Used Degreasing for sale (84)

Condition: new, Year of construction: 2025, color: grey, overall weight: 12,500 kg, maximum load weight: 11,820 kg, empty load weight: 680 kg, loading space volume: 7 m³, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel structure Dsdpfx Afex Ni N Hsnskh Structure: Tipper container approx. 7m³ asymmetrical/open Tipper container 7 cbm open asymmetrical - old DIN Material quality: SJ235 (ST37-2) Floor plate / wall plates: 6 / 4 mm Tipper bearing: triple tipping bearing on one side - with warning markings - UVV sticker - container tested and approved according to UVV - Net or tarpaulin hooks all around - 4x mounting bolts - Mounting bolts and tipping bearing ST 52 - Corners reinforced inside and outside Container fully welded, degreased, blasted, primed inside and outside with alkyd base paint 40 µm and painted outside with alkyd resin paint 40 µm in RAL7016 anthracite gray ACCESSORIES INFORMATION WITHOUT GUARANTEE, changes, prior sale and Errors excepted! - .

Condition: new, Year of construction: 2025, color: grey, empty load weight: 860 kg, loading space volume: 10 m³, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel structure Structure: Tipper container approx. 10m³ asymmetrical/open Tipper container 10 cbm open asymmetrical - old DIN Material quality: SJ235 (ST37-2) Floor plate / wall plates: 6 / 4 mm Tipper bearing: triple tipping bearing on one side - with warning markings - UVV sticker - container tested and approved according to UVV - Net or tarpaulin hooks all around - 4x mounting bolts Dkodpfx Afsx Ni Rdsnjh - Mounting bolts and tipping bearing ST 52 - Corners reinforced inside and outside Container fully welded, degreased, blasted, primed inside and outside with alkyd base paint 40 µm and painted outside with alkyd resin paint 40 µm in RAL7016 anthracite gray ACCESSORIES INFORMATION WITHOUT GUARANTEE, changes, prior sale and errors excepted! - .

Condition: new, Year of construction: 2025, color: grey, overall weight: 18,000 kg, maximum load weight: 16,680 kg, empty load weight: 1,320 kg, loading space volume: 5 m³, loading space width: 2,300 mm, loading space length: 4,500 mm, loading space height: 500 mm, first registration: 12/2025, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors Body: Roll-off container with double-wing door, approx. 5 m³, ARCHIVE PHOTOS Roll-off container approx. 5 cbm open - DIN 30722-1 Capacity: approx. 5 cbm Internal dimensions (LxWxH): 4500x2300x500 mm Material quality: S235 Dkedpox H Tv Sofx Afnsh Floor/wall sheets: 5/3 mm Frame spacing: 750 mm Floor/side/frame connection: 45/45° Rear version: Double-wing door with S-hook lock Type: ABS-50/4.5/75 Exposed hook Incl. Warning markings, UVV sticker (DGUV), checklist (safety instructions) All containers are welded, degreased, blasted, primed inside and outside with alkyd primer 60 µm, and painted outside with alkyd resin paint 40 µm in RAL color shade 7016 ACCESSORY DETAILS WITHOUT WARRANTY, subject to changes, prior sale and errors!

Condition: new, Year of construction: 2025, color: grey, overall weight: 18,000 kg, maximum load weight: 16,680 kg, empty load weight: 1,320 kg, loading space volume: 5 m³, loading space width: 2,300 mm, loading space length: 4,500 mm, loading space height: 500 mm, first registration: 12/2025, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors Body: Roll-off container with double-wing door, approx. 5 m³, ARCHIVE PHOTOS Roll-off container approx. 5 cbm open - DIN 30722-1 Capacity: approx. 5 cbm Internal dimensions (LxWxH): 4500x2300x500 mm Material quality: S235 Floor/wall sheets: 5/3 mm Frame spacing: 750 mm Floor/side/frame connection: 45/45° Djdpjx H Tv Eofx Afnskh Rear version: Double-wing door with S-hook lock Type: ABS-50/4.5/75 Exposed hook Incl. Warning markings, UVV sticker (DGUV), checklist (safety instructions) All containers are welded, degreased, blasted, primed inside and outside with alkyd primer 60 µm, and painted outside with alkyd resin paint 40 µm in RAL color shade 7016 ACCESSORY DETAILS WITHOUT WARRANTY, subject to changes, prior sale and errors!

Condition: good (used), Year of construction: 2019, functionality: fully functional, total length: 1,650 mm, total width: 1,770 mm, total height: 1,580 mm, input voltage: 400 V, type of input current: three-phase, pressure: 5 bar, temperature: 75 °C, power: 15.4 kW (20.94 HP), maximum load weight: 350 kg, workpiece weight (max.): 350 kg, cage diameter: 1,100 mm, TRL 1100 - 2021 - € 8,500 Industrial washing machine for cleaning and degreasing workpieces using an alkaline cleaning agent. The machine is constructed entirely from stainless steel AISI 1.4301. Equipped with double walls with insulation in between. Rotating basket for parts, with spray nozzles for detergent above and below. Built-in filter for coarse contaminants. Fitted with a detergent pump and a drain pump to remove the used cleaning liquid. Level switches in the tank to detect fluid level. Monitoring of possible leaks. Control cabinet with digital temperature display. Cabinet fitted with a signal lamp for status indication. The machine is in very good condition and is ready for immediate use. Dkjdpowfdpmofx Afnsh

Condition: new, Year of construction: 2025, The XTON Smart Cleaner SC1000™ automatic basket washer is constructed from stainless steel AISI 304 and acid-resistant steel AISI 316. It is designed for use in various industrial and automotive applications. This washer is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned element. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner BA, which, combined with the appropriate temperature and pressure, easily removes all types of dirt. The machine operates in a closed-loop system at temperatures up to 80°C. Standard equipment includes a rotating basket with a diameter of 100 cm and a 300-liter tank, which can be optionally thermally insulated to protect the heated fluid from cooling too quickly. The Smart Cleaner SC1000™ ensures high cleaning quality, time and energy savings, as well as safe and convenient operation. It is designed for automatically removing dirt from cast iron, aluminum, and steel surfaces. The design and construction of the Smart Cleaner SC1000™ adhere to the highest quality standards ISO 9001 and environmental standards ISO 14001. EQUIPMENT: - Rotating basket with a diameter of 100 cm - Heated tank with a capacity of 300 liters - Dual liquid filtration system - Liquid level and temperature sensors - Oil separator - Adjustable feet with a height adjustment range of 100 mm - XTON Active Cleaner BA (5L starter pack) TECHNICAL PARAMETERS: - Weight: 200 kg - External dimensions - Open chamber (W x D x H): 150 x 120 x 250 cm - External dimensions - Closed chamber (W x D x H): 150 x 120 x 140 cm - Rotating basket diameter: 100 cm - Rotating basket load capacity: 300 kg - Work time programming range: 0 - 99 min - Washing/liquid temperature: up to 80°C - Heater power: 9 kW - Tank capacity: 300 L - Tank capacity to oil separator level: 200 L - Pump capacity: 250 L/min - Spray pressure: 4.5 - 6 bar - Power supply: 3 x 400 V - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 Dksdpfx Afsu R Urhonoh - Declaration of conformity: CE

Condition: new, Year of construction: 2025, The XTON Smart Cleaner SC850™ automatic basket washer is constructed from stainless steel AISI 304 and acid-resistant steel AISI 316. It is designed for use in various industrial and automotive applications. This washer is intended for degreasing and cleaning parts contaminated with oil or grease, without damaging the surface of the cleaned element. Cleaning efficiency is enhanced by our proprietary XPOWER Active Cleaner BA, which, combined with the appropriate temperature and pressure, easily removes all types of dirt. The machine operates in a closed-loop system at temperatures up to 80°C. Standard equipment includes a rotating basket with a diameter of 85 cm and a 250-liter tank, which can be optionally thermally insulated to protect the heated fluid from cooling too quickly. The Smart Cleaner SC850™ ensures high cleaning quality, time and energy savings, as well as safe and convenient operation. It is designed for automatically removing dirt from cast iron, aluminum, and steel surfaces. The design and construction of the Smart Cleaner SC850™ adhere to the highest quality standards ISO 9001 and environmental standards ISO 14001. EQUIPMENT: - Rotating basket with a diameter of 85 cm - Heated tank with a capacity of 250 liters - Dual liquid filtration system - Liquid level and temperature sensors - Oil separator - Adjustable feet with a height adjustment range of 100 mm - XTON Active Cleaner BA (5L starter pack) TECHNICAL PARAMETERS: - Weight: 180 kg - External dimensions - Open chamber (W x D x H): 135 x 110 x 195 cm - External dimensions - Closed chamber (W x D x H): 135 x 110 x 140 cm - Rotating basket diameter: 85 cm - Rotating basket load capacity: 300 kg - Work time programming range: 0 - 99 min - Washing/liquid temperature: up to 80°C - Heater power: 9 kW - Tank capacity: 250 L - Tank capacity to oil separator level: 200 L Dodpfx Aeu Srrhofnjkh - Pump capacity: 250 L/min - Spray pressure: 4.5 - 6 bar - Power supply: 3 x 400 V - Safety features: temperature sensor, emergency safety switch, limit switch - Safety rating: IP 54 - Declaration of conformity: CE

Condition: new, ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 4-6 weeks after receipt of payment! ✅✅✅Energy Class A+++✅✅✅ ✅ Plug & Play system – Delivered fully assembled, ready to use immediately! ✳️ Maintain your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. Djdpfx Afswdpq Hsnjkh ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ Innovative wet blasting technology for perfect surfaces – Efficient. Environmentally friendly. Safe. The future of surface finishing begins here: With wet blasting solutions from Proton Maschinenbau GmbH, you can rely on uncompromising quality, maximum occupational safety, and state-of-the-art technology. Whether manual or fully automated, our systems guarantee precise cleaning, effective deburring, and optimal preparation for coatings, painting, or further processing. Our wet blasting systems combine water, compressed air, and a suitable blasting media to create a highly effective cleaning process that offers clear advantages over conventional dry blasting: ✔ 100% dust-free operation thanks to the integrated jet pulse filter system ✔ Homogeneous, contamination-free surfaces – no chemical additives ✔ Gentle processing of sensitive materials without embedding blasting media ✔ Optimal results for degreasing, paint stripping, structuring, and cleaning ✔ Energy- and resource-efficient process, suitable for numerous blasting media ✔ Ideal for demanding industries such as aviation, medical technology, the automotive industry, or toolmaking Our portfolio includes, among others: 🔹 ST1 & ST5 – Compact manual wet blasting cabinets with precise foot pedal control 🔹 ST6 – Specialized machine for rim processing up to 26 inches 🔹 ST12 – Fully automatic drum system with recipe management and intelligent control 🔹 ST17 – Ergonomic system with rotating platform, wash basin, and transport trolley All machines feature: 🔧 Stainless steel housing with laser seam 🖥️ Intuitive PLC touch panel with programming and maintenance instructions 💡 LED interior lighting, safety features, and automated media return Areas of application: Cleaning aluminum or plastic molds, deburring precision parts, preparing implants or prototypes from additive manufacturing – we offer the right solution for every application. Proton stands for: 2-year warranty on manufacturing quality, 10-year spare parts availability, personalized consulting, and robust systems "Made in Germany." 👉 Discover the advantages of wet blasting technology now – and reach a new level of surface finishing.

Condition: new, ⭐⭐⭐⭐⭐ (5.0) ⚡️ Top Service ⚡️ Fast Delivery ⚡️ Great Support! ✈️ Plus shipping costs – Shipping available upon request.✈️ Fast delivery: Only 4-6 weeks after receipt of payment! Important note: If you would like to receive a quote for an automatic powder coating system, please use the powder coating system configurator on the homepage of our website. ✅✅✅Energy Class A+++✅✅✅ ➖➖➖➖➖ ✳️Maintain your liquidity! We offer a variety of financing models to ensure your investment has the greatest chance of success. Contact us today to learn more about our hire purchase, warranty, or leasing programs. ➖➖➖➖➖ ✨✨Buy directly from the manufacturer and secure the price and quality advantage!✨✨ Benefit from Proton's 40 years of experience in surface coating technologies. ➖➖➖➖➖ ☘️Environmentally friendly☘️⚡️Green energy⚡️☘️ ► Optimal adhesion begins with perfect preparation – Chemical pretreatment systems from PROTON◄ Dkodpfx Aokwct Uofnsh Before the paint can develop its full potential, the surface must be flawless. PROTON surface pretreatment systems ensure that every contaminant – be it oil, dirt, or oxide – is reliably removed. This is the only way to achieve lasting corrosion resistance and excellent paint adhesion. Each product requires a customized process. Whether alkaline or acid degreasing, iron or zinc phosphating, nanotechnology, or chrome-free processes – we develop customized solutions for your requirements. Our pretreatment systems – whether spray or immersion systems – offer you: ✳️ Maximum energy efficiency ✳️ Minimized chemical and water consumption ✳️ Precise process control with automatic dosing and pH monitoring ✳️ Durable construction made of chemical-resistant stainless steel or plastic Our promise: Customized technology for the highest demands Our experienced project team analyzes your production conditions in detail and recommends the optimally matched pretreatment system. We consider all crucial parameters – from heating power and water circulation to vapor deposition and chemical separation. The spray wash lines are seamlessly integrated into your conveyor system. All cleaning, rinsing, and drying processes are fully automated and efficient – ready for a perfect coating. Available systems: ✳️ Spray and dip pretreatment lines ✳️ Nanotechnology systems (e.g., Bonderite, Oxsilan) ✳️ Degreasing and pickling systems ✳️ Iron and zinc phosphating lines ✳️ Chromating and chrome-free systems PROTON – Technology that convinces. Experience that works. ⭐Follow us for new campaigns⭐ ☀️ 2-YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: new, Year of construction: 2025, color: grey, overall weight: 18,000 kg, maximum load weight: 16,680 kg, empty load weight: 1,320 kg, loading space volume: 5 m³, loading space width: 2,300 mm, loading space length: 4,500 mm, loading space height: 500 mm, first registration: 12/2025, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors Body: Roll-off container with double-wing door, approx. 5m³, ARCHIVE IMAGES - Roll-off container approx. 5 cbm open - DIN 30722-1 Capacity: approx. 5 cbm Dsdpox E Tg Uofx Afnskh Internal dimensions LxWxH: 4500x2300x500 mm Material quality: S235 Floor / wall thickness: 5/3 mm Frame spacing: 750 mm Floor/side/frame connection: 45/45° Rear variant: Double-wing door with S-hook lock Type: ABS-50/4.5/75 Free-standing hook Incl. warning markings, UVV badge (DGUV), checklist (safety instructions) All containers are welded, degreased, shot-blasted, primed inside and out with 60 μm alkyd primer, and outside painted with 40 μm alkyd resin paint in RAL 7016. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Condition: new, Year of construction: 2025, color: grey, overall weight: 18,000 kg, maximum load weight: 16,680 kg, empty load weight: 1,320 kg, loading space volume: 5 m³, loading space width: 2,300 mm, loading space length: 4,500 mm, loading space height: 500 mm, first registration: 12/2025, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, doors Body: Roll-off container with double-wing door, approx. 5 m³, ARCHIVE PHOTOS Roll-off container approx. 5 cbm open - DIN 30722-1 Capacity: approx. 5 cbm Internal dimensions (LxWxH): 4500x2300x500 mm Material quality: S235 Floor/wall sheets: 5/3 mm Frame spacing: 750 mm Floor/side/frame connection: 45/45° Rear version: Double-wing door with S-hook lock Type: ABS-50/4.5/75 Dkodpox E Thfjfx Afneh Exposed hook Incl. Warning markings, UVV sticker (DGUV), checklist (safety instructions) All containers are welded, degreased, blasted, primed inside and outside with alkyd primer 60 µm, and painted outside with alkyd resin paint 40 µm in RAL color shade 7016 ACCESSORY DETAILS WITHOUT WARRANTY, subject to changes, prior sale and errors!

Condition: new, Year of construction: 2025, color: red, overall weight: 14,745 kg, maximum load weight: 12,500 kg, empty load weight: 2,245 kg, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel superstructure, rear discharge Superstructure: Water tank roll-off container approx. 12,000 liters. ARCHIVE PHOTOS Water tank without platform approx. 12,000 liters – according to DIN 30722-1 - Clear internal dimensions (LxWxH): 5500 x 2394 x 1003 mm Dkodpfx Afex Avkbeneh - Material grade: S235 (St-37) - Floor / wall plates: Smooth floor plate thickness 5 mm, sides 3 mm, roof and rear wall 4 mm - At the rear bottom: 2x Storz A-connection with ball valve (4 inch) - At the rear top: 1x Storz B-connection with elbow and cap (2 inch) - At the front top hook: 1x Storz B-connection with elbow, coupling, and cap (2 inch) - Galvanized and bolted step ladder on the front wall; vent pipe - Frame made of INP180 - On the roof: one manhole, diameter 600 mm - Inside: 3 baffle walls, diameter 600 mm (large cavities) - Watertight (tested for leak tightness) - Greasable steel rollers Tanks welded, degreased, blasted, internally primed with epoxy Temabond ST 200 300 μm, externally primed with epoxy resin paint 60 μm and coated with 2K paint (polyurethane paint B7) 40 μm in RAL shade 3000 red Comes with UVV sticker (DGUV), checklist (safety instructions), and warning marking – watertight (tested for leak tightness) ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted.

Condition: new, Receiver capacity 2 x 37 l working pressure 4 - 8 bar Air consumption 170 - 500 l/min. weight of the machine ca. 36 Kg Dkedpfefv Au Ajx Afnjh 1020 x 460 x 520 mm Mobile beam unit (soda blasting) Consisting of: Nozzle set and moisture separator Boiler 2 x 37 liters Blasting gun with 2.5m supply hose Soda blasting can also be used to clean engine parts, degrease parts, remove graffiti, remove mold, and repair damage caused by fire.

Condition: used, Year of construction: 2010, Powder coating line from 2010, in excellent condition. Currently in use, available for inspection and testing. Maximum part size: L x W x H = 2600 x 400 x 1850 mm Equipment Technological conveyor Automatic speed V = 1.2 m/min Speed regulation from 0.5 to 2.5 m/min Preparation station MNA-3-LPG, total length 16.7 m Entry area: L = 2.5 m a. Washing, degreasing and phosphating: L = 3.6 m Number of spray frames – 10 Number of nozzles in the frame – 18 Total number of nozzles – 180 Pump capacity – 162 m³/h Pump power – 15 kW 4 m³ capacity for active liquid Internal heat exchanger with LPG burner – 160 kW Temperature – 50°C Mechanical oil separator Filtration system Dosing system with diaphragm pump and regulator Washing time – 3 min b. Drip zone L = 3.1 m Drip time – 2 min 30 sec c. First rinse L = 1.2 m Number of spray frames – 4 Number of nozzles in the frame – 18 Total number of nozzles – 64 Pump capacity – 38 m³/h Pump power – 3 kW 1.5 m³ water capacity Rinse time – 1 min d. Drip zone L = 3.1 m Drip time – 2 min 30 sec e. Fine rinse L = 1.28 m Number of spray frames – 3 Number of nozzles in the frame – 18 Total number of nozzles – 54 Pump capacity – 33 m³/h Dksdpfx Aov Ed Uksfneh 1.5 m³ water capacity Pump power – 3 kW Additional spray frame Rinse time – 1 min f. Drip zone L = 2 m Drip duration – 1 min 40 sec Three connections for the extraction system with three fans Working zone made of stainless steel Pipes made of PVC or stainless steel 1 pc. Automatic dryer after washing AST-1-KLPG: Dimensions of the working zone L x W x H = 7000 x 3000 x 2800 mm Air curtains on each side to reduce heat loss Indirect heat exchanger, heated by LPG, 200 kW Three fans, air supply 6000 m³/h Two connections for the extraction system Temperature sensor and regulator Overheating sensor Circulation sensor Working zone made of galvanized steel Thermal insulation 200 mm thick Drying time – 10 min 1 pc. Automatic polymerization oven APT-2-KLPG Working area dimensions L x W x H = 10200 x 3600 x 2800 mm Air curtains on one side to reduce heat loss Two indirect heat exchangers heated by LPG, each 300 kW Eight circulation fans, each with a capacity of 6000 m³/h Two connections for the exhaust system Temperature sensor and regulator Overheating sensor Circulation sensor Working area made of galvanized steel Thermal insulation 200 mm thick Polymerization time – 25 min 1 pc. Overhead rail transportation system for ATR paint shop: Straight rail with hangers L = 400 mm – 146 m Drive station – 2 pcs. Tension station – 1 pc. Chain lubrication station – 1 pc. Rail support structure drawings – 1 set.

Condition: new, Year of construction: 2025, color: red, gearing type: other, driver cabin: other, Vehicle location: inbound / in transit, steel body, rear discharge Structure: water tank roll-off container approx. 12,700 L. Roll-off container/water tank from approx. 6,000L to 13,000L The tank shown has a volume of approx. 12,700L - Internal clear dimensions LxWxH: 5,400 x 2,400 x 1,200 mm (tank 4,600mm, platform 800mm) - Material quality: S235 (St-37) - Floor sheet/wall sheets: smooth floor sheet thickness 5 mm, sides 3 mm - Forklift pockets at base of the container Dkodpolu Hrusfx Afneh - Rollers greasable - Top ventilation with cover/access hatch - Upper C-coupling with flap - Rear A-coupling with ball valve - Epoxy coating inside, 50 micron - Outside primed 40 micron and painted - Two internal baffle plates - Ladder on front wall right side - Additional C-coupling with ball valve, front, lower left on front wall Container is fully welded, degreased, blasted, primed inside with 50 µm epoxy coating, outside primed with 40 µm alkyd primer and painted with 40 µm alkyd resin in RAL color of your choice Delivery time: approx. 8–10 weeks Available from 6,000–13,000 liters, price depending on capacity between EUR 8,000.00 and approx. EUR 13,000.00 depending on volume Available with self-priming water pump, self-lubricating with separate drive motor, delivery rate: 129 m³/h (2,000 l/min), head: 17 m, particle size: 28 mm, fuel type: diesel, tank 4.3 liters, see 2907 at approx. EUR 4,000 extra charge! Available as roll-off container and tank. ACCESSORY INFORMATION WITHOUT WARRANTY. Subject to changes, prior sale, and errors!

Condition: ready for operation (used), functionality: fully functional, Ultrasonic Cleaner Paint Stripping Installation RAX-8 The solvent cleaning machine consists of 2 parts: 1) The ASD; a 4-tank ultrasonic cleaning and degreasing system Dkedpfxsw Ewl Uo Afnsh 2) The distillation column (still); a closed boiling tank with a vapor zone above it, including condensation and cooling coils. The condensate is continuously returned to tank 1 via a water separation system, and the contaminated BEVO thinner from tank 3 is automatically pumped out. Tank contents: Tank 1: 40.5 liter immersion tank temperature: 76°C-79°C Tank 2: 75 liter immersion tank temperature: 22°C-30°C Tank 3: 40.5 liter immersion tank (vapor tank) temperature: 77°C-82°C Tank 4 empty (evaporation/cooling) temperature: ambient temperature Distillation column max 60 liters temperature: 76°C-82°C The machine has been professionally connected by a certified electrician.

Condition: new, functionality: fully functional, Pretreatment system for wet chemical cleaning of workpieces to be coated - NEW - As a leading manufacturer of systems for surface technology, we offer you an almost limitless portfolio for powder coating applications. At our location in 47669 Wachtendonk, we put your individual needs into practice and produce your desired concept. Thanks to our own production for almost all components, we are flexible and can respond specifically to your requirements. With us, you not only get your ideal powder coating system - we also have comprehensive user expertise at your side to support you with all questions about surface technology. Every item offered here is manufactured especially for you. Regardless of whether it is a large or small project - we supply complete systems from a single source, according to your ideas. We look forward to hearing from you and implementing your ideas together! Here we offer you our newly manufactured VBH KM Pro pretreatment system for part dimensions of up to 4,000x1,400x2,000mm. System description: Pretreatment system for wet-chemical cleaning of workpieces before coating using the 3-zone process + nozzle line for loss. Equipment: -Washing stations for up to 2 traverses in one cleaning cycle -3 rails (1 middle, 2 side washing stations) -Washing ring with removable middle nozzle line (Info: The middle nozzle line is used when 2 rails with flat workpieces are to be cleaned at the same time; without the middle nozzle line, wider workpieces can be moved in and cleaned on the middle guide rail.) -4 washing zones (degreasing circuit, 1st rinse (pre-rinse) circuit, 2nd rinse (final rinse) demineralized water cascading to degreasing basin 1 -final spray ring (zone 4) for passivation in the no-rinse process when pulling out the goods carriers (duration of fogging adjustable) Passivation is injected into demineralized water. Inlet in basin 1. -2 storage containers made of stainless steel including level monitoring (sink 1 + demineralized sink) -1 stainless steel container insulated, as electrically heated, including level monitoring (degreasing) -Drain taps on the basins for disposal, cleaning and new preparation -Supply of the VE water requirement via mixed bed cartridges -Exhaust fan to remove the water vapor to the outside including exhaust pipe -Cabin made of stainless steel -Loading via double-wing door -Operating terminal (PLC controlled) outside the washing cabin -Control via PLC and touch display including remote maintenance module -Intuitive, illustrated operation for quick and easy handling Suitability: -particularly for flat workpieces, as the use of the central line means 2 product carriers can be cleaned at the same time -Frames and uncomplicated, open geometries up to a maximum of 1,000 mm wide can also be cleaned well Advantages: -Personnel-free, automatic cleaning, within approx. 20 minutes. Dkedotxcyispfx Afnjh -optimal adhesion properties especially for the subsequent coating -fully parameterizable process program from KM Industrieservice, thus completely flexible for changed chemical systems -lifetime support and spare parts availability from KM Industrieservice -cost-effective pretreatment solution with service life-optimized tank quality, thus also cost-effective wastewater disposal We can send you a video link to this system on request.

Condition: new, ELMAG WFM 210 Servodrive tool milling machine Incl. 3-axis position indicator Ready for operation: incl. oil filling, de-preserved (degreased), completely assembled and test run carried out. The milling machines in the Servodrive series combine precision and economy and make the heart of every metal technician beat faster. The top ergonomic combination impresses with easy handling, infinitely variable speed control and an excellent price-performance ratio and is ideal for workshops, training companies and toolmaking. Standard equipment: - Digital position indicator - 4 long milling arbors 16, 22, 27, 32 mm - 3 reduction sleeves MK 1, 2, 3 - Operating instructions / CE ADVANTAGES: Automatic feed and rapid traverse X/Y/Z - Milling capacity Ø 125 / 40 mm - Ball screw on all axes X/Y/Z - Stepless drives on all axes - Coolant tank integrated in the cast base - Digital 3-axis position display - Horizontal and vertical milling table - LED milling table lighting - With +/- 90° infinitely variable swivel vertical milling head incl. degree scale - Incl. adjustable drill sleeve - Incl. included central lubrication - Digital speed display of the milling spindle - Rapid traverse on all 3 axes - Tiltable milling head +/- 45° Swivel control panel - Digital position display for maximum precision on all 3 axes - Milling spindle right and left rotation - Digital speed display - Potentiometer for infinitely variable control of the feed axes - Inching switch for rapid traverse of the milling axes - Coolant pump off/on - Emergency stop button TECHNICAL DATA: Drilling capacity in steel 50 mm Milling capacity face milling cutter 125 mm Milling capacity end mill 40 mm Spindle holder (turning spindle) ISO 40 Speed range 40 - 2000 rpm Infinitely variable speed steps Quill stroke 65 mm Milling table grooves / width x distance 5 / 14 x 63 mm Vertical grooves / width x distance 3 / 14 x 63 mm Spindle projection 180 - 485 mm Milling head swivel range ± 45 ° Quill spacing table 50 - 450 mm Horizontal spindle distance table 145 - 545 mm Dodotw Akropfx Afnokh Milling table surface 750 x 320 mm Table travel X x Z 405 x 305 mm Vertical table surface 890 x 225 mm Feed rates X/Y/Z 10 - 1000 mm/min Feed steps X/Y/Z stepless Motor power 3700 W Torque X-axis 7.7 Nm Torque Y-axis 7.7 Nm Torque Z-axis 1.7 Nm Mains connection 400/50 V/Hz Cubature 750x320x450 mm Length x width 1500 x 1700 mm Height 2000 mm Weight 1450 kg

Condition: new, ELMAG INDUSTRIE 1000/230 HD Universal center lathe 88173 incl. RÖHM lathe chuck incl. 3-axis position indicator incl. quick-change steel holder 'Set', Multifix system Ready for operation: incl. oil filling, de-preserved (degreased), completely assembled and test run carried out Heavy lead and feed spindle lathes, 5,500 watts: The quality of the INDUSTRIE 230 HD models becomes clear as soon as you switch them on: barely audible drive noise. No vibrations at large cutting depths. In fact, at 2,635, 2,835 and 3,055 kg, the 230 HD models are the heaviest in their class and, thanks to their extremely robust design - e.g. high-frequency hardened prismatic guides - are ideally suited for heavy-duty and continuous operation. At 80 mm, the 230 HD offers an extra-large spindle bore for processing bar stock up to 2 1/2 inches in diameter (76.1 mm). A turning size via slides of Ø 290 x 1,000, 1,500 or 2,000 mm and a maximum turning diameter of 460 or 700 mm leave almost nothing to be desired for machine, steel, plant and tool construction - as well as 12 speeds for 170 longitudinal and cross feeds and 150 leadscrew pitches for metric and inch threads. Standard equipment: - including digital position indicator - RÖHM three-jaw lathe chuck Ø 250 mm - Four-jaw faceplate chuck Ø 315 mm - Clamping disk Ø 350 mm - 2 fixed centers - Rotating center point MK 5 - Moving steady rest - Steady rest - Quick-change steel holder set, 5-piece MB - Thread gauge - Halogen machine lamp - Emergency stop button / zero voltage release - Rotating chuck guard with safety switch - Underframe / chip tray / splashback - Tool kit / operating instructions / CE Special accessories: - Insert turning tool set 25 x 25 mm, 7-piece - 7-piece insert set for turning tool set 25 x 25 mm - Turning tool set 'Camlock' 25 x 25 mm, 7-piece - Cut-off tool holder 25 x 25 mm, length 150 mm - Cutter for cut-off tool holder 25 x 25 mm ADVANTAGES: - 'CE' compliant machines with maximum safety and machine accuracy in accordance with DIN - Powerful and robust for trade & industry - Coolant tank and pump integrated in the machine base TECHNICAL DATA: Center width 1000 mm Center height 230 mm Dsdpfxjtw Dxke Afnskh Turning diameter over bed 460 mm Turning diameter over slide 290 mm Turning diameter without bridge 700 mm Machine bed width 340 mm Bridge length 200 mm Cross slide travel 280 mm Top slide travel 100 mm Turning tool cross-section, max. 25x25 mm Lathe chuck holder D1 - 8 Spindle holder (turning spindle) MK 7 mm Spindle bore 80 mm Speed 25 - 1800 rpm Speed steps 12 Longitudinal feeds (170) 0.04 - 2.46 mm/rev Transverse feeds (170) 0.02 - 1.23 mm/rev Metric thread dimension (24) 0.5 - 20 mm metric modular thread (20) 0.25 - 10 mm Inch thread, threads G (61) 1-5 / 8 - 72 G/' Inch modular thread, threads G (45) 3-1 / 4 -96 G/' Lead screw pitch 6 mm Lead screw diameter 40 mm Quill holder MK 5 Quill diameter 75 mm Quill travel 130 mm Motor power 5500 W Coolant pump 40 W Mains connection 400/50 V/Hz Length (total) 2310 mm Height (total) 1255 mm Weight 2635 kg

Condition: new, ELMAG Universal lathe INDIVIDUAL 1000/200 - Vario incl. RÖHM lathe chuck incl. 3-axis position indicator incl. quick-change steel holder 'Set', Multifix system Ready for operation: incl. oil filling, de-preserved (degreased), completely assembled and test run carried out Individual 1000/200 The Individual is a compact center lathe for the individualist and is ideally suited for training and maintenance. With infinitely variable speed control and a digital speed display, the machine always allows the cutting speed to be precisely matched to the material. Thanks to its precision bearings and 850 kg weight, the machine runs particularly smoothly and is designed for demanding continuous operation. It enables the production of turned sizes using slides up to Ø 200 x 1,000 mm. The INDIVIDUAL 1000/200 is powered by a 2,400 watt motor, has infinitely variable speed adjustment from 45 - 2,500 rpm and 48 longitudinal and cross feeds. ADVANTAGES Coolant tank and pump integrated in the machine base Stepless speed adjustment incl. digital display LED lighting Automatic central lubrication Digital position indicator for 3 axes with color display Electromagnetic motor brake Large protective cover for a clean working environment TECHNICAL DATA Center width 1000 mm Center height 200 mm Turning diameter over bed 400 mm Turning diameter over slide 260 mm Turning diameter without bridge 560 mm Bridge length 235 mm Cross slide travel 175 mm Top slide travel 95 mm Turning tool cross-section, max. 25x25 mm Lathe chuck holder D1 - 5 Spindle holder (turning spindle) MK 5 mm Spindle bore 51 mm Speed 45 - 2500 rpm Infinitely variable speed steps Longitudinal feeds 0.043 - 0.653 mm/rev Transverse feeds 0.027 - 0.413 mm/rev Metric modular thread 0.4 - 7 mm Inch thread, threads G 4 - 56 G/' Inch modular thread, threads G 4 - 56 G/' Lead screw pitch 4 mm Lead screw diameter 22 mm Quill holder MK 3 Quill diameter 50 mm Quill travel 120 mm Motor power 2400 W Coolant pump 40 W Mains connection 400/50 V/Hz Length (total) 2114 mm Dkjdpfst Ef Hqsx Afnjh Width (total) 998 mm Height (total) 1700 mm Weight 850 kg

Condition: new, internal dimension 550 x 730 x 400 mm 0 185 l operating pressure 5-8 bar weight 50 kg dimensions 0,7 x 0,6 x 1,35 m Specification: Large lockable flap. Comfortable gloves. Multifunctional cleaning sprayer. LED lighting. Air blower. Readable pressure gauge. Adjustable air pressure regulator. Removable cleaning grid. Removable filter for dirt. Removable water collection tray. Internal dimensions (LxWxH) 550 x 730 x 400 mm Interior volume 185 l Operating pressure 5-8 bar Weight 50kg Dimensions L x W x H 0.7 x 0.6 x 1.35 m Since this parts cleaner has a thermostat that sets the degreaser to 50 Dkedpfsupxigsx Afnjh Degrees Celsius can heat up, it is advisable to use this degreasing cabin To be used in combination with the Eurol cold degreaser HF Plus. This degreaser has a higher flash point than the usual cold degreasers.

Condition: new, color: grey, overall weight: 10,000 kg, maximum load weight: 9,290 kg, empty load weight: 710 kg, loading space volume: 7 m³, gearing type: other, driver cabin: other, Vehicle location: inbound / in transit, steel body Body: skip container approx. 7 m³ asymmetric/open, skip container 7 cbm open asymmetric - old DIN Material quality: SJ235 (ST37-2) Floor plate / side plates: 6 / 4 mm Tipping bearings: triple, one-sided tipping bearing - with warning markings - UVV inspection label – Container tested and approved according to UVV - Continuous net or tarpaulin hooks - 4x mounting pins - Mounting pins and tipping bearings ST 52 - Corners reinforced inside and outside Dkodpfxovhiz Uo Afnsh Container fully welded, degreased, shot-blasted, primed inside and outside with 40 µm alkyd primer, and finished externally with 40 µm alkyd resin paint in RAL7016 anthracite grey Price per unit! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: new, color: grey, overall weight: 10,000 kg, loading space volume: 10 m³, gearing type: other, driver cabin: other, Vehicle location: inbound / in transit, steel body Body: approximately 10m³ open, asymmetric roll-off container - old DIN standard Material grade: SJ235 (ST37-2) Floor plate / wall plates: 6 / 4 mm Dedpfx Asvhi Afofnekh Tipping bearings: triple-sided, single-sided tipping bearings - with warning markings - UVV sticker – container inspected and approved according to accident prevention regulations (UVV) - Continuous net or tarpaulin hooks - 4x mounting bolts - Mounting bolts and tipping bearings made from ST 52 - Corners reinforced inside and outside Container fully welded, degreased, shot-blasted, primed inside and outside with 40 µm alkyd primer, and painted outside with 40 µm alkyd resin paint in RAL7016 anthracite grey Price per unit! ACCESSORY SPECIFICATIONS WITHOUT WARRANTY, subject to change, prior sale, and errors! -

Condition: excellent (used), Year of construction: 2019, TITANIUM PICKLING PLANT Comprises 16 tanks Dkedpfx Afoxa Dmlonoh Tank – Degreasing, large 1150 x 1000 x 1200/1250 mm Tank – Rinsing Tank – Hot rinse Tank – Etching Circulation pump 1 - Level probe; PTFE 1 - Temperature sensor 1 - Manual top-up DI water valve 1 - Manual lid 1 - Supports 2 Complete titanium pickling plant

Year of construction: 2018, condition: ready for operation (used), Gross volume: 90l, max. usable volume: 60l, max. filling weight: 175kg, drive type of the table: frequency-controlled electric gear motor, connected load table drive: 4kW, nominal speed table: 213/min, tilting drive type: hydraulic cylinder, tilting angle: 49°, max. tilting height when emptying: 2200mm, loader tilting drive type: hydraulic cylinder, tilting angle: 41°, max. tilting height when emptying: 2700mm, buffer drive type: electric unbalanced motor, drive power: 0.3kW, tilting drive type: hydraulic cylinder, tilting range: -25° to 12°, screening machine drive type: 2x electric unbalanced motor, drive power: 2x 0.25kW, media return chute drive type: electric unbalanced motor, drive power: 0.19kW, delivery rate hydraulic unit: 8.0l/min, operating pressure: 170bar, drive power pump motor: 3kW, tank volume: 30l, valve voltage: G24, length: 2812mm, width: 2094mm, operating hours: 14,021h, motor running hours: 427h. Application areas: edge rounding, coarse and fine grinding, descaling, degreasing, shining, polishing, deburring, cleaning. With documentation, an on-site inspection is possible. Dkedpfx Asw S Tymefneh