Hybrid cleaning and degreasing system

IFP / EVT KP50HYBRID

Condition: good (used), Year of construction: 2000, Arburg 420C 1000-350 Clamping force: 100 tons Distance between tie bars: 420 x 420 mm Mold plattens: 570 x 570 mm Screw diameter: 35 mm Injection volume: 230 cm3 Ljdpfsrthkuex Ad Ajri Shot weight: 127 g New temperature control board ARB 777 (cost 2.750€)

Condition: good (used), Opportunity: 2x Pfeiffer Classic 590 available! Price: EUR 99.500/piece. Configuration Coater 1: 2x Pfeiffer TPH 2301 (2300ls) completely overhauled Pfeiffer DCU 600 2x VAT Throttle Valve 64048-pe48-ads2/0001 1x Pfeiffer PKR251 fullrange sensor Pfeiffer TPR280 for prevacuum Pfeiffer DUO 120 prepump (120m3/h) Vacuumchamber: for substrate size round 840mm Lsdpohwv Tfsfx Ad Aeri incl shielding and spare shielding set 2x viewport Several feedthroughs Rotating feedthrough incl thermocouple Infrared heater Watermanifold plus valves Vacuumvalves for venting-pumpdown etc Notes: Currently used for Resistance Evaporation (no boats available) Current PLC and E-cabinet is removed due to IP. However: if required our company Orange Thin Films can do a complete refurbishment with Labview automation and new processes (such as Eeam-Sputtering-Evaporation etc) Configuration Coater 2: 2x Pfeiffer TPH 2201 s p c (horizontal turbo 2200ls) completely overhauled Pfeiffer DCU 600 2x VAT Throttle Valve 64048-pe48-ads2/0001 1x Pfeiffer PKR251 fullrange sensor Pfeiffer TPR280 for prevacuum Pfeiffer DUO 120 prepump (120m3/h) Vacuumchamber: for substrate size round 840mm incl shielding and spare shielding set 2x viewport Several feedthroughs Rotating feedthrough incl thermocouple Infrared heater Watermanifold plus valves Vacuumvalves for venting-pumpdown etc Notes: Current used for Resistance Evaporation (no boats available) Current PLC and E-cabinet is removed due to IP. However: if required our company Orange Thin Films can do a complete refurbishment with Labview automation and new processes (such as Eeam-Sputtering-Evaporation etc)

Year of construction: 2024, condition: as good as new (ex-display), -usable internal dimensions: D=970mm H=540mm (other sizes on request) -touch screen -injection pressure: 3 bar -basket load: 200kg -Tank volume: 210L -Standard accessories: - Oil skimmer - Frame, cover and housing made of stainless steel - Time-controlled electric steam extraction - Reinforced basket in stainless steel - Stainless steel electric pump Lsdpfx Adsf A Nq Us Aeri - Stainless steel filter on the suction side of the pump - Stainless steel heating elements - Mechanical basket rotation with gear motor - Electrical system IP 65, control via SPS (DGT V4) - Automatic water supply - Safety limit switch monitors the cover opening - Spray nozzles in stainless steel - Weekly timer for heating and oil separator - Operating hours counter

Condition: new, Year of construction: 2025, machine/vehicle number: JEWELliner XS30-PRO Std, input voltage: 230 V, type of input current: AC, laser power: 30 W, type of cooling: air, total width: 400 mm, total height: 500 mm, total length: 600 mm, overall weight: 55 kg, warranty duration: 12 months, height adjustment type: electric, door opening width: 400 mm, door opening height: 200 mm, laser wavelength: 1,064 nm, Developed, produced and checked in Germany. JEWELliner "XS-PRO" model series "Standard" with 30W CW laser power equiped with an electric lift door, an auto-focus function and is builded in a compact machine dimension to fit into most rooms. - Developed and produced in Germany - Other models, laser power and options on request. Engraving Laser (fiber technology) with security housing „LASER CLASS 1“. Compact designed, all components are in the housing and will be air cooled. Maintenance free! Materials: metals, ceramic and some plastics. Applications can found in the jewellery ans also in other production areas. machine dimension: L60xW40H50cm, to integrade simple into a production area. Samples of material: steel, stainless steel, gold, silver, titan, aluminium, brass, copper, brounce, carbon, ceramic, makrolon Possibilities of application: - graphic engraving (logo, draw, handdraws, signatures) - serial numbers - barcode, datamatrix, QR-code - ring inside (f.e. name, date, symbol, handwrite) optional - ring outside (f.e. name, endless graphic, endless pattern) optional - bangles inside/outside - optional - text (text straight, circled text, bowed text, text symbols) - handwrite - finger print - photo engraving (photos, pictures) - micro engraving (micro text till 0.25mm character high) - round engraving (engraving on round or bowed surfaces) optional main parts of JEWELliner "XS" PRO Modell "Standard" : - fiber laser unit with scan head and focus pointer - security housing „Laser Class 1“ with 200x140mm security glass - manual door opening - emergency button - 180° view area to the marking field - electrical z-axis for focus positioning - configured engraving software "BNMARK5" ! Made in Germany ! developed by BN Laser - optional - rotary axis with removable jewelry jaw chuck Specification: - laser technology: fiber laser - outputpower CW: 30W - available frequency: 1.8 - 2000kHz - connection type data: USB 2.0 - wave length: 1064nm - lens (delivery): F-Theta 163 - marking field size: 110 x 110 mm – smaller possible - focus range: ca. 1.7 mm - min character high: 0.25 mm - min. line width: 0.023 mm - cooling: air cooled - maintenance: no service necessary - power: AC 110V / 240V – 50/60Hz – short cut save - dimension: L600 x W400 x H500 mm - weight: 55kg The engraving laser is after the delivery immediately ready to use. In this way, the machine can be integrated in the production very fast. The machines can be inspected and tested by appointment. Lodpfx Adjc Rmy Ns Ajri Pictures can be different!

Condition: used, TECHNICAL DETAILS - Number of axes : 4 Lrjdpouhaxxefx Ad Aoi - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 13 [mm] - Spindle speeds : 10'000 [rpm] COUNTER-SPINDLE - Z stroke : 140 [mm] GUIDE BUSH HOLDER 1 - Number of positions : 5 SECONDARY OPERATION - Number of positions : 3 POWER SUPPLY - Supply voltage : 3 x 380 [V] - Total installed power : 3.5 [kVA] EQUIPMENT - CNC : Fanuc 21iT - Parts catcher - Coolant tank * with high-pressure pump - Bar loader : LNS Alpha 320

Year of construction: 2025, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system type TR450 The spray rotary cleaning system type TR450 is an automatic cleaning and degreasing system with a cover that can be easily opened upwards. The system is designed for cleaning individual parts and/or bulk goods in baskets measuring LxWxH 520x320x200h mm. The basket must be closed with a lid for the cleaning process. The cleaning result depends on the fact that the parts can be easily circulated in the basket in the case of bulk goods. The fill level in the basket must be observed for this. The system is also equipped with a flood tray under the basket, which enables the parts to be scooped up in a flood, thus achieving an even better cleaning result. including the following equipment: - Completely made of stainless steel 1.4301 inside and out - Level monitoring and automatic fresh water refill Ledpfx Aofbt Sisd Aeri - Insulation of the entire system - Hot air drying (output: 11.6 kW) - Steam vapor extraction - Oil skimmer for bath maintenance - Automatic fresh water refill - 1 small parts basket 520x320x200h mm, mesh size: 6x6 mm, incl. height-adjustable lid Connected load: approx. 20 kW (32 amp plug)

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 2 MAIN SPINDLE - Spindle speeds : 6500 [rpm] - Max. bar diameter : 42 [mm] - Max. turning diameter : 120 [mm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Spindle speeds : 6500 [rpm] - Max. bar diameter : 42 [mm] - C axis indexing precision : 0.1 [°] POWER SUPPLY - Supply voltage : 230 [V] - Total installed power : 7.5 [kW] WEIGHT & DIMENSIONS - Machine floor space : 5.400 x 1.900 [mm] - Machine height : 2.000 [mm] - Machine weight : 5.000 [kg] MACHINE HOURS - Number of hours under power : 33912 [h] - Number of working hours : 21069 [h] EQUIPMENT - CNC : FANUC 160i Lrjdpfx Adou E U Ufj Aji - Coolant tank - Chips conveyor - Parts catcher - Parts conveying strip

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 29,000 W, spindle speed (max.): 5,000 rpm, overall weight: 620 kg, number of axes: 6, This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. A highly productive CNC turn-mill center, it features a main spindle and subspindle both with a max torque of 250 Nm and speeds up to 5000 rpm. The milling spindle offers up to 12000 rpm. Includes a 40-position tool magazine, 12-position turret, and advanced Sinumerik ONE control system. If you are looking to get high-quality turning and milling capabilities consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for more information. • Main spindle (direct drive): • Max. torque: 250 Nm • Subspindle (direct drive): • Max. drive power: 29 kN (as provided) • Max. torque: 250 Nm • Speed range: 0–5000 rpm • Milling spindle (direct drive): • Max. drive power: 37 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Tool turret (direct drive): • Max. drive power: 10 kW • Max. torque: 30 Nm • Speed range: 0–12000 rpm • Kinematics and axes: • Cross slide at the top with turning/milling spindle as motor spindle; hydraulic clamping during turning • Y-axis travel: +/- 120 mm • B-axis with direct drive: +/- 120°, hydraulic clamping • Tooling: • 40-position tool magazine, HSK-T63 • 12-position radial turret with direct drive, BMT55P tool interface • Spindles and clamping: • High-clamping cylinder with draw tube for main spindle • Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in counter spindle • Programmable clamping pressure for main and counter spindle • External feed flushing on main and counter spindle • Mechanical holding brake on main and counter spindle • C-axis for main and counter spindle • Control and HMI: • SINUMERIK ONE / OPERATE, EMCONNECT app-based UI • 22" multi-touch display • IPC with 240 GB • SHOPTURN dialog programming • 3D simulation and Drawing • Residual material detection • Unblocking from external memory • CAD reader (DXF import) • TRANSMIT and TRACYL for C-axis programming • USB interface, Network drive (Ethernet) • PC keyboard incl. HMI hotkey • LED status bar • Fluids and utilities: • 2 coolant lines at 25 bar • 2 flushing pumps at 4.3 bar • Control cabinet air conditioning unit • Cooling system for spindle motors, milling spindle, B-axis torque motor, and turret direct drive • Hydraulic unit • Machine light • 8 leveling elements • Feedback/measurement: • Glass scales: X1 (incl. air system), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl) Additional equipment • Chip management and filtration: • Hinged belt chip conveyor, discharge height 1200 mm • Belt filter system, 980 liters • Dirty water pump • Control/monitoring options: • BAOD-SL electronic handwheel (portable, magnetic mount for Siemens controllers) • EMCO tool breakage and wear monitoring / B40D-SL • Wireless probe / HSK drill breakage control BK-MICRO • 4-axis turning / balance cutting (SINUMERIK option) • Alternative-end spindle speed (SINUMERIK option) • Turret as tailstock (SINUMERIK option) • Counter spindle as tailstock (SINUMERIK option) • Bar feeder (specifications as provided): • Bar length: 300–1200 mm • Bar diameter: 10–104 mm Ledpfsx D E Hbjx Ad Aeri • Material support surface (front view): 800 x 1250 mm • Material capacity: 12 bars with 65 mm diameter • Max. load capacity: 400 kg (max. 74 kg/bar) • Rectangular material: min. edge length 6 mm; max. circumference 105 mm • Hexagonal material: SW 5 to 85 mm • Round material:

Condition: ready for operation (used), Year of construction: 2021, General Data Machine weight 2500–2950 kg Lrjdpsx D Nfujfx Ad Aoi This 12-axis Citizen Cincom M16-4M8 was manufactured in 2021, featuring a robust configuration with up to 38 tools, including gang, turret, and back tool post options. It supports a rapid feed rate of 32 m/min, with specialized rates for X2, Y2, and B axes. The main spindle motor outputs 2.2/3.7 kW, ensuring efficient operations. Consider the opportunity to buy this Citizen Cincom M16-4M8 Swiss type turning machine. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2022, spindle motor power: 5,500 W, spindle speed (max.): 6,000 rpm, total height: 1,858 mm, product length (max.): 3,675 mm, number of axes: 7, General Data Measurements height 1858 mm Dimensions Machine Length 3675 mm Lsdpfx Ajx Ixigod Ajri Main Drive Number of axis 7 Spindle Speed 6000 RPM Spindle motor power 5.5 kW Technical Specification Driven Tools yes This 7-axis NAKAMURA Tome WT150 II was manufactured in 2020, featuring dual 12-tool turrets and motorized positions for enhanced flexibility. It includes a high-pressure coolant pump and a bar feeder interface with an LNS Quick Load Servo 80 S2. Ideal for complex turn-mill operations, consider the opportunity to buy this NAKAMURA Tome WT150 II turn-mill centre. Contact us for more information about this machine. Application Types Turning