Used Eisele Lms 1 for sale (115)

Condition: used, Year of construction: 1994, Technical details: Fsdpfx Ahsu Nigke Uopp saw blade diameter: 450 mm revolution per minute: 2820 U/min cutting lenght max.: 5000 mm cutting length min.: 240 mm air pressure - required: 6-8 bar hole of sawblade: 32 mm mitter cutting - both sides: 45+90 ° air-pressure connection: 6 - 8 bar total power requirement: ca. 4,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 6,05x1,49x1,79 m Further features of the machine: - Pneumatic vertical and horizontal tension - pneumatic mist spraying device - height adjustable machine feet - material supports movable with saw - piece counter Cutting diameter according to tabular cutting range diagram, as dependent on speed and saw blade. Accessories: - 2 spare saw blades Machine can be demonstrated under power. i.D. *

Condition: good (used), Year of construction: 1967, Metal Chop Saw Type LMS I Fpedsxa Hkmspfx Ah Ujp - Year of manufacture: 1967 - 380 Volts - 1450 rpm; 2950 rpm - 1.8 kW

Condition: used, Year of construction: 1989, saw blade diameter 350 mm cutting diameter 115 mm capacity 90 degrees: flat 200 x 80 mm turning speeds 1700/3400 U/min saw-blade dia. 350 x 3.3 x 40 mm motor 400 Volt total power requirement 1.8 / 2.6 kW weight ca. 600 kg range L-W-H 1000 x 850 x 1500 mm - in checked condition - machine video - Fedoxabw Ujpfx Ah Uopp ?v=k-VA1e8rSJI Equipment: - semi-automatic aluminum circular saw - pneumatic material clamping - stepless adjustment of the saw head lowering speed - machine table with miter adjustment - machine base frame

Year of construction: 1967, condition: used, machine/vehicle number: 9317, disk of circular saw-Ø: 275 mm cutting area at 90°: 120 x 75 mm Fodpfsb N Eicsx Ah Uopp cutting area at 45°: 90 x 65 mm rotations of disk: 2000 rpm engine: 380 V, 1,1 kW space needed: 700 x 900 x 1000 mm

Condition: used, Year of construction: 1990, Lg.no. 23415 Technical data: Fsdjrkm Scspfx Ah Ujpp - Saw blade dimension 300 mm - Saw blade speed 2800 rpm - Cutting range - at 90° 160 x 20 mm - 100 x 80 mm - at 45° 100 x 40 mm - Drive 400 V / 1.5 kW - Space requirement approx. W 400 x H 1200 x D 700 mm - Weight approx. 80 kg - Machine stand - parallel stop

Year of construction: 2000, condition: used, Max. saw blade diameter: 350 mm Pneumatic material clamps Fjdsw Ddztopfx Ah Uspp Micro spray device Saw table can be rotated in both directions

Condition: good (used), Year of construction: 2008, Cutting range round Sawing capacity round 115 mm Max. Saw blade diameter Max. saw blade diameter 350 mm Cutting area rectangular Sawing capacity rectangular 200 x 70 mm Cutting area square Sawing capacity square 105 x 105 mm Sawing unit Sawing unit power 6.5/8 kw Saw shaft speed Speed on sawing shaft 1700/3400 rpm/rpm Maximum feed length Maximum feed length 9999 mm Shortest feed length Shortest feed length 10 mm Weight Weight 2300 kg Ausstattung / equipment: BEHRINGER SPS Steuerung / SPS Control Micro-Sprüheinrichtung / micro lubrication Controlled zero edge Cutting gap extension Maschinenleuchte / machine light Vertikale Hauptspannung / vertical main clamping Rücklaufsperre / non-return-device Extraction system prepared - (basement extraction unit is not part of the delivery) Fjdpfx Ahjrz Rw Rj Uepp Roller conveyor infeed approx. 5000 mm -roller conveyor infeed selfmade length 5000 mm

Year of construction: 1998, condition: used, Long-cutting saw for cutting aluminum profiles with feed pusher in very good condition Max. cutting length: 700 mm Fodpfx Ahswx I Hvj Uopp Max. cutting height: 130 mm Max. saw blade diameter: 450 mm Maximum feed length of the material pusher 6,200 mm The system is disassembled in our warehouse Further technical data on request

Condition: used, Year of construction: 2014, Hydropneumatic operation Fpodpfx Asxta Rgoh Usp Profile height: 160 mm below hold-down Max. punching height: 145 mm thanks to 2-way adjustable punch heads Abutment height: 120 mm Pressing force: 56 kN at 8 bar Weight: approx. 400 kg

Condition: used, Year of construction: 1999, 145 mm ja zwei Geschwindigkeiten cooling ja type 41103M00U2 mm 6791 volt 400 V Fpedpfx Ahsw Syklo Ujp frequency 50 Hz

Condition: excellent (used), Year of construction: 2023, saw blade diameter: 460 mm, cutting height (max.): 146 mm, TECHNICAL SPECIFICATION .. max. diameter of saw blade: 460 mm .. cutting capacity round: 146 mm .. cutting capacity square: 138 mm .. mitre cutting: no .. .. oblong: 250 mm .. .. .. x: 100 mm .. .. to: 220 mm/min DIMENSIONS / WEIGHTS Fpjdpexryqkjfx Ah Usp .. space requirements -left/right-: 2200 mm .. space requirements -front/back-: 1950 mm .. total height: 2000 mm .. total weight approx.: 2700 kg High-performance automatic saw for cutting aluminium and non-ferrous metal profiles to length in 90° cuts. With feed conveyor and discharge / vibrating section and extraction system. - max. profile width / height to be processed: 250 / 148 mm - Min. profile width / height to be processed: 10 / 20 mm - Cut-off lengths from 10 mm - Saw blade motor 12/18.5 KW, S6 60%

Condition: used, Year of construction: 2008, Behringer Eisele HCS 150, year of manufacture 2008, feed magazine, cut-off disposal. The machine is operational and can be purchased in its current condition or fully reconditioned by us including assembly. Type: HCS 150 Machine number: Type no.: 49600H0024 Year of manufacture: 2008 Weight: 4,500 kg Required space: 9.3 m x 7.5 m Control: Siemens PLC control Round material (max.): Ø 150 mm Flat material (max.): □ 135 mm Saw blade feed: 0.5 - 40 mm/min Compartments incl. roller conveyor: 11 units Single compartment load: max. 500 kg at 3 m bar length Fsdpfx Ahexpd D Ns Uspp Total load capacity: 4,000 kg Conveyor manufacturer: Geppert Conveyor length: 1,500 mm Conveyor width: 400 mm Conveyor speed: 6.3 m/min Total power requirement: approx. 34 kW Voltage: 400 V Air connection: 6 Bar

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit Loading Unit: Horizontal loading magazine model HLM 4-strand timing belt conveyor 6 compartments, each 285 mm wide, for holding profiles Maximum material height as per saw cutting area; round material max. diameter 130 mm 3 glide strips between timing belts provide additional support Profile length min. 2,700 mm, max. 6,500 mm Saw: Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA Maximum saw blade diameter: 500 mm Continuously variable speed adjustment Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front Siemens S7-300 controller with touchscreen Reversing device with five-fold stroke up to max. 5,000 mm Electric material feed 3 - 1,000 mm (single stroke) Cutting gap extension, both sides Pneumatic extraction slide Scrap flap after the saw for offcuts / remnants Cut-off length depends on profile, from 8 mm Menzel minimal quantity lubrication Clamping pressure regulation 2 extraction nozzles for dust collection Fjdexvbvvspfx Ah Uepp Unloading: Table area 1,500 mm x 2,500 mm Pneumatic cross transfer

Condition: good (used), Year of construction: 1986, machine/vehicle number: 0783, Miter cold circular saw EISELE Type VMS-III-S-PV Type No. 430 Machine. No. 0783 Year of construction 1986 Sawing range at 90°: (round) Ø 120 mm Fpsdpfx Ahst A Ar Sj Ujp Sawing range at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 + 34 rpm Mitre cut 45° to the left, 90° and up to 30°(60°) to the right infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Pneumatic material quick clamping device - Infinitely adjustable pneumatic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Comfortable and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 460 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: used, Max. punching force: 100 kN Max. stroke: approx. 50 mm (adjustable via clamping lever) Fpjdpfx Ahoxrmz As Ujp Stroke activation via foot switch Weight: approx. 600 kg

Condition: used, Year of construction: 1977, miter ja Fedjvxlthopfx Ah Uopp clamping ja kW mechanical Senkung weight of the machine ca. 500 kg

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 6052, Designed for corner crimping of aluminum profiles ("corner crimping machine"). Maximum profile height: up to approx. 140 mm. Maximum pressing height: up to approx. 100 mm. Press force: 56 kN per head. V-block (anvil) height: up to approx. 80 mm. Supplied with 3 standard sets of crimping tools (3 mm, 5 mm, 7 mm). Foot pedal controlled as standard. Pneumatic pressing (pneumatic press operation via leverage) with a working pressure of 6–8 bar. Fsdjxu U E Ijpfx Ah Uopp

Condition: good (used), Year of construction: 2002, Behringer Eisele VA-0-250-NC Circular saw TECHNICAL DATA Sawing range: 90 ° Fodpfxevdk A Ej Ah Uepp Saw blade diameter: 25 cm Bore: 40 mm Cutting range: 10-75 mm Cutting length: 5-900 mm Speed: 2800 rpm Cutting speeds: 26/52/103/206 SFPM or 0.13/0.26/0.52/1.05 m/s Feed speeds: 0-40 mm/sec NC axis: Yes Dimensions: 190 x 127 x 190 Weight: 1300 kg We assume no liability for the accuracy, completeness and up-to-dateness of the information provided

Condition: used, Year of construction: 2014, machine/vehicle number: 0101-250007, The Behringer Eisele HCS 160 MF Straight Cut Fully Automatic Metal Circular Saw is a high-quality, robust machine specifically designed for professional use and maximum cutting performance in metalworking, additionally engineered for multi-shift operations. It offers an excellent combination of power, precision, and versatility, making it particularly suitable for large production runs. The fully automatic saw comes equipped with a comprehensive material loading and unloading system. The loading magazine is positioned on the infeed side, while on the outfeed side, short pieces can be discharged from the conveyor into designated containers at three different positions using a pusher via the unloading device. Fodpfx Asxl R Nksh Uepp

Condition: used, Max. saw blade diameter: 350 mm Fpedpfx Aoxn Ivgeh Uep Manual saw feed 2 sawing speeds Coolant lubrication

Condition: used, Year of construction: 1981, turning speeds 40/80 U/min Fpsdpfxsvu Hlke Ah Uop 0025 voltage 380 V clamping ja kW miter ja weight 700 kg

Year of construction: 2004, condition: used, Max. saw blade diameter: 500 mm cutting range up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3,800 rpm Piece counter with automatic shutdown when setpoint is reached Fpodpfx Ahexn Iq Dj Uep Continuously adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material clamps Spray device Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH) 1000 kg

Condition: used, Year of construction: 1979, cutting diameter 440 mm weight of the machine ca. 780 kg Fpsdpfx Asf Dwa Uoh Usp +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Year of construction: 2011, condition: used, Max. saw blade diameter: 500 mm cutting range up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3,800 rpm Fodpfx Ahoxl Dz Ts Uspp Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material clamps Spray device Only 4400 operating hours Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH)

Year of construction: 2006, condition: used, Max. saw blade diameter: 500 mm Fpodpfevcmirsx Ah Uop cutting range up to 80x 200 mm Feed length: max. 800 mm with digital display Saw blade speed: 2,000 - 3,800 rpm Piece counter with automatic shutdown when setpoint is reached Continuously adjustable pneumatic material feed Hydropneumatic saw feed Pneumatic material clamps Spray device Only 2200 operating hours Including instruction manual Machine dimensions: 2100 x 1100 x 1500 mm (WxDxH)