - dimensions (L/W/H): 1500x1010x1560 mm - weight: 689 kg ADVANTAGES – German manufacture – Used milling machine, in very good condition Net price: 31,900 PLN Net price: 7,590 EUR depending on exchange rate of 4.2 EUR (Prices may change in case of significant exchange rate fluctuations)

Condition: new, functionality: fully functional, Year of construction: 2026, New three rolls angle roll Roundo R3 with tools, digital readout and remote control. Gedpjd N Ahdofx Ag Tett

Condition: used, Year of construction: 2009, Brand: PBT Indumasch Type: 25 PC 300 Steering system: PC-300 Year of construction: 2009 Torq each roll 1600 Nm Front roll 1000 mm adjustable Power 3 kW Roll height 300 mm Auflosung und positionierung X-Achse 1/100 mm New SIEMENS TOUCH PANEL Specifications Metric US Standard Horizontal and vertical Horizontal Axis Ø 105 mm Number of rollers 3 Stroke X-axis 265 mm Capacity flat 120 x 15 x R = 2000 mm Capacity tube 114 x R = 2000 mm Ø x mm Capacity solid 60 x 60 x R = 1000 mm Dimensions (Estimate) Length 1500 mm Width 1200 mm Height 1500 mm Weight 1350 kg Gedpou R Rvcefx Ag Tett Important: The information on this page has been obtained to the best of our ability and belief and where necessary obtained from the manufacturers.b Accuracy cannot be guaranteed but the information is given in good faith. Accordingly, it does not constitute a representation or contractual terms. We encourage you to check all essential details!

Condition: good (used), Ring bending machine, profile bending machine, three-roll bending machine, bending machine -Outer diameter: 200 mm -for: 35 mm pipe -Bearing seat: Ø 55 mm -Bore: Ø 49 mm -Quantity: 2 rolls available Gsdpfjd Naw Asx Ag Tstt Price: complete -Dimensions: Ø 200 x 81 mm -Weight: 11 kg

Condition: new, The KRM ST 30/5, a robust Plate Rolling Machine from KNUTH, is designed for exceptional performance in the category of 3-Roll Motor Plate Rollers. This heavy-duty machine is capable of bending workpieces up to 3000 mm in length, making it ideal for a variety of applications in metalworking, steel, and metal construction. With features like a solid, closed machine frame, a motorized rear roller, and hardened rollers, it provides reliable and precise results. The asymmetrical roll arrangement accommodates heavy plates, and its conical bending capabilities are enhanced by an adjustable rear roller. Moreover, it includes a user-friendly separate control panel with a foot switch for easy operation. Maintenance is simplified through central lubrication, ensuring long-lasting functionality. You can take advantage of the KRM ST 30/5 for your plate rolling needs; request a quote now and enhance your sheet metal processing capabilities. Gtodpsihvtgsfx Ag Tst

Condition: excellent (used), Year of construction: 2008, feed length X-axis: 5,500 mm, feed length Y-axis: 650 mm, feed length Z-axis: 750 mm, feed rate X-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, table length: 5,500 mm, table width: 750 mm, Profile grinder MAEGERLE - MGC-L 560 Surface, Profile grinding machine 5600 mm CNC gear rack grinding machine Automatic grinding head B-Axis Grinding head ca 20 gr swivel ARO - KKS coolant tank 8000 L ( size 4400 x 1900 x 2200) Pendel opperation ( double table) Dresser automatic Table dresser X - Travel: 5500mm Y - Travel: 650mm Z - Travel: 750mm Table Length: 5500mm Table Width: 750mm Feed rate X-Axis: 20000mm/min. Feed rate Z-Axis: 20000mm/min. Grinding stone dimensions:600 x 300mm Power: 115kW Speeds: 8000Rpm Gedpfsx Swqwex Ag Tett Cooling system: Yes Feed rate Y-Axis: 20000mm/min. Length: 10700mm Width: 4700mm Height: 3800mm Weight: 42000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -HOMAG finishing unit allows you to smooth the milled edges for optimal appearance of the edge overhang Gedpfob Sc Stex Ag Tett -with scanning of 2 sides each -scraping blade from above and below -Quantity: 1 piece available -Dimensions: 500/450/H650 mm -Weight: 60 kg

Condition: good (used), Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine -Manufacturer: EWM, flat jaw thread rolling machine knurling machine -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm Gsdpei Eg Nkefx Ag Tstt -Weight: 1308 kg

Condition: excellent (used), Large slewing bearings, slewing ring, single-row ball slewing ring, four-point bearing -comes from: HUSS Rides, manufacturer of leisure facilities Gtodocgf R Djpfx Ag Tot -Replacement part: from Top Junior 70011-15 -Manufacturer: Rothe Erde -Type: 2 -Type: 2.060.40.0490.001 63132.609 -Outer diameter: 625 mm -Inner diameter: 354 mm -Height: 90 mm -Quantity: 3x available in storage -Price: per piece -Weight: 122 kg