Used Hauler Lt Wide Wall for sale (15,064)

Condition: used, Year of construction: 2024, operating hours: 350 h, functionality: fully functional, machine/vehicle number: LT40MG38SDHP5-2.6WSWR, cutting length (max.): 6,100 mm, total length: 8,200 mm, overall weight: 2,600 kg, height adjustment type: electric, cutting width (max.): 820 mm, Equipment: chassis, We are offering this used Wood-Mizer LT40 wide complete sawmill (mobile), manufactured in 2024. Cutting length: 6.1 m Cutting width (plank): 82 cm Maximum processable log diameter: 100 cm Nwedpfxjzagkzj Ai Asn Year of manufacture: 02/2024, approximately 350 hours of operation. Powered by a 38 hp gasoline engine. SW10 cutting thickness calculator. Electric saw head (forward, backward, up, down). Electric clutch for the engine. Hydraulic package 5 (almost fully equipped). Log lifter, 2 pull-down clamps, 2 balancing rollers (one powered), 3 vertical stops, 1 manual vertical stop for short logs, log turner, central log clamp. Laser. Road approval. Unfortunately, the rear bumper is slightly bent, but it is fully functional. In addition, I have the following items available: Approximately 60 saw blades. Protective cover. Almost new CookiMizer. Log holder for short and thin logs from Hesener. And other accessories, such as spare blade guide wheels, etc.

Condition: used, Year of construction: 2022, Woodmizer block bandsaw, year 2022, incl. debarker, electric height adjustment, electric feed, 900 mm max. log diameter, 11 kW, 10 m cutting length, 1000 kg Nodpfx Aijxlnf As Aswn

Condition: good (used), overall weight: 4,800 kg, Used for steaming pasta and other food products. Excellent condition, available for immediate loading. Njdpfx Ajxxd Imoi Aswn

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: B-0312, travel distance X-axis: 3,200 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 920 mm, total length: 10,000 mm, table length: 3,200 mm, table width: 2,050 mm, total width: 6,400 mm, spindle speed (max.): 8,000 rpm, total height: 4,700 mm, distance between stands: 2,700 mm, type of input current: three-phase, table load: 11,000 kg, workpiece weight (max.): 11,000 kg, overall weight: 36,000 kg, spindle mount: MK 5, spindle motor power: 21,000 W, CNC Gantry Machining Center VISION WIDE VTEC VF-3026 We are offering for sale an advanced, heavy-duty, large-format Vision Wide VTEC VF-3026 gantry machining center. The machine was manufactured on September 15, 2008. Designed for precise and high-performance machining of large molds, dies, and heavy steel and cast iron components. Featuring a renowned Heidenhain iTNC 530 control and extensive, progressively added equipment (two factory heads, probe, CTS), the machine provides significant production capabilities, excellent rigidity, and machining dynamics. GEOMETRIC PARAMETERS AND WORK AREA: Table dimensions: 3200 x 2050 mm Travel in the X-axis: 3200 mm Travel in the Y-axis: 2600 mm Travel in the Z-axis: 920 mm Maximum table load: 11,000 kg (11 tons) Clearance between columns: 2700 mm Distance from the spindle nose to the table: 150 - 1070 mm SPINDLE AND DRIVE SYSTEM: CNC control: HEIDENHAIN iTNC 530 Series Spindle motor power (Heidenhain): 18 / 21 kW (high torque) Spindle taper: ISO 50 / BT-50 (compatible with P50T-1 pull studs) Maximum spindle speed: 10,000 rpm Minimum spindle speed: 50 rpm EXTENSIVE PREMIUM EQUIPMENT (INCLUDED IN THE MACHINE PRICE): Automatic 90-degree tilting head, indexed every 5 degrees (Year of manufacture: 11/2011) – a modern accessory dedicated to efficient side machining. Maximum head speed is 3000 rpm. Wireless Heidenhain workpiece measuring probe – a radio measuring system integrated with the machine, enabling automatic referencing and dimension control directly on the machine table. Extension head / Spindle extension (Model: VF-3026AC, Year of manufacture: 09/2008) operating at a maximum speed of 4000 rpm. Through-spindle cooling system (CTS - Coolant Through Spindle) – a high-pressure coolant delivery system directly through the tool. AUTOMATIC TOOL CHANGER (ATC): Magazine capacity: 40 positions Tool holder type: BT-50 / CAT-50 Maximum tool weight: 18 kg Maximum tool length: 450 mm Maximum tool diameter: diameter 125 mm (diameter 215 mm with adjacent empty slots) STANDARD EQUIPMENT: Spindle cooling system Dual chip removal system: screw conveyor and belt conveyor Remote manual pulse generator for the operator Work area enclosure and work lighting Automatic lubrication system and Auto Power Off function Air blast through spindle Heat exchanger in the control cabinet Nodjztzl Sspfx Ai Aown Matching transformer Complete technical documentation and electrical diagrams DIMENSIONS AND POWER SUPPLY: Power consumption: 60 kVA (Three-phase AC power supply) Machine weight (net): 36,400 kg (36.4 tons) Overall footprint dimensions: approx. 10,000 x 6,400 x 4,700 mm

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 2,000 mm, travel distance Y-axis: 1,530 mm, travel distance Z-axis: 750 mm, spindle speed (max.): 6,000 rpm, controller manufacturer: FANUC, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Vision Wide Vision gantry milling machine was manufactured in 2016. It features an impressive X-axis travel of 2,000 mm, Y-axis travel of 1,530 mm, and Z-axis travel of 750 mm. The spacious work table size of 2,000 × 1,530 mm makes it ideal for large, flat workpieces. If you are looking to get high-quality milling capabilities, consider the Vision Wide Vision gantry milling machine we have for sale. Contact us for further details. • Highlights: • Modern machine (2016) designed for low maintenance and easy integration into production lines • Large work envelope suitable for large, flat workpieces (mold making, aerospace, mechanical construction) Nodpszqc A Tefx Ai Aewn Technical Specification Taper Size BT 50

Condition: used, operating hours: 19,216 h, total width: 2,300 mm, total height: 2,400 mm, total length: 2,420 mm, Year of manufacture: 1998 Colour: White Empty weight: 2.000 kg - Year: 1998 Nwsde Aazaaepfx Ai Asn - CE marking present: Yes - Serial number: 98055541 - Operating hours: 19216 - Number of units [pcs]: 3 - └ Unit 1: - - Position: Right - - Type of unit: Contact roller - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1300 - - Roller diameter [mm]: 250 - - Roller material: Rubber - - Motor power [kW]: 18.5 - └ Unit 2: - - Position: Right - - Type of unit: Contact roller - - Sanding belt length [mm]: 1900 - - Sanding belt width [mm]: 1300 - - Roller diameter [mm]: 170 - - Roller material: Rubber - - Motor power [kW]: 15 - └ Unit 3: - - Position: Top - - Type of unit: Texturing brush - - Roller diameter [mm]: 140 - - Motor power [kW]: 0.55 - Max. working width [mm]: 1300 - Min. working height [mm]: 2 - Max. working height [mm]: 165 - Infeed table length [mm]: 120 - Outfeed table length [mm]: 800 - Feed motor [kW]: 1.5 - Feed speed: Manual - Min. feed speed [m/min]: 5 - Max. feed speed [m/min]: 25 - Feed speed control: Continuously adjustable - Voltage [V]: 400 - Current consumption [A]: 35 - Fuse [A]: 63 - Power [kW]: 37.0 - Transport dimensions: 2420mm x 2300mm x 2400mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2002, operating hours: 5,500 h, functionality: fully functional, machine/vehicle number: A20430 RC1, feed rate Y-axis: 512 m/min, total width: 2,480 mm, total height: 2,500 mm, total length: 3,660 mm, working width: 1,650 mm, grinding width: 1,650 mm, grinding height: 200 mm, working height: 200 mm, table height: 780 mm, height adjustment type: electric, type of input current: three-phase, conveyor belt speed: 75 mm/s, grinding belt length: 2,620 mm, workpiece height (max.): 200 mm, table length: 3,400 mm, table width: 1,650 mm, input frequency: 50 Hz, input voltage: 380 V, workpiece width (max.): 1,800 mm, Calibrating machine with integrated PC-based adjustment and color touch screen. Two rubber rollers plus a third buffer roller. Used machine, operated on a non-intensive cycle, solely for sanding spruce (soundboards for pianos, harps, and other small musical instruments). On average, it has been used for 5-6 hours/week – 230 hours/year. Feed conveyor belt in perfect condition (replaced). Nodo Aduanspfx Ai Aewn Operating and maintenance manuals AVAILABLE.

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 668, cutting width (max.): 2,500 mm, overall weight: 2,000 kg, total length: 3,000 mm, total width: 2 mm, total height: 2,200 mm, input frequency: 50 Hz, input current: 10 A, Equipment: crane, This machine is unique! It has a working width of up to 2500 mm and requires very little space. In addition, it can independently lift the rolls and also lift the finished rolls out of the machine using a crane. The working speed is approximately 172 m/min, and the maximum winding diameter is 400–550 mm. The machine has 5 knife holders and a positioning laser for the empty cores. It can process 76 mm (3 inch) as well as 152 mm (6 inch) cores. The unwinding brake is regulated via an ultrasonic sensor to ensure consistent winding tension. The machine has 2 ionizing bars to prevent static charging. Nodpj Aban Eefx Ai Aswn

Condition: good (used), Year of construction: 2009, operating hours: 2,500 h, functionality: fully functional, We are offering this used Costa Delta TRI-T-T 1350 wide belt sanding machine, manufactured in 2009. Nwedpfjzx Tgrjx Ai Ajn The machine has only 2500 operating hours and is in good condition. Further details can be found in the data sheet. If you have any questions or require further information, please do not hesitate to contact us.

Condition: excellent (used), SCM sandya 3s 950mm WIDE BELT SANDER Njdpj Afunhefx Ai Ajwn Sanding width: 950 MM 1 calibrating unit with a metal roller 2 combination unit with a rubber roller and sanding pad The sanding pad has an oscillating motion One motor for 2 units - 7.5 kW Oscillation controlled by photoelectric cells 2 feed speeds Electric table adjustment Table position display Thickness gauge Very good condition, inspected, ready for operation

Condition: new, axle configuration: 3 axles, suspension: air, color: other, Axle brand: BPW Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Tire tread depth left: 100%; Tire tread depth right: 100% Rear axle 2: Tire tread depth left: 100%; Tire tread depth right: 100% Rear axle 3: Tire tread depth left: 100%; Tire tread depth right: 100% Damage: None Njdpfx Aezx Slasi Ajwn

Condition: used, Year of construction: 1985, Working width 1350 mm Number of sanding units 3 st. VIET Wide-Belt Sanding Machine, Type Valeria 3CCT TM1350 ----- Sold on behalf of a client. The machine can still be viewed in operation for a short time! Machine No.: 30036022 Technical Specifications & Units ----- Working width: 1,350 mm Main drives: 3 separate electric motors located at the machine base to drive the sanding belts. Feed system: Perforated vacuum conveyor belt (vacuum bed) with an upstream rubberized infeed roller and a preceding roller table. Internal Unit Configuration: • 3 sanding belt stations. • Mechanical belt oscillation via upper tracking rollers. • Integrated pneumatic belt-cleaning blow-off systems (blow-off pipes located on the inner side of the units). • 1 unit equipped with a manually adjustable dial indicator/fine-adjustment mechanism on the sanding platen. Pneumatic Controls (upper control panel): • Pressure gauges and control valves for: belt tension (minimum tension), brake cylinders, belt oscillation, and internal pressure (for the sanding platen). • 3 separate toggle switches for the belt blow-off/air-jet systems (units 1, 2, and 3). Electrical Control Panel (right-hand control panel): • 3 analog ammeters to display the load on the sanding belt motors. • 1 analog voltmeter. • Digital height display/thickness setting. • Main switches for the individual units (belt 1, belt 2, belt 3). • Selector switch for feed direction (climb milling/down-cut vs. conventional/up-cut mode). Technical specifications according to the manufacturer – no guarantee! Nwsdpo Adfddjfx Ai Asn

Condition: used, Year of construction: 2015, SANDYA 900 - WIDE-BELT CALIBRATING AND FINE-GRINDING MACHINE S900 RRT 135 KEY FEATURES 2,620 MM LONG GRINDING BELTS FOR OPTIMAL SURFACE QUALITY AND PRODUCTIVITY PHOTO CELLS WITH SYSTEM WITH BACKGROUND SUPPRESSION: THE CORRECT CENTERING OF THE GRINDING BELT IS ALWAYS GUARANTEED FLOATING PRESSURE ROLLERS: ACCURATE AND CORRECT SUPPORT OF THE WORKPIECES UNDER ALL WORKING CONDITIONS TECHNICAL DATA Working width mm 1,350 Min./max. working height mm 4-170 Grinding belt width mm 1,370 Grinding belt length mm 2,620 Motor power 1st unit kW (HP) 11 (15) Motor power 2nd/3rd unit kW (HP) 11 (15) Gear motor kW (HP) 0.6/1.3 (1.8/1.7) Feed speed m/min 4.5/9 GENERAL FEATURES: Machine frame and work table* Steel structure with electrical control cabinet on the front of the machine * Insertion of the grinding belts from the left side of the machine * motorized table height adjustment * Main motors integrated into the machine frame Electrical equipment* Electromechanical control panel on the left front side of the machine * automatic star-delta starter for the main motor * motor protection switches for the motors * motors in insulation class IP 54 Safety and protective devices* automatic brake for immediate stopping of the units * emergency stop switch at the workpiece infeed * emergency stop switch at the workpiece infeed and outfeed * lockable main switch * automatic emergency shutdown of the machine in case of: - grinding belt breakage - grinding belt not tensioned - protection against lateral deflection of the grinding belt - lack of compressed air - overload of the main motors Note: the standard version with 400 volts 50 Hz requires a three-phase power supply + neutral conductor + earth conductor. If the 400-volt power supply is without a neutral conductor, a single-phase transformer must be ordered in addition from the price list. The same transformer must also be ordered for a machine with a voltage higher than 400 volts, regardless of whether a neutral conductor is available or not. Machine version with 220 or 230 volts (50 or 60 Hz) is available at an additional cost (see price list). BASIC MACHINE STANDARD EQUIPMENT - R175/85 rubber-coated calibrating roller, diameter 175 mm, 85 Shore - 1st position - R220/65 rubber-coated calibrating and grinding roller, diameter 220 mm, 65 Shore - 2nd position - Hard grinding shoe with manual adjustment of the working height - Replaceable graphite cloth - Motor power 1st unit 11 kW (15 HP) - Motor power 2nd and 3rd unit 11 kW (15 HP) - Electronic ammeter for the main motor to display the current consumption - Electronic display of the working height - Electronically controlled grinding belt oscillation - Rubber pressure rollers - Recoil protection at the infeed before the first unit - Rubber feed belt 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Belt feed with two speeds 4.5 / 9 m/min with gear motor - Automatic belt centering European safety regulations (CE marking) 1 piece SANDYA 900 RRT 135 - Calibrating and fine-grinding machine 1 piece First and second "R" unit with roller and third "T" unit with grinding shoe Voltage 400 EU 1 piece Frequency 50 Hz 1 piece "C plus" version for RRT 1 piece with: - pneumatic switching on and off of the roller – 1st unit "R" - pneumatic switching on and off of the roller – 2nd unit "R" - "MESAR 46" electronic oscillating grinding shoe - electronic adjustment of the working height - Selection of belt running direction 2nd grinding belt 1 Nwsdpfj Aflwyex Ai Aon

Condition: like new (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 2013.11.293, overall weight: 8,000 kg, HEESEMANN MFA IMPRESSION 2013 WIDE BELT SANDER – JBS Industrial wide belt sander HEESEMANN MFA Impression from 2013, manufactured in Germany. The machine is designed for sanding wood surfaces and wood-based materials. It is a solution for carpentry workshops, furniture manufacturers, door manufacturers, and manufacturers of finishing elements. Through-feed material transport and roller tables on the infeed and outfeed sides facilitate the handling of large parts. The operator panel with a screen enables control of the machine's operation, and side doors provide access to the sanding units. TECHNICAL DATA: – brand: HEESEMANN, – model: MFA Impression, – manufacturer: Karl Heesemann Maschinenfabrik GmbH & Co. KG, – year of manufacture: 2013, – country of manufacture: Germany, – machine number: 2013.11.293, – operating voltage: 400 V, – frequency: 50 Hz, – total power according to the nameplate: 97 kW, – rated current: 205 A, – control voltage: 24 V DC / 230 V AC, – total weight: 8000 kg, – CE marking. EQUIPMENT: – operator panel with screen, – belt conveyor, – infeed roller table, – outfeed roller table, – sanding units with separate drives, – CSD pressure system marking, – connections for dust extraction system, – pneumatic elements with a pressure gauge, – emergency stop buttons, – side access doors to the units. Njdpfxjz Rnugj Ai Aewn Transportation to the specified address can be arranged for an additional fee. Please contact us for more information. We invite you to contact us and view our other listings. WHERE CAN YOU SEE OUR MACHINES? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE jbsmaszyny.pl

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: A80722MM2, grinding width: 1,350 mm, power: 31 kW (42.15 HP), height adjustment type: electric, Automatic leveling wide belt sander suitable for fine sanding of solid wood. This sander belongs to the top range of automatic wide belt sanders and stands out, in particular, for its small machine size, perfect sanding quality, ease of operation, and high reliability. It was used for final sanding of solid parquet. 2 main units: soft sanding cylinders, 1350 mm Additional units: Scotch-Brite brush, cleaning brush, cleaning air blowers Total maximum power consumption: 31 kW Sanding width: 1350 mm Max. workpiece height: 160 mm Constant working height of the machine – suitable for integration into a production line Motorized adjustment of working thickness with LCD display Continuously adjustable feed rate of the conveyor belt Continuously adjustable speed of both working units Pneumatic blowers for the working units Nsdoy Idxyjpfx Ai Aewn Ammeter for monitoring motor load Remote shutdown of units from the control panel Stop with 4 positions for compensating for belt grit Perforated conveyor belt with the option of vacuuming up parts Roller extension of the table at the input and output Pneumatic oscillation, electronically controlled CE safety standard Weight: 3800 kg Year of manufacture: 2008 Damage to the first sanding cylinder – see photo Negotiable price: 25,000 EUR (excluding VAT) The machine is fully functional and sold in its current condition. In stock in Telnice, near Brno – Czech Republic Testing, demonstration, and operator training are included.

Condition: used, Year of construction: 1994, functionality: fully functional, Wide-belt sanding machine, Bütfering Vega 113 Year of manufacture: 1994 Location: Freising Nwedpj Aaz Nuofx Ai Ajn Inspection is welcome. We have other used machines available. Please contact us.

Condition: good (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: G2512-01, total width: 1,600 mm, total height: 2,150 mm, total length: 2,550 mm, working width: 450 mm, overall weight: 2,600 kg, power: 46.4 kW (63.09 HP), grinding belt speed: 14,000 mm/s, type of input current: three-phase, grinding belt length: 1,900 mm, compressed air connection: 6 bar, grinding belt width: 470 mm, air demand: 6 m³/h, input voltage: 400 V, operating pressure: 6 bar, workpiece width (max.): 450 mm, Grindingmaster wide-belt sanding machine, equipped for wet sanding, with 2 top-mounted sanding units and a brush unit (Scotch-Brite). Nwjdpoyn E H Refx Ai Ajn The machine is used for surface finishing of metal parts with a width of up to 450 mm. A dust collection container with filter fleece is located at the bottom. Technical drawings, operating instructions, and the CE declaration are available. The machine is in good, partially refurbished condition. Further technical information can be found in the document.

Condition: good (used), Year of construction: 2017, Deburring/grinding machine from Costa Type MD4 VC 1150 Belt width 1150 mm Vacuum table For grinding and minimal edge rounding Nwodpfxs Aayf Uo Ai Aon Equipped with an AL-KO dust extraction system (excluding filters)

Condition: used, Year of construction: 2012, operating hours: 8,600 h, functionality: fully functional, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness copper (max.): 5 mm, For sale: Combined sheet metal and tube laser cutter BLM ADIGE-SYS LT COMBO. This machine is designed for both sheet, tube, and profile cutting in a single system – an ideal solution for versatile and flexible production. The machine is connected and fully operational; it can be inspected and observed working in real time. Single owner. Full service history available, the machine has been regularly maintained with annual servicing. Manufacturer: BLM Group Model: ADIGE-SYS LT COMBO Year of manufacture: 2012 Technology: Fiber laser Source: 3 kW LT Combo Tube and profile cutting diameter: 16 – 225 mm Tube input length: 6.1 m; output length: 6.1 m Cuts to zero – leaves no remnants Sheet table: 1500 x 3000 mm Cutting capacity: ALU 10 mm; Stainless Steel 12 mm; Brass 5 mm; Steel 20 mm Laser cutting hours: 8,600 h (as of 2026-02-27) Total machine hours: 72,000 h (as of 2026-02-27) Other: spare laser cutting head included Nwodpfxjyaavdj Ai Aon If you have any further questions, we would be happy to assist you.

Condition: excellent (used), Year of construction: 2022, 2020 Costa Levigatrici MD6 CRR 1350 Heavy Duty Sheet Metal Deburring Machine With Multi Extraction Units, Roller Conveyors & Touchscreen Control. Working Width 1,350mm. Working Thickness 3-150mm. Feed Length 'X'=2,680, Feed Length 'Y'=1,380mm. Variable Feed Control Upto 25m/min. Motor Power 57kW. Roller Table Dimensions L3,000 x W1,480 x H920mm. Vertical Cyclone Extraction Unit W1,420 x D1,420 x H4,850mm. S/No. MC028008A (2020). Nsdpfxs Ad D U Ie Ai Aewn With Walker Prodry Water Filtration Unit. Machine Weight 4,800kg. Location: Bowron St, Stockton-On-Tees, TS20 2BH, United Kingdom

Condition: ready for operation (used), functionality: fully functional, working width 950 mm calibrating unit with metallic roller combination unit with rubber roller and automatically engaged shoe star-delta start pneumatic oscillation controlled by photocells Nsdpfjzz Nkrsx Ai Aewn two conveyor feed speeds motor power 11 kW year of manufacture 2000 power supply 400V weight 975 kg

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: AB00016224, overall weight: 1,672 kg, type of input current: three-phase, workpiece height (max.): 170 mm, input frequency: 50 Hz, input current: 40 A, input voltage: 400 V, workpiece width (max.): 1,100 mm, Equipment: double-sided, Machine in excellent condition. Vacuum table included. For sale due to new acquisition. Nsdpfx Aez Rzyvji Aown

Condition: excellent (used), functionality: fully functional, Year of construction: 1999, machine/vehicle number: 065980102, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Adige, laser type: CO₂ laser, laser power: 50 W, sheet thickness (max.): 10 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, pipe diameter (max.): 140 mm, pipe length (max.): 6,000 mm, input voltage: 400 V, input current: 85 A, input frequency: 50 Hz, type of input current: three-phase, type of cooling: water, overall weight: 5,500 kg, total length: 2,300 mm, total width: 1,500 mm, total height: 8,000 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, emergency stop, safety light barrier, Used Adige industrial laser machine for cutting sheet metal, with an integrated control panel and automated system for metal processing. Laser Tubic for cutting pipes and metal profiles, suitable for cutting square, rectangular, and round pipes. Year of manufacture: 1999. YouTube video: Fortza.ro or on WhatsApp. The machine is in perfect working order and in good condition. Nwsdpfx Asz H Trusi Ajn Cutting dimensions up to 14 cm. Optionally, for an additional fee, the company offers servicing, dismantling, and relocation services for the machine, including assistance with preparing it for transport and reinstallation.

Condition: good (used), Year of construction: 1970, Column jib crane, overhead crane, workstation crane -Manufacturer: Demag, wall-mounted jib crane, lifting capacity 1000 kg Nwedpe Adzazsfx Ai Aon -Projection: 5070 mm -Swivel range: 270° -Chain hoist: DEMAG type PK5NF -Main stroke: 5.0 m/min -Fine stroke: 1.25 m/min -Hook travel: 4300 mm -Transport dimensions: 5300/1310/H400 mm -Weight: 316 kg

Condition: good (used), WIDE BELT SANDER SCM Sandya 10 Nodoyy Nnkjpfx Ai Aown Sanding width 1100 mm First unit with hard rubber calibrating roller Second combination unit with soft rubber roller and pad Single motor for both units - 18.5 kW Pneumatic oscillation Adjustable feed speed Electric table adjustment Table position display Thickness gauge Good condition, tested and ready for demonstration