Used Wagner Finish for sale (95)

Condition: used, inner dimension height: 1,950 mm, inner dimension width: 1,850 mm, No. 3230 Complete paint shop Wagner Rafi / Wildcat / Finish 104 B Ex Used Complete spray room equipment Spray wall Rafi mobile 1850 x 1950 mm width x height 2 drying trolleys 1 spray gun Wagner Wildcat / IceBreaker motor / pump type 18 - 40 1 Wagner Finish 104 B Ex sprayer Sale by customer order, ex location near 69124 Heidelberg, without dismantling, without transport and assembly Dismantling, loading and transportation by us optionally possible Errors in description and price reserved To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical information, description of condition, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Fjdpfxjwn Tvuj Agdeft Terms of delivery: ex location

Condition: used, Year of construction: 2010, Powder coating line from 2010, in excellent condition. Currently in use, available for inspection and testing. Maximum part size: L x W x H = 2600 x 400 x 1850 mm Equipment Technological conveyor Automatic speed V = 1.2 m/min Speed regulation from 0.5 to 2.5 m/min Preparation station MNA-3-LPG, total length 16.7 m Entry area: L = 2.5 m a. Washing, degreasing and phosphating: L = 3.6 m Number of spray frames – 10 Number of nozzles in the frame – 18 Total number of nozzles – 180 Pump capacity – 162 m³/h Pump power – 15 kW 4 m³ capacity for active liquid Internal heat exchanger with LPG burner – 160 kW Temperature – 50°C Mechanical oil separator Filtration system Dosing system with diaphragm pump and regulator Washing time – 3 min b. Drip zone L = 3.1 m Drip time – 2 min 30 sec c. First rinse L = 1.2 m Fedpfev Ed Ukex Agdoft Number of spray frames – 4 Number of nozzles in the frame – 18 Total number of nozzles – 64 Pump capacity – 38 m³/h Pump power – 3 kW 1.5 m³ water capacity Rinse time – 1 min d. Drip zone L = 3.1 m Drip time – 2 min 30 sec e. Fine rinse L = 1.28 m Number of spray frames – 3 Number of nozzles in the frame – 18 Total number of nozzles – 54 Pump capacity – 33 m³/h 1.5 m³ water capacity Pump power – 3 kW Additional spray frame Rinse time – 1 min f. Drip zone L = 2 m Drip duration – 1 min 40 sec Three connections for the extraction system with three fans Working zone made of stainless steel Pipes made of PVC or stainless steel 1 pc. Automatic dryer after washing AST-1-KLPG: Dimensions of the working zone L x W x H = 7000 x 3000 x 2800 mm Air curtains on each side to reduce heat loss Indirect heat exchanger, heated by LPG, 200 kW Three fans, air supply 6000 m³/h Two connections for the extraction system Temperature sensor and regulator Overheating sensor Circulation sensor Working zone made of galvanized steel Thermal insulation 200 mm thick Drying time – 10 min 1 pc. Automatic polymerization oven APT-2-KLPG Working area dimensions L x W x H = 10200 x 3600 x 2800 mm Air curtains on one side to reduce heat loss Two indirect heat exchangers heated by LPG, each 300 kW Eight circulation fans, each with a capacity of 6000 m³/h Two connections for the exhaust system Temperature sensor and regulator Overheating sensor Circulation sensor Working area made of galvanized steel Thermal insulation 200 mm thick Polymerization time – 25 min 1 pc. Overhead rail transportation system for ATR paint shop: Straight rail with hangers L = 400 mm – 146 m Drive station – 2 pcs. Tension station – 1 pc. Chain lubrication station – 1 pc. Rail support structure drawings – 1 set.

Condition: used, Year of construction: 1986, total height: 1,900 mm, total length: 2,300 mm, total width: 2,200 mm, Empty weight: 2.000 kg - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 86721 - Drive system: Conventional - Power [kW]: 1.5 - X-axis travel [mm]: 700 - Y-axis travel [mm]: 400 - Z-axis travel [mm]: 400 - Table width [mm]: 900 - Table depth [mm]: 350 - Magnet width [mm]: 350 - Magnet depth [mm]: 700 - Max. grinding wheel diameter [mm]: 250 - Motor power: 1.5kW - Transport dimensions: 2300mm x 2200mm x 1900mm (l x w x h) Fsdpfx Aow E If Esgdjft - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2014, x-travel 1300 mm y-travel 500 mm z-travel 570 mm spindle taper SK40 spindle turning speed - stepless 60 - 6000 U/min rapid traverse x/y/z 7,5 m/min Number of tools 16 St. table surface area 1500 x 400 mm workpiece weight 700 kg total power requirement 12 kW weight of the machine ca. 4100 kg dimensions of the machine ca. 3800 x 3800 x 2800 mm - SIEMENS control SINUMERIK 828D - automatic tool clamping - Cooling device Ffedott Tdmepfx Agdot - automatic central lubrication - Chip tray - Full enclosure - Operation manual

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: 180991_03, This is a Wagner spot welding machine TYPE: 0281000-110A-AC with FELDPAUSCH nut and bolt feeder YEAR OF MANUFACTURE: 2019 Supply voltage: 40V Rated frequency: 50HZ Secondary current max: 17kA Fedpfxovgd Efs Agdeft Rated power at 20% ED: 110 kVA Welding force: 1 KN at 1 bar Max. operating pressure: 10bar FELDPAUSCH nut and bolt feeder TYPE: MSV 08

Condition: new, Year of construction: 2026, Pneumatic double diaphragm pump Cobra 40 -10 Its unique design allows low pulsation operation Uniform ink flow for perfect spray and highest surface quality Ideal for processing shear and moisture sensitive materials Minimal shear forces - ideal for processing e.g. UV varnishes Ideal for processing small quantities of material and for frequent colour changes Scope of delivery: Basic unit on stand, HD double hose 7,5m, upper container 5l Ex, AirCoat gun AC 4600 Professional including red air cap and holder, Air Coat nozzle ACF 3000 11/40 Technical data: Conversion ratio: 40:1 Volume flow per double stroke: 10 cm3 Fsdpfobuqn Hex Agdsft Flow rate at 200 double strokes: 2 l/min max. Operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg At a special price - immediately available

Condition: good (used), Airless sprayer, painting device, spray pack, paint sprayer, paint spray system, paint pump, electrostatic sprayer, airless complete system, pneumatic piston pumps, airless high-pressure pump, air motor, AIR MOTOR -Manufacturer: Wagner, Airless sprayer type: 33-70 with transport trolley and spray gun -Material flow: max. 12.6 l/min Ffedpfew U T Atex Agdot -Air inlet pressure: max. 8 bar, operating pressure max. 264 bar -Individual components: see photos -Dimensions: 830/680/H1140 mm -Weight: 50 kg

Year of construction: 2015, condition: ready for operation (used), General Data Measurements width 1730 mm Measurements depth 4000 mm Measurements height 1930 mm Machine weight 3500 kg Additional Equipment Accessories include a balancing device and diamond grinding wheel. Further technical specifications are available in the PDF. Ffsdpox Nr Swofx Agdet This Chevalier FSG 1640 AD III was manufactured in 2015. It features a grinding length of 1000 mm, height of 370 mm, and a magnetic plate size of 1000 x 400 mm. The grinding wheel measures 355 x 30 x 127 mm with a speed of 1750 rpm. Weighing approximately 3500 kg, its dimensions are 4000 x 1730 x 1930 mm. Contact us for more information about this machine. Application Types Grinding

Condition: used, Year of construction: 2008, total height: 2,750 mm, total length: 2,900 mm, total width: 2,400 mm, Empty weight: 8.500 kg Price: On request - Year: 2008 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: MB116360 - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Siemens - Number of axes [pcs]: 3 - X-axis travel [mm]: 1100 - Y-axis travel [mm]: 650 - Z-axis travel [mm]: 600 - Table length [mm]: 1300 - Table width [mm]: 650 - Tool holder: SK40 - Max. spindle speed [rpm]: 8000 - Options: Chip collection tray, Chip conveyor, External cooling, Tool magazine, Machine-vice - └ Tool magazine [pcs.]: 24 - Transport dimensions: 2900mm x 2400mm x 2750mm (l x w x h) - Transport weight [kg]: 8500kg - Transport packages [pcs.]: 1 Fjdpfjxta Nijx Agdeft Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC machining center Wagner WMC 1800 (2013) Manufacturer: Wagner Model: WMC 1800 Year of manufacture: 2013 Siemens 828 control Fedpfx Aew S Hrvsgdsft Condition: good, used, currently in production X-travel: 1800 mm Y-travel: 900 mm Z-travel: 700 mm Tool holder: SK40 Through-spindle coolant (IKZ) 25 bar with belt filter system Tool measuring system Handwheel Without tools

Condition: used, length 1200 mm width 500 mm floor-plate height 105 mm Ffjdpetq I Rqofx Agdjt weight of the machine ca. 400 kg Electric magnetic plate from WAGNER, a transformer is required for operation / Rectifier required. 110 volts, 2.86 amps. Reduced special price. Machine dealer with own stock of 1600 m².

Condition: ready for operation (used), Year of construction: 2017, Gebr. Wagner Puma 28-40 Airless Year of manufacture: 2017 Wagner 28-40, air-operated piston pump with AirCoat equipment – used This unit is pre-owned Technical details Fsdpfx Agox N E Tzsdsft Pressure ratio: 28:1 Max. air inlet pressure: 8 bar Max. output: 2.4 l/min Max. pressure: 224 bar Max. nozzle size: 0.023" Scope of delivery Wagner Puma 28-40 AC with wall bracket on pallet truck 7.5m material hose DN4, 250 bar Wagner spray gun Nozzle The unit is suitable, among other applications, for processing the following materials: Clear coats Paints Glazes Stains Fillers Acrylic paint

Condition: used, Weinig / Wagner one-handed hydraulic grease gun with manometer for hydraulic clamps. Manufacturer Part No.: 00309102 Ffedpfxjxu H Tds Agdst

Year of construction: 1980, condition: good (used), Movable clamping table make WAGNER type: FE4000 year 1980 Travel : 4 000 mm table surface : 4000 mm X 1400 mm Feed rate : 8 - 2500 mm/min Rapid traverse : 4 m/min load capacity. Max : 12 500 kg Weight : approx. 12 000 kg Ffjdpog Uf I Ajfx Agdst In good condition. Hydr.clamping and worm drive

Condition: used, Year of construction: 2021, turning diameter over cross slide: 440 mm, turning diameter: 680 mm, center height: 340 mm, turning length: 3,000 mm, total length: 4,700 mm, total height: 1,450 mm, spindle speed (min.): 1,000 rpm, metric thread diameter (min.): 14 mm, bed width: 458 mm, rotational speed (max.): 1,000 rpm, rotational speed (min.): 12 rpm, type of input current: three-phase, swing diameter over bed slide: 680 mm, overall weight: 4,500 kg, quill mount: MK 6, spindle mount: MK 6, center height over top slide: 220 mm, EQUIPMENT of the used machine Machine No. WAG-C1-188 year of construction 2021 STANDARD EQUIPMENT : - Complete electrical equipment 400 V. / 50 Hz. - Chuck protection electrically fused - Quadruple tool holder or optional Quick change tool holder (Multifix system) - Rapid traverse in X and Z axis - Fixed steady rest - Moving steady rest - Complete coolant system - Spindle brake - Rear chip guard - Machine light - Operating tool and instruction manual - CE standard Additional equipment of the used machine - Three-axis digital display Article 601233 - 3-jaw chuck diameter 400 mm - Faceplate diameter 500 mm - Fixed steady rest 70 - 250 mm - Fixed steady rest 150 - 380 mm Quill ends adapted for sliding inserts Article 601223 - Quick change tool holder head Multifix size C Article 605934 TECHNICAL DATA center height 340 mm Swing over bed 680 mm Swing diameter over cross slide 440 mm center width 3000 mm Fsdpfx Agsw Rpd Eodjft spindle bore 105 mm (option 155 mm) spindle nose ASA A1-11 (D-11) Number of spindle revolutions 12 spindle speed 12 - 1000 rpm. (opt. 10 -800 rpm for KK 15) Longitudinal feeds 0.05 - 0.7 mm/rev. transverse feeds 0.025 - 0.035 mm/rev. Bed width 458 mm cross travel 390 mm Top slide travel 255 mm Thread pitches: metric 0.8 - 14 mm Withworth Gg/1" 2 - 28 Module, mod. 0.5 - 7 Diametral Pitch, DP 4 - 56 Lead screw dia. 105 mm Number of stages 28 Tailstock quill MK6 Drive power 11,25 kW (opt. 15 kW) Transport dimensions 4700 x 1240 x 1450 mm weight 4500 kg Transport costs on request. You have the possibility to visit the offered machine in our demonstration center Renchen, by appointment.

Condition: ready for operation (used), Year of construction: 2021, General Data Measurements width 1700 mm Measurements height 2240 mm Ffodpsx D Nu Njfx Agdjt Machine weight 3500 kg Measurements depth 2100 mm Control Unit Brand SIEMENS Model SINUMERIK 828D Main Drive Spindle speed range 80 – 10000 rpm Tool taper SK 40 Movement X-Axis Movement 600 mm X-Axis Feed Force 10000 mm/min X-Axis Rapid Traverse 24000 mm/min Y-Axis Movement 400 mm Y-Axis Feed Force 10000 mm/min Y-Axis Rapid Traverse 24000 mm/min Z-Axis Movement 450 mm Z-Axis Feed Force 10000 mm/min Z-Axis Rapid Traverse 20000 mm/min Additional Equipment Rigid cast-iron frame construction Linear guides on all three axes Automatic double-arm tool changer (16 stations) Complete coolant system Central automatic lubrication Air blast system for spindle cleaning Machine enclosure with doors Machine and signal lights Documentation in English CE-certified This 3-axis WAGNER WMC 600 L was manufactured in 2021, featuring a robust cast-iron frame and linear guides on all axes. It includes a Siemens 828 Basic ShopMill, an automatic double-arm tool changer with 16 stations, and a complete coolant system. The spindle supports speeds up to 10,000 rpm with a power of 11 kW. If you are looking to get high-quality milling capabilities consider the WAGNER WMC 600 L machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2016, machine/vehicle number: 24-16-0009, Offer 25391 Technical Data: - Automatic cutting cycle, hydraulic lifting/lowering of the saw frame - Manual miter adjustment with manual clamping - Saw blade dimensions: 6040 x 41 x 1.3 mm - Cutting speed, steplessly adjustable: 20 – 90 m/min - Cutting pressure regulation, stepless: 10 – 15 bar - Lowering speed: 0 – 300 mm/min - Cutting range: 30° – 90° - at 90° round: 500 mm Ffodpsx Eku Njfx Agdst - rectangular/flat: 620 x 450 mm - at 45° round: 450 mm - square: 430 x 430 mm - at 30° square: 310 x 310 mm - Hydraulic material clamping - Coolant system - Discharge roller conveyor with length stop, 4000 mm - Infeed roller conveyor: 4000 mm - Drive: 400 V / 4 kW - Required space approx. W 1700 x H 1700 x D 3000 mm - Weight approx. 1600 kg

Condition: ready for operation (used), Year of construction: 2016, Gebr. Wagner Piston Pump Leopard 35-70 - Spraypack Airless -+ Year of manufacture: 2016 Technical data: Transmission ratio: 35:1 Max. air inlet pressure: 7.1 bar Max. working pressure: 250 bar Displacement per double stroke: 70 cm³ Fsdpex N E Sqjfx Agdjft Max. stroke rate: 60 DH/min Max. delivery rate: 4.2 l/min Air consumption at 6 bar per double stroke: 18.6 nl - immediately available -

Year of construction: 2002, condition: ready for operation (used), General Data Measurements height 2200 mm Main Drive Spindle Speed 1200 RPM Spindle motor power 9 kW Control Unit Brand SIEMENS Dimensions Machine Length 4660 mm This WAGNER FCL 3280 was manufactured in 2002. It features a spindle bore of 134 mm and a spindle speed range up to 1200 rpm. The machine supports a maximum workpiece weight of 1800 kg with tailstock and steady rest. It offers rapid traverse rates of 10,000 mm/min for both Z and X axes. If you are looking to get high-quality turning capabilities, consider the WAGNER FCL 3280 machine we have for sale. Contact us for more information. Application Types Turning Ffsdpfx Aex D Dpnsgdet

Condition: good (used), Year of construction: 2017, machine/vehicle number: N 16601, Offer 25387 Technical Data: - Drilling capacity in steel: 60 mm - Drill spindle taper: MT 5 - Drill spindle stroke: 300 mm - Digital positioning display for stroke and position - Radius (throat): 1600 mm - Column diameter: 350 mm - Max. distance spindle – base plate: 350 – 1650 mm - Vertical travel of the arm: 1250 mm - Spindle speeds, stepless: 30 – 1500 rpm - Feeds, stepless: 1 – 600 mm/rev - Drive: 400 V / 8.9 kVA - 2 x cube tables - Coolant system - Required floor space approx.: W 2490 x H 2980 x D 1060 mm - Weight approx.: 3800 kg Fedsx Ei D Aspfx Agdoft

Condition: excellent (used), Year of construction: 2020, Pneumatic Double Diaphragm Pump Cobra 40-10 Top condition – Year of manufacture: 2020 Its unique design enables low-pulsation operation. Consistent paint flow for a perfect spray pattern and highest surface quality. Ideally suited for processing shear-sensitive and moisture-sensitive materials. Minimal shear forces – ideal for processing, e.g., UV coatings. Ideal for handling small material volumes and frequent color changes. Fsdpfx Agexdtkuedjft Scope of delivery: Basic unit on frame, HD double hose 7.5 m, upper container 5 l Ex, AirCoat spray gun AC 4600 Professional including red air cap and holder, AirCoat nozzle ACF 3000 11/40. Technical Data: Ratio: 40:1 Displacement per double stroke: 10 cm³ Flow rate at 200 double strokes: 2 l/min Max. operating pressure: 250 bar Weight: 23 kg Location: 54634 Bitburg Extremely low hours of use –

Year of construction: 2011, condition: ready for operation (used), overall weight: 7,300 kg, total height: 3,245 mm, spindle motor power: 5,500 W, product length (max.): 3,080 mm, General Data Machine weight 7300 kg Measurements height 3245 mm Dimensions Machine Length 3080 mm Main Drive Spindle motor power 5.5 kW This WAGNER PRC 60 was manufactured in 2011. It features a drilling capacity in steel of 60 mm, a table size of 630 × 800 mm, and a spindle taper of MK 5. The machine includes a spindle travel of 400 mm and a reach of 400 – 2000 mm. With a column diameter of 450 mm and a vertical arm adjustment of 800 mm, it's robust and versatile. Contact us for more information about this machine. Ffedpfsx D Ilajx Agdot Application Types Other Machine Tools

Year of construction: 2021, condition: ready for operation (used), General Data Measurements width 1600 mm Measurements depth 3400 mm Measurements height 2100 mm Machine weight 5000 kg Control Unit Brand SIEMENS Model SINUMERIK 8287D Main Drive Spindle speed range 20 – 2200 Spindle motor power 15 kW Spindle bore 81 mm Number of axis 2 Movement X-Axis Movement 280 mm Z-Axis Movement 1435 mm Workpiece Workpiece drm over bed 500 mm Workpiece drm over support 260 mm Tail Stock Pinol diameter 75 mm Pinol tool taper MK 5 This Wagner WDE 500 PLUS was manufactured in 2021. It features a max turning diameter over bed of 500 mm and a spindle speed range up to 2200 rpm. Equipped with Siemens 828 B-T control for enhanced precision and a spindle motor power of 15 kW. Ideal for robust turning operations. Machine dimensions are 3400 × 1600 × 2100 mm, weighing approximately 5000 kg. For more information about this machine, please reach out to us. Application Types Turning Fodex D Nuvopfx Agdsft

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand SIEMENS Model Sinumerik Movement X-Axis Movement 1400 mm Z-Axis Movement 600 mm Y-Axis Movement 700 mm Fodox D Elwopfx Agdoft This 4-axis WAGNER VMC 1400 was manufactured in 2007. It features a spindle power of 28 kW, maximum spindle torque of 230 Nm, and a spindle speed up to 4000 rpm. It includes a 4th axis for machining workpieces up to 1100 mm. Ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling

Year of construction: 2007, condition: ready for operation (used), General Data Measurements width 1470 mm Measurements depth 3230 mm Measurements height 1730 mm Machine weight 3000 kg Control Unit Brand SIEMENS Model SINUMERIK 802Ç Fsdpfxjx D Rfis Agdsft Main Drive Spindle motor power 7.5 kW Number of axis 2 Movement X-Axis Movement 295 Z-Axis Movement 1435 This WAGNER WDE 500 was manufactured in 2007. A robust horizontal turning machine, it offers reliable performance for various machining tasks. Consider the opportunity to buy this WAGNER WDE 500 horizontal turning machine. Contact us for more information. Application Types Turning