Used Felder Bf 5 31 for sale (147)

Condition: excellent (used), Year of construction: 1999, operating hours: 650 h, functionality: fully functional, power: 4 kW (5.44 HP), Well-maintained, lightly used, powerful professional machine with 5 combined functions. Numerous accessories included. Features a circular saw and table router with sliding table, jointer and thickness planer, as well as a mortise drilling unit. 360 V The machine is available for sale immediately. It is located in a ground-level basement in 23858 Reinfeld. Transportation is the responsibility of the buyer. Knjdpfxezn I Aaj Akxeb

Condition: excellent (used), functionality: fully functional, !!!DEMO MACHINE!!! For sale is a used Felder combination machine CF5-31 with a maximum thickness of up to 230 mm. The machine is in very good condition and has been refurbished and inspected by our qualified personnel. (fully functional) Technical data: - Planing and thicknessing width 310 mm - 4-knife cutterblock (reversible knives) - Thickness capacity 4-230 mm - Folding planing table - Adjustable planing fence 90-45° - Tilting circular saw and router 90-45° - Sliding table 1300 mm - Miter fence 1300 mm - 4 router speeds 3000/6000/8000/10000 rpm - Router fence 230 mm - 3 motors, each 5.5 hp (4 kW), 400 volts - Machine No. 440.10.242.17 The combination machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Knodozliiiopfx Akxsb Related terms: Planer, thicknesser, thickness, Felder, router, routing machine, circular saw, saw Reference: R-D1618

Condition: good (used), Year of construction: 1990, functionality: fully functional, planing width: 310 mm, cutting width at rip fence: 80 mm, Panel saw, milling machine, planer, mortising machine, combination woodworking machine, table saw, circular saw, joiner's saw, panel saw, table router, tilting spindle moulder Manufacturer: FELDER Model: BF6-31 Year of manufacture: 1990 Sliding carriage: 1.6 m Manual height adjustment for saw blade Manual tilting of the saw blade up to 45° Knjdpfx Ajyzdnbskxeb Rip fence with fine adjustment up to approx. 80 cm Support table Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the spindle Manual spindle tilt up to 45° to the rear Spindle diameter: 30 mm 3 speeds, adjustable by belt Spindle retractable below table and removable Motor power of milling unit: 3 kW Milling fence with fine adjustment Surface and thickness planer Planing width: 31 cm Maximum workpiece height: approx. 22 cm Central dust extraction hood for planing and thicknessing Tilting fence 2-knife Felder cutterblock system Motor power: 3 kW Mortiser Single-lever control Workpiece hold-down Chuck up to 16 mm

Condition: excellent (used), Year of construction: 2021, For sale is a high-quality Format4 Profil 45 M from Felder. This machine was manufactured in 2021 and is in excellent condition. The Profil 45 M is a heavy-duty, precision swivel spindle table saw designed for professional use. The electric adjustment of the milling spindle and the fence allows for comfortable, quick, and very precise operation. Features and technical data: +Manufacturer: Format4 / Felder +Type: Profil 45 M +Year of manufacture: 2021 +Condition: very good +Robust and low-vibration industrial design +Stable cast iron milling table +Electric height adjustment of the milling spindle +Electric milling spindle swivel from -5° to 45° +Digital display for spindle height and swivel angle +Milling spindle quick-change system +Milling spindle diameter: 30 mm +Usable spindle height above the table: 140 mm +Milling spindle lock from the outside +Five speeds: 3,500 / 4,500 / 6,000 / 8,000 / 10,000 rpm +Right and left rotation +Large milling table opening: 320 mm +Milling fence for tools up to a maximum diameter of 250 mm +Electromotive MULTI adjustment system for the milling fence +Digital display of the fence position +Anodized aluminum fence scales +Working height: approx. 890 mm +Dust extraction connections on the milling fence and under the table +Weight depending on equipment: approx. 730 kg +Operating voltage: 400 V Comfortable and precise operation: The height and angle of the milling spindle are conveniently adjusted electrically and read off precisely via digital displays. The milling fence can also be adjusted electromotively. This allows for quick, precise, and reproducible adjustments. The milling spindle quick-change system enables rapid tool or spindle changes and significantly reduces setup times. The milling fence can be conveniently folded away for tool changes. Thanks to the large table opening, even larger milling tools can be safely used below the table. The rear-swiveling milling spindle ensures comfortable workpiece guidance, good chip removal, and allows for the trouble-free use of a feed device even when swivel milling. An extremely stable and user-friendly table saw for demanding milling operations, individual pieces, and professional series production. -Inspection and a test run are possible after prior arrangement. -Loading on-site is no problem. -You will receive an invoice with VAT shown. -Price: €10,500 net Knsdpfxszz Nm Ts Akxeb

Condition: excellent (used), For sale is a used Felder AD5-31 jointer-thicknesser with a planing length of 1500 mm. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition. Technical data: - 4-knife cutterblock - Planing width 310 mm - Planing length 1500 mm - Max. workpiece height 230 mm - Suction port Ø 120 mm Knsdpfx Ajw Hcygskxob - Motor power 4 kW / 5.4 HP - Year of manufacture 2022 The machine is located at A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Contact: Tel. 06244-20299. Related terms: jointer, thicknesser, planer, jointer-planer, thickness planer Reference: R-A0117

Condition: used, Year of construction: 2011, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input current: 10 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: documentation/manual, saw blade guard, We are offering this used FELDER K-915 panel saw, manufactured in 2011. It is well-suited for the requirements of a carpentry workshop. Inspection and a test run can be arranged at our workshop in Dresden. Ksdpfxez Ad Syj Akxjnb Type: K-915 Model number: 431.03.132.11 Voltage: 400.0 V Phases: 3 Frequency: 50 Hz Power: 5.5 kW Duty cycle: S6-40% Current consumption: 10.1 A Year of manufacture: 2011 If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: as good as new (ex-display), Code: N0249 Brand: HAMMER - FELDER - AUSTRIA Model: C 3 31 - CE Standard Universal 5-works combined machine - CE Standard Planer width 310 mm Table length 1400 mm Helical planer spindle “Sylent Power” with reversible blades Kedpfx Ajzqgduskxonb Thickness height 225 mm Circular saw unit tiltable 0-45° Cutting height 103 mm Scoring unit Aluminium carriage 2000 mm Spindle moulder unit diameter 30 mm – 4 speeds Motor power 4 Hp

Condition: used, Year of construction: 2020, Sled length: 3200 mm Cutting width at the rip fence: 1250 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 120 mm Scoring saw: yes Saw blade height adjustment: handwheel Saw blade swivel adjustment: handwheel Rip fence adjustment: manual Crosscut fence adjustment: manual Saw blade angle indicator: scale Cutting height indicator: - Rip fence indicator: scale Crosscut fence indicator: scale Saw blade diameter: 400 mm Speeds: 3 Motor power: 5.5 kW Knjdszq Dcuspfx Akxeb Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2200 mm Weight: 800 kg

Condition: used, Year of construction: 2020, max. workpiece length 3740 mm profile spindle 1 Stück main drive 15 kW Control CNC Felder Format4 Type Profit H500S 16.38 CNC Machining Center to be sold on behalf of our customer ----- - From a wood window manufacturing company. - Machine still connected and ready for demonstration - Without machining tools Technical description (summary, full text see PDF): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depending on clamping system, see layout. Ksdpfx Akjyq Sztoxonb Travel: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speed: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional C-axis locking - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles (7 spindles in the X direction, 5 spindles in the Y direction, grooving saw in the X direction) Horizontal drilling unit with 6 spindles, 4 spindles in the X direction and 2 spindles in the Y direction. 1 groove saw in the X direction, max. diameter 120 mm - Tool changer with 24 tool positions on the right side of the machine stand max. workpiece diameter 240 mm max. tool height 370 mm - Tool changer for circular saw blade mounted on the boom/tool changer max. saw blade diameter 350 mm - Tool changer on the left side of the machine stand with 10 tool positions. Max. workpiece diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - 24-position tool changer mounted on the boom, moving in the X-direction Max. workpiece diameter 240 mm Max. tool height 370 mm - Moving pick-up area for chip deflector plate - 6 workpiece supports with s-motion position control - 2 machining areas for pendulum machining - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved machining - Includes all existing solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety device - "WoodFLash" software Lamello Clamex P Macro Notching Macro software - "Greenline package" for reduced energy consumption ----- Price of the above machine on Inquiry! ----- NOTE VIDEO: Not an original video. The video is from the machine manufacturer and shows a machine of this type. Option: New Oppold tool set for H500. The customer reused the existing tooling—previously employed on this H500—for their new machine. A brand-new tool set, matching the programming already established on the machine, costs €50,000. -Windows Timber windows IV 68, 78, and 88 (inward-opening), with stepped rebate on sides and top. 20 mm glazing rebate; frame and sash profiles with 20° slope For loose and integral glazing beads Renovation-style timber windows IV 68, 78, and 88 (inward-opening), without rain rail, with stepped rebate on sides, top, and bottom. 20 mm glazing rebate; frame and sash profiles with 15° slope Attached drip rail Timber-aluminum windows (System provider: Gutmann Mira, sloped rebate system) HA IV 68, 78, and 88, inward-opening; 2 sash variants: square and sloped, Stepped rebate at bottom, sides, and top -Entrance doors Timber entrance doors (IV 68, 78, and 88) with single rebate in frame a...

Condition: excellent (used), Year of construction: 2010, Panel saw Manufacturer: Felder Type: Kappa 550 Year of manufacture: 2010 Knjdpfxozy Uzyo Akxeb Sliding table length: 3,200 mm Cutting width: 1,250 mm Cutting height: max. approx. 204 mm Power: 7.5 kW Max. saw blade diameter: 550 mm Height adjustment: Electric Angle adjustment: Electric Cutting width display: Digital Scoring saw: No Motor brake: Yes

Condition: good (used), Year of construction: 2016, functionality: fully functional, input voltage: 240 V, year of last overhaul: 2026, Equipment: CE marking, Machine in excellent condition Ksdpfx Ajzzmfyskxjnb

Condition: used, Year of construction: 2011, with new infeed roller Machine in operation used in top condition low mileage cleaned functionally tested partially refurbished Manufacturer: Felder Type: D 951 Year of manufacture: 2011 Machine No.: 431.01.365.11 GS-tested CE type-tested GS-tested for wood dust Segmented pressure beam Rubber infeed roller Rubber outfeed roller Ksdpfxjzzfacj Akxonb Feed rate infinitely adjustable Feed rate m/min: 4 - 16 Number of knives: 4 automatic motor brake Digital display for planing height electric height adjustment with tip fine adjustment Sound insulation Motor kW: 5.5 Planing width approx. mm: 500 Planing height approx. mm: 250 Dust extraction connection mm: 140 Space requirement approx. L x W x H mm: 100x100x1100 Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty and guarantee

Condition: excellent (used), Year of construction: 2019, Edge banding machine Manufacturer: Felder Type: Tempora 45.03 L Year of manufacture: 2019 Workpiece thickness: 8-45 mm Edge thickness: max. 3 mm Min. workpiece length: 140 mm Feed rate: 9 m/min Total power consumption: 14.5 kW Number of workpieces: approx. 75,400 pieces Total edge length: approx. 59,300 m Jointing unit: Yes Miter saw unit: Yes Flush trimming unit: Yes Knodpfx Aszlr Nfskxob Corner copying unit: Yes Radius drawing blade: Yes Straight drawing blade: Yes Buffing unit: Yes Spray device: Yes

Condition: used, Year of construction: 2021, functionality: fully functional, power: 10 kW (13.60 HP), input voltage: 400 V, input current: 11 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, saw blade guard, scorer, Format panel saw / table saw Format4 Kappa 550 by Felder, purchased on May 26, 2021, for precise longitudinal, cross, and miter cuts in wood and panel materials. Professional saw for carpentry, interior design, and workshop use. Key technical data: - Machine type: Format panel saw / table saw - Saw blade diameter: 250–550 mm - Max. cutting height: approx. 202 mm at 90° / approx. 140 mm at 45° - Swivel range of the saw unit: 0°–46° - Cutting width: depending on the model, approx. 1000 / 1250 / 1600 mm - Cutting length: depending on the model, approx. 2200–3700 mm - Speeds: 3000 / 4000 / 5000 rpm, optionally infinitely variable 2000–6000 rpm - Motor power: approx. 10 KW - Precise format table for repeatable, accurate cuts - Suitable for solid wood, panel materials, and precise furniture / interior design work - Core machine for professional woodworking shops, carpentry workshops, training workshops, and makerspaces Ksdpfxozuywij Akxonb No warranty.

Condition: excellent (used), Year of construction: 2011, working width 950mm 1 kombi unit pneumatic segmented pad two feeding speed electric table regulation pneumatic oscillation Knsdjzxyrzepfx Akxsb motor power 11kW year of production 2011

Condition: good (used), Year of construction: 2000, functionality: fully functional, Used FELDER CF 731 S Professional combination machine, manufactured in 2000. Compact and versatile woodworking machine with a panel saw, table router, jointer, and thickness planer. The machine features a sliding table with a cutting length of approximately 2,700 mm, as well as a large extension table with a rip fence. The planing unit is equipped with a 4-knife cutterhead. The router spindle is pivotable and has a router fence with a protective cover. Thanks to its extensive features, the machine is particularly suitable for carpentry shops, joineries, and smaller workshops. Technical data / Equipment Manufacturer: FELDER Type: CF 731 S Professional Year of manufacture: 2000 Machine No.: 80-02/140-00 Voltage: 400 V Frequency: 50 Hz Motor power: 4 kW Rated current: 8.6 A Speed: approx. 3,400 rpm Panel saw: Sliding table Cutting length approx. 2,700 mm Extension table Rip fence with measuring scale and fence flap Parallel fence Saw unit pivotable Height adjustment via handwheel Table router: Pivotable router spindle Router fence Router guard Height and angle adjustment Dust extraction connection Jointer/Thickness planer: 4-knife cutterhead Jointer fence Jointer tables can be folded up Thickness planer Mechanical height adjustment The machine is in used condition with corresponding signs of wear. The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Knjdozzaw Aepfx Akxsb Transport is possible for an extra charge! Technical data and equipment may vary. Errors, prior sales, and changes are subject to change. All information without guarantee.

Condition: used, Year of construction: 2021, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, actuation type: manual, Felder table router F 500 M, acquired on March 25, 2021, for profiling, rabbeting, grooving, and edge processing of wood pieces. A classic stationary router for professional woodworking shops. Key technical data: - Machine type: Table router / Spindle router - Model: Felder F 500 M - Spindle diameter: Ø 30 mm - Usable spindle height: approx. 100 mm above the table - Table opening: approx. 180 mm - Spindle speeds: 3000 / 6000 / 8000 / 10,000 rpm - Max. tool diameter at the router fence: approx. 220 mm - Motor power: 4.0 kW - Working height: approx. 916 mm - Weight: approx. 300–320 kg depending on the version - Dust extraction port: approx. 120 mm at the router fence Kodeztxt Hepfx Akxonb No warranty.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Year of manufacture: 2022 11 kW motor Kjdpszcgbxefx Akxsnb 350 mm pipe connection Filter area: 71 m² Dimensions: 270 x 120 x 230 cm Weight: 850 kg Chip capacity: 2 x 250 liters Nominal flow rate: 6920 ccm/h Mobile Pneumatic filter cleaning Dry extinguishing system

Condition: used, Year of construction: 2021, functionality: fully functional, power: 3.3 kW (4.49 HP), input voltage: 400 V, input current: 6 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 410 mm, cutting width (max.): 480 mm, Equipment: CE marking, motor brake, Felder FB 510 vertical band saw, purchased on May 26, 2021, for cutting curves, making lengthwise cuts, and creating shaped cuts in wood and wood-based materials. A robust workshop machine for cutting to size, model making, furniture construction, and training purposes. Key technical data: - Machine type: Vertical band saw - Model: Felder FB 510 - Cutting height: approx. 410 mm - Cutting width / throat: approx. 480 mm - Roller diameter: approx. 500 mm - Table size: approx. 500 x 640 mm - Table tilt: approx. -10° to +45° - Band saw blade length: approx. 4318 mm Ksdpfx Aezun Szjkxjnb - Band saw blade width: approx. 6–25 mm - Cutting speed: approx. 1100 m/min or 1450 m/min, depending on the model - Motor power: approx. 3.3 kW - Dust extraction: 2 dust extraction ports - Weight: approx. 250 kg - Versatile machine for curve cuts, contour cuts, ripping, and general cutting - Suitable for solid wood and wood-based materials - Of interest to woodworking shops, model makers, training centers, and makerspaces No guarantee.

Condition: like new (used), CNC machining center profit H80 21.31 Working area: X 3090, Y 2100, Z 85mm X and Y axis speed - 25m/min, Z axis - 15m/min 10KW milling spindle, HSK - F63 Spindle cooling: air Linear tool changer - 15 positions Kjdpoz A Dwyofx Akxonb Drilling head with 8 spindles, 6 in the X axis, 2 in the Y axis 2 vacuum pumps with a suction capacity of 500m3/h Condition: excellent for a used machine Only 125 operating hours

Condition: used, Year of construction: 2004, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 104 mm, cutting width (max.): 1,300 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, saw blade bore: 30 mm, actuation type: electric, Equipment: CE marking, saw blade guard, - Made in Austria - Year of manufacture: 2004 - X-Roll carriage guidance system Knodszinkyepfx Akxeb - DTR and CE operating manual - Digital display for the parallel guide TECHNICAL SPECIFICATIONS: - Carriage length: 2800 mm - Cutting width from the right side: 1300 mm - Blade diameter: max. 315 mm - Scorer diameter: 120 mm - Main motor: 4 kW - Scorer motor: 0.75 kW - Height adjustment motor: 0.5 kW - Electric height adjustment - Manual angle adjustment: 0° - 45° - Three types of blade rotational speed - Max. cutting height: 104 mm - Option to install a cutter: thickness: 6 - 20 mm - Max. diameter: 250 mm - Ratchet - Movable guard - Nozzle diameter: 80 and 120 mm - Dimensions (L/W/H): 320 / 210 / 170 cm - Weight: ~ 950 kg

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, planing width: 510 mm, number of blades: 4, overall weight: 430 kg, extraction nozzle diameter: 120 mm, For sale is a used FELDER AD 7-51 surface and thickness planer, manufactured in 1998. This machine impresses with its robust cast iron construction, high precision, and the typical Felder durability. With a planing width of 510 mm, the AD 7-51 is ideal for carpentry workshops, joineries, furniture manufacturing, and professional interior design. The machine is in used condition and offers a powerful combination of surface and thickness planing for daily workshop use. Equipment: • Surface and thickness planer in one machine • Robust industrial design • Precise cast iron guide tables • Self-adjusting planer knives • Powerful 4 kW drive • Proven Felder quality machine Ksdpozwnmqofx Akxsnb • Ideal for solid wood and furniture construction • Thicknessing unit with central, electric height adjustment • Feed rate for thicknessing: 6 m/min and 12 m/min • Thicknessing capacity: 4-220 mm • Massive cast iron surface planing tables for vibration-free operation • Planer shaft with 4 system planer knives • Surface planing table length: approx. 2,050 mm

Condition: good (used), Year of construction: 2008, power: 5.5 kW (7.48 HP), type of input current: three-phase, cutting height (max.): 104 mm, Equipment: CE marking, documentation/manual, saw blade guard, scorer, I am selling a high-quality Felder K700 panel saw, manufactured in 2008. The machine is in good, well-maintained condition and is fully functional. Ideal for carpentry shops, joineries, or ambitious woodworkers. Technical data: + Manufacturer: Felder + Model: K700 + Year of manufacture: 2008 + Motor power: 5.5 kW + Voltage: 400 V (three-phase) + Saw blade diameter: up to approx. 315 mm + Cutting height: approx. 100 mm at 90° + Cutting height at 45°: approx. 70 mm + Main saw blade speed: approx. 4000–5000 rpm + Sliding table length: approx. 2,600 mm + Rip fence length: corresponds to the sliding table + Parallel fence: finely adjustable with scale Kedpfx Akeywlkijxjnb + Miter fence: with fence guide + Dust extraction port: available (top and bottom) Equipment: + Smooth-running, precise aluminum sliding table + Robust cast iron table + Scoring saw (belt missing / never used) + Height- and swivel-adjustable saw blade (0–45°) + Safety guard with dust extraction + Precise cutting guidance through stable fences + Low maintenance and long-lasting Other: Inspection and test run possible by arrangement. Shipping via freight forwarder is possible. Loading can be assisted. Price: €4,250

Condition: used, Year of construction: 2009, functionality: fully functional, working width: 950 mm, grinding width: 950 mm, - Austrian-made - Year of manufacture: 2009 - Combination pad (trzewik kombi) TECHNICAL PARAMETERS: - Sanding width: 950 mm - Sanding height: 4–170 mm - Main motor power: 11 kW - 1st unit: rubber drum with pneumatic engagement - Drum diameter: 110 mm - 2nd unit: combination pad (trzewik kombi) - Cleaning brush: 1.1 kW Knsdpfjxlr U Isx Akxsb - Pneumatic engagement of rubber drum - Pad with pneumatic engagement - Pneumatic oscillation - Air blower on sanding belt - Electric height adjustment - Sanding belt speed controlled by inverter - Electronic positioning of sanding height - Two feed speeds: feed motor power 0.55 kW - Minimum workpiece length: 400 mm - Extraction port diameter: 3 x 130 mm and 2 x 80 mm - Machine dimensions (L/W/H): 170 x 150 x 210 cm - Weight: approx. 800 kg

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit Knodpfxow I H Rko Akxjb With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim