Used Profile Knives for sale (7,029)

Condition: used, machine/vehicle number: 007649, Max working width: 600 mm Tjdpfx Asu Eviqofgjd Gluing System: EVA Hotmelt

Condition: like new (used), functionality: fully functional, Year of construction: 2010, The line is from 2010. Modernization is being done in 2020. ZEMAN CZS LINE SPECIFICATIONS. ZEMAN's flagship product, the fully automated "PURLIN" line, is used to produce open, cold-formed sections such as C, Z, and SIGMA, in various widths and shapes, thanks to fully automatic adjustment of the profiling rollers. Coils up to 750 mm wide and 1.25 mm to 3 mm thick sheet metal in grade S-390 and lower can be used as raw material. The machine is designed to produce components up to 15 m long. The width of the specially hardened profiling rollers is infinitely adjustable, using only dedicated software. A fully integrated "flying punching" device creates all types of mounting holes, and the entire process is continuous, meaning the material does not stop for individual operations such as punching holes or cross-cutting. To maintain production efficiency, the line speed is dynamically optimized. The machine decelerates and accelerates automatically without operator intervention. A coil uncoiler with a maximum working load of 15 tons is mounted on a mobile trolley, enabling precise centering of the material strip before feeding it into the straightener. The straightener, along with a crescent straightening system, allows for straightening the material, ensuring the required sheet flatness and reducing the crescent on the feed belt. 2. Punching Section This section contains 5 double, "flying" punching portals, which can be equipped with 20 small (up to 40 mm) or 10 large (up to 100 mm) tools (punches and dies) for punching mounting holes. A combination of these tools can also be used. 3. Pre-cutting Shear A "flying" shear used to make preliminary holes for the cutting shear. This process is designed to maintain material continuity, resulting in a more precise profile shape, especially at its beginning and end. This is an adaptive guillotine that adjusts the width of the hole being cut to the width of the sheet metal strip. 4. Guide Carriage/SIGMA Modules The guide carriage is used to center the sheet metal strip before entering the profiler. It is interchangeable with the module for producing Sigma-shaped profiles. To produce S+ profiles, the guide table should be removed and two Sigma modules inserted. These modules position fully automatically and independently, left and right. 6. Rotary Cut-Off Guillotine. The rotary cut-off guillotine with hook knives is used to finally cut the profile from the material strip Todpfx Afeymampsged using the holes made by the pre-cutting guillotine. This is a "flying" guillotine, so the sheet metal does not stop during the cutting process. Depending on the profile being produced, a properly oriented cutting cassette should be attached. 7. Receiving Table The receiving table is used to automatically discharge the completed profiles from the roller conveyor. The elements are then manually arranged into a package. The design allows for easy bundling of the package. The table is designed to accept 15-meter profiles and allows for access by a forklift or overhead crane to collect the package of profiles.

Condition: used, Weinig Rondamat 929 knife grinding machine for the manufacture of profiled knives. Production from a straight blank or regrinding of used knives using a template. Technical data: - Maximum grinding wheel diameter: 225 mm - Maximum tool diameter: 300 mm Tjdpfx Afjzrx Hqogsd - Minimum tool diameter: 80 mm - Maximum tool width: 230 mm

Condition: good (used), functionality: fully functional, Year of construction: 1990, machine/vehicle number: 325100, number of rollers: 3, shaft diameter: 100 mm, pipe diameter (max.): 120 mm, overall weight: 3,000 kg, Equipment: documentation/manual, emergency stop, I am offering for sale a profile bending machine, purchased new in 1990, manufactured by COMAC, type 3025 HV, with standard configuration including vertically arranged bending axes. It is in fully operational condition and can be demonstrated under power after prior arrangement. - Control panel on the swivel arm with joysticks and switches - Digital displays for the two side rollers Maintenance & Condition: The machine is in excellent condition. In 2023 and 2025, it underwent extensive repair and overhaul work at a specialized workshop. The total investment volume for both measures amounted to approximately €50,000 net. Documentation & Evidence: The entire maintenance history is completely documented. Detailed evidence of the individual items, as well as all original invoices, is available and can be provided upon request. Original manual available. Enormous added value: Extensive tool and profile package included! To be able to serve customer orders in an even more flexible and individualized manner, significant investments were made in expanding the tool range. In addition to the standard tools, you will receive: a seven-page detailed list of all tools, including photos. • Tools for various round tubes Ø (57 + 60.3 + 70 + 76.1 steel + 76.1 plastic, + 80 + 88.9 + 101.6 + 108 + 114.3 + 120) mm. • Special tool for flat profiles, light axis up to a height of 500 mm. • Tools for square and rectangular tubes. Tsdpfx Afe Af Utasgsd • Tools for angle iron • Tools for special profiles Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The disassembly, loading and collection must be organized and carried out by the buyer himself or by a forwarding agent commissioned by him. Technical specifications according to available documentation. Subject to prior sale. If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2004, Weinig Rondamat 960 profile grinder Specification as follows Weinig Rondamat 960 standard arbor 50mm Tsdpez Ezm Dofx Afgsd High pecision knife grinder for sharpening straight knives and profiling using a template. Sharpening straight knives in the cutter block. Manual grinding machine for profile and straight grinding. Grinding wheel diameter min./max.: 150 mm / 225 mm Grinding wheel width: Ceramic 5 mm, Borazone 10 mm Grinding wheel bore: 60 mm Tooling circle min./max.: 100 mm / 300 mm Tool width max.: 240 mm Grinding wheel drive: 1,1 kW Spindle rpm: 1700 / 2000 / 2400 / 3000 U/min Free angle: Radial: (at the back) 10 - 30 degrees, Axial: 0 - 20 degrees For swivel heads up to 60 degrees Coolant tank approx. 50 litres Table feed 0 - 240 mm Electrical connection approx. 2 kW Pneumatic connection value 5 bar Operating voltage 380 V / 50 Hz Full documentation. COMFORT PACKAGE option Variable grinding wheel speed 1500 to 3000rpm Lamp Back clearance angle is motorised Grinding wheel advance is motorised Setting of the side clearance angle is pneumatic Hydraulic grinding wheel clamping. With diamond grinding wheels included. Without grinding wheel dressing unit.

Condition: ready for operation (used), Year of construction: 1984, machine/vehicle number: No.317, No.327, functionality: limited functionality, operating hours: 40,000 h, overall weight: 3,700 kg, Equipment: documentation/manual, For sale are 2 (two) sets of optical profile grinding machines Wasino type GLS-130AS, with Fanuc control, made in Japan in 1984. 1 machine is working condition, there are videos of spindle runout and positioning X,Y accuracy measurements. Second machine serial No.327 is the same complete condition, just factory worker could not start it up for us, was worked more then 1 year ago. There are accessories, tools and technical documentation for each machine. For 1 machine Wasino complete with accesories and tools, price is 18500 euro EXW stock. Preferable to sell as package 2 machines together. Tjde Afb Eyjpfx Afgjd

Condition: new, Year of construction: 2026, power: 45 kW (61.18 HP), Knife Granulator PC42100R – 45 kW – NEW GrabTrade has specialized in the sale of machinery and complete technological solutions for the recycling industry for many years. We are the official representative of 3E Machinery in Poland. We offer new and used shredders, knife granulators, and complete recycling systems. We offer a new industrial knife granulator, 3E Machinery PC42100R, equipped with a powerful 45 kW main motor and a 1,000 mm wide rotor. The PC42100R is designed for efficient size reduction and granulation of various types of plastic and other recyclable materials. Its robust construction and specially designed cutting system ensure high efficiency, stable operation, and a uniform final fraction. TECHNICAL SPECIFICATIONS: Tedpfx Afsznbv Hjgod Model: PC42100R Type: Industrial knife granulator / cutting mill Main motor power: 45 kW Rotor length: 1,000 mm Rotor diameter: 420 mm Cutting chamber: 1,034 × 540 mm Moving knives – V arrangement: 3 × 2 / 5 × 2 pcs. Moving knives – S arrangement: 3 × 10 / 5 × 10 pcs. Fixed knives: 2 × 2 pcs. Standard screen perforation: 12 mm Machine dimensions (L × W × H): 1,770 × 1,842 × 2,425 mm Machine weight: approx. 3,230 kg Condition: Brand new The PC42100R is also available in a 55 kW motor version, depending on the customer's requirements and processed material. APPLICATIONS: The PC42100R knife granulator is suitable for processing various recyclable materials, including: PP, PE, HDPE, and LDPE plastics, plastic lumps and purgings, injection molding waste, plastic pipes and profiles, plastic crates and containers, sheets and technical plastics, pre-shredded cable waste, various production and industrial plastic waste. The machine can operate as an independent granulator or as part of a complete recycling line. For larger or bulkier materials, we recommend combining the PC42100R with a single-shaft shredder with a hydraulic pusher, which performs the first shredding stage. The pre-shredded material is then transferred to the PC42100R for final granulation. GrabTrade offers complete systems consisting of a pre-shredder, knife granulator, material transport system, and Big-Bag collection station. MAIN ADVANTAGES: Powerful 45 kW drive Heavy-duty industrial construction 1,000 mm wide cutting rotor Large 1,034 × 540 mm cutting chamber Efficient V-type cutting system Replaceable screen for controlling the final material fraction Suitable for continuous industrial operation Can be integrated with shredders and complete recycling lines Possibility of pneumatic material transport to a Big-Bag station Professional technical support and spare parts availability Machine available in our offer. We provide professional technical advice, commissioning, after-sales service, and full access to spare and wear parts, including knives and screens. Full range of our knife granulators, shredders, and complete recycling systems: GrabTrade – shredding and recycling machines.

Condition: new, Year of construction: 2026, Knife Granulator PC42100R – 45 kW – NEW GrabTrade has been specializing in the sale of machinery and complete technological solutions for the recycling industry for many years. We are the official representative of 3E Machinery in Poland. We offer new and used shredders, knife granulators and complete recycling systems. We offer a new industrial knife granulator 3E Machinery PC42100R, equipped with a powerful 45 kW main motor and a 1,000 mm wide rotor. The PC42100R is designed for efficient size reduction and granulation of various types of plastic and other recyclable materials. Its robust construction and specially designed cutting system ensure high efficiency, stable operation and a uniform final fraction. TECHNICAL SPECIFICATIONS: Model: PC42100R Tedpfx Ajicz Drofged Type: Industrial knife granulator / cutting mill Main motor power: 45 kW Rotor length: 1,000 mm Rotor diameter: 420 mm Cutting chamber: 1,034 × 540 mm Moving knives – V arrangement: 3 × 2 / 5 × 2 pcs. Moving knives – S arrangement: 3 × 10 / 5 × 10 pcs. Fixed knives: 2 × 2 pcs. Standard screen perforation: 12 mm Machine dimensions (L × W × H): 1,770 × 1,842 × 2,425 mm Machine weight: approx. 3,230 kg Condition: Brand new The PC42100R is also available in a 55 kW motor version, depending on the customer's requirements and processed material. APPLICATIONS: The PC42100R knife granulator is suitable for processing various recyclable materials, including: PP, PE, HDPE and LDPE plastics, plastic lumps and purgings, injection moulding waste, plastic pipes and profiles, plastic crates and containers, sheets and technical plastics, pre-shredded cable waste, various production and industrial plastic waste. The machine can operate as an independent granulator or as part of a complete recycling line. For larger or bulky materials, we recommend combining the PC42100R with a single-shaft shredder with hydraulic pusher, which performs the first shredding stage. The pre-shredded material is then transferred to the PC42100R for final granulation. GrabTrade offers complete systems consisting of a pre-shredder, knife granulator, material transport system and Big-Bag collection station. MAIN ADVANTAGES: Powerful 45 kW drive Heavy-duty industrial construction 1,000 mm wide cutting rotor Large 1,034 × 540 mm cutting chamber Efficient V-type cutting system Replaceable screen for controlling the final material fraction Suitable for continuous industrial operation Can be integrated with shredders and complete recycling lines Possibility of pneumatic material transport to a Big-Bag station Professional technical support and spare parts availability Machine available in our offer. We provide professional technical advice, commissioning, after-sales service and full access to spare and wear parts, including knives and screens. Full range of our knife granulators, shredders and complete recycling systems: GrabTrade – shredding and recycling machines.

Condition: like new (used), functionality: fully functional, Year of construction: 2021, operating hours: 100 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: Schneider, shaft diameter: 50 mm, bending force (max.): 10 t, overall weight: 2,200 kg, total length: 2,670 mm, total width: 1,650 mm, total height: 1,400 mm, input voltage: 380 V, input current: 24 A, type of input current: three-phase, Equipment: CE marking, documentation/manual, For sale: an INDUCTAFLEX AL-1e 4-roller CNC profile bending machine, purchased in 2021. It has been used very little and has only been switched on for a total of 100 hours over the years. It comes with a complete set of rollers, including a separate holder. INDUCTAFLEX AL-1e 4-roller CNC tube bender + tool set - Purchased in 2021 - CNC-controlled, 4-roller bending machine for aluminium profiles and tubes - Bending force: 10 t - Repeat positioning accuracy: 0.05 mm - Torque per roller: max. 2,500 Nm - Shaft diameter: 50 mm - X-axis stroke: 200 mm - Dimensions: 1,650 × 2,670 × 1,400 mm - Weight: approx. 2,200 kg Tedpfx Ao Afb Afjfgsd - Includes a tablet for training purposes - Tool set with holder - Located in Budapest, Hungary

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, working width: 205 mm, working height: 60 mm, Spraying machine for profiles / Automatic spraying machine for moldings Manufacturer: Falcioni Type: Flexispray Year of manufacture: 2005 Linear continuous spraying machine for the automatic coating of profile moldings, frame moldings, profile boards, and baseboards, with a spray booth, belt conveyor, and programmable gun control. Typical applications: Molding production, frame and picture frame manufacturing, profile wood and panel production, contract coating. Intended coating materials according to the manufacturer: - UV stains and water-based stains - Water-based paints applied by spraying - UV paints Workpiece dimensions: Max. working width 205 mm Max. workpiece height 60 mm Minimum workpiece length 400 – 800 mm Tedps Adrrzjfx Afged Feed: Feed speed 20 – 120 m/min Conveyor drive 0.75 kW, inverter-controlled Extraction: Exhaust fan 0.55 kW Exhaust capacity 5000 m³/h Compressed air: Operating pressure for gun control 4 – 5 bar Compressed air consumption 1200 Nl/min Electrical system: Installed total power 1.6 kW Machine weight approx. 600 kg Equipment: - 3 spray guns - without material pump Basic concept: - Spray booth with large-area glazing - Rubber-coated conveyor belts at the infeed and outfeed, roller conveyor in the spraying zone - Gun activation via workpiece detection with a pressure roller and microswitch - Electronic control system VT 50 for programming gun height and on/off points for each gun, display of belt speed, meters produced, and quantity - Overspray recovery via collection trays and collection tanks - Dry filter system for exhaust air purification - Operation by one person Note: The technical specifications have been taken from the manufacturer's operating manual and may differ from the actual design of the machine.

Condition: not inspected (used), Year of construction: 2005, functionality: unexamined, working width: 205 mm, working height: 60 mm, Spraying machine for profiles / Automatic spraying machine for moldings Manufacturer: Falcioni Type: Flexispray Year of manufacture: 2005 Linear continuous spraying machine for the automatic coating of profile moldings, frame moldings, profile boards, and baseboards, with a spray booth, belt conveyor, and programmable gun control. Typical applications: Molding production, frame and picture frame manufacturing, profile wood and panel production, contract coating. Intended coating materials according to the manufacturer: - UV stains and water-based stains - Water-based paints applied by spraying - UV paints Workpiece dimensions: Max. working width 205 mm Max. workpiece height 60 mm Minimum workpiece length 400 – 800 mm Feed: Feed speed 20 – 120 m/min Conveyor drive 0.75 kW, inverter-controlled Extraction: Exhaust fan 0.55 kW Exhaust capacity 5000 m³/h Compressed air: Operating pressure for gun control 4 – 5 bar Compressed air consumption 1200 Nl/min Electrical system: Installed total power 1.6 kW Machine weight approx. 600 kg Equipment: - 3 spray guns - without material pump Basic concept: - Spray booth with large-area glazing - Rubber-coated conveyor belts at the infeed and outfeed, roller conveyor in the spraying zone Tsdpo Aa Ad Tjfx Afged - Gun activation via workpiece detection with a pressure roller and microswitch - Electronic control system VT 50 for programming gun height and on/off points for each gun, display of belt speed, meters produced, and quantity - Overspray recovery via collection trays and collection tanks - Dry filter system for exhaust air purification - Operation by one person Note: The technical specifications have been taken from the manufacturer's operating manual and may differ from the actual design of the machine.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 7421, CMS PROFILE 7421 – Vertical CNC Glass Processing Centre with 2500/SP Vertical Glass Washing Machine Vertical CMS Brembana PROFILE 7421 CNC glass processing centre equipped with one front working spindle and one rear spindle. The machine has two tool magazines. The front magazine has a capacity of 13 ISO40 tools, while the rear magazine has a capacity of 6 ISO20 tools. The offer also includes a Tomatiglass/EGS 2500/SP vertical glass washing machine equipped with six brushes, pre-washing, washing and drying sections. The washing machine is fitted with soft brushes suitable for Low-E glass. Key Specifications of the CNC Centre: - Manufacturer: CMS Brembana - Model: Profile - Serial number: 7421 - Year of manufacture: 2015 - Total weight: 10,500 kg - Power supply: 400 Vac +10%/-15%, three-phase - Compressed air pressure: 6 bar - Compressed air connection: 1/2" - Clean water consumption: 60 l/min - Water pressure: 3–6 bar - Minimum glass size: 420 × 270 mm - Maximum glass height: 2,600 mm - Glass thickness: 3–30 mm - Front tool magazine: 13 positions, ISO40 - Rear tool magazine: 6 positions, ISO20 Vertical Glass Washing Machine: - Manufacturer: Tomatiglass/EGS Tsdpfx Afjz Il Htegsd - Model: 2500/SP - Serial number: 1560408 - Year of manufacture: 2008 - Glass thickness for washing: 3–19 mm - Number of brushes: 6 - Pre-washing, washing and drying sections - Soft brushes for Low-E glass A set of spare parts is included with the machines, together with an approximate valuation of the parts.

Condition: used, Year of construction: 1994, spindle diameter: 50 mm, spindle speed (min.): 6,000 rpm, We offer a used WEINIG Univar 10/2 profiling and rabbeting machine, primarily designed for rabbeting windows, doors, and similar profiles. The machine is equipped with two hydraulically controlled, right-hand precision spindles that can be raised and lowered, allowing for the clamping of three sets of tools on top of each other. The lifting mechanism uses a U-shaped motion, enabling the machining of short workpieces. The individual tool positions can be finely adjusted in the radial direction. To ensure high-quality machining without material tear-out, the first spindle allows the selection of either a left-hand or right-hand rotation direction. It is equipped with a mechanical brake for changing the direction of rotation. During the machining of the last 100 mm of each frame end, the spindle plunges into the wood with the corresponding matching tool, thereby reducing material tear-out in the corners of the frame. The construction also includes an additional support rail for large-format frames. Technical equipment and functions: * 2 hydraulically controlled, right-hand precision spindles that can be raised and lowered * Ability to clamp 3 sets of tools on top of each other * U-shaped lifting mechanism for machining short workpieces * Fine radial adjustment of individual tool positions Tjdpo Aguv Eefx Afgsd * Central lubrication of spindle units * Selection of left-hand and right-hand rotation for the first spindle * Mechanical brake for changing the direction of rotation * Additional support rail for large-format frames * Continuous, chainless feed using rubber-coated rollers with a very short pitch * Height adjustment of the feed beam using a ratchet * Program control with a selector switch for a single program * Automatic change of stroke for two workpieces in the tenon-rabbet section * Ability to program up to 4 workpieces, or 4 sides, for longitudinal profiling and rabbeting The machine does not include machining tools.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1988, - The machine was purchased new in 1988 and has been in our possession ever since. - The visual condition can be seen in the photos. Considering its age and the existing paint condition, the mechanical condition is satisfactory. - The machine is operational and can be demonstrated by prior arrangement. - The machine has been technically modified. This provides a second, higher speed for processing smaller pipe dimensions. - A protective frame has been manufactured to protect the machine, which helps to minimize external damage. The protective frame also has two mounts that can be used to prepare or mount various profiles. - The control panel has been expanded. As a result, up to 10 set values can now be pre-programmed. - The existing standard tools are included with the machine. All arbor diameters are 60 mm. - The original operating manual is available. - The scope of delivery includes a comprehensive selection of tools for various applications, including: Round tubes Flat bars for heavy and light arbors Square profiles Rectangular tubes T-profiles Angle irons Diagonal tools - A total of 15 pallets of tools belong to the machine (see photos and description). - The machine will only be sold together with the complete set of tools. - The price is ex works. The dismantling, loading, and collection of the machine must be carried out by the buyer himself or by a commissioned forwarding agent. Todpfoz Hcp Nex Afged Technical specifications according to available documentation. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 1984, machine/vehicle number: No.317, No.327, functionality: limited functionality, operating hours: 40,000 h, grinding height: 130 mm, grinding length: 250 mm, grinding spindle speed: 3,300 rpm, grinding width: 100 mm, table length: 400 mm, table width: 225 mm, Equipment: rotational speed infinitely variable, For sale are 2 (two) sets of optical profile grinding machines Wasino type GLS-130AS, with Fanuc control, made in Japan in 1984. 1 machine is working condition, there are videos of spindle runout and positioning X,Y accuracy measurements. Second machine serial No.327 is the same complete condition, just factory worker could not start it up for us, was worked more then 1 year ago. There are accessories, tools and technical documentation for each machine. For 1 machine Wasino complete with accesories and tools, price is 18500 euro EXW stock. Preferable to sell as package 2 machines together. Todpowh Udtsfx Afgsd

Condition: used, Year of construction: 1978, Equipment: documentation/manual, emergency stop, foot remote control, I am offering an electro-hydraulic profile bending machine, purchased in 2012, manufactured by Roundo AB, Sweden, type: R-7S (used, workshop-inspected, and partially refurbished with standard configuration, including vertically arranged bending axes, for sale. It is fully operational and can be demonstrated under power after prior consultation. - Control panel on the swivel arm with joysticks and switches - Digital displays for the two side rollers Tjdpfx Afjz Nhlisgod Significant added value: Extensive tool and profile package included! To be able to handle customer orders in an even more flexible and individual manner, significant investments have been made in expanding the range of tools. In addition to the standard tools, you will receive: • 36 additional rollers for a wide variety of profiles. • Special tool for flat and light-duty profiles up to a height of 500 mm. • Tools for square and rectangular tubes. • Tools for various round tubes Ø (88.9 + 114.3 + 139.7 + 168.3) mm. This machine is designed according to the latest findings in the tube and profile processing industry (as of 2012). The fixed bending roller is equipped with an adjustable slip clutch, which automatically adjusts the speed of the bending roller to the workpiece being bent. The three bending axes are mounted on oscillating roller bearings. A set of complete universal bending rollers for bending angle and T-sections with flange facing inwards and outwards, flat sections upright and lying flat, and square material. The rollers are made of wear-resistant and hardened steel. They consist of three adjustable rings, allowing various profiles to be rolled. Two independently adjustable guide rollers, which can be adjusted fully hydraulically on three different axes. The guide roller unit is equipped with small, interchangeable rollers. This allows asymmetric profiles to be held flat. This is especially necessary for angle sections with the flange facing inwards. Maximum pressure valve to prevent machine overload. Thermal overload protection for both electric motors. Main switch, emergency stop switch, 24 V transformer, equipment according to UVV standards. Multi-button switch mounted on the swivel arm for operating the machine. A set of keys and tools including operating manual in German. In practice, it has been shown that the quality of bending angle steel with the existing standard roller sets leads to limited results. Extensive investment! In recent years, important core components of the hydraulic system have been professionally renewed. The execution of the work is fully documented with existing invoices: • 2021: All hydraulic hoses were completely replaced. • 2022: As part of an oil leak repair, a brand new Bauer hydraulic motor was installed. The total cost for the motor including professional installation amounted to approximately €21,000 net. • Proof is available for the hydraulic motor: Test Certificate for Hydraulic Motors, Certificate of Conformity, Manufacture Certificate, and invoices. Sales and delivery conditions: • Pricing: Ex works (net, plus VAT). • Logistics: The dismantling, loading and collection must be organized and carried out by the buyer himself or by a freight forwarder commissioned by him. • Technical specifications according to existing documents. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 1978, Immediately available, free of any bankruptcy claims: Universal profiling steel shear with hole punch, Mubea Tods Aa Iqlepfx Afgsd Type KBL 11 N Year of manufacture 1978 Pressing force 35 tons Reach 320 mm Punching round holes up to 33 mm in diameter Cutting square sections up to 30 x 30 mm Cutting flat steel 100 x 10 mm Cutting angle iron 130 x 13 mm Cutting T-profiles 60 x 8 mm Various hole punches Weight 2 tons Price: EUR 1,750.00 plus VAT, ex works.

Condition: used, The Reckmann LM 16 profile grinding machine grinds profiles on wooden workpieces for woodworking. It is used to machine workpieces with profiled surfaces. The profile is transferred to the workpiece by means of feed, an oscillating grinding block and a swivelling holder Technical data: - Workpiece width: max. ~ 120 mm Todj Agf Dwjpfx Afgod - Workpiece height: max. ~ 80 mm - Grinding motor: 0.37 kW

Condition: used, Year of construction: 2000, We offer used Nikon V-12 profile projector, year of construction 2000. Manufacturer: Nikon Model: V-12 Serial number: 277120 Country of manufacture: Japan Objective magnification: 5x, 10x, 20x, 50 x, 100x, 200x Profile projector stand and various spare parts included Todpfxjz Tdmds Afged If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2017, Technical specifications: 2 rollers hydraulically adjustable 3 rollers driven Shaft diameter: 80 mm Lateral, hydraulically controlled arm correctors on the left and right CE marking Bending capacity, square bar: 60 x 60 x 3 mm Bending capacity, flat bar: 100 x 20 mm Bending capacity, tube: 88.9 x 4 mm Bending capacity, angle: 70 x 70 x 8 mm Round bar: 40 mm Motor power: 4.75 kW Control panel with digital display Dimensions (length x width x height): approx. 1650 x 1450 x 1550 mm Weight: approx. 1.6 tons Tsdpfx Afe Afby Degod The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: 8481-05-K951, Edge finishing with fine grinding We used this machine to process stair treads. 6 processing units: 1 x coarse grinding of the surface 2 x fine grinding of the surface 3 x profile milling on the top 4 x profile milling on the bottom 5 x profile grinding on the top 6 x profile grinding on the bottom Automatic feed – speed can be adjusted continuously Material thickness sensor The machine is equipped for processing stair treads with an edge rounding of r=8mm on the top and bottom (individually controllable). After cutting the treads to size on the circular saw or CNC machine, we completed the processing of the treads in a single pass from the top and bottom. The machine can also be adapted for other profiles, radii, or milling operations. Tedpfxjzv Eaxj Afged

Condition: excellent (used), Catalog number 7248 TECHNICAL DATA - max. workpiece height 160mm - spindle working length 250mm - spindle diameter 40mm - max. tool diameter 220mm Tedpfx Ao Af Iz Isfgsd - worktable dimensions (length/width) 420x1010mm - motor 11kW - 2 pneumatic workpiece clamps - dust extraction port diameter 180mm - dimensions (length/width/height) 1500x1010x1560mm - weight 689kg ADVANTAGES – Made in Germany – Used milling machine, very good condition Net price: 31900 PLN Net price: 7419 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to currency fluctuations)

Condition: used, Weight: approx. 3.5t, an on-site inspection is possible. Tsdpfx Ao Agwqhsfgjd

Condition: excellent (used), CATALOGUE NUMBER 7227 TECHNICAL DATA - working width 40 – 300mm - material thickness 10 – 35mm - min. material length 270mm - max. material length, no restrictions - max. feed rate 90m/min - feed rate continuously adjustable via a frequency inverter on the control panel - cutting speed 24m/min - milling motor power 2x4kW Todpfx Ae Aggcrofgjd - milling cutter speed 7500rpm - feed motor power 0.75kW - pneumatic pressure from above and from the sides - spindle diameter 40mm - motor-driven infeed conveyor with a length of 1130mm - manual / automatic control - PLC controller with a touchscreen for easy operation - compressed air connection 8 bar - dust extraction nozzle diameter 150mm - dimensions (L/W/H) 2550x1200x1400mm - weight 1100kg ADVANTAGES - German production - technical documentation (DTR) - machine for tongue-and-groove profiling - complete set of milling cutters and heads included - motor-driven infeed conveyor - unpainted - used machine, very good condition Net price: 107900 PLN Net price: 25100 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary with significant exchange rate fluctuations)

Year of construction: 2005, condition: good (used), functionality: fully functional, machine/vehicle number: 8382, 2-head welding machine for PVC profiles Tedpfx Afjzdq Tteged