Condition: used, Year of construction: 1997, operating hours: 25,000 h, functionality: fully functional, machine/vehicle number: 96108, total length: 3,000 mm, total width: 2,500 mm, total height: 2,800 mm, overall weight: 3,000 kg, water consumption per time unit: 10 l/min, inner diameter: 1,400 mm, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, pressure: 5 bar, compressed air connection: 5 bar, reception height: 1,000 mm, input current: 50 A, injection pressure: 4 bar, temperature: 50 °C, heating capacity: 30 kW (40.79 HP), power: 37 kW (50.31 HP), load capacity: 80 kg, operating pressure: 4 bar, empty load weight: 2,000 kg, Equipment: documentation/manual, Offered for sale is a spray cleaning system with an aqueous cleaner, featuring a two-stage spray cleaning process with a spray pressure of 4 bar. The basket is rotated or pivoted. Basket dimensions: L x W x H 815 x 565 x 525 mm. Throughput: approximately 4 baskets/hour. Fluid capacities: Washing 350 liters / Rinsing 250 liters. Heating capacity: Washing 18 kW, Rinsing 12 kW. Program sequence controlled by a PLC. Exhaust air for fume extraction: approximately 500 m3/h. Cjdpfx As Ah Hl Uektjhd Accessories: 240 liters of liquid cleaner + 30 liters of rust protection.

Condition: used, Year of construction: 2008, operating hours: 5,778 h, functionality: fully functional, total width: 1,980 mm, total length: 3,750 mm, total height: 2,050 mm, pressure: 2,500 bar, operating pressure: 2,500 bar, fuel: diesel, overall weight: 2,600 kg, rotational speed (max.): 1,800 rpm, high-pressure hose length: 20,000 mm, water tank capacity: 400 l, volume flow: 1.2 m³/h, empty load weight: 1,940 kg, temperature: 40 °C, fuel tank capacity: 220 l, type of cooling: water, noise level: 103 dB, power: 129 kW (175.39 HP), year of last overhaul: 2026, water pressure: 2,500 bar, cubic capacity: 4,760 cm³, pump capacity: 20 l/min, Equipment: type plate available, Falch trail jet 100 2500-20-0-d with a maximum of 2500 bar and 20 l/min. The pump is driven by a water-cooled 4-cylinder DEUTZ diesel engine. General specifications: ----- Operating pressure: 2500 bar Flow rate: 20 l/min Maximum pump speed: 590 rpm Drive engine: 4-cylinder DEUTZ diesel Drive engine power: 129 kW Drive engine speed: 1800 rpm Fuel tank: 220 L Cedpfx Ako Agb Dzstehd Maximum fuel consumption: 12.5 L/h Safety system: ----- Low water level safety valve Burst discs Steel safety frame Impact-resistant water tank Impact- and rust-resistant fuel tank Electronic Falch Easy display system Engine temperature Alarm for open lid Oil pressure Engine overheating Advantages: ----- Shorter setup times Steel safety frame for reduced downtime Water filter for consistent water quality High-quality components reduce maintenance costs Water-cooled diesel engine Long service life Maintenance every 500 hours Low fuel consumption Theft protection Dimensions and unladen weight: 3750mm x 1980mm x 2050 mm (1940 kg) Includes standard accessories (20m HD hose, control cable, gun with lance and jet nozzle) and rotor nozzle. Condition: HD pump has a new seal kit, new battery and water filter. Similar to, but not a Denjet, Dynajet, Hammelmann, Kamat, Uraca, Woma, etc.

Condition: used, Year of construction: 2001, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, compressed air connection: 6 bar, input current: 204 A, heating capacity: 90 kW (122.37 HP), power: 50 kW (67.98 HP), load capacity: 750 kg, Equipment: documentation/manual, We offer a cleaning and degreasing system, type VAIOCS S G, as a front-loading system (used system from 2002 – completely overhauled* + new cleaning chamber) for batch sizes with a maximum diameter of 1,500 mm and a maximum height of 600 mm, for use with modified alcohol (A III) or hydrocarbons (A III). * Vacuum pump new – all media-carrying pumps new – remaining pumps overhauled – Control cabinet, S7-300 control system, graphic display MP377 and safety technology upgraded to the latest standard – Pneumatics (Festo) serviced and partially new – pneumatic installation completely new – Electrical installation partially new – valve seals new – container insulation new – Refrigeration unit overhauled – Cleaning chamber, basket holder, swivel mechanism and door completely new Manufacturer: EMO Type: VAIOCS SG Order number: 515215 Chedpfx Akj Ahx Dtotsd Year of manufacture: 2001 / 2016 Operating voltage: 400 V/N/PE Control voltage: 24 V DC Connected load: 140.0 kW Heating power: 90.0 kW Motor power: 50.0 kW Rated current: 204 A Solvent: Nikutex 2307 Filling volume: 5000 l If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 14,726 h, functionality: fully functional, total width: 1,270 mm, total length: 1,450 mm, total height: 1,420 mm, pressure: 1,000 bar, operating pressure: 1,000 bar, type of input current: three-phase, overall weight: 635 kg, noise level: 75 dB, input voltage: 400 V, year of last overhaul: 2026, Falch R10/800 - 1000 Bar, 13lpm 2013 model Owned since new - full service history Cede Ah E Awopfx Aktohd Operating hours - 14726 Unit can be seen working - slight weep on pump head. producing 1000 bar Sold as seen Complete with used dump gun, lance and 20m rubber hose Rotary nozzle to be purchased additionally Ideal for formwork cleaning, concrete removal

Condition: defective spare-parts repository (used), functionality: not functional, HAKO cleaning machine, sweep-and-vacuum machine Designation: HAKO B1100 Drive: ELECTRIC Condition: see photos / NOT OPERATIONAL / FOR DIY ENTHUSIASTS Item No.: B 1100 Manufacturer: HAKO Year of manufacture: unfortunately not identifiable Operating hour counter: reads "unfortunately not identifiable" Electric operation (Charger is not included in this offer) New price approx. €49,900 Price applies for collection from warehouse 47441 Moers Various cleaning and scrubbing machines in stock We offer the item as shown in the pictures. Chodpfxe Ahpwzo Akted Inspection is expressly offered. General: We offer various items here, which we describe as accurately as possible and include informative photos. No further information on the item can be provided. If required, the item can be taken away immediately. Unless explicitly stated, this offer is for USED GOODS. We offer the item as shown in the pictures. All offers are ex warehouse 47441 Moers. If you require shipping, please contact us to discuss packaging and shipping costs. (Shipping costs are approximately €650 net, depending on the distance) All dimensions are approximate.

Condition: used, Year of construction: 2018, operating hours: 15,339 h, functionality: fully functional, machine/vehicle number: 01584, Available for sale: a used TOMCO2 DE11RB-1500 CE industrial dry ice pelletizer. This machine is designed for on-site production of dry ice pellets. The TOMCO 1500-series specifications indicate a nominal production capacity of approximately 1,500 lb/hour (680 kg/hour). Actual output depends on the CO₂ supply and operating conditions. Machine details: Manufacturer: TOMCO2 Systems Model: DE11RB-1500 CE Year: 2018 Machine number: 01584 Operating hours: 15,339 Condition: Used, listed as excellent and fully functional Nominal capacity: approx. 680 kg/hour Cjdoz Az Hwjpfx Aktohd Hydraulic system with two cylinders Motor: 30 HP (22.4 kW) Pellet diameters listed for this model: 6–19 mm, depending on the die configuration Operation and maintenance manual available Suitable for businesses producing dry ice pellets for dry ice blasting, food and seafood processing, transport, and related industrial applications. The machine is located in Noordwijkerhout, the Netherlands. Worldwide shipping can be arranged. Contact us for further information, additional photos, an inspection, or shipping details. Worldwide Shipping. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, dry ice paint removal, dry ice coating removal, rust removal, fire and soot damage cleaning, electrical panel cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice TOMCO2 DE01RB-1500, TOMCO dry ice pelletizer, TOMCO2 dry ice pelletizer, industrial dry ice pelletizer, dry ice production machine, dry ice pellet production machine, dry ice extruder, CO2 pelletizer, industrial dry ice production equipment, dual-cylinder dry ice pelletizer, 680 kg/h dry ice machine, 1500 lb/hour dry ice pelletizer, used dry ice production machine, dry ice machine for sale, dry ice pelletizer Netherlands, dry ice production equipment Europe, DrDryice

Condition: refurbished (used), Year of construction: 2011, operating hours: 70,610 h, functionality: fully functional, machine/vehicle number: M204010328, working width: 1,420 mm, tank capacity: 110 l, water tank capacity: 212 l, year of last overhaul: 2026, We are offering this fully reconditioned Tennant M20 ride-on floor scrubber, manufactured in 2011. Manufacturer: Tennant Model: M20 Year of manufacture: 2011 Condition: fully reconditioned Serial number: M204010328 Chedpsz D E Ebefx Aktsd New accessories (brushes, rollers), new circuit board. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2003, operating hours: 12,000 h, functionality: fully functional, ASCO BP407 – Automatic Dry Ice Production Machine for Blocks, Slices, and Pellets For sale: a used ASCO BP407 automatic dry ice production machine. It produces dry ice blocks and slices in different thicknesses, as well as 3 mm and 16 mm dry ice pellets. The product formats are integrated into the machine and selected via the touchscreen, so manual die changes are not required when switching between formats. Machine details: - Manufacturer: ASCO - Model: BP407 - Year of manufacture: 2003 - Operating hours: 12,635 - Condition: Used, fully functional - Products: Dry ice blocks, slices, and pellets - Pellet sizes: 3 mm and 16 mm - Stated maximum capacity: up to approximately 400 kg/h, depending on product format and settings - Reported production in use: approximately 250–300 kg/h - Operating hours since that service: 603 - Pump and cylinder have previously been replaced - Technical manuals, service reports, and maintenance history are available - Additional parts and spare parts are included Csdpfxey R I Uqs Aktshd The machine comes from a large industrial factory that replaced its production line and switched to another machine brand. The BP407 is now available for sale. Worldwide Shipping Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, dry ice blasting machine for sale, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning. ASCO BP407, ASCO BP407 dry ice machine, ASCO dry ice production machine, automatic dry ice production machine, industrial dry ice machine, dry ice block machine, dry ice slice machine, dry ice pelletizer, dry ice pellet production machine, dry ice block and pellet machine, dry ice blocks and slices production, dry ice production equipment, dry ice manufacturing machine, CO2 dry ice production machine, carbon dioxide dry ice machine, 3 mm dry ice pellet machine, 16 mm dry ice pellet machine, used ASCO BP407, used dry ice production machine, second-hand dry ice machine, industrial dry ice production equipment.

Condition: ready for operation (used), functionality: fully functional, operating pressure: 2,500 bar, total length: 3,300 mm, high-pressure hose length: 2,000 mm, total height: 2,030 mm, total width: 1,500 mm, pressure: 2,500 bar, type of input current: DC, input voltage: 12 V, fuel: diesel, pressure (max.): 2,500 bar, water pressure: 2,500 bar, We are selling our Falch 2500 bar. Water preasure system , fully functional and ready for work. Test available in our place. Cjdpfxexixpmo Aktshd We have the machine since year 2007 and have been using it only for removing old road marking paint from roads. The machine has always been absolutely on time serviced and mantained. Please call for more information.

Condition: reconditioned (used), Year of construction: 2019, operating hours: 290 h, functionality: fully functional, working width: 430 mm, area performance: 1,700 m²/h, overall weight: 179 kg, warranty duration: 12 months, water tank capacity: 30 l, HAKO SCRUBMASTER B30 TB430 SCRUBBER NEW 12V 85Ah SIAP GEL BATTERIES (2x) Manufactured in 2019 with 290 hours of operation 430mm cleaning head (TB430) equipped with a new medium-hard disc brush, allowing work on any surface. Chedpfx Akszcxk Setsd New polyurethane squeegee rubbers, resistant to contact with oily liquids, grease, and petroleum products. A built-in battery charger simplifies daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's contour. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 430 Suction nozzle working width (mm): 760 Theoretical capacity (m²): 1700 Tank capacity (l): 30/30 Machine weight, ready to use (kg): ~179 Power output (kW): 1.13 INCLUDED: NEW 12V 85Ah SIAP GEL BATTERIES (2x) NEW 24V 400W suction turbine NEW 430mm PPL 0.5 disc brush NEW drain hose NEW suction hose NEW head guard rubber Built-in battery charger Squeegee blade with new oil-resistant rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 30-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise solution extraction from the cleaned surface. The large working width (430mm) ensures high surface coverage. The control panel is easy to read and intuitive to use.

Condition: like new (used), Year of construction: 2003, operating hours: 20,328 h, Cold Jet PPAH-325B Dry Ice Pelletizer / Dry Ice Production Machine Cold Jet PPAH-325B – Industrial Dry Ice Production Machine Professional industrial equipment designed for the production of dry ice. The machine is built as a heavy-duty industrial unit with an integrated hydraulic system, control panel, and CO₂ pressure monitoring. Machine details: Manufacturer: Cold Jet Cedpfx Aksz Adwistjhd Model: PPAH-325B Application: Dry ice production Operating hours: 2,032.8 hours Integrated hydraulic power unit Electronic HMI/control panel Emergency stop Hydraulic pressure monitoring Chamber pressure monitoring Injection pressure monitoring Vapor CO₂ pressure monitoring Liquid CO₂ pressure monitoring Separate vapor and liquid CO₂ controls Heavy-duty industrial steel frame The machine is currently located at our facility in the Netherlands. The PPAH-325B is a professional industrial machine suitable for companies involved in dry ice production and applications requiring their own dry ice supply. Worldwide delivery can be arranged. Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, used dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: ready for operation (used), Year of construction: 2005, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: X-tra 550 HI, total width: 495 mm, total length: 620 mm, total height: 570 mm, maximum load weight: 10 kg, heating capacity: 3,000 kW (4,078.86 HP), tank capacity: 45 l, type of input current: three-phase, inner dimension height: 350 mm, inner dimension length: 500 mm, inner dimension width: 300 mm, overall weight: 35 kg, input voltage: 400,208 V, input frequency: 5,060 Hz, year of last overhaul: 2026, • Ultrasonic cleaning unit Elma X-tra 550 HI See data sheet in the appendix 1 unit Chsdpfez Tlalex Akted • Rinsing basin X-tra 550 HI SW See data sheet in the appendix 1 unit (one of which currently has a defective heating element) • Drying basin X-tra 550 WLT See data sheet in the appendix 1 unit Condition: used – fully functional – the units have been cleaned and their functionality checked by the maintenance department Year of manufacture: 2005 I am available for further information.

Condition: used, Year of construction: 2013, ZIPPEL REMA K1 400 3 LB Industrial parts cleaning system (washing system) Year of manufacture: 2013 Washing, rinsing, and drying in a continuous system with a washing basket to remove oils, chips, and dirt from workpieces before further processing or assembly. Approved according to WHG (German Water Resources Act). System is currently powered. System description, technical data & plans – see PDF. All technical specifications, illustrations, and content are non-binding and without warranty. Subject to change and errors. All other accessories visible in the photos are not included in the scope of delivery and are therefore not part of this sale. The scope of delivery only includes the accessories that are explicitly listed here, in the order confirmation, and on the invoice. EXW (Ex Works) D-92729 Weiherhammer Exclusively disassembly, removal, and loading Delivery time: immediately Chsdpfx Aks Ahm Smetsd Subject to prior sale / Payment due immediately upon purchase.

Condition: used, Year of construction: 2016, IceTech SAW – Industrial Dry Ice Block Saw with Conveyor – 2016 IceTech industrial sawing machine for cutting pre-formed dry ice blocks and slabs into smaller pieces. The machine features a stainless steel enclosure, an integrated conveyor, and a Beckhoff operator panel. It is equipped with an enclosed cutting section, an emergency stop button, and adjustable levelling feet. This is an option for dry ice producers and businesses looking for equipment for a dry ice processing or packaging line. Suitability for the required block format and production layout should be checked. Technical specifications: • Manufacturer: IceTech, Denmark • Machine designation: SAW • Machine number: 512792 • Serial number: 2016-09-04 • Year of manufacture: 2016 • Machine weight: 330 kg Cedpfxo Ahg Ebe Aktjhd • Electrical supply: 3 × 400 V AC • Frequency: 50/60 Hz • Nameplate current: 16 A • Maximum system pressure: 10 bar • Operator panel: Beckhoff • Integrated conveyor • Stainless steel enclosure ASCO dry ice saw, ASCO AAS, ASCO AAS01, ASCO Active Dry Ice Saw, ASCO Passive Saw, ASCO dry ice block cutter, ASCO dry ice cutting equipment, Tannewitz dry ice saw, Tannewitz dry ice bandsaw, Tannewitz 24 inch dry ice saw, Tannewitz 36 inch dry ice saw, Cold Jet dry ice equipment, ColdJet dry ice processing equipment, Cold Jet IceTech saw, IceTech dry ice block saw, PEHAKA dry ice saw, PEHAKA special purpose bandsaw, Dadaux ice saw, Dadaux bandsaw, Dadaux SX 350 KC, KC Tecnologia ice saw, KC Tecnologia SX 220, KC Tecnologia SX 350 KC, KC Tecnologia SX 400, KC Tecnologia C70, Big Block Cutter C70, BF TECH ice saw, BF Technology ice bandsaw, BF TECH C70, BF TECH ice block cutter, industrial dry ice block saw, dry ice slab cutting machine, dry ice slice cutter, solid CO2 cutting equipment, conveyor saw for dry ice blocks, used dry ice saw for sale, second-hand dry ice cutting machine, stainless steel ice bandsaw, industrial ice block cutting equipment. IceTech SAW, IceTech dry ice saw, IceTech 512792, dry ice block saw, dry ice cutting machine, dry ice block cutter, dry ice slab saw, dry ice slab cutter, dry ice slice cutter, dry ice portioning machine, solid CO2 saw, solid carbon dioxide cutting machine, industrial dry ice saw, conveyor dry ice saw, enclosed dry ice saw, dry ice processing equipment, dry ice production line equipment, dry ice packaging line equipment, dry ice block processing, dry ice slab processing, used dry ice equipment, second-hand dry ice saw, stainless steel dry ice saw, Beckhoff operator panel, dry ice machinery for sale.

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, For sale is our Fisa 3-chamber cleaning system for aluminum die-casting tools. The sale includes the associated ABUS crane, as shown in the picture. Plus, there are 2 full containers of cleaning agent. Chsdoz Rpnnjpfx Aktod

Condition: good (used), Year of construction: 2005, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Csdj Aardpepfx Aktehd Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: reconditioned (used), functionality: fully functional, pressure: 200 bar, empty load weight: 168 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KÄRCHER HDS 10/20-4M HOT WATER PRESSURE WASHER The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-reinforced hose, and a 25° power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. A highly efficient, low-speed three-phase motor ensures stable performance, even during prolonged use. With an operating pressure of 200 bar and a flow rate of 1000 l/h, this machine is well-suited for heavy-duty tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the images. TECHNICAL DATA: Model: HDS 10/20-4M Supply voltage: 400V ~ 3-phase Flow rate (l/h): 500 – 1000 Operating pressure (bar): 30 – 200 Max. Water heating temperature (°C): 80–155 Connected load (kW): 7.8 Fuel tank capacity (l): 25 Cleaning agent tank capacity (l): 20 + 10 High-pressure hose length (m): 10 Weight (kg): 168 Dimensions (L x W x H, mm): 1330 x 750 x 1060 EQUIPMENT: NEW heavy-duty high-pressure spray gun from the German brand R+M NEW stainless steel spray lance NEW reinforced, steel-braided high-pressure hose (10 m) NEW 25° power nozzle Codpfx Ako Ah Siqotshd Water filter and GEKA-style quick-connect couplings – INCLUDED (FREE) KEY FEATURES: Open oil system – no operating time restrictions Two built-in chemical tanks allow for the direct dispensing of cleaning agents through the machine Highly legible and intuitive control panel Simple design with easy access to internal components, making the machine user-friendly and straightforward to service Tank for water-softening agent (RM110) prevents corrosion and limescale buildup within the heating coil and other internal plumbing. An exhaust gas temperature sensor shuts off the engine if the temperature exceeds 300°C. When the eco!efficiency mode is activated, the unit heats the water to 60°C, which allows for effective cleaning—even of heavy soiling—while simultaneously reducing fuel consumption by approximately 20%.

Condition: reconditioned (used), Year of construction: 2023, operating hours: 36 h, functionality: fully functional, working width: 510 mm, area performance: 2,000 m²/h, overall weight: 230 kg, warranty duration: 12 months, water tank capacity: 42 l, HAKO SCRUBMASTER B45 TB510 Scrubber-Dryer New SIAP 12V 105Ah gel batteries (2x) 2023 model year; 36 hours of operation 510mm cleaning head (TB510) equipped with a new medium-stiffness disc brush, suitable for use on any surface New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances Built-in battery charger simplifies daily operation New splash guard around the brush head prevents water from spraying outside the machine's footprint Equipped with a new, durable drain hose and a new suction hose New suction motor ensures high water pickup performance from the squeegee Each unit we offer features unique, actual photos; you are buying the exact machine shown Chjdpfjz Eh R Nsx Akted TECHNICAL DATA: Supply voltage: 24 V Brush working width (mm): 510 Squeegee working width (mm): 860 Theoretical coverage (m²): 2000 Brush speed (rpm): 210 Tank capacity (l): 42/42 Weight ready for operation (kg): ~230 Power (kW): 1.31 INCLUDED: NEW SIAP 12V 105Ah gel batteries (2x) NEW 24V 400W suction motor NEW 510mm PPL 0.5 disc brush NEW suction hose NEW drain hose NEW brush head splash guard Squeegee assembly with new oil-resistant blades Built-in battery charger Tenzi Normal cleaning fluid (5 liters) – FREE KEY FEATURES: 42-liter tank capacity allows for a large volume of cleaning solution, minimizing work interruptions for refilling The machine's design ensures excellent maneuverability. A tight turning radius allows for operation in narrow passageways and aisles. The parabolic squeegee ensures thorough suction of the solution from the cleaned surface. A wide working width (510 mm) ensures high area coverage. A highly legible and intuitive control panel.

Condition: reconditioned (used), Year of construction: 2021, operating hours: 402 h, functionality: fully functional, working width: 430 mm, area performance: 1,900 m²/h, overall weight: 190 kg, warranty duration: 12 months, water tank capacity: 30 l, HAKO SCRUBMASTER B30 CL TB430 SCRUBBER NEW 12V 85Ah SIAP GEL BATTERIES (2x) Manufactured in 2021 with 402 hours of operation 430mm cleaning head (TB430) equipped with a new medium-hard disc brush, allowing work on any surface. New polyurethane squeegee rubbers, resistant to contact with oily liquids, grease, and petroleum products. The built-in battery charger and wheel drive simplify daily operation. A new protective rubber around the brush head prevents water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer is individually photographed; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 430 Squeegee working width (mm): 760 Theoretical capacity (m²): 1900 Working speed (km/h): 4.5 Tank capacity (l): 30/30 Weight (ready to use): ~190 Power (kW): 1.31 INCLUDED: NEW BATTERIES 12V 85Ah SIAP GEL BATTERY (2x) NEW 24V 400W suction turbine NEW 430mm PPL 0.5 disc brush NEW drain hose NEW suction hose NEW head guard rubber Built-in battery charger Squeegee blade with new oil-resistant rubbers Cjdex Tp R Eepfx Aktehd 5L Tenzi Normal fluid - FREE KEY FEATURES: The 30-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The large working width (430mm) ensures high surface coverage. The control panel is very clear and intuitive.

Condition: used, Year of construction: 2019, operating hours: 196 h, functionality: fully functional, machine/vehicle number: W09D013KWKAD43636, operating pressure: 500 bar, total length: 2,910 mm, high-pressure hose length: 500 mm, total height: 1,770 mm, total width: 1,720 mm, pressure: 500 bar, empty load weight: 760 kg, fuel: diesel, heating capacity: 115 kW (156.36 HP), overall weight: 760 kg, water tank capacity: 300 l, fuel tank capacity: 70 l, power: 13 kW (17.68 HP), temperature: 95 °C, volume flow: 0.9 m³/h, noise level: 104 dB, pressure (max.): 500 bar, Equipment: chassis, crane, This well-maintained DYNAJET 500th 15 HELI hot and cold water high-pressure unit is available for immediate delivery. Manufactured in 2019 and having only 196 operating hours, the machine is in excellent condition and is being delivered fully serviced, fully functional, and ready for operation. Designed for demanding industrial cleaning applications, the DYNAJET 500th 15 HELI combines powerful cleaning performance with compact dimensions, low weight, and excellent mobility. With an operating pressure of up to 500 bar and hot water temperatures up to 95°C, the machine is ideally suited for removing heavy contamination, coatings, grease, and industrial residues. The unit is equipped with a reliable Kubota diesel engine, integrated hot water system, and a large 300-litre water tank for independent operation even where external water supply is limited. The trailer-mounted design ensures maximum flexibility and easy transportation between jobsites. To ensure many years of reliable operation, the machine will be supplied with a brand-new 50 m high-pressure hose. A turbo nozzle and standard flat-jet nozzle are included in the sale. Cedpfxjz Nd Ndj Aktehd Key features and advantages: * Year of manufacture: 2019 * Only 196 operating hours * Fully serviced before delivery * Fully functional and ready for operation * Maximum operating pressure: 500 bar * Flow rate: up to 15 l/min * Hot water temperature up to 95°C * Powerful Kubota 3-cylinder diesel engine * Integrated hot water system with high-performance burners * 300-litre integrated water tank * Approx. 70-litre fuel tank * Trailer-mounted unit with overrun brake * New 50 m high-pressure hose included * Turbo nozzle included * Standard nozzle included * Compact, robust and easy to transport *Ideal for industrial cleaning, surface preparation and professional service applications Please contact us if you are interested or would like to receive further information, pricing details, additional photos, or arrange a viewing of the machine. We will be pleased to assist you.

Condition: reconditioned (used), Year of construction: 2015, operating hours: 1,618 h, functionality: fully functional, working width: 650 mm, area performance: 3,200 m²/h, overall weight: 391 kg, warranty duration: 12 months, water tank capacity: 74 l, Hako Scrubmaster B70 CL TB650 scrubber-dryer New SIAP 6V 175Ah gel batteries (4x) 2015 model year; 1,618 operating hours 650mm cleaning head (TB650) equipped with two new medium-stiffness disc brushes, suitable for use on any surface New polyurethane squeegee blades, resistant to oils, greases, and petroleum-based substances Built-in battery charger and wheel drive facilitate daily operation The unit is equipped with a new, durable drain hose and a new suction hose A new suction motor ensures high water extraction power from the squeegee Chedpez A Dmnjfx Aktsd Each unit we offer features individually taken photos; you are buying the exact machine shown TECHNICAL DATA: Supply voltage (V): 24 Brush working width (mm): 650 Squeegee working width (mm): 950 Theoretical coverage (m²): 3200 Working speed (km/h): 5 Tank capacity (l): 72/74 Weight (kg): ~391 Power (kW): 2.28 INCLUDED: NEW 6V 175Ah SIAP gel batteries (x4) NEW 330mm PPL 0.5 disc brushes (x2) NEW 24V 600W suction motor NEW suction hose NEW drain hose NEW brush head splash guard Squeegee assembly with new oil-resistant blades Built-in battery charger Tenzi Normal cleaning fluid (5 liters) – FREE KEY FEATURES: The 72-liter tank allows for a large volume of cleaning solution, minimizing the need to stop work for refills The machine's design makes it highly maneuverable; a tight turning radius allows for operation in narrow passages and aisles. The parabolic squeegee ensures thorough suction of the solution from the cleaned surface. The wide working width (650 mm) ensures high area coverage. The control panel is highly legible and intuitive to operate.

Condition: reconditioned (used), functionality: fully functional, operating pressure: 160 bar, pressure: 160 bar, empty load weight: 96 kg, input voltage: 400 V, warranty duration: 6 months, temperature: 155 °C, KÄRCHER HDS 798 C Eco HOT-WATER PRESSURE WASHER The unit comes with new accessories, including a spray gun from the German brand R+M, a stainless steel lance, a steel-reinforced high-pressure hose, and a 25° power nozzle. A durable brass pump head, equipped with new ceramic pistons and seals, ensures long-lasting, trouble-free operation. The highly efficient three-phase motor guarantees stable performance, even during prolonged use. With an operating pressure of 160 bar and a flow rate of 650 l/h, this machine is well-suited for demanding tasks in construction, industry, logistics, and agriculture. Each unit we offer is photographed individually; you are purchasing the exact machine shown in the pictures. TECHNICAL SPECIFICATIONS: Supply voltage [V]: 400 (3-phase) Flow rate [l/h]: 650 Operating pressure [bar]: 30–160 Max. Heating temperature [°C]: 80–155 Connected load [kW]: 4.5 Hose length [m]: 10 Weight [kg]: 96 Dimensions (L x W x H, mm): 940 x 600 x 740 EQUIPMENT: NEW heavy-duty pressure gun from the German brand R+M NEW stainless steel spray lance NEW reinforced, steel-braided high-pressure hose (10 m) NEW 25° power nozzle Water filter and GEKA-style quick-connect couplings – INCLUDED FREE OF CHARGE KEY FEATURES: Open oil system – no operating time restrictions Built-in chemical tank allows for the direct dispensing of cleaning agents through the machine Highly legible and intuitive control panel Simple design with easy access to internal components, making the machine user-friendly and straightforward to service Tank for RM110 water-softening agent prevents corrosion and scale buildup within the heating coil and other internal plumbing. Codpfx Aks Ah D U Rjtjhd

Condition: refurbished (used), Year of construction: 2014, operating hours: 617 h, functionality: fully functional, fuel type: electric, Hako Jonas / Sweepmaster B 980 R Fully reconditioned sweeper with new batteries, new drive wheel, 6-month warranty, and new DGUV V3 inspection including test report. Working width with side broom: 95 cm Main brush width: 70 cm Max. area performance: 5,800 sqm/h Container capacity: 60 L (2 x 30 L) Drive type: Battery Battery V/Ah: (24V) 4 x 6V 240Ah GEL Installed new parts / repairs carried out: - All drive belts replaced - New drive wheel - All bearings replaced - New GEL batteries Cedsyalv Aepfx Aktohd - New heavy-duty wheels - All rubber strips replaced - New cartridge filter - Sweeping unit drive motor completely overhauled - Drive motor completely overhauled incl. brand new drive wheel - Sweeping unit completely overhauled incl. new main brush and new side broom Additionally, we offer: Service, repairs, and sales for all common Hako models.

Condition: like new (used), Year of construction: 2014, operating hours: 100 h, functionality: fully functional, Equipment: documentation/manual, MAGIDO L160E – industrial parts washer | ALMOST UNUSED We offer for sale a professional industrial parts washer, the MAGIDO L160E, manufactured in Italy. The machine has been used very little, making it an attractive opportunity for a company looking for a high-performance machine without the need to invest in a new one. Csdpfxjz Ng Eno Aktshd The MAGIDO L160E is designed for the automatic washing and degreasing of large, heavy, and bulky parts. The parts are placed in a rotating basket and are intensively sprayed with heated cleaning solution during the working cycle. Key parameters: • Load capacity up to 700 kg • Basket dimensions approximately 1,100 × 1,100 mm • Usable height approximately 800 mm • Tank volume 350 liters • Maximum temperature 90 °C • Power consumption 27 kW • Power supply 400 V + N / 50 Hz • Machine weight 950 kg • Year of manufacture 2014 • Italian manufacturer MAGIDO Group • CE marking Ideal for cleaning engine blocks, gearboxes, castings, machine components, production components, and other large or heavy parts, removing oil, grease, and operational dirt. The main advantage of this machine: Despite being manufactured in 2014, the washer has been used only minimally – practically unused. Therefore, it is an attractive opportunity to acquire a professional industrial machine with a high load capacity at a significantly lower price compared to a new machine. Price: €14,999 excluding VAT Personal inspection is possible. If you are seriously interested, we will gladly provide further photos, information, or a video of the machine. MAGIDO L160E – 700 kg load capacity, professional industrial design, and minimal use.

Condition: like new (used), Year of construction: 2008, operating hours: 125 h, functionality: fully functional, Cold Jet Aero 75 DX Machine – Like New This machine is suitable for industrial cleaning applications, including both small and very large projects. A key advantage of this machine is that it does not rely on the latest generation of electronics. It is one of the most powerful machines on the market and is in excellent condition. Cold Jet Aero 75 DX Dry Ice Blasting Machine – Complete with the following equipment: COLD JET AERO 75 DX DRY ICE (125 HOURS OF USE) 1 x 20’ Blasting Hose 1 x Coldjet Applicator 2 x Nozzles – NEW One of the best machines in the world, with no electronics. This is what makes it reliable, and also keeps maintenance costs down. For inquiries or to arrange a viewing, please contact us at DrDryice. Csdpfx Ao Ad U Acoktehd All machines sold come with a 1-year warranty. We also offer repairs and maintenance for Cold Jet machines. We also supply new Cold Jet machines. Contact us for more information. Worldwide shipping available. Cold Jet dry ice machine for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, mold cleaning without disassembly, paint removal with dry ice, coating removal with dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high-pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice.