Used Felder Bf 6 for sale (138)

Condition: used, Combined Machine FELDER BF6-26 -used- Tilting circular saw, Angle-mitre fence, Tilting spindle moulder, Spindle moulder with forward and reverse rotation, Self-adjusting cutterblock ----- Technical Data ----- Planing width: 260 mm, Number of knives: 2 pcs, Cutterblock diameter: 86 mm, Passage height: 220 mm, Planer table length: 1300 mm, Cutting width: 780 mm, Circular saw tilting range: 0-45°, Spindle moulder diameter: 30 mm, Spindle moulder tilting range: 0-45°, Usable spindle moulder length: 120 mm, Lsdpfx Aoxlt Shjgpohi Max. cutter diameter: 220 mm, Max. retractable cutter diameter: 180 mm, Spindle speeds: 3500/6100/7800 rpm, Motors: 3 units, Extraction port for planer: 120 mm, Extraction port for saw: 120 mm, Extraction port for spindle moulder: 120 mm

Condition: good (used), Year of construction: 1990, functionality: fully functional, planing width: 310 mm, cutting width at rip fence: 80 mm, Panel saw, milling machine, planer, mortising machine, combination woodworking machine, table saw, circular saw, joiner's saw, panel saw, table router, tilting spindle moulder Manufacturer: FELDER Model: BF6-31 Year of manufacture: 1990 Sliding carriage: 1.6 m Manual height adjustment for saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment up to approx. 80 cm Support table Mitre fence Main motor power: 3 kW Ljdpfx Agoyzdnbspehi Tilting spindle moulder Manual height adjustment of the spindle Manual spindle tilt up to 45° to the rear Spindle diameter: 30 mm 3 speeds, adjustable by belt Spindle retractable below table and removable Motor power of milling unit: 3 kW Milling fence with fine adjustment Surface and thickness planer Planing width: 31 cm Maximum workpiece height: approx. 22 cm Central dust extraction hood for planing and thicknessing Tilting fence 2-knife Felder cutterblock system Motor power: 3 kW Mortiser Single-lever control Workpiece hold-down Chuck up to 16 mm

Condition: used, Year of construction: 1991, machine/vehicle number: 78-08/093-91, functionality: fully functional, planing width: 400 mm, Combined Planer Thicknesser Felder AD 6-41 Year of manufacture: 1991 S/N 78-08/093-91 In good condition Lsdpjywfbuofx Agpohi Planing specifications Planing width: 410 mm Thicknessing width: 404 mm Thicknessing height: approx. 4 – 220 mm Maximum chip removal: 5 mm Cutter block / cutting data Cutter block diameter: approx. 86 mm Number of knives: 2 Cutter block speed: approx. 4,700 rpm Table / Construction Total length of planing tables (standard): approx. 1,680 mm Feed Feed speed: stepless, approx. 6.5 m/min with digital height adjustment Electrical data Motor power: 4.0 kW (5.5 HP) Voltage: 400 V three-phase (typical for this series) Extraction connection approx. 120 mm Weight approx. 800 kg

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Purchase date: 2020, as a new machine. 2-axis control, for height and swivel adjustment. Technical data: Cutting length: 2800 mm Cutting width: 1300 mm Lhjdpeznl Awsfx Agpji Cutting height: 155 mm Max. saw blade diameter: 450 mm X-motion control with program memory Angle scale with length compensation Dust extraction port: Ø 120 mm Motor power: 7.5 kW Outrigger length: 4,000 mm

Condition: used, Year of construction: 2019, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, tool diameter: 120 mm, number of blades: 96, actuation type: electric, Equipment: CE marking, - Year of manufacture: 2019. - Condition: very good. TECHNICAL SPECIFICATIONS: - Planing width: 630 mm - Planing height: 3-300 mm - Digital control of table height with display - Motor: 7.35 kW - Maximum chip thickness: up to 8 mm Lhodpfx Ajzim Rrjgpsi - Minimum workpiece length: 250 mm - Diameter of planing shaft: 120 mm - Silent-Power spiral shaft, i.e., very quiet with four-sided knives - Self-aligning planing knives, i.e., no adjustment required after rotation - Additionally, 2 rollers in the table for processing wet or resinous wood - Smooth feed speed adjustment from 4-16 m/min - Power supply: 3 x 400 V - Diameter of dust extraction port: 160 mm - Weight: 845 kg - Dimensions (L / W / H): 125 x 115 x 114 cm

Condition: used, Year of construction: 2017, Max. cutting width: 4200 mm; max. cutting height: 2200 mm; saw blade diameter: 250 mm; max. processing thickness: 60 mm; saw blade bore: 30 mm; bottom support: plastic supports; material support: retractable plastic strips; measuring system: scale; saw head tilting: manual; saw feed: manual; mounting: free-standing; extraction: external; locking of saw beam: manual; approx. weight: 1000 kg; dimensions: 5600 x 1700 x 3000 mm; motor power: 4.2 kW. Storage location: Nattheim Lhjdjxg Igiopfx Agpei

Condition: good (used), Code: 0435 Brand: FELDER - AUSTRIA Model: G 560 - CE Standard Automatic edge bander with grinding units for applying wooden, abs, pvc, veneer edges to joinery, furniture, custom-made furnirture, panels, doors, kitchens and other items – CE Standard Technical data: Edge thickness 0,4–5 mm Min/max panel height 10/60 mm Workpiece feed speed 9 mt/min Configuration: Adjustable infeed guide Set of 2 diamond infeed grinding units for perfect panel grinding Tool diameter 60 mm Bore 25 Tool height 60 mm N° 4 cutting edges Rotation speed 12000 rpm Motor power 1,1 Kw each Gluing unit Pvc shears End cutting unit: Blade diameter 100 mm Bore 20 – Blade inclination 0-5°– Blade rotation speed 12000 rpm End trimming unit: Tool diameter 77 mm Bore 20 – Rotation speed 12000 rpm Edge scraper unit Glue scraper unit to remove any glue residue Touchscreen control panel Support table for large panels Lsdpfx Agjzkhlgjpehi Soundproof protection cabin Suction inlets: 1 Ø 120 mm – 2 Ø 80 mm Compressed air 6–7 atm Overall dimensions mm 3200 x 900 x 1500 mm Weight kg 900

Condition: good (used), Year of construction: 2023, For sale is a Felder RL-160 clean air extraction unit with a maximum airflow rate of 3200 m³/h. The extraction unit is in excellent condition and has been inspected and refurbished by our professional staff. (Fully functional) Lhjdpfxoxnxm Nj Agpei Technical data: - Max. airflow rate: 3200 m³/h - Filter area: 10 m² - Extraction connection diameter: 160 mm - Automatic filter cleaning - Antistatic filter - H3 dust tested - Year of manufacture: 2023 The clean air unit is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Related terms: clean air unit, extraction unit, dust extraction, clean air, RL Reference: R-A0117

Condition: used, FORMAT 4 Kappa V60 Panel Saw - used - Welded frame with extremely high rigidity, automatically retracting support slats, stable locking of the saw carriage at top and bottom, control panel at eye level, digital readout on the longitudinal stop, digital display for horizontal cuts, strip cutting device, lift-roller transport system, edgable support surface, dust extraction unit TRK, dust-tested ----- Technical Data ----- Cutting length: 4,300 mm, Cutting height: 2,200 mm, Cutting depth: 60 mm, Saw blade Ø: 250 mm, Lsdpfx Agoy Sazrepjhi Motor: 3 kW, Extraction port Ø: 2x 100 mm, Space requirement (LxWxH): 5,600 x 1,700 x 3,000 mm

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 850 kg, power: 5.52 kW (7.51 HP), input voltage: 400 V, input frequency: 50 Hz, grinding width: 650 mm, Further technical data Grinding height: 3 mm - 200 mm (250 mm) Grinding width: 650 mm Dust extraction connection: 2 x 120 mm Feed rate: continuously variable 2.5-10 m/min Standard equipment Lodpfx Asw Axi Ajgpohi Maintenance interval display Plain text error messages Constant infeed height – fixed table, 900 mm Electric height adjustment including fine adjustment from the control panel Feed rate continuously variable from 2.5-10 m/min, adjustable via inverter from the control panel Endless belt conveyor Automatic feed belt centering 1st brush unit with selectable steel brush, counter-rotating operation, mechanically pre-tensioned rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm 2nd brush unit with Tynex brush K60 D=200mm, counter-rotating operation, mechanically pre-tensioned rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm Dimensions: 1455 x 1070 x 1250 mm Required air pressure: 6 bar Optional equipment 022 7.5 hp (5.5 kW) motor power for 1st unit 024 7.5 hp (5.5 kW) motor power for 2nd unit 027 Oscillation control for 1st and 2nd brush unit

Condition: ready for operation (used), Year of construction: 2019, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, workpiece length (max.): 150 mm, edge thickness (max.): 3 mm, height adjustment type: mechanical, feed rate X-axis: 18 m/min, actuation type: electric, total height: 1,468 mm, total length: 4,412 mm, total width: 1,511 mm, For sale: a Felder Format4 Tempora F600 edge banding machine in very good condition. The machine comes from a professional interior design workshop and has always been carefully maintained and used. The Tempora F600 is known as a very reliable industrial edge banding machine with a high processing speed (10/18 m) and excellent finishing quality. The machine is fully functional and can be put into operation immediately. Specifications: Brand: Felder Model: Format4 Tempora F600 Year of construction: 2019 Features include: Ljdpsy R I Rfofx Agpohi Smartouch touchscreen control Program settings with memory Anti-glue adhesion fluid Pre-milling unit For panels with a thickness of up to 60 mm Radius milling cutter above and below Corner rounding unit Radius scraper unit Flat scraper unit Glue remover fluid Polishing unit Automatic feed Suitable for processing: ABS edge banding PVC edge banding Veneer edge banding Solid edge strips Condition: The machine is in good technical and optical condition, has always been periodically maintained and cleaned in a professional workshop. Delivery: The machine can be picked up in the condition as shown in the photos. Inspection: Inspection is possible by appointment in Rijnsburg. Transport: To be arranged by the buyer. Available from mid-July. Asking price: € 28,490, - excluding VAT.

Condition: used, Year of construction: 2007, power: 3 kW (4.08 HP), intake manifold diameter: 160 mm, filter area: 10 m², total height: 1,800 mm, total length: 1,700 mm, total width: 800 mm, overall weight: 200 kg, Equipment: CE marking, No. 04529 Mobile extraction unit / mobile dust extractor Felder RL 160 Used, year of construction 2007, good condition, machine comes from a small business Nominal air flow approx. 1750 m3/h Minimum air flow 1448 m3/h Maximum air flow 3250 m3/h Negative pressure at suction pipe 1720 Pa Nominal negative pressure 1120 Pa Extraction connection diameter 160 mm Motor 3 kW Residual dust content class H3, 0.1 mg/m3 Filter surface 10 m2 Design type B1, suitable for extracting combustible dusts of dust explosion classes St 1 and St 2 Manual filter regeneration 2 chip collection containers, each 200 l GS-tested CE-compliant Transport dimensions approx. 1700 x 800 x 1800 mm LWH Weight approx. 200 kg Ledpozcqxuefx Agpjhi To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: ready for operation (used), Year of construction: 2019, This Felder FORMAT 4 Tempora60.06LX edgebander was manufactured in 2019. It features an x-motion PLUS control system, chain feed with a speed of 10 m/min, and a Teflon-coated gluing unit for EVA or PUR granulate. The machine supports edge thicknesses from 0.4 to 3 mm and includes a multifunctional milling unit. Consider the opportunity to buy this Felder FORMAT 4 Tempora60.06LX edgebander. Contact us for more information about this machine. • Control system: x-motion PLUS • Chain feed • Feed speed: 10 m/min • Drive motor: 0.75 kW (S6) – 1.1 kW (S6) • Minimum workpiece length: 140 mm • Minimum workpiece width: 70 mm • Note: Minimum width varies depending on workpiece length, height, and surface finish. • Turntable edge magazine (rolled edge material) • Turntable diameter: 750 mm • Edge thickness: 0.4 – 3 mm • Extendable frame • Workpiece support extendable up to 450 mm • Upper pressure bar • Manually adjustable workpiece height: 8 – 60 mm • Edge feed • For rolls and rigid material • Joining unit • Power: 2.2 kW (2 × 1.1 kW) • Diamond cutter Z2 • Speed: 12,000 rpm • Gluing unit • Teflon-coated for 1.5 kg EVA or PUR granulate • Ready after approx. 10 min heating time • Tool-free quick-change system • Pressure unit • Pneumatically controlled • 1 driven and 2 conical pressure rollers • Shear • For roll edge material thickness: 0.4 – 3 mm • Cutting unit • Two high-frequency motors, each 0.35 kW, 12,000 rpm • Pneumatically swiveling 0° – 10° • Multifunctional milling unit (x-motion PLUS) • Flush and radius milling • One HF motor top and bottom, each 0.75 kW, 12,000 rpm • Each with 4 interchangeable blades • Corner processing unit • For soft and postforming workpieces • Front edge processing • Edge thickness: 0.4 – 3.0 mm • Workpiece height: 10 – 60 mm Lodpfxex D D R Se Agpshi • Radius scraper unit • 2-axis motor-driven, position-controlled • Pneumatic release function • Polishing unit • Top and bottom

Condition: ready for operation (used), Year of construction: 2013, machine/vehicle number: 200.04.007.13, functionality: fully functional, power: 11 kW (14.96 HP), workpiece height (max.): 60 mm, total height: 1,700 mm, total length: 4,800 mm, total width: 900 mm, TECHNICAL DETAILS Workpiece height min.: 8 mm Workpiece height max.: 60 mm MACHINE DETAILS Power: 11 kW Line voltage: 400 V Current: 28 A Phases: 3 Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 4,800 x 900 x 1,700 mm Machine weight: 1,250 kg EQUIPMENT Multifunction milling unit Pre-milling unit Profile milling unit Gluing unit Ledpfx Asyux Egegpshi

Condition: excellent (used), Felder TEMPORA F600 edge bander with glue box Liquids Pre-milling cutters, Glue application with roller, Interchangeable glue tank Second tank included Features glue box, enabling edge banding with PUR glue Pneumatic pre-cut guillotine Lhedjy N Sdyjpfx Agpoi Liquids End-trimming sawblades Top/bottom trimming unit Corner rounding unit, Profile scraper Cleaning fluids Flat scraper Polishing unit The machine has NC control Max workpiece height: 60mm Max edge banding thickness (roll): 3mm Feed rate: 10 m/min Original working distance: 30,000 meters, in my opinion the technical condition is very good Year: 2023 Possibility to inspect and test on site

Condition: ready for operation (used), Year of construction: 2013, operating hours: 20 h, working width: 650 mm, Belt sander manufactured in 2013. This FELDER FW 650 features a working width of 650 mm and a powerful 7.5 kW motor. It includes a variable feed speed ranging from 3.7 to 16 m/min and an automatic belt centering system. The machine comes with interchangeable sanding pads and a rubber contact roller. If you are looking to get high-quality sanding capabilities, consider the FELDER FW 650 machine we have for sale. Contact us for further details. • Sanding belt dimension: 670 × 1900 mm • Motor power: 7.5 kW (upgraded from 5.5 kW) • Voltage: 3 × 400 V • Duty type: S1 • Variable feed speed: 3.7–16 m/min • 1 combination aggregate • Interchangeable sanding pad • Rubber contact roller: 85 Shore Ljdpfsyli H Aox Agpshi • Electropneumatic sanding shoe • 2nd feed speed • Automatic belt centering • Automatic star-delta start (SD start) • Extraction connection: 120 mm • Control: Conventional (non-CNC) • Minimum transport height: 2370 mm • Minimum transport width: 2200 mm Additional equipment • Double-sided roller table extension • Abrasive belts included: • 670 × 1900 mm K80 (12 pcs) • 670 × 1900 mm K120 (12 pcs)

Condition: like new (used), Year of construction: 2024, For sale: Felder RL-160 clean air extraction unit with a maximum air volume flow of 3,200 m³/h. The extraction unit is currently in use as a demonstration model in our showroom and is therefore in as-new condition. Technical data: - Max. air volume flow: 3,200 m³/h - Filter area: 10 m² Lodpfjyh Ai Hex Agpshi - Extraction connection diameter: 160 mm - Manual filter cleaning - H3 dust-tested - Year of manufacture: 2024 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Sale subject to prior sale! Related terms: clean air unit, extraction unit, extraction, clean air, RL Reference: R-A0117

Condition: like new (used), Year of construction: 2020, functionality: fully functional, For sale is a Felder RL-160 clean air extraction unit with a maximum air flow rate of 3,200 m³/h. The extraction unit is in excellent condition and has been inspected and serviced by our specialists. (Fully functional) Technical data: Lhodpjwp Rgmefx Agpsi - Max. air flow rate: 3,200 m³/h - Filter surface: 10 m² - Extraction connection Ø: 160 mm - Manual filter cleaning - H3 dust tested - Year of manufacture: 2020 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: clean air unit, extraction unit, extraction, clean air, RL Reference: R-A0117

Condition: used, Felder K700 panel saw, year of manufacture 2006, good condition, 880 mm table width, 100 mm cutting height, 1300 mm panel table length, approx. 300 kg Lhedjvrvluspfx Agpsi Prices subject to change, errors, printing and typesetting errors reserved

Condition: excellent (used), Year of construction: 2019, Edgebanding machine Manufacturer: Felder Lhjdpexix Hxefx Agpsi Model: Tempora 60.06, F600 Year of manufacture: 2019 Fully automatic operation from the control panel. Jointing unit: Yes End trimming unit: Yes Radius milling unit: Yes Radius scraper: Yes

Condition: like new (used), Year of construction: 2023, Felder FST 160 Sanding Table Technical Data Dimensions [mm]: 1660 x 1020 Working height [mm]: 726–1026 Extraction port diameter [mm]: 140 Year of manufacture: 2023 Price: 1100.- Lhsdjy Agp Djpfx Agpsi

Condition: good (used), Year of construction: 2017, functionality: fully functional, operating hours: 130 h, power: 6.5 kW (8.84 HP), input voltage: 400 V, input frequency: 50 Hz, Further technical data Edge thickness: 0.4–3 mm Workpiece height: 10–45 mm Chain feed with 8 m/min Lhjdjyfvhaspfx Agpei Total running length: 5,864 linear meters Jointing unit with max. 2 mm material removal Strip edgebander in single-feed operation Guillotine for hard PVC/ABS up to 3 mm thickness Teflon-coated glue pot, 1.2 kg capacity, with glue roller End trimming unit, 0.18 kW Extraction connections: 2x 80 mm, 1x 120 mm 2x HW saw blades, D-80 mm, Z16 Multi-milling unit with 12,000 rpm and 0.22 kW, 'Quickset' system for radius, flush and chamfer milling Control panel with LCD display and keypad Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Rotary table for edge banding rolls Minimum workpiece width: 70 mm Minimum workpiece length: 210 mm Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Additional equipment: Surface scraper, mechanically engageable Radius scraper knife

Condition: excellent (used), Thickness planer Felder D963 Max. planing width: 630 mm, Max. planing height: 300 mm, Spiral cutterhead, two rows, Electric height adjustment with readout, Feed with adjustable speed, 7.3 kW motor, Lodpfx Agoxdmu Tjpshi Machine in very good condition.

Condition: excellent (used), Year of construction: 2011, It is in perfect working condition, looks very good and has few operating hours. It has pre-milling, circular saw cutting, up and down milling, radius tickling, surface tickling, and polish. Lsdpfx Ajxwqmasgpjhi

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 432.07.383.14, functionality: fully functional, planing width: 410 mm, number of blades: 4, overall weight: 510 kg, Equipment: CE marking, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Planing width: 410 mm Planer cutterhead: 4-knife Felder system cutterhead Number of planing knives: 4 Feed table length: 2,200 mm Fence: 1,300 x 170 mm MACHINE DETAILS Motor power: 5.5 kW Motor voltage: 400 V Chip removal: 5 mm Dust extraction connection: 120 mm Weight: 510 kg EQUIPMENT Ledozkt Itepfx Agpshi Cutterhead with 410 mm planing width Infeed table with table length of 1,080 mm Fence with ruler 1,300 x 170 mm Fence guard, EURO standard 4-knife Felder system cutterhead