Used Felder G 680 for sale (139)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Preliminary milling unit Edge banding glue station for granules Capability to glue edge banding from 8-60 mm Feed rate of 11 m per minute Control panel with temperature setting Preliminary trimming of edge banding from a roll Guillotine for trimming edge banding from a roll Pressing zone with three rollers Cutting wheels to trim excess edge banding on the edges Top/bottom milling unit with profiled milling cutters Ndsdpozx Szuofx Afueb Profiled sanding unit Flat sanding unit Corner milling unit Polishing unit Year of manufacture: 2013

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Felder Type: G680 Year of manufacture: 2017 Technical data Power supply: 400 V, 3-phase, 50 Hz Power: 7.22 kW Nsdpoz Arwqofx Afuodb Current consumption: 18.6 A CE marking: Yes Equipment: Jointing unit Gluing unit Pressure zone Cutting unit Milling unit Corner rounding unit Scraper blades Polishing unit Additional glue tank Dust extraction connections with flexible hoses Control panel with digital display Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2010, functionality: fully functional, – Very good condition – Year of manufacture: 2010 – Operating and maintenance documentation (DTR) available TECHNICAL PARAMETERS: – Edge thickness min. - max.: 0.4 – 3.0 mm – Workpiece thickness min. - max.: 10 – 45 mm – Saw trimming unit – Milling unit for trimming excess edge tape flush or with a profile – Designed to remove excess edge tape at the top and bottom edges of the panel – Flush milling – Milling of the edge tape at an angle or radius in a single work cycle – Edge overhang milling: Ø 70 mm, Z 6, a=15°, R=2 mm – INSPECTIONS CARRIED OUT BY FELDER SERVICE – COMPACT DIMENSIONS – PRECISE AND VERY EASY TO USE – Table dimensions: 2000 x 300 mm – Air supply requirement: 6 Bar – Power supply: 400 V – Power: 3.2 kW – Glue application roller and glue tank – Grooved glue application roller ensures uniform glue coverage on the edge of the workpiece – Feed speed: 9 m/min – Overall dimensions (L/W/H): 2000 x 1260 x 650 mm – Net weight: 360 kg Ndjdpfxjw H Rzxj Afueb

Condition: used, AD planer Hammer A3, year 2018, in very good condition, hardly used, 310mm planing width, incl. 1 set of spare knives (reversible knives), 3 kW, 3 knives, 300 kg Subject to price changes, errors, and misprints. Nsdpfx Aswzzfkofusdb

Condition: used, machine/vehicle number: G-ADHM118054aR, AD planer Hammer A3-41, year of manufacture 2019, very good condition, including reversible blade and chassis, 4 kW, 1800 mm table length, 410 mm table width, 3 blades, 350 kg Prices subject to change, errors, printing and typesetting errors reserved Nsdpfx Afjvw Ebpousdb

Condition: used, Felder K700 panel saw, year of manufacture 2006, good condition, 880 mm table width, 100 mm cutting height, 1300 mm panel table length, approx. 300 kg Prices subject to change, errors, printing and typesetting errors reserved Ndjdpevrvlusfx Afusb

Condition: used, AD planer Felder AD741, very good condition, year of manufacture 2003, 4 kW S6, 400 V, 410 mm table length, 2000 mm table width, 4 knives, approx. 400 kg Njdpfevrvkdjx Afujdb Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, machine/vehicle number: G-KF131799aH, Format circular saw milling machine Hammer B3 Winner, year of manufacture 2023, as new, standard equipment, 2x3 kW, 2000 mm table length, 500 kg Ndsdpfx Aevw Ectofujb Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, machine/vehicle number: G-KR114377bH, Felder K7 circular saw, very good condition, 3000 mm table length, 600 kg Prices subject to change, errors, printing and typesetting errors reserved Ndsdpfx Aovw Ecyefujb

Condition: used, Band saw Felder FB510, year of manufacture 2019, very good condition, standard equipment Ndodjvr I I Ijpfx Afueb Prices subject to change, errors, printing and typesetting errors reserved

Condition: used, functionality: fully functional, – Austrian manufacture – DTR (technical documentation) included – not repainted – compact design – occupies very little space TECHNICAL SPECIFICATIONS: – edge thickness: 0.4–2.0 mm – workpiece thickness: 10–50 mm – feed speed: 5.5 m/min – height to table surface: 880 mm – table dimensions: 1800 x 300 mm – workpiece support – total power: 2 kW – power supply: 400 V, 50 Hz – electronic glue temperature control: 20–250°C – compressed air pressure: 6 bar EQUIPMENT: Ndsdpfsw H Rrwox Afusb – feed plate – tape feeder – guillotine for pre-cutting – glue applicator – 3 pressure rollers – guillotine for front/rear tape cutting – 2 milling units: top/bottom – dimensions (L/W/H): 2050/930/1280 mm – weight: 290 kg

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit Nedsw I H Rkepfx Afujdb With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: reconditioned (used), Year of construction: 2010, Voltage 400V 3~ 50Hz 7.22kW Control panel with LCD display and keypad Jointing unit with 2 counter-rotating diamond cutters Corner rounding unit for edge faces Manual unit adjustment Edge thickness 0.4-5.0 mm (optionally 8 mm) Workpiece height 8-60mm Feed speed 11 m/min Ndsdpfjyf I T Usx Afujb 3 free slots for finishing units Edge feed for coil and strip material Scraper knife

Condition: good (used), Year of construction: 2016, machine/vehicle number: 0000087, functionality: fully functional, operating hours: 2,202 h, power: 8,000 kW (10,876.96 HP), input voltage: 400 V, input current: 18 A, input frequency: 50 Hz, type of input current: three-phase, workpiece height (max.): 60 mm, edge thickness (max.): 6 mm, feed rate X-axis: 11 m/min, actuation type: electric, total height: 1,550 mm, total length: 4,100 mm, total width: 780 mm, overall weight: 990 kg, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, Preliminary milling unit Edge banding glue station Capability to glue up to 60mm Feed rate 11m per min Control panel with temperature setting Trimming of edge banding from a roll Guillotine for trimming edge banding from a roll Top/bottom milling unit with profiled milling cutters Nodpfxjzzcc Ij Afuodb Polishing unit Year of manufacture 2016 Excellent condition

Condition: ready for operation (used), Year of construction: 2008, workpiece width (max.): 60 mm, total height: 1,550 mm, total width: 1,100 mm, overall weight: 750 kg, product length (max.): 3,200 mm, Edgebander manufactured in 2008. This FELDER G500 features an edge thickness capability of 0.4–5.0 mm, with an optional 8 mm. It accommodates workpiece thicknesses from 8 to 60 mm and offers a feed speed of 11 m/min. The machine includes automatic edge feeding, a Teflon-coated glue roller, and multiple finishing positions. If you are looking to get high-quality edging capabilities, consider the FELDER G500 edgebander we have for sale. Contact us for further details. Machine • FELDER G 500 Edgebanding Machine • Voltage: 400 V • Frequency: 50 Hz • Phase: 3N • Current: 14 A • Power: 5.5 kW • Edge Thickness: 0.4–5.0 mm (optional 8 mm) • Workpiece Thickness: 8–60 mm Nodpfozugwvsx Afujdb • Minimum Workpiece Width: 70 mm • Minimum Workpiece Length: 140 mm • Automatic Edge Feeding • Strip Magazine • Coil Diameter: Ø800 mm • Suitable Edge Materials: PVC, ABS, Solid Wood Veneer • Glue Pot Capacity: 2 kg • Glue System: EVA Hot-Melt Granulate • Teflon-Coated Glue Pot • Glue Pot Heating Time: Approx. 12 min • Automatic Glue Temperature Reduction • Pressure Unit with 1 Straight Pressure Roller and 2 Conical Pressure Rollers • End Trimming Unit • Flush & Radius Trimming Unit • Free Finishing Positions: 3 • Chain Conveyor Feed System • Feed Speed: 9 m/min • Extraction Connection: Ø120 mm • Machine Length: 3,200 mm • Machine Weight: 750 kg Additional Equipment • Scraper Unit (mechanically adjustable for R = 2 mm) • Buffing Unit • 2 Motors • 1,400 rpm • 900 W Technical Specification Feed Speed 11 m/min

Condition: ready for operation (used), Year of construction: 2012, machine/vehicle number: CA.03.013.12, operating hours: 1,555 h, Edge banding machine FELDER G400, used machine / condition as coming in from customer. Nsdpfx Asng H Uvofuodb Machine is functional tested and OK. Without service / warranty for this price. Free loaded into your truck/trailer. Directly available ex works Barneveld (NL)

Condition: good (used), Year of construction: 2017, functionality: fully functional, operating hours: 130 h, power: 6.5 kW (8.84 HP), input voltage: 400 V, input frequency: 50 Hz, Further technical data Edge thickness: 0.4–3 mm Workpiece height: 10–45 mm Chain feed with 8 m/min Total running length: 5,864 linear meters Jointing unit with max. 2 mm material removal Strip edgebander in single-feed operation Guillotine for hard PVC/ABS up to 3 mm thickness Teflon-coated glue pot, 1.2 kg capacity, with glue roller End trimming unit, 0.18 kW Extraction connections: 2x 80 mm, 1x 120 mm 2x HW saw blades, D-80 mm, Z16 Multi-milling unit with 12,000 rpm and 0.22 kW, 'Quickset' system for radius, flush and chamfer milling Control panel with LCD display and keypad Nedpfxoyfvhao Afujdb Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Rotary table for edge banding rolls Minimum workpiece width: 70 mm Minimum workpiece length: 210 mm Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Additional equipment: Surface scraper, mechanically engageable Radius scraper knife

Condition: used, Year of construction: 2020, max. workpiece length 3740 mm profile spindle 1 Stück main drive 15 kW Control CNC Felder Format4 Type Profit H500S 16.38 CNC Machining Center to be sold on behalf of our customer ----- - From a wood window manufacturing company. - Machine still connected and ready for demonstration - Without machining tools Technical description (summary, full text see PDF): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm clearance height (from console level), depending on clamping system, see layout. Travel: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speed: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional C-axis locking - Drilling head DH 18 6H1S: Vertical drilling unit with 12 spindles (7 spindles in the X direction, 5 spindles in the Y direction, grooving saw in the X direction) Horizontal drilling unit with 6 spindles, 4 spindles in the X direction and 2 spindles in the Y direction. 1 groove saw in the X direction, max. diameter 120 mm - Tool changer with 24 tool positions on the right side of the machine stand max. workpiece diameter 240 mm max. tool height 370 mm - Tool changer for circular saw blade mounted on the boom/tool changer max. saw blade diameter 350 mm - Tool changer on the left side of the machine stand with 10 tool positions. Max. workpiece diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - 24-position tool changer mounted on the boom, moving in the X-direction Max. workpiece diameter 240 mm Max. tool height 370 mm - Moving pick-up area for chip deflector plate - 6 workpiece supports with s-motion position control - 2 machining areas for pendulum machining - Vacuum pump 90 m³/h - Chip conveyor belt - Line laser for curved machining - Includes all existing solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety device - "WoodFLash" software Lamello Clamex P Macro Notching Macro software - "Greenline package" for reduced energy consumption ----- Price of the above machine on Inquiry! ----- Ndodpfx Aeyq Sztofueb NOTE VIDEO: Not an original video. The video is from the machine manufacturer and shows a machine of this type. Option: New Oppold tool set for H500. The customer reused the existing tooling—previously employed on this H500—for their new machine. A brand-new tool set, matching the programming already established on the machine, costs €50,000. -Windows Timber windows IV 68, 78, and 88 (inward-opening), with stepped rebate on sides and top. 20 mm glazing rebate; frame and sash profiles with 20° slope For loose and integral glazing beads Renovation-style timber windows IV 68, 78, and 88 (inward-opening), without rain rail, with stepped rebate on sides, top, and bottom. 20 mm glazing rebate; frame and sash profiles with 15° slope Attached drip rail Timber-aluminum windows (System provider: Gutmann Mira, sloped rebate system) HA IV 68, 78, and 88, inward-opening; 2 sash variants: square and sloped, Stepped rebate at bottom, sides, and top -Entrance doors Timber entrance doors (IV 68, 78, and 88) with single rebate in frame a...

Condition: good (used), Year of construction: 2002, functionality: fully functional, Roller diameter: 120 mm Roller width: 60 mm Motor: 0.7 kW Nodsz D Dg Rjpfx Afuodb 4 speeds: 4, 8, 11, 22 m/min. Direction of rotation can be switched: forward/reverse Complete with gantry support.

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Clearance height Operator terminal: 24" LED colour display Handheld terminal for axis speed control Software: "Woodflash Vacuum pump 90 m³/h/50 Hz or 108 m³/h/60 Hz Milling spindle 12 kW HSK F63 (12,000 rpm) 12-position linear tool changer on the left of the machine frame + pickup station Drilling head DH 16 4H 2S: Vertical 12 spindles Horizontal 4 spindles 2 grooving saws Storage location: Nattheim Ndodpjz A Aw Sjfx Afusb

Condition: used, Year of construction: 2018, max. cutting width: 5200 mm max. cutting height: 2200 mm saw blade diameter: 250 mm max. processing thickness: 60 mm saw blade arbor: 30 mm lower support: plastic material support: plastic strips, retracting measuring system: digital display Ndedpfxoz Aibgs Afujb swiveling saw head: manual saw feed: manual mounting: free-standing extraction: external locking of saw beam: manual weight approx.: 1200 kg motor power: 4.2 kW Location: Nattheim

Condition: used, Year of construction: 2017, Max. cutting width: 4200 mm; max. cutting height: 2200 mm; saw blade diameter: 250 mm; max. processing thickness: 60 mm; saw blade bore: 30 mm; bottom support: plastic supports; material support: retractable plastic strips; measuring system: scale; saw head tilting: manual; saw feed: manual; mounting: free-standing; extraction: external; locking of saw beam: manual; approx. weight: 1000 kg; dimensions: 5600 x 1700 x 3000 mm; motor power: 4.2 kW. Storage location: Nattheim Njdpfx Aoxg Igiofujdb

Condition: used, Year of construction: 2009, functionality: fully functional, working width: 950 mm, grinding width: 950 mm, - Austrian-made - Year of manufacture: 2009 - Combination pad (trzewik kombi) TECHNICAL PARAMETERS: - Sanding width: 950 mm - Sanding height: 4–170 mm Ndjdpfx Afjxlr U Ijuob - Main motor power: 11 kW - 1st unit: rubber drum with pneumatic engagement - Drum diameter: 110 mm - 2nd unit: combination pad (trzewik kombi) - Cleaning brush: 1.1 kW - Pneumatic engagement of rubber drum - Pad with pneumatic engagement - Pneumatic oscillation - Air blower on sanding belt - Electric height adjustment - Sanding belt speed controlled by inverter - Electronic positioning of sanding height - Two feed speeds: feed motor power 0.55 kW - Minimum workpiece length: 400 mm - Extraction port diameter: 3 x 130 mm and 2 x 80 mm - Machine dimensions (L/W/H): 170 x 150 x 210 cm - Weight: approx. 800 kg

Condition: used, Year of construction: 2007, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting width (max.): 1,250 mm, saw blade diameter: 450 mm, tilt adjustment saw blade: 45 °, height adjustment type: electric, – Year of production: 2007 – Austrian manufacture TECHNICAL SPECIFICATIONS: – Total power: 7.35 kW – Max. saw blade diameter: 450 mm – Min. saw blade diameter: 250 mm – Scoring blade diameter: 125 mm – Pro Gline carriage guides – Carriage length: 2,800 mm – Fence with two stops – Cutting width to the right: 1,250 mm – Three spindle speeds: 3,500 / 4,500 / 5,500 RPM – Main motor power: 5.5 kW – Electric height adjustment of cut – Electric angle adjustment of cut – Electric setting of cutting width on the right side – Automatic scoring unit advance – Extraction port diameters: 100 mm and 120 mm Transport dimensions: Ndodpeymz Ubsfx Afujb – Length: 290 cm – Width: 230 cm – Height: 180 cm – Weight: approx. 1,000 kg

Condition: as good as new (ex-display), Code: N0506 Brand: FELDER - AUSTRIA Model: K 700 S – CE Standard Precision panel saw with tilting blade and scoring unit - CE Standard Technical data: Tilting guide system “Easy-Glide” “Power-Drive” for automatic adjustment of blade height and tilt Carriage length 3200 mm Ndsdpfxjzqd Hte Afueb Blade inclination 90/45° Cutting width 1250 mm Max blade diameter315 mm Bore 30 Rpm 4800 Max cutting height at 90°104 mm Max cutting height at 45° 72,7 mm Adjustable scoring unit - blade diameter 120 mm – Bore 20 rpm 8600 Main blade motor 7,5 Hp Tilting guide on fence 0,45° Support roller on fence Dust extraction connection diameter 120 mm Upper blade dust extraction diameter 50 mm Overall dimensions of assembled machine mm 3400 x 3400 x 1050 h Weight kg 740