Top Sanders

HOMAG SANDTEQ W-700

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Working height: 900 mm Working width: 1,350 mm Belt changing side: left Workpiece thickness: 3 - 160 mm Frequency-controlled feed speed: 4 - 20 m/min Abrasive belt dimensions: 2,620 x 1,350–1,380 mm Adjustable sanding belt blowing device with 5 settings WRD WORKPIECE CLEANING ROTOR Workpiece cleaning system with 16 rotating nozzles MOBILE OPERATING TERMINAL powerControl with powerTouch SST SOFT STARTER Inrush currents are limited to prevent voltage drops GWRD BELT CLEANING PROGRAM Upon activation, the machine automatically sets to a 10 mm workpiece thickness and activates the blowing rotors. After the feed belt is fully cleaned, the machine returns to its initial setting. AAT EXTRACTION DAMPER CONTROL Control of extraction dampers via the terminal (24 Volt DC, without extraction dampers included) UPS EMERGENCY POWER SUPPLY FOR BELT CONTROL 1-3 PCS Uninterruptible power supply for sanding belt oscillation in case of power failure Nlsdpfoyw Ndmjx Akcsa System consists of: SANDTEQ W-700, PROFI SWB735/RRE – sanding from below Wide belt sanding machine with three sanding units for processing wood or wood-like workpiece surfaces Prepared to accept up to two auxiliary units, such as a cleaning brush, satinizing or structuring brush, and rotating cleaning nozzles. Units: I. R UNIT Sanding unit with automatically adjusting contact roller Profiled steel roller, 240 mm diameter With grain compensation Drive motor: 37 kW Abrasive belt speed: 25 m/s - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation II. R UNIT Sanding unit with automatically adjusting contact roller Rubber-coated roller, 240 mm diameter Rubber hardness: 85° Shore With grain compensation Drive motor: 30 kW Abrasive belt speed: 18 m/s III. E UNIT Sanding unit for installing a pressure beam - Automatic locking of the sanding unit for fast belt changes and increased process safety - Abrasive belt drives with electronic, wear-free brake - Optical, touchless abrasive belt tracking - Pneumatic abrasive belt tensioning with integrated belt edge compensation - Protected storage area on the machine for additional sanding inserts Drive motor: 22 kW Abrasive belt speed: 2 – 18 m/s Torque-dependent standby operation to reduce energy consumption. ACP PNEUMATICALLY SUPPORTED PRESSURE BEAM - Adjustable sanding pressure via pressure regulator - Workpiece-controlled engagement and disengagement at the leading and trailing edges - Various sanding inserts, 80 mm wide, with different felt hardnesses Machine dimensions (L x W x H): 3,900 x 2,100 x 2,000 mm Machine weight: approx. 7,500 kg SANDTEQ B-700, PROFI SWT735/RRE – sanding from above Wide belt sander with three sanding units for machining wood or wood-based workpiece surfaces Units as above, additionally: FBM FINISHING BRUSH Brush unit with finishing brush Bristles: horsehair Diameter: 130 mm Drive motor: 0.75 kW Machine dimensions (L x W x H): 2,995 x 2,100 x 2,255 – 2,415 mm Machine weight: approx. 6,500 kg

Condition: like new (used), Year of construction: 2012, Profiling parquet machine for longitudinal side Nljdpfx Aksxwnhbecoa 5+5 motors Speed up to 60 m/min Min. Working width 70 mm (65 mm without bevel) Diamond tools for T&G profile +infeed belt conveyor

Condition: used, machine/vehicle number: 008027, Max. machining width: 1350 mm Nedpfowvq E Ajx Akcjla Min. machining thickness: 200 mm Working Table: Fixed pass height Vacuum feed belt: yes No. Operating units: 4 Nr

Condition: new, Year of construction: 2026, Efficient, quiet, and powerful mechanical machine Technical specifications: Working length: 4040 mm Nledpex Hyhbefx Akcja Total length: 5352 mm Depth: 2232 mm Working height: 950 mm Total height: 1924 mm Weight: 5,000 kg Maximum bending thicknesses: Steel: 1.5 mm Aluminum: 2.00 mm Stainless steel: 1.00 mm Copper: 2.00 mm Galvanized sheet: 3.00 mm Standard equipment: • 1 bending rail, 20° with sharp nose, radius 1 mm, offset, 66/24 mm for the clamping beam • 1 insertable rail, 10/100 mm and 24/100 mm for the bending beam • Foot switch (MAF 400/CNC model delivered with a second foot switch) • Soft start for the bending beam • Electrically driven back gauge, 8-1000 mm • 5 m power cable with 32 A mains plug (EU version) • Supply voltage: 3 x 400 V, 50 Hz (EU version) CNC S-Touch control: From profile concept to bending precision in record time Standard features at no extra charge: • Graphical display of the bending sequence for the selected program • Graphical representation of sheet position before every bend • Operator guidance – each work step visually explained via the graphic control system • Programming without submenus • Profile correction by direct touch in the desired section of the profile • Programmable angle correction • Set repeat cycles for special radius arcs • Cutting program for RSL rotary shears • Easy mode for: single bends, back gauge, bending angle, lifting height, closing edges • Profile search possible by name, sketch selection, and profile drawing on the touchscreen • 21.5-inch LCD touchscreen with best-in-class graphics • USB port for program backup and transfer • Non-volatile memory for over 3,000 programs • Freely assignable program names (profile names) • Registration of produced quantities and machine operating time • 16 languages • Remote support (Team Viewer) • Soft start for bending beam • Back gauge with drive, 6-1000 mm • Foot switch For EU market: • 16 A plug with 5 m power cable • For MAF and MAZ models, 32 A plug with 5 m power cable

Condition: excellent (used), Year of construction: 2006, Technical data: - working width 1350mm - pneumatic oscillation - vacuum table - Stand alone machine ( Table raise/fall ) Nledpfx Aovdtxiskcsa 1 Combi unit: - motor power 18,5kW - steel calibrating roller - stepless adjustment of the belt speed - sectional pad (52 sections of 26mm each) 2 Combi unit: - sectional pad (52 sections of 26mm each) - motor power 7,5kW - stepless adjustment of band speed - brush on the exit of the material - stepless regulation of feed speed - pneumatic cleaning of belts

Condition: new, Year of construction: 2025, Showroom machine Year of manufacture: 2025 Features and technical specifications: - Base machine DYNESTIC 7507 10.57 push - Upgrade from BetterNest rectangular nesting to: CAMPUS BetterNest freeform nesting software - Uninterruptible Power Supply - UPS (ZB27) Njdpjxc Rmkjfx Akcsla - Touchtool tool length measurement - 10.3 kW router spindle - Drilling unit with 14 spindles - 1 additional machining field (Field A) at the rear with 1 stop, height 70 mm, pneumatically retractable - 2 electronically monitored side stops at the front, Field A + D, in X-direction for the front stop row (BF8) - 10-position tool changer 7873 - Tool changer 7872, one-position aggregate magazine, pivotable in X and Y direction for Clamex aggregate - 2 x 140 m³/h and 1 x 250 m³/h dry-running vacuum pumps, 400 V - 16-circuit vacuum system (VF16) - software controlled, incl. additional 25 meters sealing cord - Laser pointer - red (one laser pointer) Field D (ZB8) for positioning of vacuum suction cups or tracing the workpiece contour - Automatic central lubrication - Vacuum suction cups for smooth table surfaces, complete, 140x115 mm, height 30 mm with connecting hose - Thin sheet ejector as an addition to the ejector for special materials below 4 mm material thickness and standard wood-based materials under 2 mm - Complete conveyor belt, pusher conveyor belt, pusher table - TouchLabel PRO - touchscreen and label printer mounted on stand - Production control computer NEXTEC 4.0 - Extraction funnel at the end of the pusher conveyor belt - Availability: by arrangement - Location: Flörsheim

Condition: used, machine/vehicle number: 008323, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, PUR Premilling Unit: yes Corner Rounding Unit: yes Nledpfx Ajx Hpkxokcsa Max feed speed: 20 m/min Maximum panel thickness: 60 mm Operating Units: 7 nr

Condition: new, Year of construction: 2025, functionality: fully functional, power: 9 kW (12.24 HP), cutting height (max.): 82 mm, saw blade diameter: 315 mm, rotational speed (max.): 4,400 rpm, total length: 3,300 mm, total width: 3,350 mm, overall weight: 3,000 kg, cutting length (max.): 3,300 mm, feed rate X-axis: 100 m/min, feed rate Z-axis: 150 m/min, saw blade speed: 4,400 rpm, saw drive: 9,000 W, Equipment: rotational speed infinitely variable, SCHEER PA 4500 – 3300 x 3350 S7WIN10 Year of manufacture: 2025 | Condition: NEW | Control: PA-WIN10 + SIMATIC S7 | Powerful panel dividing system for highest precision & efficiency The SCHEER PA 4500 is a robust, industrially proven panel dividing saw for the precise processing of coated and uncoated wood-based panels. It was designed for demanding applications and already meets all the requirements of modern cutting operations in its basic configuration. Nodpfx Akowrpcxecola Main technical data: Cutting length (max.): 3300 mm Cutting height (stepless): up to 82 mm Main saw blade: Ø 315 mm | 60 teeth | cutting width 3.2 mm Scoring saw blade: Ø 200 mm | conical | cutting width 3.2–4.0 mm Saw motor: 9.0 kW Scoring motor: 1.1 kW Saw carriage drive: 2.32 kW Main saw blade speed: approx. 4400 rpm Saw carriage feed: 0–100 m/min (stepless adjustable) Saw carriage return: 150 m/min (lowered) Electrical connection: 400V / 50Hz / 3Ph Pneumatics: 6 bar, 15 NL/stroke Extraction: 3 x 140 mm | Capacity: 3300 m³/h at 20 m/s Working height: approx. 930 mm Angle stop: left Machine concept & highlights: Heavy cast honeycomb construction for vibration damping Absolute value encoder for highest positioning accuracy (no referencing) Distance- and time-optimized saw carriage operation Automatic oil mist lubrication & blowing of the guides Program-controlled saw blade adjustment (height & scoring side) ProLock quick-release system for the saw blade “wood dust tested” – emission only 0.65 mg/m³ System equipment: 1x angle pressing device WP 8500-1400 Adjustment range: 0–2200 mm Pressing force: approx. 480 N Cycle-controlled retraction function for panel transport 1x material feed table HP 5130 – 33 x 33 Mounted at the back with hardened guides & racks Roller conveyor system for easy panel transport 6 clamping fingers (spacing: 70 / 262 / 454 / 838 / 1173 / 2630 mm) Servo drive with ±0.1 mm accuracy 1x angle stop table HP 5137-1-1465 1x workpiece support table HP 5135-1-1465 Pertinax coating, each 1465 x 800 mm 1x air cushion unit LK 5169 central radial fan, pressure max. 2800 N/m² 1x control cabinet dustproof, separately mounted, vibration protected 19" TFT flat screen, keyboard, trackball Control & software: SIMATIC WinLC RTX soft PLC with S7 functionality PA-WIN10 operating interface on Windows 10 Professional (64 bit) (update to the latest Windows version possible at any time) True-to-scale real-time simulation and graphical cutting plan editor Integrated interfaces (label printing, panel warehouse management, etc.) Network-capable, future-proof, modularly expandable Operating modes & operation: Manual operation: single, chain dimension, trimming, residual cutting Automatic operation: cutting plan processing, online order processing Editor: parts list-based planning & optimization Maintenance & diagnosis: saw blade measurement, individual control, and more 📞 Contact us for an individual offer or a viewing. Delivery, installation, commissioning, and training possible as options.

Condition: used, Year of construction: 2003, SCM SANDYA 20 model 20 M3 135 calibrating and sanding machine, used Year of manufacture: 2003 Serial number: AE/024903 Maximum working width: 1350 mm Njdpfexwbydjx Akcela Feed speed: 3.5-18 m/min with inverter Working height: 4-170 mm Vacuum bed: 7.5 KW Configuration: 1st group: grooved steel calibration roller D. 250 – motor 22 KW 2nd group: sanding roller D. 250, hardness 45 SH – two-speed motor 9/11 KW, 1400/2800 rpm 3rd group: combined roller D. 170, hardness 30 SH + segmented elastic pad (46 segments) – motor 11 KW with inverter 4th group: scotch brite finishing roller Bed positioner with workpiece Belt size: 2620 x 1370 mm Blowers for 2nd and 3rd belt Automatic belt centering Electronic control of 1st / 2nd / 3rd roller / pad

Condition: used, Year of construction: 2008, machine/vehicle number: 0-411-49-1873, Technical data: - Manufacturer: Bütfering - Type: Optimat SGO 211/RC - Number of grinding units: 2 - Year of manufacture: 2008 - Working width: 1.100 mm - Grinding belt width: 1.120 mm - Grinding belt length: 1.900 mm - Workpiece thickness: 3-160 mm - Feed speed: 2,5-13 m/min. - Table height adjustment Standard equipment: - Automatic workpiece thickness adjustment - Stepless feed speed via requency converter. - 125 grinding programs can be stored - Wear-free braking system 1. Grinding unit (R) - Calibration roller - Profiled steel contact roller - Diameter 160 mm Nedpoyh Hwusfx Akcsla - Drive motor: 15 kW 2nd grinding unit (C) - Combination unit with roller and grinding shoe - Rubberized contact roller 65 Shore - Contact roller diameter 160 mm - Electronic link pressure bar with segment width 35 mm. - Belt speed: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood. - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz. - Compressed air consumption at 6 bar, 20 L/min. - Belt blow-off device per pressure surge 440 L/min. - Extraction volume: approx. 2,880 m3/h/ at 20 m/s - Extraction connection: Dedusting: 1 x Ø 160 mm (grinding unit, roller) 1 x Ø 160 mm (grinding unit, shoe) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock - Available from April 2026