Used Felder F 700 for sale (147)

Condition: like new (used), Year of construction: 2023, functionality: fully functional, For sale is a Felder F-700 Z milling machine with 4 spindle speeds. The machine is used as a showroom model at our facility and can be considered as new, with full warranty/guarantee. Technical specifications: - 4 milling speeds - Milling spindle tiltable 90° - 45° - Milling fence for tools up to Ø 230 mm - Multi-adjustment system - Tenoning and slotting table - Motor power 5.5 kW / 7.5 HP, SD start - Year of manufacture: 2023 / as new The machine is located at A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel.: 03137-3109 Knsdowp Ri Uspfx Aafjb Related terms: milling cutter, milling machine, milling Reference: R-D1618

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, For sale is a Felder F 700 table router in high-quality industrial design, including a Felder F38 3-roller feed system. The machine impresses with its robust construction, powerful drive, and precise adjustment options, making it ideal for professional use in carpentry and joinery workshops. Technical data: Manufacturer: Felder Type: F 700 Year of manufacture: 2012 Motor power: 7.35 kW Voltage: 400 volts Frequency: 50 Hz 3-phase design Router spindle adjustable by 45° Electronic height adjustment with digital display (mm/inch) Speed levels: 3,500 / 6,500 / 8,000 / 10,000 rpm Made in Austria Knodpszm Rziefx Aafsb Equipment: Felder 3-roller feed system F 38 Swivel and height-adjustable feed system Sliding table Table extension Solid aluminum router fence Precise router fence adjustment Large cast iron table Digital display for router height Swivel indicator for the router spindle Emergency stop switch Professional industrial design The machine is in good used condition and shows only the usual signs of wear and tear due to age and use. It is ideally suited for daily professional use. An inspection and test run are possible at any time by appointment. Transportation is possible for an additional charge! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale and changes are subject to change. All information without guarantee.

Condition: excellent (used), Felder F 700 Z Spindle Moulder 205 cm sliding table integrated in the worktop, Spindle adjustable in height and tiltable 0-45 degrees, Interchangeable 30 mm spindle, Knjdpfx Aeyn Iu Reafob 7.3 kW motor, electric brake, Forward and reverse rotation, 4 spindle speeds, Very good condition, fully ready for operation.

Condition: used, Year of construction: 2020, Sled length: 3200 mm Cutting width at the rip fence: 1250 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 120 mm Scoring saw: yes Saw blade height adjustment: handwheel Saw blade swivel adjustment: handwheel Rip fence adjustment: manual Crosscut fence adjustment: manual Saw blade angle indicator: scale Knjdpfx Aaozq Dcuofsb Cutting height indicator: - Rip fence indicator: scale Crosscut fence indicator: scale Saw blade diameter: 400 mm Speeds: 3 Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2200 mm Weight: 800 kg

Condition: good (used), Year of construction: 2017, - Milling spindle swivel range: 90 degrees / 45 degrees Kjdpfx Aaoy Tm Rpefenb - Spare milling spindle: included

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 423.03.394.09, cutting height (max.): 104 mm, saw blade diameter: 315 mm, total width: 1,160 mm, total length: 1,470 mm, total height: 1,200 mm, overall weight: 570 kg, table length: 1,300 mm, spindle speed (max.): 16,000 rpm, spindle speed (min.): 1,500 rpm, input voltage: 400 V, For sale: a Felder KF 700, almost unused. Saw-milling combination, year of manufacture 2009. Milling head can be swivelled 90°-45° Quick-change system for milling spindle Milling fence '240' Milling table opening: 230 mm Saw can be swivelled: 90°-45° Aluminum sliding table X-Roll with precision guides Cutting width: 800-1250 mm Cutting height: 104 mm with a saw blade diameter of 315 mm Cutting length: 1300 - 2500 mm Includes quick-change system for milling spindle and an additional spindle. Knodpfx Aaezxpahefob Additional table extension and saw blades are also included. The machine can be inspected and tested at our location in Chemnitz.

Condition: good (used), Year of construction: 2001, For sale is a Felder KF-700 SP circular saw/milling machine with a cutting length of 3200 mm. The machine has been inspected and refurbished by our service team and is in good condition. Technical data: - Cutting length 3200 mm - Cutting width 850 mm - Cutting height 103 mm - Max. saw blade diameter 315 mm - 4 milling speeds - Direction of rotation switch - 3 motors, each with 3 kW / 4.1 hp - Year of manufacture 2001 Knodpfx Aezichysafsb The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: circular saw, milling machine, combined machine Reference: R-B17MP

Condition: excellent (used), Year of construction: 2023, DEMONSTRATION MACHINE! For sale is a used Felder KF 700 SP sliding table saw & spindle moulder with a cutting width of 800 mm. The machine is in excellent condition and has been refurbished and inspected by our professional staff. (Fully functional) Technical data: - Tilting circular saw and spindle moulder 90-45° - Sliding table 2500 mm - Extension table with mitre fence 2600 mm - Rip fence with fine adjustment - Cutting width 800 mm - Spindle fence with multi-adjustment system - 4 spindle speeds - 3 motors, each 7.5 HP (5.5 kW) - Automatic star-delta start The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Knjdpfjy Hgxmox Aafjb Related terms: saw, circular saw, spindle moulder, combination machine, combi machine, milling machine Reference: R-D1618

Condition: good (used), Year of construction: 2002, functionality: fully functional, Roller diameter: 120 mm Roller width: 60 mm Motor: 0.7 kW 4 speeds: 4, 8, 11, 22 m/min. Direction of rotation can be switched: forward/reverse Complete with gantry support. Kjdez D Dg Repfx Aafsnb

Condition: used, Year of construction: 2021, functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 8 A, input frequency: 50 Hz, actuation type: manual, Felder table router F 500 M, acquired on March 25, 2021, for profiling, rabbeting, grooving, and edge processing of wood pieces. A classic stationary router for professional woodworking shops. Key technical data: - Machine type: Table router / Spindle router Kjdpfxsztxt Hs Aafenb - Model: Felder F 500 M - Spindle diameter: Ø 30 mm - Usable spindle height: approx. 100 mm above the table - Table opening: approx. 180 mm - Spindle speeds: 3000 / 6000 / 8000 / 10,000 rpm - Max. tool diameter at the router fence: approx. 220 mm - Motor power: 4.0 kW - Working height: approx. 916 mm - Weight: approx. 300–320 kg depending on the version - Dust extraction port: approx. 120 mm at the router fence No warranty.

Condition: used, Year of construction: 2016, Working area: X=3300 mm Y=1280 mm Z=150 mm Clearance height Operator terminal: 24" LED colour display Handheld terminal for axis speed control Software: "Woodflash Vacuum pump 90 m³/h/50 Hz or 108 m³/h/60 Hz Milling spindle 12 kW HSK F63 (12,000 rpm) 12-position linear tool changer on the left of the machine frame + pickup station Drilling head DH 16 4H 2S: Vertical 12 spindles Horizontal 4 spindles 2 grooving saws Storage location: Nattheim Knodpfx Aasz A Aw Ssfob

Condition: like new (used), Year of construction: 2025, functionality: fully functional, For sale is a used Felder F-900 Z milling machine with a tenon and groove table length of 1300 mm. The machine is used as an exhibit in our showroom and is therefore in like-new condition. Technical data: - 5 milling speeds - Milling spindle can be swiveled 90° - 45° - Milling fence for tools up to Ø 230 mm - Multi-adjustment system Ksdpfxow Hfd Io Aafenb - Tenon and groove table 1300 mm - Electrically adjustable in height + swiveling "PowerDrive" - Motor power 7.3 kW / 9.9 HP SD start - Year of manufacture 2025 The machine is located in A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: milling machine, milling Reference: R-D1618

Condition: used, Year of construction: 2013, machine/vehicle number: 320.002.13, functionality: fully functional, operating hours: 3,600 h, power: 12 kW (16.32 HP), input voltage: 400 V, input current: 52 A, input frequency: 50 Hz, type of input current: AC, workpiece length (max.): 4,300 mm, workpiece width (max.): 2,150 mm, workpiece height (max.): 100 mm, number of axes: 4, number of slots in tool magazine: 18, controller manufacturer: Felder, year of last overhaul: 2025, Equipment: CE marking, CNC machining center Profit H10 22.43 Kedszwt Ndepfx Aafenb Year of manufacture: 2013 Operating hours: approx. 3600 h System: Matrix table made of phenolic resin Slotted table with two rows of stops Automatic central lubrication HARDWARE: Control computer Mobile control panel Handheld terminal for remote control of the axes Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine frame: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24000 rpm Extraction: Central extraction via combined connections (D=250 mm) Software: Woodflash German (H20/H08/H10/H50) Travel range of the axes H10 22.43 X = 5230 mm Y = 2560 mm Z = 280 mm Working area: X = 4300 mm Y = 2160 mm Z = 105 mm Axis positioning speed: X = 100 m/min Y = 100 m/min Z = 30 m/min The machine will be in operation until calendar week 38 of 2026, after which it will be dismantled. In addition, 2 swivel heads for 5-axis machining can be purchased. These are not included in the quoted price and will be priced separately. The price applies ex works, including loading. Transport can be arranged and ordered separately. Assembly and installation assistance can also be offered as an option.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total width: 1,962 mm, total height: 1,992 mm, total length: 1,450 mm, working width: 1,100 mm, grinding width: 1,100 mm, overall weight: 1,150 kg, grinding height: 170 mm, power: 15 kW (20.39 HP), height adjustment type: electric, grinding belt length: 1,900 mm, grinding belt width: 1,120 mm, table length: 1,962 mm, table width: 1,100 mm, power of feed motor: 750 W, air demand: 3,620 m³/h, input voltage: 400 V, operating pressure: 8 bar, > Digital grit adjustment and sanding pad control directly on the control panel Kjdozm Nifjpfx Aafenb > Sanding width 1100 mm > Contact roller and sanding pad unit > Scotch-Brite brushes at the machine outlet > Two-sided roller table extension, 200 mm > Clearance height can be adjusted to an accuracy of 0.1 mm on the control panel > Stepless feed rate, 0.1-10 m/min

Condition: excellent (used), Year of construction: 2021, For sale is a high-quality Format4 Profil 45 M from Felder. This machine was manufactured in 2021 and is in excellent condition. The Profil 45 M is a heavy-duty, precision swivel spindle table saw designed for professional use. The electric adjustment of the milling spindle and the fence allows for comfortable, quick, and very precise operation. Features and technical data: +Manufacturer: Format4 / Felder +Type: Profil 45 M +Year of manufacture: 2021 +Condition: very good +Robust and low-vibration industrial design +Stable cast iron milling table +Electric height adjustment of the milling spindle +Electric milling spindle swivel from -5° to 45° +Digital display for spindle height and swivel angle +Milling spindle quick-change system +Milling spindle diameter: 30 mm +Usable spindle height above the table: 140 mm +Milling spindle lock from the outside +Five speeds: 3,500 / 4,500 / 6,000 / 8,000 / 10,000 rpm +Right and left rotation +Large milling table opening: 320 mm +Milling fence for tools up to a maximum diameter of 250 mm +Electromotive MULTI adjustment system for the milling fence +Digital display of the fence position +Anodized aluminum fence scales +Working height: approx. 890 mm +Dust extraction connections on the milling fence and under the table +Weight depending on equipment: approx. 730 kg +Operating voltage: 400 V Comfortable and precise operation: The height and angle of the milling spindle are conveniently adjusted electrically and read off precisely via digital displays. The milling fence can also be adjusted electromotively. This allows for quick, precise, and reproducible adjustments. The milling spindle quick-change system enables rapid tool or spindle changes and significantly reduces setup times. The milling fence can be conveniently folded away for tool changes. Thanks to the large table opening, even larger milling tools can be safely used below the table. The rear-swiveling milling spindle ensures comfortable workpiece guidance, good chip removal, and allows for the trouble-free use of a feed device even when swivel milling. An extremely stable and user-friendly table saw for demanding milling operations, individual pieces, and professional series production. -Inspection and a test run are possible after prior arrangement. Knjdpfx Ajzz Nm Teafeb -Loading on-site is no problem. -You will receive an invoice with VAT shown. -Price: €10,500 net

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, operating hours: 80 h, power: 18.5 kW (25.15 HP), input voltage: 400 V, input current: 27 A, input frequency: 50 Hz, type of input current: AC, travel distance X-axis: 4,490 mm, travel distance Y-axis: 1,930 mm, travel distance Z-axis: 225 mm, workpiece length (max.): 3,090 mm, workpiece width (max.): 1,530 mm, workpiece height (max.): 85 mm, number of axes: 3, total length: 5,550 mm, total width: 3,850 mm, overall weight: 2,460 kg, table length: 3,090 mm, table width: 2,100 mm, Equipment: CE marking, documentation/manual, For sale is a nearly unused Felder Format4 CNC profit H08 16.38 F4I CNC woodworking machine. The machine was manufactured in 2023. The package includes the machine, a Felder RL 250 dust extraction filter, and a scissor lift table. The machine was purchased and was unused. Knedpezy Hdaefx Aafsb

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale is a Format4 c-express 920 classic CNC drilling and dowel processing center from Felder. This machine is ideally suited for efficient processing of carcass and furniture components. It enables precise drilling, milling, and dowel processing and is particularly designed for carpentry shops, joineries, and furniture manufacturing. Thanks to its compact design and powerful CNC control, the processing center is ideal for economical single-piece and series production. The machine is in a well-maintained, used condition and can be inspected and tested under power by appointment. Technical data: Manufacturer: Format4 (Felder Group) Type: c-express 920 classic with additional front and rear support roller tables Operating hours: approx. 800 Year of manufacture: 2016 LxWxH: 2100x1605x1950mm Weight: 850kg Motor power drilling head: 1.5kW Drilling head speed: 3600 rpm Circular saw unit speed: 9000 rpm Horizontal spindles (max.): 2+2, 1+1 Vertical spindle (max.): 9 Distance between horizontal spindles: 32mm Distance between vertical spindles: 32mm Diameter horizontal spindles max.: 15mm Diameter vertical spindles max.: 8 x 15 mm, 1 x 35 mm Diameter circular saw blade max.: 100mm Max. drilling depth: Horizontal 30mm, Vertical 55mm Voltage: 400 V 3 phases Frequency: 50 Hz Connected load: 7.0 kW Operating mode: S6 40 % CNC-controlled processing center Kedpfxezrwmio Aafonb Automatic workpiece feed Operating PC with screen, keyboard, and mouse Foot switch Dust extraction connection Drilling and dowel processing Workpiece support table with rollers Safety enclosure Application areas: Furniture manufacturing Carcass production Dowel processing Drilling patterns Row drilling Hardware drilling Interior construction Carpentry Joinery The machine can be inspected and tested under power by appointment. Transport is possible for an extra charge! The machine will be inspected before sale. Technical data and equipment may vary. Errors, prior sale, and changes are subject to change. All information without guarantee.

Condition: excellent (used), Year of construction: 2011, working width 950mm 1 kombi unit pneumatic segmented pad two feeding speed electric table regulation pneumatic oscillation motor power 11kW year of production 2011 Knjdpfxozxyrzs Aafsb

Condition: used, Year of construction: 2020, includes accessories Working width 950 mm Knedpfx Aszn N Iqeafsb 4-position tool changer, side-mounted Location: Nattheim

Condition: like new (used), Year of construction: 2023, For sale is a demonstration Felder FB-710 bandsaw with a cutting width of 690 mm. The machine was only briefly used at our premises for demonstration purposes. It is therefore considered as new and is offered with full warranty / guarantee. Ksdpfxoww Hhve Aafonb Technical specifications: - Table size: 840 x 700 mm - Cutting height: 460 mm - Cutting width: 690 mm - Table tilt: -5° to +45° - Saw blade length: 5120 mm - Weight: approx. 400 kg - Motor power: 7.5 HP - Exhibition machine - Year of manufacture: 2023 The bandsaw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: bandsaw, saws, saw, band Reference: R-A0117-67

Condition: used, Year of construction: 2021, Short description for sale: Felder Format4 Profit H200 CNC wood milling machine, purchased on May 14, 2021, including a vacuum clamping table. Professional CNC machine for the precise machining of larger wood and panel workpieces, suitable for demanding workshop and production applications. Key technical data: - Machine type: CNC machining center / CNC wood milling machine - Model: Format4 Profit H200 R 13.33 - Working area X: approx. 3300 mm - Working area Y: approx. 1280 mm - Working area Z: approx. 250 mm - Main spindle: approx. 13.2 kW - Max. speed: up to approx. 24,000 rpm - Tool holder: HSK-F63 - Tool changer: 24 - Vacuum system: including vacuum clamping table / vacuum clamping - A very attractive main asset for carpentry shops, interior design, prototyping and small-series production - Suitable for milling, drilling, grooving, contouring and panel processing Kedpfx Ajzupcbjafonb - Vacuum clamping table as an important selling point for efficient clamping of panel materials No warranty.

Condition: excellent (used), Year of construction: 1999, operating hours: 650 h, functionality: fully functional, power: 4 kW (5.44 HP), Well-maintained, lightly used, powerful professional machine with 5 combined functions. Numerous accessories included. Features a circular saw and table router with sliding table, jointer and thickness planer, as well as a mortise drilling unit. 360 V The machine is available for sale immediately. It is located in a ground-level basement in 23858 Reinfeld. Transportation is the responsibility of the buyer. Knodpfx Aajzn I Aajfjb

Condition: used, Year of construction: 2021, functionality: fully functional, power: 10 kW (13.60 HP), input voltage: 400 V, input current: 11 A, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, saw blade guard, scorer, Format panel saw / table saw Format4 Kappa 550 by Felder, purchased on May 26, 2021, for precise longitudinal, cross, and miter cuts in wood and panel materials. Professional saw for carpentry, interior design, and workshop use. Key technical data: - Machine type: Format panel saw / table saw - Saw blade diameter: 250–550 mm - Max. cutting height: approx. 202 mm at 90° / approx. 140 mm at 45° - Swivel range of the saw unit: 0°–46° - Cutting width: depending on the model, approx. 1000 / 1250 / 1600 mm - Cutting length: depending on the model, approx. 2200–3700 mm - Speeds: 3000 / 4000 / 5000 rpm, optionally infinitely variable 2000–6000 rpm Kjdpfx Aszuywijafenb - Motor power: approx. 10 KW - Precise format table for repeatable, accurate cuts - Suitable for solid wood, panel materials, and precise furniture / interior design work - Core machine for professional woodworking shops, carpentry workshops, training workshops, and makerspaces No warranty.

Condition: used, Year of construction: 2015, We are selling a Felder Perfect 710, complete with two additional cauldrons. Everything is in working order and ready for immediate use. Knodpfx Aaezc Ikhsfsb Included: Felder Perfect 710 2 additional cauldrons Please contact me for viewing, further information, or pictures.

Condition: used, Year of construction: 2021, power: 4.9 kW (6.66 HP), cutting height (max.): 2,200 mm, cutting width (max.): 5,300 mm, saw blade diameter: 250 mm, actuation type: manual, rotational speed (max.): 5,300 rpm, Equipment: CE marking, saw blade guard, Format4 Kappa V60 vertical panel saw by Felder, purchased on May 26, 2021, for precise cutting of panel materials in the woodworking shop. Suitable for large-format wood, wood-based materials, and coated panels with minimal space requirements. Key technical data: - Cutting depth: Maximum 60 mm Knsdpfx Aozulpqeafsb - Cutting height: 2200 mm vertically - Cutting length: 5300 mm - Motor power: approx. 4.9 kW - Saw blade: Ø 250 mm at 5300 rpm - Dust extraction: 2x 100 mm connections - Weight: approx. 910 kg, depending on the model - Vertical design for space-saving cutting of large panels - Precise horizontal and vertical cuts for panel materials - Particularly interesting for carpentry shops, makerspaces, training workshops, and companies with regular panel cutting needs No warranty