Used Felder G 400 for sale (131)

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: CA.03.013.12, operating hours: 1,555 h, Edge banding machine FELDER G400, used machine / condition as coming in from customer. Machine is functional tested and OK. Without service / warranty for this price. Djdpfx Acsng H Uvspocn Free loaded into your truck/trailer. Directly available ex works Barneveld (NL)

Condition: used, Year of construction: 2021, functionality: fully functional, disc diameter: 400 mm, rotational speed (min.): 915 rpm, power: 1.5 kW (2.04 HP), grinding wheel diameter: 400 mm, type of input current: three-phase, Equipment: emergency stop, motor brake, Felder disc sanding machine CB 400 D, acquired on April 13, 2021, for precise disc sanding of wood workpieces. Suitable for edges, end faces, small components, curves, and fine adjustments in the woodworking shop. Key technical data: - Machine type: Disc sanding machine - Model: CB 400 D - Sanding disc: approx. Ø 400 mm - Speed: approx. 915 rpm - Motor power: approx. 1.5 kW - Voltage: 400 V - Dust extraction connection: approx. Ø 100 mm - Table size: approx. 460 x 200 mm - Table tilt: approx. -45° to +45° - Dimensions: approx. 770 x 460 x 1130 mm Features: Dcedpfxsztxpns Acpon - Practical machine for precise finishing and clean workpiece edges - Suitable for edge and contour sanding, adjusting wood components, and finishing work - Of interest for carpentry shops, model making, training, and makerspaces Warranty exclusion

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Preliminary milling unit Edge banding glue station for granules Capability to glue edge banding from 8-60 mm Feed rate of 11 m per minute Control panel with temperature setting Preliminary trimming of edge banding from a roll Dcodpfx Ajzx Szuscpjn Guillotine for trimming edge banding from a roll Pressing zone with three rollers Cutting wheels to trim excess edge banding on the edges Top/bottom milling unit with profiled milling cutters Profiled sanding unit Flat sanding unit Corner milling unit Polishing unit Year of manufacture: 2013

Condition: used, Year of construction: 2020, Sled length: 3200 mm Cutting width at the rip fence: 1250 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 120 mm Scoring saw: yes Saw blade height adjustment: handwheel Saw blade swivel adjustment: handwheel Rip fence adjustment: manual Dodpozq Dcuefx Acpocn Crosscut fence adjustment: manual Saw blade angle indicator: scale Cutting height indicator: - Rip fence indicator: scale Crosscut fence indicator: scale Saw blade diameter: 400 mm Speeds: 3 Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2200 mm Weight: 800 kg

Condition: good (used), Year of construction: 2016, machine/vehicle number: 0000087, functionality: fully functional, operating hours: 2,202 h, power: 8,000 kW (10,876.96 HP), input voltage: 400 V, input current: 18 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,550 mm, total length: 4,100 mm, total width: 780 mm, overall weight: 990 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Preliminary milling unit Edge banding glue station Capability to glue up to 60mm Feed rate 11m per min Control panel with temperature setting Djdpfszzcc Ijx Acpecn Trimming of edge banding from a roll Guillotine for trimming edge banding from a roll Top/bottom milling unit with profiled milling cutters Polishing unit Year of manufacture 2016 Excellent condition

Condition: used, Year of construction: 2010, functionality: fully functional, – Very good condition – Year of manufacture: 2010 – Operating and maintenance documentation (DTR) available TECHNICAL PARAMETERS: – Edge thickness min. - max.: 0.4 – 3.0 mm – Workpiece thickness min. - max.: 10 – 45 mm – Saw trimming unit – Milling unit for trimming excess edge tape flush or with a profile – Designed to remove excess edge tape at the top and bottom edges of the panel – Flush milling – Milling of the edge tape at an angle or radius in a single work cycle – Edge overhang milling: Ø 70 mm, Z 6, a=15°, R=2 mm – INSPECTIONS CARRIED OUT BY FELDER SERVICE – COMPACT DIMENSIONS – PRECISE AND VERY EASY TO USE – Table dimensions: 2000 x 300 mm – Air supply requirement: 6 Bar – Power supply: 400 V – Power: 3.2 kW – Glue application roller and glue tank – Grooved glue application roller ensures uniform glue coverage on the edge of the workpiece – Feed speed: 9 m/min – Overall dimensions (L/W/H): 2000 x 1260 x 650 mm – Net weight: 360 kg Dodpsw H Rzxjfx Acpscn

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Felder Djdpfx Aez Arwqocpecn Type: G680 Year of manufacture: 2017 Technical data Power supply: 400 V, 3-phase, 50 Hz Power: 7.22 kW Current consumption: 18.6 A CE marking: Yes Equipment: Jointing unit Gluing unit Pressure zone Cutting unit Milling unit Corner rounding unit Scraper blades Polishing unit Additional glue tank Dust extraction connections with flexible hoses Control panel with digital display Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 423.10.100.12, functionality: fully functional, operating hours: 500 h, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, planing width: 400 mm, tool diameter: 88 mm, number of blades: 63, actuation type: manual, rotational speed (max.): 5,000 rpm, total length of planing tables: 2,000 mm, total width: 1,200 mm, total height: 1,100 mm, overall weight: 580 kg, year of last overhaul: 2012, total length: 2,100 mm, cutting height (max.): 5 mm, cutting width (max.): 410 mm, height adjustment type: electric, table height: 888 mm, Equipment: CE marking, documentation/manual, Sliding table saw/spindle moulder combination machine; in very good condition, having seen only light use in a joinery/cabinetmaking context. Purchased in 2012. Available for viewing and testing in Wavre, Belgium; the machine is fully operational for demonstrations. See also my listings for a Felder AD741 planer-thicknesser and a Hammer N4400 bandsaw (same location). Electrical connection: 3 x 400 V, 50 Hz, 4 kW. Cutting length ("X-Roll" sliding table): 2050 mm. Cutting height: 102 mm. Tilting blade (90° to 45°). Removable and tilting spindle moulder shaft (90° to 45°). Scoring unit. Sold with all accessories: - 2 Silent-Power saw blades (315 mm diameter) - 1 Silent-Power saw blade (250 mm diameter) for use with the scoring unit Dcjdpfx Aez Iml Recpsn - Scoring blade (80 mm diameter) - Rip fence (800 mm length) - Mitre fence (2800 mm length) - Eccentric clamp for sliding table (similar to Felder art. no. 400-108) - Spindle moulder fence with fine adjustment + "Euro II" safety guard - Rebating cutter (140 mm diameter; similar to Felder art. no. 04.2.098) - Tongue-and-groove cutter (140 mm diameter; similar to Felder art. no. 04.3.122) - F48 power feeder (4 wheels, 120 mm diameter, 8 speeds) + tilting mount - 3 dust extraction ports: below and above the saw, and at the rear of the spindle moulder fence Dimensions and weight: see manual excerpt (photo).

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit Dcedpfjw I H Rksx Acpjn With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: good (used), Year of construction: 2017, functionality: fully functional, operating hours: 130 h, power: 6.5 kW (8.84 HP), input voltage: 400 V, input frequency: 50 Hz, Further technical data Edge thickness: 0.4–3 mm Workpiece height: 10–45 mm Chain feed with 8 m/min Total running length: 5,864 linear meters Jointing unit with max. 2 mm material removal Strip edgebander in single-feed operation Guillotine for hard PVC/ABS up to 3 mm thickness Teflon-coated glue pot, 1.2 kg capacity, with glue roller Dcjdpfx Acoyfvhaopjn End trimming unit, 0.18 kW Extraction connections: 2x 80 mm, 1x 120 mm 2x HW saw blades, D-80 mm, Z16 Multi-milling unit with 12,000 rpm and 0.22 kW, 'Quickset' system for radius, flush and chamfer milling Control panel with LCD display and keypad Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Rotary table for edge banding rolls Minimum workpiece width: 70 mm Minimum workpiece length: 210 mm Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Additional equipment: Surface scraper, mechanically engageable Radius scraper knife

Condition: excellent (used), Year of construction: 2012, machine/vehicle number: 440.10.008.12, functionality: fully functional, operating hours: 500 h, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 9 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 102 mm, cutting width (max.): 2,600 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: manual, rotational speed (max.): 4,700 rpm, total length: 2,200 mm, total width: 1,500 mm, total height: 1,070 mm, overall weight: 350 kg, table height: 90 mm, year of last overhaul: 2012, Equipment: CE marking, documentation/manual, saw blade guard, Sliding table saw/spindle moulder combination machine; in very good condition, having seen only light use in a joinery/cabinetmaking context. Purchased in 2012. Available for viewing and testing in Wavre, Belgium; the machine is fully operational for demonstrations. See also my listings for a Felder AD741 planer-thicknesser and a Hammer N4400 bandsaw (same location). Electrical connection: 3 x 400 V, 50 Hz, 4 kW. Cutting length ("X-Roll" sliding table): 2050 mm. Cutting height: 102 mm. Tilting blade (90° to 45°). Removable and tilting spindle moulder shaft (90° to 45°). Scoring unit. Sold with all accessories: - 2 Silent-Power saw blades (315 mm diameter) - 1 Silent-Power saw blade (250 mm diameter) for use with the scoring unit - Scoring blade (80 mm diameter) - Rip fence (800 mm length) - Mitre fence (2800 mm length) - Eccentric clamp for sliding table (similar to Felder art. no. 400-108) - Spindle moulder fence with fine adjustment + "Euro II" safety guard - Rebating cutter (140 mm diameter; similar to Felder art. no. 04.2.098) - Tongue-and-groove cutter (140 mm diameter; similar to Felder art. no. 04.3.122) - F48 power feeder (4 wheels, 120 mm diameter, 8 speeds) + tilting mount Dsdjz H Sbbspfx Acpocn - 3 dust extraction ports: below and above the saw, and at the rear of the spindle moulder fence Dimensions and weight: see manual excerpt (photo).

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Press length without side pressing device: approx. 2,300 mm Press length with side pressing device: approx. 2,100 mm Press width, max.: approx. 1,400 mm 4 pcs. vertical pressing units, adjustable, each with 1 crank drive pressing unit, and 1 counter piece 1 pcs. horizontal pressing unit with 2 crank drive pressing units 1 pcs. counter pressure rail, fixedly mounted on the left side 1 pcs. lower support rail with crank drive Dcedpfx Acozn Iwqspjn

Condition: reconditioned (used), Year of construction: 2010, Voltage 400V 3~ 50Hz 7.22kW Control panel with LCD display and keypad Jointing unit with 2 counter-rotating diamond cutters Corner rounding unit for edge faces Manual unit adjustment Edge thickness 0.4-5.0 mm (optionally 8 mm) Workpiece height 8-60mm Feed speed 11 m/min Dcodpfx Aoyf I T Uecpsn 3 free slots for finishing units Edge feed for coil and strip material Scraper knife

Condition: used, machine/vehicle number: G-KF131799aH, Format circular saw milling machine Hammer B3 Winner, year of manufacture 2023, as new, standard equipment, 2x3 kW, 2000 mm table length, 500 kg Prices subject to change, errors, printing and typesetting errors reserved Dodpfxsvw Ects Acpscn

Condition: used, machine/vehicle number: G-ADHM118054aR, AD planer Hammer A3-41, year of manufacture 2019, very good condition, including reversible blade and chassis, 4 kW, 1800 mm table length, 410 mm table width, 3 blades, 350 kg Prices subject to change, errors, printing and typesetting errors reserved Dcjdpfx Aovw Ebpjcpjn

Condition: good (used), Year of construction: 2008, power: 5.5 kW (7.48 HP), type of input current: three-phase, cutting height (max.): 104 mm, Equipment: CE marking, documentation/manual, saw blade guard, scorer, I am selling a high-quality Felder K700 panel saw, manufactured in 2008. The machine is in good, well-maintained condition and is fully functional. Ideal for carpentry shops, joineries, or ambitious woodworkers. Technical data: + Manufacturer: Felder + Model: K700 + Year of manufacture: 2008 + Motor power: 5.5 kW + Voltage: 400 V (three-phase) + Saw blade diameter: up to approx. 315 mm + Cutting height: approx. 100 mm at 90° + Cutting height at 45°: approx. 70 mm + Main saw blade speed: approx. 4000–5000 rpm + Sliding table length: approx. 2,600 mm + Rip fence length: corresponds to the sliding table Dcjdpfjywlkiex Acpen + Parallel fence: finely adjustable with scale + Miter fence: with fence guide + Dust extraction port: available (top and bottom) Equipment: + Smooth-running, precise aluminum sliding table + Robust cast iron table + Scoring saw (belt missing / never used) + Height- and swivel-adjustable saw blade (0–45°) + Safety guard with dust extraction + Precise cutting guidance through stable fences + Low maintenance and long-lasting Other: Inspection and test run possible by arrangement. Shipping via freight forwarder is possible. Loading can be assisted. Price: €4,250

Condition: used, AD planer Felder AD741, very good condition, year of manufacture 2003, 4 kW S6, 400 V, 410 mm table length, 2000 mm table width, 4 knives, approx. 400 kg Prices subject to change, errors, printing and typesetting errors reserved Dsdpfx Ajvrvkdecpocn

Condition: like new (used), Year of construction: 2023, Felder FB 510 Professional Wood Band Saw – 2023 – Made in Austria For sale: Felder FB 510 professional band saw, manufactured by Felder Group (Austria). This is a high-quality, industrial woodworking machine designed for precise cutting and heavy-duty workshop use. The machine features a robust frame and a large cast iron table, ensuring stability, accuracy, and a long service life. Technical Specifications Model: Felder FB 510 Year of manufacture: 2023 Motor power: 3.0 kW Power supply: 400 V / 3 Phase / 50 Hz Current: 6.4 A Blade length: 4293 – 4343 mm Blade width: 6 – 25 mm Max cutting height: approx. 410 mm Max cutting width: approx. 490 mm Heavy-duty cast iron table Made in Austria Condition This machine is in very good working condition, well-maintained and ready for immediate use. Ideal for: Dcsdsyq N Azepfx Acpsn Carpentry workshops Furniture production Wood processing facilities Professional woodworking applications

Condition: used, functionality: fully functional, – Austrian manufacture – DTR (technical documentation) included – not repainted – compact design – occupies very little space TECHNICAL SPECIFICATIONS: – edge thickness: 0.4–2.0 mm – workpiece thickness: 10–50 mm – feed speed: 5.5 m/min – height to table surface: 880 mm – table dimensions: 1800 x 300 mm – workpiece support Dcsdpfxsw H Rrws Acpon – total power: 2 kW – power supply: 400 V, 50 Hz – electronic glue temperature control: 20–250°C – compressed air pressure: 6 bar EQUIPMENT: – feed plate – tape feeder – guillotine for pre-cutting – glue applicator – 3 pressure rollers – guillotine for front/rear tape cutting – 2 milling units: top/bottom – dimensions (L/W/H): 2050/930/1280 mm – weight: 290 kg

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale is a Format4 c-express 920 classic CNC drilling and dowel processing center from Felder. This machine is ideally suited for efficient processing of carcass and furniture components. It enables precise drilling, milling, and dowel processing and is particularly designed for carpentry shops, joineries, and furniture manufacturing. Thanks to its compact design and powerful CNC control, the processing center is ideal for economical single-piece and series production. The machine is in a well-maintained, used condition and can be inspected and tested under power by appointment. Technical data: Manufacturer: Format4 (Felder Group) Type: c-express 920 classic with additional front and rear support roller tables Operating hours: approx. 800 Dcodpfx Acezrwmiopen Year of manufacture: 2016 LxWxH: 2100x1605x1950mm Weight: 850kg Motor power drilling head: 1.5kW Drilling head speed: 3600 rpm Circular saw unit speed: 9000 rpm Horizontal spindles (max.): 2+2, 1+1 Vertical spindle (max.): 9 Distance between horizontal spindles: 32mm Distance between vertical spindles: 32mm Diameter horizontal spindles max.: 15mm Diameter vertical spindles max.: 8 x 15 mm, 1 x 35 mm Diameter circular saw blade max.: 100mm Max. drilling depth: Horizontal 30mm, Vertical 55mm Voltage: 400 V 3 phases Frequency: 50 Hz Connected load: 7.0 kW Operating mode: S6 40 % CNC-controlled processing center Automatic workpiece feed Operating PC with screen, keyboard, and mouse Foot switch Dust extraction connection Drilling and dowel processing Workpiece support table with rollers Safety enclosure Application areas: Furniture manufacturing Carcass production Dowel processing Drilling patterns Row drilling Hardware drilling Interior construction Carpentry Joinery The machine can be inspected and tested under power by appointment. Transport is possible for an extra charge! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information without guarantee.

Condition: used, AD planer Hammer A3, year 2018, in very good condition, hardly used, 310mm planing width, incl. 1 set of spare knives (reversible knives), 3 kW, 3 knives, 300 kg Dodpfswzzfksx Acpecn Subject to price changes, errors, and misprints.

Condition: used, Year of construction: 1991, machine/vehicle number: 78-08/093-91, functionality: fully functional, planing width: 400 mm, Combined Planer Thicknesser Felder AD 6-41 Year of manufacture: 1991 S/N 78-08/093-91 In good condition Planing specifications Planing width: 410 mm Thicknessing width: 404 mm Thicknessing height: approx. 4 – 220 mm Maximum chip removal: 5 mm Dedpjywfbuofx Acpjcn Cutter block / cutting data Cutter block diameter: approx. 86 mm Number of knives: 2 Cutter block speed: approx. 4,700 rpm Table / Construction Total length of planing tables (standard): approx. 1,680 mm Feed Feed speed: stepless, approx. 6.5 m/min with digital height adjustment Electrical data Motor power: 4.0 kW (5.5 HP) Voltage: 400 V three-phase (typical for this series) Extraction connection approx. 120 mm Weight approx. 800 kg

Condition: like new (used), For sale is a used Felder K-540S panel saw with a cutting length of 3200 mm. The machine was only used for a short period and has been inspected and refurbished by our service team. Technical specifications: Dcsdpfx Aozil Ebocpen - Cutting length 3200 mm - Cutting width 850 mm - Cutting height 140 mm - Max. saw blade diameter 400 mm - Height-adjustable + tilting - Incl. protractor scale - Motor power 5.5 kW / 7.5 hp - Year of manufacture 2023 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: Panel, circular saw, panel saw, Felder Reference: R-L0B9N

Condition: like new (used), functionality: fully functional, Exhibition machine For sale is our Felder RL-125 clean air extraction unit from our showroom, with a maximum air flow rate of 1900 m³/h. The extraction unit is in like-new condition and has been inspected and refurbished by our qualified personnel. Technical data: - Clean air extraction unit RL-125 - Extraction connection 125 mm - Manual filter cleaning - Max. air flow rate 1,900 m³/h - Chip container with a capacity of 200 liters - 3 kW (4 hp) motor / 400 volts - H3 certified! Dedpfxjzrnqlj Acpecn The clean air unit is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-D1618

Condition: like new (used), Year of construction: 2023, For sale is a demonstration Felder FB-710 bandsaw with a cutting width of 690 mm. The machine was only briefly used at our premises for demonstration purposes. It is therefore considered as new and is offered with full warranty / guarantee. Technical specifications: - Table size: 840 x 700 mm - Cutting height: 460 mm - Cutting width: 690 mm - Table tilt: -5° to +45° - Saw blade length: 5120 mm - Weight: approx. 400 kg - Motor power: 7.5 HP Djdpfxeww Hhvs Acpscn - Exhibition machine - Year of manufacture: 2023 The bandsaw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: bandsaw, saws, saw, band Reference: R-A0117-67