Bulkhead buy used

Recognised location: Ashburn (US) (Change)
Enter e-mail address
or
Move
1
LxHxD: 2300 x 2300 x 760 mm Electricity 400V 1.0kW Extraction - 2x 400mm Qz3nelk2 more
5
Truck trailer, low bed, low-bed trailer-surrender in the current condition as seen container lock-Schwerlastösen-perm. Total weight 18,000 kg payload 14,800 kg cargo area 6900 x 2450 mm, loading height 1000 mm air suspension bulkheads 600 mm Empty weight about 5000 kg Qlik9txqw more
6
Article number: MA 994 Manufacturer: VEB Waggonfabrik Gotha / LEV - VEB Lokomotivbau Hennings village Type: BZ 57 - dual direction Bbx0wghfk Year of construction: 1957 Length [m]: 10.9 bulkhead / total length 12 m Width [m]: 2.2 Height [m]: 3,115 Weight [kg]: 8400 Number of seats: 22 Standing room: 83 Axles: 2 Doors: 4 doors Other: documentation more
5
Dry bulkhead with supply air-supply air heat exchanger with type STM 20-5/16 2.0 Heat output 116 KW / h hot water connection DN 32 would be connected to your existing heating (gas wood-oil heating) supply air filter dimensions 4070/500 / H2100 mm bulkhead dimensions 2500/680/H1900 mm heat exchanger dimensions 2900/1300/H1150 mm weight approx 1500 kg Qkr9xnzfw more
3
The data for this colour mist spray wall are no longer readable. This bulkhead was used until now in a Carpenter's shop, she is currently on a solid wood base. Cmtbq9yq Length: 250 cm Height: 170 cm + 75 cm suction Depth: 60 cm Pickup - trucks available! more
6
Tip height 230 mm Circulation Ø over machine bed 460 mm Circulation Ø over slide 240 mm Circulation Ø without bed bridge 650 mm Top width 1000 mm Forward 58 mm Spindle mount DIN 55029 camlock ASA D1 - 6 " 12 speeds 25-2000 RPM Bed width 400 mm Feed (longitudinal) 0.032 - 0,898 mm / Rev Feeds (transverse) 0.016 - 0,449 mm / Rev Thread (metric) 0.4 - 14 mm / Rev Threads (inch) 56-2 Gg/1 " Engine power 400 V / 50 Hz / 5500 Watt Tailstock MK 4 Dimensions L x W x H 2180 x 910 x 1640 mm... more
6
Spraier: Centrifugal fan with 6.000m3 / h capacity, with the bulkhead, Drying: Centrifugal fan with 6.000m3 / h performance, with channel Fresh air: with 2 channels, channel reduction, with Schalldaemmkanal, aspiration, H8ihfav Grinding: Centrifugal fan with 5.400m3 / h capacity, bag filters, with tubing, with regulation and control cabinet. Disassembled, immediately ready for loading! more
4
Barge, volume approximately 28 m self-propelled with hinged bottom, diesel engine bulkhead sealing drive 360, Schutenlänge 16.00 m, width 3.00 m, height 1.50 m, the hold approximately 11.00 mx width 2.00 m, height 1, 30 m S9jhvjyhe more
6
Rippert bulkhead with subsequent drying tunnel for furniture part, which are guided by means of a feed through a drying tunnel. System can be viewed under power and can be tested for functionality. Technical details and data sheets available on request. Thank you, Xeswkdrpu more
2
heavy fire bulkhead with counterweight used Oeegdlk2g manufactured by Spaenex width 1300 mm height 1900 mm material transport 2 x D 350 mm located in 97447 Gerolzhofen sale in current condition as seen - free on truck - more


bulkhead
every day

New machines via email!

Be informed!
5
The distinctive advantages: Space-saving compact design - comfortable and powerful. Excellent surface quality and pleasant working environment by diagonal low-turbulence airflow. Large capture window by air deflectors - suitable even for large workpieces. Separation of paint mist up to 99%, rear retaining capacity of the filter up to 18 kg / m ² - big filter booth time! Quick and easy filter change on the front page. Low-cost replacement filters. Wrykpbg8n Low cost and extremely low e... more
1
Technical specifications :KEY DATATop height above bed mm 270Max: Circulation diameter over bed guides mm 540Max. Circulating diameter in the recess mm 680Max. Turning diameter over cross slides mm 360Distance between centers mm 1000-1500-2000-3000Bed width 350 mmStroke of the slit mm 330SPINDLESpindlesase (D1) No. 8/11Spindle bore mm 85On request against surcharge mm 105Number of spindle speeds n 18Speed ​​range rpm 25 - 1540Speed ​​range infinitely variable with inverter rpm 27 - 2250TAILSTOCK... more
2
Drive überSchaltgetriebe 3-axis DigitalanzeigeSchnellwechselstahlhalter Algra, system as multi fix A incl. 5 holder (4 x rectangle, 1 round) 3 - jaw Chuck bison 3204/DIN6350, Ø 500 mmFixer grains longitudinal stop for a PositionKühlmitteleinrichtung rear Chip bulkhead over the entire length control and train spindle cover protection for the lathe chucks tool holders protection leveling bolt and plate tailstock with SchnellklemmungReduzierhülse for the ReitstockpinoleReitstock motion driven by el... more
1
OptiTurn TU 1503V - lathe with electronically adjustable speed figure shows TU 1503V The new compact lathe with electronically variable speed DC motor Ribbed prismatic bed made of gray cast iron, inductively hardened and ground Hardened and ground slideways Guaranteed concentricity precision of the spindle nose better than 0.015 mm concentricity - lathe chuck max 0.05 mm With leading spindle for threading or automatic longitudinal turning with longitudinal, slide and top slide Automatic longitud... more
2
Drive überSchaltgetriebe 3-axis DigitalanzeigeSchnellwechselstahlhalter Algra, system as multi fix A incl. 5 holder (4 x rectangle, 1 round) 3 - jaw Chuck bison 3204/DIN6350, Ø 500 mmFixer grains longitudinal stop for a PositionKühlmitteleinrichtung rear Chip bulkhead over the entire length control and train spindle cover protection for the lathe chucks tool holders protection leveling bolt and plate tailstock with SchnellklemmungReduzierhülse for the ReitstockpinoleReitstock motion driven by el... more
2
Drive through Schaltgetriebe3-axis DigitalanzeigeSchnellwechselstahlhalter Algra, system like Multifix C incl. 5 holder (4 x rectangle, 1 round) 3 - jaw Chuck bison 3295/DIN6350 400 mmFixer grains FrequenzumformerEilgänge (4) FußbremseLängsanschlag main motor for a PositionStehende and running with Lynette coolant device rear chip bulkhead over the entire length control and train spindle cover protection for the lathe chucks tool holders protection leveling bolt and plate tailstock with Schnellk... more
2
Drive überSchaltgetriebe 3-axis DigitalanzeigeSchnellwechselstahlhalter Algra, system as multi fix A incl. 5 holder (4 x rectangle, 1 round) 3 - jaw Chuck bison 3204/DIN6350, Ø 500 mmFixer grains longitudinal stop for a PositionKühlmitteleinrichtung rear Chip bulkhead over the entire length control and train spindle cover protection for the lathe chucks tool holders protection leveling bolt and plate tailstock with SchnellklemmungReduzierhülse for the ReitstockpinoleReitstock motion driven by el... more
2
Drive through Schaltgetriebe3-axis DigitalanzeigeSchnellwechselstahlhalter Algra, system like Multifix C incl. 5 holder (4 x rectangle, 1 round) 3 - jaw Chuck bison 3295/DIN6350 400 mmFixer grains FrequenzumformerEilgänge (4) FußbremseLängsanschlag main motor for a PositionStehende and running with Lynette coolant device rear chip bulkhead over the entire length control and train spindle cover protection for the lathe chucks tool holders protection leveling bolt and plate tailstock with Schnellk... more
2
Drive überSchaltgetriebe 3-axis DigitalanzeigeSchnellwechselstahlhalter Algra, system as multi fix A incl. 5 holder (4 x rectangle, 1 round) 3 - jaw Chuck bison 3204/DIN6350, Ø 250 mmFixer grains longitudinal stop for a PositionKühlmitteleinrichtung rear Chip bulkhead over the entire length control and train spindle cover protection for the lathe chucks tool holders protection leveling bolt and plate tailstock with quick clamp low voltage machine light operating instructions equipment in accorda... more
5
Country of origin - BulgarienAntrieb variable transmission (3 levels) 3-axis digital display Fagor with CSS (constant cutting speed) quick change Toolpost Algra, system like Multifix C incl. 4 holder (3 x rectangle, 1 round) 3 - jaw Chuck bison 3204/DIN6350, Ø 250 mmFixer grains of main motor with FrequenzumformerEilgänge (4) FußbremseLängsanschlag for a PositionStehende and running with Lynette coolant device rear chip bulkhead over the entire length control and train spindle cover protection f... more
2
Drive überSchaltgetriebe 3-axis DigitalanzeigeSchnellwechselstahlhalter Algra, system as multi fix A incl. 5 holder (4 x rectangle, 1 round) 3 - jaw Chuck bison 3204/DIN6350, Ø 315 mmFixer grains longitudinal stop for a PositionKühlmitteleinrichtung rear Chip bulkhead over the entire length control and train spindle cover protection for the lathe chucks tool holders protection leveling bolt and plate tailstock with quick clamp low voltage machine light operating instructions equipment in accorda... more
2
Drive through Schaltgetriebe3-axis DigitalanzeigeSchnellwechselstahlhalter Algra, system like Multifix C incl. 5 holder (4 x rectangle, 1 round) 3 - jaw Chuck bison 3295/DIN6350 250 mmFixer grains FrequenzumformerEilgänge (4) FußbremseLängsanschlag main motor for a PositionStehende and running with Lynette coolant device rear chip bulkhead over the entire length control and train spindle cover protection for the lathe chucks tool holders protection leveling bolt and plate tailstock with quick cl... more
2
Drive überSchaltgetriebe 3-axis DigitalanzeigeSchnellwechselstahlhalter Algra, system as multi fix A incl. 5 holder (4 x rectangle, 1 round) 3 - jaw Chuck bison 3204/DIN6350, Ø 160 mmFixer grain length stop for a PositionKühlmitteleinrichtung rear chip bulkhead over the entire length control and train spindle cover protection for the lathe chucks tool holders protection leveling bolt and plate tailstock with quick clamp low voltage machine light operating instructions equipment in accordance wit... more
2
Drive variable transmission (4 steps) 3-axis digital display Fagor quick change steel holder Algra, system like Multifix B incl. 4 holder (3 x rectangle, 1 round) 3 - jaw Chuck bison 3204/DIN6350, Ø 200 mmFixer grains longitudinal stop for a PositionKühlmitteleinrichtung rear chip bulkhead over the entire length control and train spindle cover protection for the lathe chucks tool holders protection leveling bolt and plate tailstock with quick clamp low voltage machine light operating instruction... more


bulkhead
every day

New machines via email!

Be informed!

to

to

Change search
BULKHEAD
SELL IMMEDIATELY
on Europe's market leader for as little as € 0,79 per ad.
Find out more now


Phone: +44 (0) 20 806 810 84
or sell immediately
Try our Machineseeker app now!
Machineseeker app for iPhone and Android.
Want to really stop the chat history?
Yes No
×
Machine Finder chat
Name E-mail Your message to the Dealer
START CHAT WITH DEALER
  You are chatting with: 
  Your contact person: 
  
Your contact is typing
SEND MESSAGE
  You are chatting with: 
  Your contact person: 
  
Your contact seems to be inactive
Chat window close