Top Sanders

BIESSE NEW OPERA 7-4.3

Condition: good (used), Year of construction: 1984, SAC used jointer planer SAC FS 430 - 430 mm planing width - 2.90 m table length - 120 mm cutterhead with 4-knife strip knives - 3 kW, 380 volt motor - Automatic motor brake - 8 mm depth of cut - Fence tiltable up to 45° - Swing-away Aigner auxiliary fence - Bridge-type knife guard (cutter cover) - Low-noise design with serrated steel table lips - Extraction port - Weight: approx. 650 kg Location: at customer site Dcedpfjx Nrvvsx Ackeh - immediately available - Subject to prior sale

Condition: used, Year of construction: 2004, 10 spindle system. Connected load: 380/400V/50Hz, 34 kW. Dsdpfxswynzco Ackoch Glass thickness: 3-60 mm.

Condition: used, mileage: 75,000 km, power: 70 kW (95.17 HP), first registration: 04/2012, fuel type: diesel, overall weight: 3,498 kg, color: yellow, gearing type: automatic, emission class: euro5, number of seats: 2, loading space volume: 17 m³, loading space length: 4,400 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Year of construction: 2012, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Net sales price: €9,950 Mercedes Benz Sprinter MAXI – Box Body (SAXAS) Dcsdpewcv Dwjfx Acksh Euro 5 Emissions Standard Please no emails, as they can only be checked sporadically due to time constraints! Thank you for your understanding! Opening Hours and Further Information: Viewings and purchases possible without appointment: No prior arrangement necessary! Mon – Thu: 9:00 – 16:00 Fri: 9:00 – 13:00 Sat: 9:00 – 12:00 Address: Tabakried 11 84076 Pfeffenhausen If you have any questions, please contact Christian Hirsch or our friendly staff. TÜV: Will be renewed upon request with purchase - Full service history - 1 owner - LED interior lighting - Interior motion sensor - Sliding door between cab and box body - Reversing camera (see photos) - Various ventilation outlets - Foldable shelves - Electrically locked doors - Rear step Cargo space length: 4.40 m Cargo space height: 2.00 m Cargo space width: 2.00 m Special equipment: - Hill start assist - 220 A generator - Mechanically adjustable steering column - Radio pre-installation - Front mud flaps - Rear stabiliser - Reinforced front stabiliser - 95 Ah AGM battery Additional equipment: - Adaptive brake light - Driver airbag - Washer fluid level indicator - Electrically adjustable and heated exterior mirrors (both sides) - Exterior mirrors with integrated turn signals - 74 Ah battery - Brake assist - Braking system with ABS and ASR - Roof trim in cab - Lockable glove compartment - Body type: box body - Main fuel tank: 75 L - Headlight range adjustment - Truck registration - Engine: 2.1L – 70 kW CDI - Wheelbase: 4,325 mm - Smoker’s package - Tire repair kit with compressor - Low emissions according to Euro 5 - Seat upholstery: Lima fabric - Service interval indicator Assyst - Heat-insulating glazing - Permissible gross weight: 3.5 t For questions: Christian Hirsch Please try calling repeatedly as we are often in customer meetings. Further offers available at our website. Equipment details have been determined using VIN lookup; technical errors may occur. All information provided online is non-binding and for general description only. They do not constitute guaranteed specifications. Seller is not liable for typographical or data transmission errors, changes, or input mistakes. Subject to prior sale and errors.

Condition: excellent (used), functionality: fully functional, Surface planer HA 4 Planing width: 450 mm Total table length: 2500 mm Infeed table: 1500 mm Machine height: 820 mm Max. chip removal: 15 mm Dcodpfjinkfnsx Ackeh Cutterhead speed: 4800 rpm Motor power: 4 HP Weight: 660 kg 3-knife cutterhead Transport possible at extra cost! Due to the age of the used machine, warranty is excluded for business customers upon sale.

Condition: new, Vacuum lifter BARBARIC B3 swiveling, incl. crane - Exhibition unit - Including: - Vacuum lifter BARBARIC uniWood UWL 3, 150 kg Vertical and horizontal transportation of flat commercial commercially available boards (coated boards, natural wood panels) up to a panel size of 3,000 x 2,100 mm - a tilting range of 90° with pneumatic tilting mechanism - Complete with hoist and corresponding safety devices safety devices (vacuum manometer and manual manual slide valve with mechanical safety device) - uniWood traverse with 2 suction pads Ø 270 mm on an adjustable traverse (traverse length: 1,500 mm) Includes: - Optional reinforced BARBARIC uniWood version for easily permeable boards Load capacity: 250 kg with 2 oval suction pads 500 x 250 mm on an adjustable cross beam (cross beam length: 1,250 mm) and reinforced vacuum pump for permeable sheets. The reinforced design enables lifting materials weighing up to 250 kg. Includes: - BARBARIC uniWood comfort operation option All controls for the lifting gear and for the vacuum the vacuum lifter are integrated in one control unit - our special handling handle is accommodated. This makes it possible to operate the system and guiding the load in one-handed operation. The lifting process can be steplessly controlled by a frequency converter. The comfort version comes complete with hoist and corresponding safety devices (vacuum pressure gauge and 2-button safety control for releasing the load). Includes: - BARBARIC column-mounted slewing jib crane Lifting capacity on the lifting device: 250 kg The lifting capacity is the specified working load on the lifting device. Barbaric slewing jib cranes are designed for handling tasks in all areas of application and are extremely lightweight. SSK consisting of column, bracket and smooth-running jib. jib. Slewing and trolley travel by hand. The prerequisite for attachment is a suitably concrete floor (C20/R5, min. 20 cm). The static inspection of the floor must be carried out on site and documented accordingly. For fastening on cracked concrete or less load-bearing substrate, we offer enlarged base plates Djdpfxeu R Szaj Ackjch enlarged base plates on request. Fastening: Supplied with adhesive anchor for concrete floor When ordering without lifting gear, please specify the cable or hose type! Delivery includes: incl. sliding trolley, power supply and compressed air connection. - new exhibition machine -

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Dcsdpfx Asu Damdecksh

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine -Spindle adjustment: height and angle Dcsdpfxsh Nvyzj Ackeh -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Year of construction: 2013, condition: ready for operation (used), Connected load: 4kW, weight: 1t. Dcsdpfx Acohlp Efjkeh

Condition: new, functionality: fully functional, planing width: 530 mm, number of planer blades: 4, Equipment: motor brake, Houfek R 530 surface planer - 400V/50Hz, 5.5 kW (7.5 HP), width 530 mm 1.1 Motor 5.5 kW (7.5 HP), Tersa cutterhead 1.2 Total work table length 3100 mm 1.3 Dimension of the guide ruler 1300x150 mm with tiltable auxiliary ruler 1.4 Planed table 1.5 Upper control panel with ELGO Z60 digital display Dedpju Rnqqjfx Ackjch Electronic adjustment of the take-off 0 - 7 mm Tilt angle of the tiltable ruler 0°- 45° - Digital display Adjustment of the input table inclination (pointed/hollow joint) 1.6 Cover for the SUVAMATIC planing roller 1.7 4-knife planing roller D=120 mm 1.8 Automatic star/delta start of the motor 1.9 Electromagnetic brake 1.10 Suction nozzle with outlet D=150 mm 1.11 Blade setting gauge 1.12 Voltage 400V/50Hz 1.13 Packed in PE film as standard 1.14 Machine built according to CE power and safety standards

Condition: ready for operation (used), Year of construction: 2022, This BIESSE Selco WNT 630 panel saw was manufactured in 2022. It features a maximum cutting length of 3800 mm, saw blade projection of 108 mm, and a lift table capacity of 5 tons. Ideal for handling large panels up to 3660 x 2200 mm. If you are looking to get high-quality cutting capabilities, consider the BIESSE Selco WNT 630 machine we have for sale. Contact us for more information. • Working size: 3800 x 2200 mm • Max cutting length: 3800 mm • Saw blade projection: 108 mm • Max gripper opening: 100 mm • Min panel size: 1830 x 915 mm • Max panel size: 3660 x 2200 mm • Max packet height: 630 mm • Condition: Almost new, used only a few months Additional equipment • Back lift table: • Minimum panel thickness on lift table: 10 mm • Maximum lift: 985 mm • Lift table capacity: 5 t Dcjdpfx Aceyf I U Sekoh