Used Eisele Lms 1 for sale (98)

Condition: excellent (used), Year of construction: 1966, I sell a circular saw made in Germany. Company Eisele model vms II in good condition Lredsvbwfnepfx Afzsg

Condition: good (used), Commission trolley, tray trolley, paint drying trolley, specialist transport trolley, transport trolley, window profile trolley -Quantity: 1 commission trolley available -Total length: 1750 mm -Total depth: 1020 mm Lsdsb Hw Dbspfx Afzerg -Total height: 1670 mm -Lower support: 720 mm -Support height: 1400 mm -Weight: 62 kg

Condition: excellent (used), functionality: fully functional, Large fully hydraulic EISELE: Weight approx. 0.75 t, saw blade 440 mm Speeds: 12.5 / 25 rpm Lrodpfx Afsya U Afszeg Motor power: 2.6 / 3.2 kW Hydraulic saw feed Hydraulic vice Cutting ranges: 200 x 100 mm (square tube) Mitre cut one-sided 45°.

Year of construction: 1999, condition: used, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Lodpfxjvmz R Ss Afzjrg Max. notch width: 300 mm Max. latch height: 185 mm Max. latch depth: 185 mm Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Condition: used, Year of construction: 1984, functionality: fully functional, machine/vehicle number: 0278, Mitre cold circular saw EISELE type VMS-III-S-HYD Lsdst A Arlepfx Afzerg Type No. 430 Machine. No. 0278 Year of construction 1984 Sawing range at 90°: (round) Ø 120 mm Sawing area at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 8, 16, 33, 66 rpm. (2 gear stages + 2 motor speeds) Mitre cut 45° to the left, 90° and up to 30°(60°) to the right, infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Hydraulic material quick clamping device - Infinitely adjustable hydraulic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Convenient and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base - Central lubrication (manually operated) Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 490 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Condition: good (used), Year of construction: 1986, functionality: fully functional, machine/vehicle number: 0783, Miter cold circular saw EISELE Type VMS-III-S-PV Type No. 430 Machine. No. 0783 Year of construction 1986 Sawing range at 90°: (round) Ø 120 mm Sawing range at 90°: (flat) 150 x 110 mm Sawing range at 45°: (round) Ø 100 mm Sawing range at 45°: (flat) 120 x 100 mm Saw blade diameter: 350 mm Saw blade speed: 17 + 34 rpm Mitre cut 45° to the left, 90° and up to 30°(60°) to the right infinitely variable Motor power: 2 and 2.6 kW Mains connection: 380 Volt, 50 Hz Features: - Semi-automatic vertical cold circular saw - Pneumatic material quick clamping device - Infinitely adjustable pneumatic saw blade feed - Convenient miter adjustment with fixed stops - Saw carriage on very stable rectangular guide - Comfortable and stepless stroke adjustment of the saw unit via clamping lever - Generously dimensioned gearbox - with Eisele rotation compensation for long saw blade service life - Simple saw blade change - High productivity with minimum space requirement (less than 1 m²) - Coolant system in the machine base Space requirement: 1100 x 710 x 1900 mm (L x W x H) Weight 460 kg The machine can be tested / demonstrated under power on site. All information without guarantee. Subject to prior sale. Lrodot A Ar Sopfx Afzsg The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations by the seller or for any injury to life, limb or health.

Year of construction: 2011, condition: used, Technical details: saw blade diameter: Ø 400 - 500 mm hole of sawblade: Ø 50 mm saw blade rpm: 6 - 70 / steples U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 140 x 140 mm cutting range 90 degrees: flat: 400 x 30 / 345 x 70 / 300 x 95 mm Table dimensions: LxB: 620 x 670 mm height over floor: 1000 mm total power requirement: 8 kW Lrsdpfx Afou Niuhjzeg weight of the machine approx.: 1170 kg The machine is currently in the technical department. SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Clamping pressure 30 bar Clamping stroke Øxstroke: 100 x 160mm Hydraulic pump Operation via control panel / two-hand operation Coolant system with pump *

Condition: used, Technical details: Saw blade diameter: 400 mm cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Ledpfeu Niuzjx Afzorg Mitre cut 30° to 90° Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Without coolant system *

Condition: good (used), Year of construction: 2009, machine/vehicle number: 10014344, Offer 25481 Technical Data: - Saw blade diameter up to 350 mm - Saw blade feed via hand lever - Maximum opening width of pneumatic vice: 205 mm - Cutting capacity with saw blade diameter 350 mm: - at 90° round: 120 mm - square: 110 mm - flat up to 200 x 90 mm - or 140 x 110 mm - at 45° round: 100 mm Lodox Tqnfspfx Afzerg - flat: 100 x 100 mm - Mitre adjustment: left up to 45°, right up to 45° and 30° - 2 saw blade rotational speeds: 17 and 34 rpm - Drive: 400 V / 1.4 / 1.9 kW - Air connection: 6 - 8 bar - Micro-spray coolant system - Space requirement approx.: W 850 x H 1750 x D 950 mm - Weight approx.: 400 kg

Condition: new, Available from stock / short-term delivery! Speed: 17 / 34 rpm. For saw blades up to 350 mm diameter. Equipped with a pole-changing three-phase motor, 1.4/1.9 kW. Stationary base frame with built-in coolant system and chip drawer. Cutting capacity: Flat 90°: 170 x 100 mm Flat 45°: 120 x 100 mm Flat 30°: 85 x 100 mm (right side only) Square 90°: 100 mm Lrjdsllvpwopfx Afzsg Square 45°: 95 mm Square 30°: 85 mm (right side only) Round 90°: 120 mm Round 45°: 120 mm Round 30°: 100 mm (right side only) Technical Data: Length: 895 mm Width: 665 mm Height: 1750 mm Weight: 300 kg Support height: 900 mm Options: Roller conveyors and length measuring systems (image is for illustration purposes only, available in manual and automated versions upon request) We recommend our proven coolant concentrate for 'Eisele' saws, our micro-spray oil (for machines with micro-spray equipment), as well as high-quality circular saw blades and band saw blades tailored to your specific needs. Contact us for a non-binding enquiry!

Condition: new, Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Lrodsx E U Dnjpfx Afzog We offer fully automatic circular saw machines and complete sawing centers from the "Profilma", "KS", and "SW" series with saw blade diameters up to 650 mm. Loading magazines and unloading systems are customized to your requirements. A high-performance extraction system with oil mist separator completes the comfort package. Contact us – together we will find the optimal solution for your production!

Condition: new, For processing all common aluminium window profile systems such as Schüco, Hueck, Heroal, Reynolds, etc. Universally applicable thanks to double adjustable punching tools. Suitable for corner brackets with groove dimensions from 25 to 60 mm and profile chamber offset from 0 to 40 mm. Continuously height-adjustable feelers, punch blades and stop inserts. Feelers and punching units are equipped with scales. Retractable stop for easy insertion of profiles, self-adjusting when advancing against the profile. Hydraulic stop locking. Pneumatic pressing operation via a lever system ensures a synchronous punching process. 2 pneumatic hold-down cylinders for clamping the profiles. 2 eccentric discs for positioning the frames. 2 swiveling profile support arms. Operation via 2 foot valves. Includes standard tooling. Lredpfx Afehmfyhezjg

Condition: new, Fully automatic sawing and punching or drilling in a single machine! Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Compatible with Ø 500 or 550 mm saw blades, reversible mechanism for cut lengths up to a maximum of 4000 mm. Saw-Punching Automation System Profilma 502 ST-V • For aluminium and plastic profiles • For cutting to length and punching based on the Profilma 502 model • Fully automatic operation and Ledex Haftspfx Afzorg Saw-Drilling Automation System Profilma 502 BG • For aluminium and plastic profiles • Cutting to length, drilling, and thread cutting of up to 4 profiles simultaneously • Fully automatic operation

Condition: ready for operation (used), Year of construction: 1989, Saw blade Ø: 350 mm Cutting capacity: at 90° & 45°, round: 120 mm at 90°, flat: 170 x 100 mm at 45°, flat: 120 x 100 mm Lsdpfx Aoxln Uksfzorg at 90°, square: 100 mm at 45°, square: 95 mm 2 saw blade speeds: 17/34 rpm Drive motor: 400 V, 2/2.6 kW Weight: 425 kg Required space: 900 x 800 x 1800 mm

Year of construction: 1997, condition: used, Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. notch width: 300 mm Lsdsx Ecg Uepfx Afzerg Max. latch height: 185 mm Max. latch depth: 185 mm Pivoting material stop with locking points and digital display Motorized latch height adjustable with digital display Motorized adjustment of the angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material clamps coolant lubrication

Condition: good (used), Year of construction: 1989, functionality: limited functionality, machine/vehicle number: 8138, type of input current: three-phase, input voltage: 400 V, ❇️ Pressta Eisele AKF – Notching Milling Machine / Notching Machine | Excellent Condition | Fully Functional | UVV Safety Certified Lredsx Rpfqepfx Afzsg For sale is a robust Pressta Eisele AKF notching milling machine from the metalworking and window construction industry. The machine is in overall very good, well-maintained, and fully functional condition and was in use until recently. A valid UVV/safety inspection is available (see sticker/photos). ⚠️ Important Note: The pneumatic hoses on this machine show material fatigue due to age. ➡️ Recommendation: Replacement of the pneumatic hoses before initial operation (moderate effort required). Inspection and function test on site possible at any time. ⸻ ❇️ Machine • Manufacturer: Pressta Eisele • Type: AKF • Machine No.: 8138 • Year of Manufacture: 1989 • Made in W.-Germany • Application Area: Notching of profiles in metal and window construction ⸻ ❇️ Features & Specifications • Heavy, low-vibration machine body • Powerful motor • Pneumatic feed and clamping functions • Stable work table with clamping options • Protective covers included • Foot pedal operation • Service-friendly design ⸻ ❇️ Condition • Mechanics and electrics: fully functional • Well-maintained overall condition • Note: Pneumatic hoses need replacement due to age (see above) ⸻ ❇️ Dimensions • External dimensions (approx.): H 137 cm × W 99 cm × D 97 cm ⸻ ❇️ Terms • Sale on behalf of client • Invoice with VAT possible • Location: 72229 Rohrdorf • Loading on site by overhead crane possible • Delivery possible upon cost coverage ⸻ ❇️ Price • Net price: €1,700 negotiable plus VAT ⸻ If interested, please feel free to get in touch – inspection and test run can be arranged by appointment. ⸻ ⚠️ I am offering additional machines and accessories for window, metal, and workshop operations in my other listings. ‼️ Please also check my other offers – it's worth it!

Condition: like new (used), Year of construction: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade 560 mm Lredpfx Aouiy Hrsfzjg Motor power 6,5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100 - 4200 m/min Saw height control: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed 0 - 40 mm/s infinitely adjustable Cutting length 5-950 mm (9999 mm multiple stroke) Feed speed max. 500 mm/s Weight approx. 1900 kg Dimensions LxWxH 2200mm x2700mm x1950mm The machine is in mint condition, both technically and visually, following a completed retrofit. Due to its equipment and design, the machine can be used very efficiently for a wide range of applications. The programmed HMI control system ensures simple and very profitable operation of the machine. The soundproof cabin reduces noise emissions to a minimum. The machine is generally overhauled in our company at the customer's request. Among other things the following points will be renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI user interface - Replacement of the ball screw - Replacement of servo motor and servo inverter - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of the valve terminal - Optimization of extraction performance - Overhaul of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab The machine also has: - Soundproof cabin - Splitting extension (for a high-quality cutting surface without return marks) - Height control fully electronic Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Mass clamping device for parallel sawing of several workpieces - Flat magazine for automatic feeding of up to 6 m long primary materials - Roller conveyors for primary material - Reinforced motor 18.0 KW (frequency-controlled) - Delivery and installation on your premises - Training of your employees

Condition: excellent (used), Year of construction: 1999, O F F E R We can offer you, subject to prior sale and errors excepted, the following ex stock, without obligation: EISELE Circular Sawing Machine for Straight and Mitre Cuts Model: VMS 370 Year of manufacture: 2000 Max. saw blade Ø: 370 mm Lsdpfx Asx A H Rrefzerg Cutting capacity: - Pipes approx. up to 130 mm - Flat material: 200 x 100 / 140 x 100 mm - Solid material (square): 120 mm Note: For mitre cuts, cutting capacities may be somewhat reduced—up to max. 140 mm. Saw carriage stroke, manual, vertical approx.: 200 mm Saw blade speeds: 17–34 rpm Saw blade drive approx.: 2/2.6 kW Total drive approx.: 3 kW – 380 V – 50 Hz Weight approx.: 500 kg Accessories/Special features: • Adjustable saw head for mitre cuts at 30° / 45° / 90° via scale • Pole-changeable three-phase motor with max. 2.6 kW drive • Manual feed of saw carriage with long, adjustable lever • Manual workpiece vice, jaw width approx. 120 mm • Integrated coolant system with chip collection tray • Roller conveyor material feed approx. 2,000 mm • New saw blade installed, 2 spare saw blades included • Electrical system recently overhauled Ideal machine for locksmithing and metalworking shops. Condition: Very good – ready for demonstration – very smooth running Delivery: Ex stock, as inspected Payment: Net, strictly after receipt of invoice We look forward to your order. We also have larger EISELE cold circular saws and other (band/hacksaw/cold circular) saws in stock. Further saw machines always available—please enquire.

Condition: used, Year of construction: 2007, Hydropneumatic operation Profile height: 200 mm below hold-down Max. punching height: 150 mm Abutment height: 150 mm Ljdpfx Afsxwykuozorg Weight: approx. 400 kg

Year of construction: 2005, condition: used, Maximum cutter diameter: 300 mm Manual milling feed Angle stop infinitely adjustable with locking points Max. release depth: 110 mm Max. profile height: 190 mm Max. cutter package height: 95 mm Pneumatic material clamps Spray device Ljdeu T N D Uspfx Afzsrg Very good condition

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Behringer Eisele VMS 400 A metal circular saw for processing almost all steel qualities. Integrated coolant unit and micro-spraying system, selectable in the control system as required Hydraulic saw feed and quick clamping vice with clamping pressure reduction Lredpsxwmckofx Afzsg NC control with graphic display and keypad 3 selectable operating modes (manual mode, series and single cuts) Convenient stroke adjustment of the saw unit via clamping lever Can be combined with infeed and outfeed roller conveyors Manufacturer: Behringer Eisele Type: VMS 400 A metal circular saw Year: 2013 Condition: used, very good Flat 90 ° [mm] 200 x 120 Flat 45 ° [mm] 140 x 120 Flat 30 ° [mm] 100 x 100 Square 90 ° [mm] 120 Square 45 ° [mm] 120 Square 30 ° [mm] 100 Round 90 ° [mm] 140 Round 45 ° [mm] 140 Round 30 ° [mm] 110 Feed length 800 mm Drive power 2.0 / 2.6 kW Speeds 8 / 16 / 32 / 64 min-1 Saw blade diameter 400 mm Saw blade feed hydraulic Material feed ball screw Hydraulic clamping device Minimum quantity lubrication Chip clearing brush Length 3,100 mm Width 1,500 mm Height 2,000 mm Weight 1,350 kg Material support height 920 mm Scope of delivery: Documentation 4x saw blades 1x feed roller conveyor 2m

Condition: good (used), Year of construction: 2002, Metal Circular Saw Behringer Eisele VMS 300 PV Manufacturer: Behringer Eisele Type: VMS 300 PV Year of construction: 2002 Condition: used Cutting range: Straight cut: 120 x 75mm 45° miter cut: 80 x 75mm Lrsdpoxwl Urefx Afzjg Speed: 40/80 rpm Weight. 200kg - semi-automatic version - pneumatic quick clamping devices - Infinitely adjustable hydropneumatic saw blade feed - stroke adjustment of the saw unit via clamping lever - generously dimensioned gears with EISELE rotation compensation - Convenient saw blade change Scope of delivery - Operating instructions - 1x saw blade (mounted)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Behringer Eisele VMS 370 PV Metal Circular Saw Manufacturer: Behringer Eisele Type: VMS 370 PV Year of manufacture: 2008 Condition: used, very good Machining cross section max. Ljdpfexwl Ryox Afzsrg round at 90° 130 mm rectangular at 90° 200 x 100 mm round at 45° 130 mm rectangle at 45° 140 x 100 mm Saw blade diameter 370 mm Saw blade width 3 mm Bore diameter 40 mm Adjustable saw blade speed 34 / 68 rpm Machine head swivels 45-90-45-30° Total motor power 2.0/2.6 kW Width 900 mm Length x width x height 1050 x 900 x 1900 mm Minimum quantity lubrication Scope of delivery: - 1x saw blade - Instruction manual

Condition: good (used), Year of construction: 2013, Metal Circular Saw BEHRINGER Eisele VMS 370 Manufacturer: Behringer Eisele Type: VMS 370 Condition: used, good Year of manufacture: 2013 Machining cross section max. round at 90° 130 mm Machining cross section max. rectangle at 90° 200 x 100 mm Machining cross-section max. round at 45° 130 mm Machining cross-section max. rectangle at 45° 140 x 100 mm Saw blade diameter 370 mm Saw blade width 3 mm Bore diameter 40 mm Adjustable saw blade speed 17/ 34 rpm Machine head swivels 45-90-45-30° Total motor power 2.0/2.6 kW Minimum quantity lubrication Scope of delivery: Lrodpsxwl Rmofx Afzjg - BEHRINGER Eisele VMS 370 metal circular saw - used saw blade - digital operating instructions - roller conveyor with stop 2m

Condition: new, Manufacturer: Behringer Eisele Lrodpfx Afexwl Rgjzjg Type: VMS 350 Condition: NEW Machining cross section max. round at 90° 120 mm Machining cross section max. rectangle at 90° 170 x 100 mm Machining cross section max. round at 45° 120 mm Machining cross-section max. rectangular at 45° 120 x 100 mm Saw blade diameter 350 mm Saw blade width 3 mm Bore diameter 40 mm Adjustable saw blade speed 17 rpm / 34 rpm Machine head swivels 45-90-45-30° Total motor power 1.4/1.9 kW Width 900 mm Length x width x height 1050 x 900 x 1900 mm