Used Felder Bf for sale (124)

Condition: used, Combined Machine FELDER BF6-26 -used- Tilting circular saw, Angle-mitre fence, Tilting spindle moulder, Spindle moulder with forward and reverse rotation, Self-adjusting cutterblock ----- Technical Data ----- Planing width: 260 mm, Number of knives: 2 pcs, Hedpfx Aksxlt Shobjl Cutterblock diameter: 86 mm, Passage height: 220 mm, Planer table length: 1300 mm, Cutting width: 780 mm, Circular saw tilting range: 0-45°, Spindle moulder diameter: 30 mm, Spindle moulder tilting range: 0-45°, Usable spindle moulder length: 120 mm, Max. cutter diameter: 220 mm, Max. retractable cutter diameter: 180 mm, Spindle speeds: 3500/6100/7800 rpm, Motors: 3 units, Extraction port for planer: 120 mm, Extraction port for saw: 120 mm, Extraction port for spindle moulder: 120 mm

Condition: good (used), Year of construction: 1990, functionality: fully functional, planing width: 310 mm, cutting width at rip fence: 80 mm, Panel saw, milling machine, planer, mortising machine, combination woodworking machine, table saw, circular saw, joiner's saw, panel saw, table router, tilting spindle moulder Manufacturer: FELDER Model: BF6-31 Year of manufacture: 1990 Sliding carriage: 1.6 m Manual height adjustment for saw blade Manual tilting of the saw blade up to 45° Rip fence with fine adjustment up to approx. 80 cm Support table Mitre fence Main motor power: 3 kW Tilting spindle moulder Manual height adjustment of the spindle Manual spindle tilt up to 45° to the rear Spindle diameter: 30 mm 3 speeds, adjustable by belt Spindle retractable below table and removable Motor power of milling unit: 3 kW Milling fence with fine adjustment Surface and thickness planer Planing width: 31 cm Maximum workpiece height: approx. 22 cm Central dust extraction hood for planing and thicknessing Tilting fence 2-knife Felder cutterblock system Motor power: 3 kW Mortiser Single-lever control Workpiece hold-down Chuck up to 16 mm Hedpfxjyzdnbj Akbel

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, Edge banding machine Tempora F 60.06 Hodpfx Aex Ha I Uekbol - Year of manufacture: 2018 - Exchangeable glue pot - Units for pre-milling, end trimming, flush cutting, milling, radius scrapers, surface scrapers, buffing wheel - With separation agent and cleaning agent application - Spray device - Edge thickness: 0.4-6 mm - Installation length: 3220 mm - Saw trimming Transport possible at extra cost!

Condition: used, Year of construction: 2019, incl. 4-roller feed unit Felder Variofeed 4 (3-18 m/min.) electronically controlled height and angle adjustment milling spindle D=30 mm Centrex access protection for milling milling fence max. cutter diameter 250 mm infinitely variable fine adjustment of the take-off side +35/-10 mm with digital display complete fence position-controlled adjustable milling fence can be folded up and down milling fence rails 550 mm ALU anodized with safety rulers quick clamping of the milling fence extension frame 1270 mm with emergency stop EURO run-in protection 5.5 kW motor with variable speed control speed range: 1500 - 10000 rpm speed range: 8000 - 15000 rpm HG spindle control panel at eye level with x-motion control table size: 1160 x 770 mm table opening: 320 mm swing-away device for feed unit on F 900 incl. extension for feed unit Hsdoy H Hf Tepfx Akbsl Location: Supplier

Condition: used, Year of construction: 2016, Sliding table 2800 mm, cutting width 1250 mm, controlled parallel fence, kappa 400 X, tilting saw unit 45°, saw blade diameter: 250 - 400 mm, max. cutting height: 133 mm, electric height adjustment, motor 5.5 kW, 3 speeds: 3500/4500/7500 rpm. X Motion screen control (touch function) at eye level, additional scoring function, easy-lock quick-change system for main saw blade. Location: Supplier Hjdsy H Hftspfx Akbel

Condition: used, Year of construction: 2007, Extraction connection: 200 mm Max. air flow: 4000 m³/h Filter area: 20 m² Sound pressure: 70 dB Chip volume: 400 l Space requirement: 1775 x 898 x 2005 mm Storage location: Nattheim Hsdpfx Ajy Hry Aokbsl

Condition: excellent (used), Year of construction: 2021, Sawblade tiltable 45 ° Length of the rolling table ~ 1.400 mm cutting width ~ 840 mm Motor output 7,3 kW Cutting height ~ 100 mm weight of the machine ca. ~ 500 kg Bench space and sliding table saw Felder type K 700 for precise longitudinal, cross and format cutting of solid wood, panel materials and similar materials. The machine combines the advantages of a compact bench saw with a sliding table and is ideal for joineries, furniture construction and interior fittings. It has a tilting saw blade and is equipped with a digital rip fence. Hsdpoy Erygofx Akbsl

Condition: excellent (used), Year of construction: 2023, DEMONSTRATION MACHINE! For sale is a used Felder KF 700 SP sliding table saw & spindle moulder with a cutting width of 800 mm. The machine is in excellent condition and has been refurbished and inspected by our professional staff. (Fully functional) Technical data: - Tilting circular saw and spindle moulder 90-45° - Sliding table 2500 mm - Extension table with mitre fence 2600 mm - Rip fence with fine adjustment - Cutting width 800 mm - Spindle fence with multi-adjustment system - 4 spindle speeds - 3 motors, each 7.5 HP (5.5 kW) - Automatic star-delta start The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: saw, circular saw, spindle moulder, combination machine, combi machine, milling machine Hjdpfx Asy Hgxmokbel Reference: R-D1618

Condition: used, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting width (max.): 1,250 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, cutting length (max.): 3,000 mm, cutting height with scoring (max.): 40 mm, cutting width at rip fence: 1,250 mm, trimming length: 3,000 mm, Equipment: saw blade guard, - Austrian-made - With scorer TECHNICAL SPECIFICATIONS: - Table carriage length: 3000 mm - Max. main blade diameter (without scorer): 315 mm - Max. main blade diameter (with scorer): 250 mm - Blade bore diameter: 30 mm - Max. cutting height with 250 mm blade: 40 mm - Spindle lock - Main blade adjustable up/down and at an angle - Blade guard - With carriage - Cutting width at the fence: 1250 mm - Main motor: 4 kW Hsdoxm Rm Sopfx Akbsl - Fence with latch: 1700 / 2600 mm - Scorer - Max. scorer blade diameter: 80 mm - Scorer spindle diameter: 20 mm - Scorer motor: 0.65 kW - Extraction port diameter: 100 mm - Shipping dimensions (L/W/H): 325 / 190 / 130 cm - Weight: 500 kg

Condition: excellent (used), Catalogue number 7945 TECHNICAL DETAILS - Number of spindles: 21 pcs - Distance between outermost spindles: 640 mm - Spindle pitch: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 890x380 mm - Height to table surface: 890 mm - Feed cylinder stroke (drilling depth adjustment): 70 mm - Drilling speed adjustable pneumatically - Drilling angle adjustable pneumatically - Main motor: 1.5 kW - Side fences and stop: 1500 mm - Compressed air requirement: 6-8 bar - Dimensions (L/W/H): 1000x1540x1340 mm – weight: 282 kg ADVANTAGES – Austrian-made – 21 spindles – quick-change drill chuck system – Drilling vertically, horizontally, and at an angle – unpainted – Used drilling machine in very good condition Net price: 11,900 PLN Net price: 2,830 EUR based on an exchange rate of 4.2 EUR (Prices may change with larger exchange rate fluctuations) Hodpfx Aoywth Nokbsl

Condition: excellent (used), Catalogue number 7963 TECHNICAL DATA Equipment: - disc - heating strip - guillotine - glue tank (granulate) - tape feeder - guillotine - 3 pressure rollers - finishing unit with saw blades - 2 milling units for edge profiling (radius cutters) - scrapers – for removing excess glue - 2 polishers - workpiece thickness 10-60mm - edge band thickness 0.4-5mm - pull-out support table - feed speed 9m/min - total power 5.5kW - extraction port diameter 120mm - dimensions (L/W/H) 3100/1080/1470mm - weight 670kg ADVANTAGES – DTR technical documentation – not repainted – Austrian manufacture – year of production: 2010 – perfect condition – used edgebander Net price: 17,900 PLN Net price: 4,260 EUR Hsdjyzy D Sopfx Akbsl Net price calculated at exchange rate 4.2 PLN/EUR (In the case of larger exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2023, For sale is a used Felder sliding table panel saw K740S with a cutting width of 1250 mm. The machine is in excellent condition and has been serviced and inspected by our technical staff. (Fully operational) Technical specifications: - Saw blade tiltable 90–45° - Max. saw blade diameter 400 mm / cutting height 140 mm - Sliding table length 3700 mm - Outrigger table with mitre fence 2600 mm - Manual height and tilt adjustment - Cutting width 1250 mm with parallel rip fence and fine adjustment - Overhead guard (can be swung away) - 10 HP (7.35 kW) motor Hodpjy Evxaefx Akbol - 425.04.424.23 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: saw, circular saw, panel saw, sliding table Reference: R-K09353

Condition: excellent (used), Year of construction: 2009, For sale is a FELDER wide belt sanding machine FS 722 with a sanding table size of 2200 x 800 mm. The machine is in very good condition and has been serviced and inspected by our specialized staff (fully functional). Technical data: - Sanding table size: 2200 x 800 mm - Height adjustment via hand crank - Offset machine frame - Sanding belt size: 5750 x 150 mm Hsdey Emy Iopfx Akbsl - Extraction connection: 160 mm - 4 HP (3 kW) motor, 400 volts - Machine can be disassembled! Shipping not possible! The machine is located in A-8561 Söding and can be inspected and picked up at any time during our opening hours. Subject to prior sale. Related terms: sander, wide belt, surface processing Reference: R-Z1314

Condition: excellent (used), Machine available from mid/end of June. Further information to follow. Hjdpfx Akoy Hl Nwjbjl

Condition: excellent (used), Machine available from mid/late June. Further information will follow. Hedpfsy Hl Imex Akbsl

Condition: used, Year of construction: 2020, max. workpiece length 3740 mm profile spindle 1 Stück main drive 15 kW Control CNC Felder Format4 Type Profit H500S 16.38 CNC Machining Center to be sold on behalf of our customer ----- - From a wood window manufacturing company. - Machine still connected and ready for demonstration - Without machining tools Technical description (summary, full text see PDF): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depending on clamping system, see layout. Travel: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speed: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional C-axis locking - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles (7 spindles in the X direction, 5 spindles in the Y direction, grooving saw in the X direction) Horizontal drilling unit with 6 spindles, 4 spindles in the X direction and 2 spindles in the Y direction. 1 groove saw in the X direction, max. diameter 120 mm - Tool changer with 24 tool positions on the right side of the machine stand max. workpiece diameter 240 mm max. tool height 370 mm - Tool changer for circular saw blade mounted on the boom/tool changer max. saw blade diameter 350 mm - Tool changer on the left side of the machine stand with 10 tool positions. Max. workpiece diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - 24-position tool changer mounted on the boom, moving in the X-direction Max. workpiece diameter 240 mm Max. tool height 370 mm - Moving pick-up area for chip deflector plate - 6 workpiece supports with s-motion position control - 2 machining areas for pendulum machining - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved machining - Includes all existing solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety device - "WoodFLash" software Lamello Clamex P Macro Notching Macro software - "Greenline package" for reduced energy consumption ----- Price of the above machine on Inquiry! ----- Hsdpfeyq Sztox Akbjl NOTE VIDEO: Not an original video. The video is from the machine manufacturer and shows a machine of this type. (Technical specifications according to the manufacturer - without guarantee!) All prices quoted are net, plus VAT.

Condition: like new (used), Year of construction: 2024, operating hours: 30 h, planing width: 504 mm, actuation type: electric, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, For sale is a high-quality thickness planer Felder D 951, year of manufacture 2024. The machine is in like-new condition and has seen very little use. It is ideal for professional woodworking and ambitious workshops. Technical Data: + Motor power: 5.5 kW + Voltage: 400 V (three-phase) + Planing width: approx. 510 mm + Passage height: up to approx. 260 mm + Cutting depth: up to approx. 8 mm + Infinitely variable feed + Number of knives: 4 (quick-change knives) + Digital height display for precise setting + Heavy-duty cast iron table for low-vibration operation + Extraction connection: 160 mm + Weight: approx. 650 kg Features & Special characteristics: - Robust industrial-grade design - Very quiet operation and precise planing results - Simple operation and fast adjustments - Safety shut-off and emergency stop - High-quality construction "Made in Austria" Condition: - Year: 2024 - Technically and visually almost as new - Ready for immediate use Price: Negotiable €6,500 net Hedpoy Hvb Rjfx Akbel Location: 39340 Haldensleben Inspection: Possible at any time by appointment If interested or if you have any questions, feel free to contact me!

Condition: used, Year of construction: 2005, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 104 mm, cutting width (max.): 1,250 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: electric, total length: 3,200 mm, Equipment: CE marking, documentation/manual, saw blade guard, – Austrian production – year of production: 2005 – X-Roll carriage guide system – Operation manual DTR and CE TECHNICAL SPECIFICATIONS: – Carriage length: 2800 mm – Cutting width (right side): 1250 mm – Main blade diameter: max. 315 mm – Scoring unit diameter: 100 mm Hsdpfey Awwljx Akbjl – Main motor: 4 kW – Scoring motor: 0.75 kW – Brake – X-Roll carriage guide system – Cutting height adjustment – Manual angle adjustment: 0° - 45° – Max. cutting height: 104 mm – Option for installing milling cutter, thickness: 6 - 20 mm – Max. diameter: 180 mm – Pawl – Moving guard – Dimensions (L/W/H): 300 / 195 / 170 cm – Weight: approx. 700 kg

Condition: used, Year of construction: 2007, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting width (max.): 1,250 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, – Year of production: 2007 – Austrian manufacture TECHNICAL SPECIFICATIONS: Hedsymz Ubepfx Akbel – Total power: 7.35 kW – Max. saw blade diameter: 450 mm – Min. saw blade diameter: 250 mm – Scoring blade diameter: 125 mm – Pro Gline carriage guides – Carriage length: 2,800 mm – Fence with two stops – Cutting width to the right: 1,250 mm – Three spindle speeds: 3,500 / 4,500 / 5,500 RPM – Main motor power: 5.5 kW – Electric height adjustment of cut – Electric angle adjustment of cut – Electric setting of cutting width on the right side – Automatic scoring unit advance – Extraction port diameters: 100 mm and 120 mm Transport dimensions: – Length: 290 cm – Width: 230 cm – Height: 180 cm – Weight: approx. 1,000 kg

Condition: excellent (used), Felder RL 200 extraction unit max. capacity: 4000 m3/h Hsdpsy Ia Auefx Akbel extraction nozzle: 200 mm Automatic cleaning motor: 4 kW very good condition

Condition: ready for operation (used), Year of construction: 2020, cutting length (max.): 5,300 mm, cutting depth: 80 mm, This Felder Format 4 Kappa V80 panel saw was manufactured in 2020. It features a powerful 5.5 kW motor, a saw blade diameter of 300 mm, and can handle cutting lengths up to 5300 mm and heights up to 2200 mm. Ideal for precise large-scale panel cutting. Contact us for more information about this machine. • Saw unit motor power: 5.5 kW • Saw blade diameter: 300 mm • Cutting depth: 80 mm • Cutting length: 5300 mm • Cutting height: 2200 mm Hodpfxox D D Sco Akbol • Maximum horizontal cut: 2080 mm

Condition: ready for operation (used), Year of construction: 2021, This Felder FORMAT 4 KAPPA 550 panel saw was manufactured in 2021. It features a sliding table saw with a saw blade diameter range of 250-550 mm, offering cutting heights of 202 mm at 90° and 140 mm at 45°. It supports three speeds: 3000, 4000, and 5000 rpm, and includes a cutting width of 1250 mm and length of 2800 mm. The machine also boasts e-motion control and a telescopic stop for crosscuts up to 3200 mm. Contact us for more information. • Saw blade diameter: 250–550 mm • Cutting height: 202 mm (90°), 140 mm (45°) • Blade speeds: 3000 / 4000 / 5000 rpm • Cutting width: 1250 mm • Cutting length (sliding table stroke): 2800 mm • Control: Kappa 550 e-motion • Cantilever table support surface: 1250 x 650 mm • Telescopic stop for crosscuts up to 3200 mm • Crosscut stop swiveling range: 90° to 45° Hjdpfx Aex D Exqskbsl • Rear table extension behind saw axis: 1200 mm • Rip fence: electronically positioned via ball screw, enclosed/dust-free in the table

Condition: ready for operation (used), Year of construction: 2019, This Felder FORMAT 4 Tempora60.06LX edgebander was manufactured in 2019. It features an x-motion PLUS control system, chain feed with a speed of 10 m/min, and a Teflon-coated gluing unit for EVA or PUR granulate. The machine supports edge thicknesses from 0.4 to 3 mm and includes a multifunctional milling unit. Consider the opportunity to buy this Felder FORMAT 4 Tempora60.06LX edgebander. Contact us for more information about this machine. • Control system: x-motion PLUS Hjdpfx Aksx D D R Sobel • Chain feed • Feed speed: 10 m/min • Drive motor: 0.75 kW (S6) – 1.1 kW (S6) • Minimum workpiece length: 140 mm • Minimum workpiece width: 70 mm • Note: Minimum width varies depending on workpiece length, height, and surface finish. • Turntable edge magazine (rolled edge material) • Turntable diameter: 750 mm • Edge thickness: 0.4 – 3 mm • Extendable frame • Workpiece support extendable up to 450 mm • Upper pressure bar • Manually adjustable workpiece height: 8 – 60 mm • Edge feed • For rolls and rigid material • Joining unit • Power: 2.2 kW (2 × 1.1 kW) • Diamond cutter Z2 • Speed: 12,000 rpm • Gluing unit • Teflon-coated for 1.5 kg EVA or PUR granulate • Ready after approx. 10 min heating time • Tool-free quick-change system • Pressure unit • Pneumatically controlled • 1 driven and 2 conical pressure rollers • Shear • For roll edge material thickness: 0.4 – 3 mm • Cutting unit • Two high-frequency motors, each 0.35 kW, 12,000 rpm • Pneumatically swiveling 0° – 10° • Multifunctional milling unit (x-motion PLUS) • Flush and radius milling • One HF motor top and bottom, each 0.75 kW, 12,000 rpm • Each with 4 interchangeable blades • Corner processing unit • For soft and postforming workpieces • Front edge processing • Edge thickness: 0.4 – 3.0 mm • Workpiece height: 10 – 60 mm • Radius scraper unit • 2-axis motor-driven, position-controlled • Pneumatic release function • Polishing unit • Top and bottom

Condition: new, Year of construction: 2025, For sale is a Felder K500 P panel saw with an 800 mm cutting width. This is a brand-new machine (originally packaged) with full warranty/guarantee. Technical data: - 2050 mm X-Roll sliding table - 1300 mm outrigger table with 2600 mm crosscut fence - Angle index system - 800 mm cutting width across the entire table width - Rip fence with fine adjustment - Extraction pipe holder for saw blade guard - Additional crosscut stop 1300 mm - 5.5 HP (4 kW) motor, 400 Volt - Machine No. 441.11.031.25 The machine is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: saw, circular saw, panel saw, format Reference: R-D1618 Hedpfxsyk T H De Akbsl

Condition: used, Year of construction: 2011, total height: 1,600 mm, total length: 3,250 mm, total width: 1,000 mm, Weight: 1.250 kg Price: On request - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Number of units [pcs]: 7 - └ 1st unit type: - - Tools available: Yes - └ 3rd unit type: - - Tools available: Yes - └ 4th unit type: - - Tools available: Yes - └ 5th unit type: - - Tools available: Yes - └ 6th unit type: - - Tools available: Yes - └ 7th unit type: Hsdpfeyu Thcex Akbjl - - Tools available: Yes - Voltage [V]: 400 - Current consumption [A]: 18.6 - Fuse [A]: 25 - Power [kW]: 7.2 - Transport dimensions: 3250mm x 1000mm x 1600mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels