Used Heesemann Mfa 6 for sale (36)

Condition: used, Abrasive belt length 1st unit: 2,150 mm Max. working width: 1,300 mm Number of belts: 3 Belt 1st unit: cross belt Design 1st unit: cross belt Sanding pad 1st unit: electronic segmented pad Abrasive belt width 1st unit: 150 x 4,800 mm Drive 1st unit: kW 2nd unit: longitudinal roller Design 2nd unit: steel calibration roller Abrasive belt length 2nd unit: 2,150 mm Abrasive belt width 2nd unit: 1,350 mm Abrasive belt speed 2nd unit: 18 m/sec 3rd unit: pad unit Design 3rd roller: electronic segmented pressure beam SDS system Sanding pad 3rd unit: electronic segmented, 32 mm width Abrasive belt length 3rd unit: 2,150 mm Abrasive belt width 3rd unit: 1,350 mm Suitable for lacquer sanding: yes Belt air blast: yes Vacuum conveyor: yes Feed speed, fixed: stepless 5 – 15 m/min Control: screen control Electrical/pneumatic belt oscillation: electrical Infeed height: variable (lower table moves) Table height adjustment: electric motor Table height display: digital Working height / feed table height: 880 mm Gjdpfx Aoxzi S Neftsca Location: Supplier

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 2007.10.191, with Heesemann dust extraction machine, type: EA 8 Grinding width: 1350 mm Workpiece height: 3 – 150 mm Gcedpfx Asv Enzueftja Units: 3 x cross grinding units, each 15 kW; 1 x longitudinal grinding unit with pressure lamella belt 15 kW; 1 x brush roller unit 0.75 kW; Total power connection: approx. 80 kW Total air requirement: 193.5 m³/min

Condition: used, 2 belt cross sander Heesemann MFA 8 for intermediate sanding of varnish and sanding of wood panels and other workpieces. working width: 1300 mm Clearance height: max. approx. 140 mm clearance height: max. approx. 140 mm Gsdpexr N I Esfx Aftoca Aggregate 1: cross-section Unit 1: Electronic print bar Aggregate 2: longitudinal grinding Unit 2: Cross-section Unit 3: longitudinal grind Unit 4: cleaning brush

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, VERY WELL-MAINTAINED MULTIPURPOSE SURFACE SANDING AUTOMATON WITH CROSS AND LONGITUDINAL BELT; SUITABLE FOR WOOD CALIBRATION SANDING, WOOD SURFACE SANDING, AS WELL AS INTERMEDIATE COAT SANDING. Maximum working width: 1,300 mm Conveyor belt with vacuum system Conveyor extraction unit with pressure regulator Feed motor: 1.5 kW Feed speed: 3 - 15 m/min CSD – computer-controlled selective pressure regulation technology with 2 mm tolerance compensation Distance between control rollers: 16 mm Pressure shoe spacing: 48 mm Switch spacing: 82 mm Unit configuration: 1) Cross sanding unit Belt dimensions with lamella intermediate belt Abrasive belt dimensions: 15 x 4,800 mm Abrasive belt speed continuously variable, therefore suitable for surface and lacquer sanding 2) Longitudinal sanding unit with combined sanding roller and sanding shoe, hence suitable for both calibration sanding as well as wood and veneer surface sanding Abrasive belt speed continuously variable, therefore also suitable for lacquer sanding Abrasive belt dimensions: 1,350 x 2,620 mm Control: Gcodpsxrdk Uofx Aftsa Machine operation control on the right-hand machine side Up to 20 programs storable Transport dimensions: 2.4 x 2.2 x 2.35 m Weight approx. 5.4 t Large selection of sanding belts included

Year of construction: 1997, condition: good (used), - Working width (mm): 1300 - CSD system - Cross sanding unit - Longitudinal sanding unit - Shoe - Brush unit Gcsdpfxsidi Ivo Aftoa - Ionization

Condition: used, Year of construction: 1993, functionality: fully functional, grinding width: 1,350 mm, grinding height: 150 mm, working height: 150 mm, height adjustment type: electric, workpiece height (max.): 150 mm, - Very good condition - Year of manufacture: 1993 - Electronic PLC control: Heesemann - Model / Type: LSM 6 TECHNICAL PARAMETERS: - Working sanding width: 1350 mm - Max. thickness of workpieces: 150 mm MACHINE CONFIGURATION: I – Cross sanding unit (sergeant type) with sequential electronic pressure - Main motor: 13 kW - Pneumatic photo sensor oscillation - Extraction port: 1 x 180 mm Gcodpjw H Sk Tofx Aftsa - Sanding belt size: 5480 x 150 mm II – Combination unit with pad - Main motor: 13 kW - Belt cleaning system with oscillation - Pneumatic pad pressure - Pneumatic photo sensor oscillation - Extraction port: 1 x 180 mm - Sanding belt size: 2620 x 1350 mm - PNEUMATIC PHOTO SENSOR OSCILLATION - Pneumatic bar cleaning system with oscillation for cleaning belts III – Combination unit with pad - Main motor: 13 kW - Sanding belt cleaning system - Pneumatic pad pressure - Extraction port: 1 x 180 mm - Sanding belt size: 2620 x 1350 mm IV – Cleaning brush unit for workpiece behind the main unit at the outfeed - Motor: 1.1 kW - Extraction port: 1 x 140 mm - Feed regulated by gear motor: 4 kW feed motor - Feed speed: 6–26 m/min - Air requirement: approx. 28 m/sec, 4340 m³/h - Compressed air consumption: approx. 800 l/min - Feed belt: 5-segment - Pneumatic feed belt cleaning system - Automatic sanding height adjustment with electronic display - Motor: 0.55 kW - Suitable for sanding lacquer and intermediate sanding between coats - Dimensions (LxWxH): 3750 x 3230 x 2300 mm - Weight: approx. 8000 kg

Year of construction: 2022, condition: new, 1 HEESEMANN Demo Multi-purpose surface sanding machine Year of construction 2022 Working from the top – Sanding width 1,600 mm ROLLER/LONGITUDINAL/DB-S 1 construction with transport bed Gcodpfxemqma He Aftsa Continuous transport carpet, transport belt cleaning device, variable feed speed 5 - 25 m/min, constant working height 880 mm, machine upper part motorically adjustable according to panel thickness (3 - 150 mm), including integrated control cabinets. 1 Pressure roller (Ø 70 mm) 1 Industrial PC 21,5” Full HD Program memory for 1000 programs 1 Longitudinal sanding unit with contact roller for calibration work (steel) Diameter: 250 mm Sanding belt dimensions: 2,620 x 1,650 mm Belt speed: 24 m/s Drive power: 30 kW 1 Longitudinal sanding unit with pressure segment belt Sanding belt dimensions: 2,620 x 1,650 mm Belt speeds: 1.8 - 9 m/s (with pressure lamella belt) 1.8 - 18 m/s (without pressure lamella belt) Drive power: 22 kW frequency converter Continuous adjustment of sanding belt speeds 1 Pressure beam with computer-controlled selective pressure regulation - CSD® system 1 Rotating disc brush unit DB-S 12 driven disc brushes, operating in 2 directions of rotation. 1 Brush roller unit Panel clamping system For the secure transportation of panels shorter than 500 mm in the feed direction, including an integrated fan. 1 Panel blasting device with rotating compressed air nozzles

Condition: good (used), Year of construction: 1994, functionality: fully functional, total width: 2,150 mm, total height: 2,250 mm, total length: 2,300 mm, grinding width: 1,300 mm, overall weight: 4,500 kg, power: 41 kW (55.74 HP), Wide Belt Sander The MFA 8 multi-purpose surface sander is used for sanding flat wood materials and/or painted flat wood materials. The sanding width is 1300 mm, the working height is a constant 880 mm. The maximum workpiece clearance is 140 mm. The machine is equipped with cross- and longitudinal sanding units and a brush roller. All sanding units are equipped with intermittent sanding belt blasting. Sanding width: 1300 mm Motors: 41 kW 3 units (cross-sanding unit, sanding pad unit, and brush roller) digital and pneumatic control Gcedpowlq Ntsfx Aftja

Condition: like new (used), Sanding width mm: 1350, Sanding hight mm: 80, Number of sanding belts: 1, Rollers: no, Cross sanding unit: no, Shoe unit: yes, Elektronik control : yes, Power belt 1 in kW: 11, Intermediate sanding of lacquer: yes, Constant table hight: yes, Godpohqwf Tjfx Aftoca Segment sanding shoe: 40, Brushing unit: yes, Year :1989

Condition: reconditioned (used), Year of construction: 2006, functionality: fully functional, total width: 2,200 mm, total height: 2,400 mm, total length: 2,500 mm, working width: 1,300 mm, overall weight: 7,500 kg, working height: 900 mm, table height: 900 mm, power: 59 kW (80.22 HP), height adjustment type: electric, grinding belt speed: 1,400 mm/s, type of input current: three-phase, conveyor belt speed: 20 mm/s, grinding belt length: 2,640 mm, compressed air connection: 6 bar, table height adjustment: 120 mm, extraction nozzle diameter: 200 mm, power of feed motor: 4,000 W, Bottom calibrating sander for machine in production line, working width: 1300 mm, equipped with: 1 working unit: steel roller, motor: 37 kW; 1 working unit: roller, motor: 22 kW; dust cleaning brush. Gedpfxewy Nnde Aftoca

Condition: used, machine/vehicle number: 008192, Max. machining width: 1350 mm Min. machining thickness: 3 mm Working Table: Fixed pass height Gedpfex A E Szex Afteca Vacuum feed belt: yes No. Operating units: 3 Nr sectioned swab: yes

Year of construction: 2001, condition: ready for operation (used), This HEESEMANN BÜRKLE wood production line was manufactured in 2001. It features a comprehensive oil application line, including RBO vacuum feeding Tornado SC 1300, HEESEMANN MFA 8 with cross-lengthwise brushes, and BÜRKLE SLC 1400 roller application machines. Enhanced with a new Siemens control system in 2024, consider the opportunity to buy this HEESEMANN BÜRKLE wood production line. Contact us for more information. Gcodpfx Afox D Rh Rotoa Application Types Complete Production

Condition: ready for operation (used), Year of construction: 1994, Operating voltage: 380V Frequency: 50Hz Weight: 7500 Current consumption: 172 A Year of manufacture: 1994 Calibration: Standard: 1350 x 2620 mm Cross-grinding: Standard: 5400 x 150 mm Gcodpfx Aet Dk Sioftea Longitudinal grinding: Standard: 1350 x 2620 mm Machine dimensions Working width: 1300 mm

Condition: good (used), Year of construction: 1995, Multi-purpose surface sander, paint sander, modular unit, finishing unit, sanding unit, sanding station, belt sander Gedpfx Afognnbvoteca -Max. sanding belt width: 1350 mm -Abrasive belt: oscillating -Drive: 11 kW -Speed: Frequency controlled -Sanding belt dimensions: 2620 x 1350 mm -Max. workpiece clearance height: 140 mm -Sanding belt unit: height-adjustable (conveyor belt fixed height) -Machine dimensions: 2210/2320/H2310 mm -Machine weight: 4500 kg

Condition: new, Year of construction: 2024, functionality: fully functional, grinding width: 1,350 mm, grinding height: 200 mm, height adjustment type: electric, grinding belt length: 2,620 mm, grinding belt width: 1,400 mm, Heesemann multi-purpose surface grinding machine, type HSM .4 NEW Edition RQHD ROLLER/TRANSVERSE/LONGITUDINAL DLB/DB-S Sanding width 1,350 mm Stand construction with transport bed With continuous transport carpet, feed speed 3 - 15 m/min. frequency-controlled, workpiece thickness (3 - 200 mm) motor-adjustable Automatic workpiece thickness measurement in the machine infeed Workpiece suction clamping system with adjustable vacuum for transporting workpieces shorter than 500 mm in the feed direction, integrated fan with frequency converter, drive power 2.2 kW Non-driven rollers (2 each in the machine infeed and outfeed) Industrial PC 15.6" (permanently installed) Multitouch color display, CF card, Windows Embedded Standard operating system, touch screen version, display for production and downtimes. Ethernet connection possible. Program memory for 100 programs Program for remote maintenance Program for extraction flap control For the extraction flaps/sliders to be installed by the customer, the external pneumatic valves can be controlled with any external operating voltage, e.g. (115V AC / 230V AC / 24V DC) via the pre-installed, potential-free relay contacts. MMI package consisting of: - Intuitive machine operation with self-explanatory symbols - Outfeed and infeed LED strips as operator assistance for the workpiece (infeed workpiece positioning for better sanding belt utilization, outfeed indicates workpiece position) - Belt manager status display on the unit (screen) - Aggregate information with grain size (screen) - Visualization of the position of the workpiece as it passes through through the machine. - Video camera in the outfeed of the machine 1 contact roller unit with steel roller Sanding belt dimensions: 2,620 x 1,400 mm Belt speeds: 24 m/s Drive power: 22 kW Gedpeu Ic Rgofx Aftsca Diameter: 200 mm 1 cross sanding unit Sanding belt dimensions: 4,800 x 150 mm Belt speed: 2.0 - 20 m/s Drive power: 15 kW Frequency converter 1 longitudinal sanding unit with pressure flap belt system Sanding belt dimensions: 2,620 x 1,400 mm Belt speeds: 1.8 - 9 m/s (with pressure flap belt) 1.8 - 18 m/s (without pressure lamella belt) Drive power: 15 kW frequency converter Infinitely variable adjustment of the sanding belt speeds, wear-free braking device, automatic compensation of any differences in belt edge lengths, sanding belt working in counter-rotation, oscillating sanding belt cleaning, adjustable. 2 pressure bars with computer-controlled selective pressure control system CSD® (10 year warranty) In addition, the electromagnetic CSD® system is maintenance-free, as there is no risk of contamination as with pneumatic elements. 1 Rotating disk brush unit DB-S 10 driven disk brushes, working in 2 directions of rotation, central height adjustment for abrasive wear, incl. quick-change device for disk brushes Brush fill: Flex-Trim Diameter: 150 mm Operating voltage: 400 Volt, 50 Hz Uninterruptible power supply for belt tracking monitoring in the event of a temporary interruption in the power supply Energy Management System EMS Belt support side: left Terminal: front left Workpiece stripping device LED lighting inside the machine (on the belt support side) Further information on request.

Condition: good (used), working width: 1,350 mm, HESEEMANN LSM8 Gcodpsxcg Scofx Aftea

Condition: used, machine/vehicle number: 006530, Max. machining width: 1300 mm Min. machining thickness: 3 mm Working Table: Fixed pass height Gsdpfjwcybmox Aftsca Vacuum feed belt: yes No. Operating units: 8 Nr

Condition: ready for operation (used), Year of construction: 2002, General Data Measurements width 2300 mm Measurements depth 3850 mm Measurements height 2500 mm Machine weight 9200 kg Godpfx Aox D Dr Noftoca This HEESEMANN LSM 8 belt sander was manufactured in 2002. It features a sanding width of 1300 mm and accommodates workpiece thickness from 3 to 80 mm. Equipped with a vacuum transport belt and variable feed speed of 5–25 m/min, it ensures efficient material handling and flexibility in sanding operations. Consider the opportunity to buy this HEESEMANN LSM 8 belt sander. Contact us for more information about this machine. Application Types Sanding

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, working width: 1,350 mm, overall weight: 10,000 kg, input current: 153 A, Heesemann LSM8 Surface Sanding Machine QLkLBw Sanding width: 1350 mm CROSS/LONGITUDINAL/LONGITUDINAL Machine Base Conveyor unit with a single transport belt, adjustable feed speed from 3 to 15 m/min by frequency inverter, including transport belt cleaning device. Constant working height of 920 mm. Automatic adjustment for various workpiece thicknesses (3 - 80 mm) via motor-driven movement of the upper machine section. The lifting gear’s toothed belt is dust-protected, and its operation is monitored via the integrated control cabinet. 1. Cross Sanding Unit Belt dimensions: 5,400 x 150 mm Drive power: 13/17 kW Sanding belt with additional blast tube for belt cleaning, wear-resistant brake unit, pressure segment belt system, intermittent belt cleaning system, and belt alignment control. Includes a door with glass window. 2. Longitudinal Sanding Unit Belt dimensions: 2,620 x 1,350 mm Drive power: 13/17 kW Belt with double cleaning nozzles, wear-resistant brake unit, automatic belt length compensation, sanding belt operation counter to feed direction, intermittent belt cleaning, and infrared belt control. The front roller (steel) has an eccentric bearing for light calibrating, controlled from the operator terminal. 3. Longitudinal Sanding Unit Belt dimensions: 2,620 x 1,350 mm Belt speeds: 0.5 – 18 m/s Drive power: 17 kW with frequency inverter Continuously adjustable sanding belt speed, double cleaning nozzle setup, wear-resistant brake unit, automatic belt length compensation, counter-feed direction sanding, intermittent belt cleaning, and infrared belt control. 4. Brush Roller Unit Centrally height adjustable, includes extraction hood and press-on roller. Roller diameter: 150 mm Drive power: 1.5 kW Bristles: fiber Gcedpfxjxp Hvnj Aftea 5. Workpiece Suction Device Ensures safe transport of workpieces shorter than 500 mm in the feed direction, with integrated extractor fan. Voltage: 400 V, 50 Hz Belt exchange: left Operator terminal: left 6. Ionization Bar (from above) Removes static electricity, including high-voltage transformer. 7. Workpiece blow-off device with rotating compressed air nozzles inside the frame. The machine is ready for operation at your facility after mechanical and electrical overhaul by an authorized Heesemann service partner. Fitted with a new conveyor belt. Commissioning and training at your site may be arranged subject to negotiation. Transport costs negotiable – loading included in the price. If you have any questions, feel free to contact me. Paweł Szczepański +48 795 517 258

Condition: good (used), Year of construction: 1994, Technical data: - Manufacturer: Heesemann Bdjdmayow Dplws Tmbeh - Type: EA4 - Year of construction: 2002 Gcjdpfx Afexiy Htstea - Working width: 1,300mm - Working height: 880-920mm - Scooter transport, rubberized rollers - Roll pitch: 65mm - Roll diameter: 60mm - Fine dust filter Arrangement of the dust removal modules seen in the direction of flow: 1) Air blowing channel 1 piece from below 2) Ionization from below 3) Air blowing channel 2 pieces from above (With its own fan, no compressed air required) 4) Ionization bar from below and from above Installation dimensions: - Installation length: 830mm - Width: 2.245mm - Height: 1,470mm - Suction nozzle: D 160mm - Height adjustment: motorized - Seperat control panel with hight adjustment included ( see pictures )

Condition: new, Year of construction: 2025, functionality: fully functional, grinding width: 1,300 mm, grinding height: 160 mm, height adjustment type: electric, grinding belt length: 2,150 mm, Heesemann JSM 1350 RC Surface grinding machine Built in 2025, new machine, currently the only exhibition machine in Europe! - Electric height adjustment via terminal: 3 - 160 mm - Continuous feed: 3 - 12 m/min - Sanding units with separate motors and continuously variable sanding belt speeds up to 18 m/s - Table extensions at the infeed and outfeed - 15.6" industrial PC - Program memory for 100 programs - Remote maintenance - Contact roller unit with steel roller Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Diameter: 160 mm - Longitudinal sanding unit Sanding belt dimensions: 2,150 x 1,370 mm Belt speeds: 18 m/s Drive power: 15 kW Front calibration deflection roller Ø 160 mm, rubberized (65° Shore hardness), grooved - Energy Management System EMS - Doors with glass inserts - LED lighting inside the machine Gsdpjwcqr Asfx Aftsca - Vacuum table with preparation (drilled holes) for connecting the vacuum blower - Vacuum blower (inside the machine) - Workpiece cleaning with oscillating blower tube - CSD (magnetic pressure bar) The machine is connected and can be inspected on-site by appointment. Please do not hesitate to contact us if you have any questions.

Condition: good (used), Year of construction: 2000, Special-purpose machine, not a through-feed machine but a support machine, approximately 150 cm long where the workpiece is clamped. 4 units positioned transversely to the feed direction. It was used for intermediate sanding of polyester lacquer to achieve high-gloss finishes on dashboard panels for luxury cars. The total machine length is 12 m. Godexivbmepfx Aftjca

Condition: used, Wide belt sander Manufacturer: Heesemann Model: KSM1 Sanding width: 1,300 mm Workpiece thickness: 3-140 mm Feed speed: 4.5-22 m/min Sanding belt dimensions: 2,620 x 1,350 mm Brushing device Brush roller diameter: 150 mm Drive power: 1.5 kW Space requirement (L x W): 1,850 x 2,470 mm Gedpfowv Ta Nox Afteca

Condition: used, No. 3198 Machine package painting & surface treatment BUETFERING, HEESEMANN, Barberan Used Consisting of: - Wide belt sanding machine BUETFERING Classic 313 - QCE - UV lacquer roller Barberan BRB - 1400 - Drying channel Barberan HOK - 14/2 - Lacquer sanding machine HEESEMANN FGA 8 - Suction unit Schuko Vacomat S/N 25/45 Technical data: - Wide belt sanding machine BUETFERING Classic 313 - QCE Used, year of construction 2000 Sanding width 1350 mm Sanding belt width cross belt 150 mm Sanding belt length cross belt 4700 mm Sanding belt width wide belt 1370 mm Sanding belt length wide belt 1900 mm Workpiece thickness 3 - 150 mm Feed infinitely variable 2.5 - 13 m/min Power cross belt 15 kW 1st wide belt 12.5/16 kW 2nd wide belt 11 kW Total connection 49 kW Sanding of veneered workpieces with the cross sanding unit and the link pressure beam in one or two passes Precise calibration with the contact roller of the 2nd unit Sanding solid wood: 1st pass with the contact roller / 2nd pass with the cross sanding unit and the link pressure beam Weight of the machine 4500 kg - UV lacquer roller Barberan BRB - 1400 Used, year of construction 2006 For application of primer and top coat - Drying channel Barberan HOK - 14/2 Used, year of construction 2006 With half pressure lamp made of mercury or gallium, with an output of 80 W/cm or 120 W/cm Elliptical point reflector, air cooled, made of aluminum Air cooling system for each lamp or reflector - Lacquer sanding machine HEESEMANN FGA 8 Used, year of construction 1994 Multi-purpose surface sanding machine 1 sanding belt, oscillating Sanding belt width 1350 mm Drive 11 kW Workpiece height max. 140 mm Sanding belt dimensions 2620 x 1350 mm LW Gcsdevxrynspfx Aftja - Suction unit Schuko Vacomat S/N 25/45 Used, year of construction 2000 Filter area 45 m2 Sale on behalf of the customer, ex location near 86156 Augsburg, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Errors in the description and price excepted To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: excellent (used), Year of construction: 1997, total length: 4,400 mm, working width: 1,400 mm, height adjustment type: electric, input frequency: 50 Hz, input voltage: 400 V, Good day, We present for sale Heesemann LSM 8 wide-belt grinding machine in a system of four grinding units: transverse unit / longitudinal unit with calibration roller / longitudinal unit with reverser / longitudinal unit + dust collection brush. Machine after mechanical overhaul and inspection, checked and set up, ready to work. Year of construction: 1997 Feed speed: 5-25 m/min - infinitely adjustable from the control panel Working height: 880 mm Workpieces machined: 3-80 mm Energy demand: 107 kW - at full load Total weight: 10250 kg Control: control panel with physical buttons and display Controls: and side of abrasive belt change: right Single conveyor belts, perforated, perforated table with channel and vakuum fan - for safe transport of short workpieces. Part pressure: rubberized rollers fi 70 mm. Abrasive belt Q aggregate: 5400 mm x 150 mm Motor power: 13/17 kW - two-speed motor - belt speed: 12 m/s / 24 m/s Belt "sergeant": 4850 mm x 141 mm Longitudinal belts L aggregate: 2620 mm x 1450 mm Motor power: 16.5 kW / 21 kW - two-speed motors - 10 m/s / 20 m/s Pressing: Pressure beams with computer-controlled selective pressure control - CSD® system with infinitely variable pressure adjustment of individual pressure elements for trouble-free multi-row loading. Reading control roller distance: 16 mm. The abrasive belts have a cleaning system - blow-off and dust extraction. Workpiece tolerance compensation to a maximum of 2 mm by maintenance-free pressure electromagnets. Working width, as well as the beginning and end of the grinding of the pressure bar electronically controlled. Gjdpfju Hlzfex Afteca Cleaning of the abrasive belts by means of blow-off tubes, dust extraction by means of integrated exhaust channels, activation of the blow-offs automatic, upon detection of workpieces in the machine. At the end, a cleaning/deblasting brush fi 150 mm with an exhaust duct for dust removal. Additional blow-off rotors at the exit of the machine with an exhaust channel. Commissioning at the new site and initial training in operation - to be agreed. Price negotiable on request, machine available immediately.