Used Plastic Welding Machine for sale (68,852)

Year of construction: 1999, condition: excellent (used), working width: 620 mm, machine/vehicle number: SE 01510 A10, Heating Element Welding Machine HP60/40 by BRANSON The drive is hydraulic, supported by positioning and control systems. The machine is equipped with its own vacuum pump. Only a few operating hours (approx. 6,800 hours). Usable heating element area: width 600 mm x depth 400 mm Max. workpiece dimensions: - Max. width: 620 mm - Max. depth: 420 mm - Max. upper height: 350 mm Bodpfx Aeykvdlegdjdf - Max. lower height: 350 mm (Combinations of part heights possible, depending on contour) - Max. processing temperature for contact method: 400°C The modular frame design allows for easy conversion and retrofitting. The side doors and the front door in the welding area can be easily opened (for rapid retooling). The automatic safety lift door ensures a high level of operator safety. The temperature control units on the operator panel have actual/target displays. The control device is a Siemens PLC HMI. The machine is controlled by a Siemens PLC (S7-300 controller). Heating elements are equipped with temperature sensors for temperature regulation and serve as safety cut-offs in case of overheating. The pin systems in the tool mounting surfaces ensure reproducible positioning. Advantages of heating element welding technology: - Reliable welding of workpieces with low or varying wall thicknesses. - Low scrap rate due to dimensionally accurate and repeatable welds. - Precise time, temperature, and force control enable welding of sensitive parts. - Virtually all thermoplastics can be welded with this process. - Different thermoplastic types can be joined (compatibility needs to be verified). Technical data of the machine: - Power supply: 3 x 400 V AC + N + PE - Power: 25 kVA - Rated current: 20 A - Required cable cross-section: 5 cables, each 6 mm² - Required pneumatic connection: 6 bar Machine dimensions: - Machine width: approx. 1.22 m - Machine width with operator panel: approx. 1.8 m - Machine depth: approx. 2.1 m - Machine depth with operator panel: approx. 2.6 m - Machine height: approx. 2.4 m - Machine height with raised safety door: approx. 2.85 m (open door) Machine weight: approx. 2.2 t

Year of construction: 2012, condition: used, Welding machine, plastic welding machine, plastic socket welding machine, plastic welding machine, PE pipe welding machine, plastic pipe welder, socket welding tool set -Manufacturer: Ritmo, socket welding tool set type R 63 TFE -Voltage: 230V Bdedpfx Ageqy Rl Hedof -Power: 1400W -Sleeves: Ø 16 - 63 mm, see photo -Dimension box: 450/350/H130 mm -Weight: 8.4 kg

Condition: used, functionality: fully functional, Year of construction: 2014, power: 8 kW (10.88 HP), platform length: 4,100 mm, overall weight: 2,850 kg, transport length: 5,700 mm, transport width: 1,330 mm, transport height: 1,300 mm, construction height: 1,300 mm, Equipment: CE marking, The WORK SP 4000 CNC butt welding machine for plastic sheets is manufactured by the Czech company METAL WORKING CZ, s.r.o. It was produced in 2014, is in excellent condition, and comes with a spare Teflon coating. This is a high-tech industrial machine with CNC control, designed for the precise welding of thermoplastic sheets and panels. The main technical parameters and features of this machine series include: Main technical parameters: Maximum working width (welding length): 4000 mm, allowing for the processing of very large plastic sheets. Thickness of materials to be welded: Typically in the range of 2 mm to 25–30 mm (depending on the specific modification and type of plastic). Compatible materials: Thermoplastic sheets made of PE (polyethylene), PP (polypropylene), PVDF (polyvinylidene fluoride), and PVC (polyvinyl chloride). Welding type: Butt-welding with a heating element, using the heated element / hot plate welding method. Control and CNC functionality: Fully automatic cycle: The CNC control precisely manages all phases of the welding process: preheating, transfer time, welding pressure creation, and cooling time. Material database: A system with pre-set welding parameters according to international standards (e.g., DVS standards for welding plastics). Data logging: Automatic generation and recording of welding protocols for quality control (containing information on pressure, temperature, and cycle duration). Advantages of the design: High mechanical stability: A massive steel frame ensures even distribution of pressure along the entire length of the 4-meter sheet. Hydraulic system: Precise adjustment of the clamping force, guaranteeing a homogeneous weld seam without internal stresses. Teflon coating: The heating element is equipped with a high-quality non-stick coating for easy cleaning and to prevent material burning. Length: 5700 mm Width: 1330 mm Height: 1300 mm Weight: 2850 kg Working length: 4100 mm Working height of the machine: 950 mm Minimum thickness of the plastic sheet: 4 mm Maximum thickness of the plastic sheet: 40 mm Machine power: 8 kW Operating voltage - electrical circuits: 3 PEN 50Hz 400/230V Bjdpfozdiz Njx Agdsdf Air consumption: 0.8 m³/h Minimum pneumatic pressure: 0.8 MPa Maximum pneumatic pressure: 1.0 MPa Standard for electrical equipment: EN 60204-1 Applicable basic and technical standards: See Chapter 3.3 of the manual Maximum noise level at the workstation: 70 dB If you have any further questions or need more information, please send us a message or call.

Condition: new, Year of construction: 2025, HW 1.5kW is a high-performance, compact fiber laser welding machine designed for maximum efficiency and precision. Technical Specifications: Laser Source Power: 1.5 kW (MAX Laser Source) Bodpfxszkkaye Agdedf Welding Speed: 0 - 120 mm/s Welding Spot Adjustment: 0 – 5 mm (Spiral Wobble function) Wire Feeding: Automatic system included Fiber Cable Length: 15 meters Power Supply: 220V / 380V Dimensions: 1,000 x 630 x 910 mm Weight: 230 kg Certification: CE Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Year of construction: 1997, condition: used, The equipment will be available for sale starting March 2027, as it is currently still in use within the production process Please state your offer price. Price without packaging and transportation; Payment in advance. You need to make us a price offer is you are interested about the machine. The hand over will be at our location Terms of delivery: EXW Cugir, Romania The buyer can assist in disassembling the machine. The buyer is responsible for transporting the machine. We organize only the loading part of the machine on the trailer/truck with forklift/crane Bedpsza T A Refx Agdedf

Condition: used, Injection molding machine ARBURG, type Allrounder 320 C 600-100 Year of manufacture: 09/2002 Clamping force: 60 tons Bodezqglrepfx Agdodf Screw diameter: 25 mm The machine will be dismantled on August 17, 2026, and transported to our warehouse or directly to your location.

Condition: used, 1 unit of BRANSON 8100 ultrasonic welding machine including table Bdodpszqcm Eofx Agdof Color: as shown in the pictures, according to the images and inspection Condition: used

Condition: defective spare-parts repository (used), functionality: not functional, Manufacturer: DALEX PMS 11-4 Arm length: 350 mm Power: 100 kVA Bodpfjzp Iazsx Agdsdf The machine is out of service, and its condition is unknown.

Condition: defective spare-parts repository (used), functionality: not functional, NIMAK BMP 20/200 spot welding machine for sale Arm length: 300 mm Power: 200 kVA Bdjdpfx Agezp H Ukjdef The machine is out of service, and its condition is unknown.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 3,000 mm, type of cooling: water, welding current (max.): 420 A, ESAB Power Mig LAW 420W – Water-cooled MIG/MAG Refurbished, serviced, tested and ready for immediate use 3-month warranty Specifications: 420 AMP 380 Volt Water-cooled 2/4 Step / 4 Roller drive Burnbacktime adjustable End current Including: 4-metre welding torch, ground cable with clamp, gas hose, and 1-metre interconnecting cable. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. Bedpfx Agozqywuodjdf We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, input voltage: 400 V, nominal power (apparent): 10 kVA, electrical fuse: 10 A, welding power (max.): 5 kVA, nominal power at 50% duty cycle: 5 kVA, overall weight: 200 kg, workpiece weight (max.): 200 kg, Processes bi-metal, carbide, wood, and stainless steel saw blades up to 50 mm wide, with a 6-stage welding current control for a wide range of blade dimensions and materials. A hydraulic tensioning device on both sides – operated via a foot switch – keeps both hands free for blade positioning and ensures reliable electrode contact with up to 10 kN of clamping force. Equipped with the GTR pyrometer option: the annealing temperature is set and monitored contactlessly according to a pre-defined recipe, and the process cycle ends automatically for reproducible, operator-independent welding quality. The machine is from 2019, is in very good condition, is water-cooled, and is ready for immediate use in production. Bdodpfx Ajzqdkxjgdsf Manufacturer and model: iDEAL BAS 050-11 Rated power (ED 50%): 4.5 kVA Secondary voltage: 2.6 – 4.4 V (6 stages) Clamping force: 10 kN (hydraulic) Maximum compression force: 2.2 kN Machine weight: approx. 180 kg Hydraulic tensioning, operated via foot switch Pyrometer (GTR): yes (temperature display on the touch panel) Connection voltage: 380 – 419 V Bi-metal/carbide saw blades: 6×0.6 – 34×1.1 mm Wood saw blades: 6×0.4 – 50×1.0 mm Stainless steel saw blades: 6×0.4 – 25×0.5 mm Blade dimensions: 6×0.4 – 30×0.6 mm Blade steel S235JR: max. cross-section 75 mm² Blade steel X5CrNi18-10: max. cross-section 40 mm² Pyrometer / GTR: The integrated pyrometer (GTR) enables contactless temperature measurement during the annealing process. The target temperature is pre-defined in a recipe and displayed on the panel – the annealing cycle ends automatically when the set temperature is reached, eliminating operator-dependent variations and ensuring consistent welding quality.

Condition: excellent (used), Manufacturer: ARBURG Model: Allrounder 270-S-400-70 Year of manufacture: 2010 Serial number: 214269 Bedpfxsx Eirwo Agdjdf Control system: Control system: Arburg Selogica Direct Operator panel: operator terminal Control cabinets: complete control and power supply cabinets Clamping unit parameters: Clamping force: 400 kN Injection unit parameters: Screw diameter: 18 mm Part handling system: Manufacturer: ARBURG Type: Multilift Number of axes: 3-axis extraction robot Moulded part transport: Cycle conveyor – length/width: 2,000 × 800 mm

Condition: excellent (used), Manufacturer: R+D Custom Automation Type of equipment: Semi-automatic assembly and ultrasonic welding machine Application: Production of medical bags and tubes Serial number: 19-11231 Supply voltage: 240 V AC Bdedpfx Agjznvfijdef Supply frequency: 60 Hz Number of phases: 1 Rated current (Full Load Amps): 20 A Maximum motor power (Max H.P.): N/A Compressed air requirement: 1 CFM at 90 psi SCCR (Short Circuit Current Rating): 300 kA RMS Enclosure type: NEMA 12 Drawing number: D-11030-2-02

Year of construction: 2022, condition: new, Manufacturer: Hermann Ultraschall (Herrmann Ultrasonics) Type of equipment: Ultrasonic welding machine Bodpfx Agjznvcnedodf Model: HiQ G1 Dialog 20/2400 LF Serial number: 20.087/21 Year of manufacture: 2022 Generator power: 2400 W Operating frequency: 20 kHz Welding force (at a pressure of 8 bar): minimum: 30 N maximum: 2490 N Working stroke: 150 mm

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, Fiber laser welding machine with 2000-watt laser power 4-in-1 device Welding with automatic wire feed Welding without wire Cleaning Cutting - Top device at a top price from our showroom - approx. 10 operating hours - 2kW laser source by MaxPhotonik - German-language menu navigation - Universal device for welding / cutting / cleaning - incl. 4-roller welding wire feeder - integrated water cooling - immediately available Also take advantage of our attractive leasing/financing offers. Bodjug Unfjpfx Agdsdf Approx. machine dimensions: Width: 60cm Height: 120cm Depth: 110cm Weight: approx. 150kg

Condition: like new (used), functionality: fully functional, type of input current: AC, input voltage: 230 V, ground cable length: 4,000 mm, type of cooling: air, hose package length: 3,000 mm, welding current (min.): 5 A, welding current (max.): 200 A, Unused Lascentrum MIG/TIG 200 ACDC Synergic MIG & TIG ACDC for steel, stainless steel and aluminium. Ideally suited for use at home, on site, for general welding work, light steel/stainless steel/aluminium construction, and in the workshop. 5-200 AMP 230 Volt Synergic ACDC TIG Pulse 2/4 Step Gas pre flow / Gas post flow Start current / End current Up slope / Down slope Pulse Time / Pulse Frequency AC Balance / AC Frequency adjustable AC Wave adjustable Spot welding Fixed programs / Program memory Elektrode option Including: SB150 Welding torch 3 Meter SR17 Tig Welding torch Earth cable 3 Meter 35mm² Elektrode cable Gas hose Manual (If in the original packaging) Original Packaging Bdodpfx Agszqc U Aodsf 3 Months Warranty of Cjays The machine is unused and comes from a stock lot. No manufacturer’s warranty from Lascentrum applies. Test Welding is possible in our Workshop in Valkenswaard Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: like new (used), functionality: fully functional, total height: 450 mm, total width: 240 mm, total length: 670 mm, input voltage: 400 V, ground cable length: 4,000 mm, type of cooling: air, hose package length: 4,000 mm, welding current at 60% duty cycle: 250 A, welding current at 100% duty cycle: 200 A, welding current (min.): 15 A, welding current (max.): 300 A, Unused Lascentrum MIG 300 DP-3 Synergic Double Pulse MIG/MAG for steel, stainless steel and aluminium. Ideally suited for on-site work, general welding, medium-duty steel/stainless steel/aluminium structural work, and in the workshop. 15-300 AMP 400 Volt Synergic Puls / Double Pulse 2/4 Step / 4 Roller Drive Fixed Programs / Program Memory Stick Option Including: SB250 3 Meter Welding Torch Earth Cable 3 Meter 35mm² Electrode Cable Gas hose Manual (If available in the Packaging) Original packaging 3 Months Warranty The machine is unused and comes from a stock lot. No manufacturer’s warranty from Lascentrum applies. Test welding is available at our workshop in Valkenswaard. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. Bdedjzqc Aaopfx Agdef All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Condition: excellent (used), Water-cooled, pneumatically operated rocker-arm spot welding machine Manufacturer: DALEX, Type: SL 25-1 Rated power at 50% duty cycle: 25 kVA Secondary short-circuit current: 22.4 kA Secondary open-circuit voltage: 1.8 - 5.2 V Bdsdpfexvh Hbsx Agdsf Electrode force: 278 daN Arm spacing: 140 or 300 mm Arm extension: 180-500 mm with mounting control cabinet according to VDE 0100 with main switch Synchronous welding timer MPS 15033

Condition: new, Year of construction: 2023, OKIO 2000W Automatic 4-Axis Fiber Laser Welding Machine Power: 2 kW Country of Origin: China Number of Axes: 4 Travel in X-axis: 500 mm Travel in Y-axis: 300 mm Travel in Z-axis: 300 mm Bjdpfopq Nzaox Agdsdf Worktable Dimensions: 350 mm × 450 mm Travel Speeds: Y-axis: 10 m/min X-axis: 10 m/min Z-axis: 5 m/min Positioning Accuracy: ±0.02 mm 4th Axis: Positioner Rotational Positioning Accuracy: ≤0.05 mm Power Supply: 220 V/380 V Power Requirement: 7.5 kW Machine Dimensions: 500×1400×1900 mm Weight: 280 kg Chiller Welding Source: MAX Mounting Plate, Welding Head Visual CCD Monitoring System – uses a high-resolution camera and monitor to improve welding efficiency and quality The automatic OKIO laser welding machine enables welding of metal components in straight lines, circles, and any arbitrary paths, such as those found in mobile phone housings, mobile phone batteries, sensors, medical devices, and other industries. Laser welding machines use high-energy pulsed lasers to weld objects. High energy and high laser pulse density ensure smooth welds, a narrow weld seam, and a small heat-affected zone.

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: NS-009-0000-300, type of input current: AC, nominal power at 50% duty cycle: 250 kVA, throat depth: 300 mm, short-circuit current: 50,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,000 mm, total height: 1,850 mm, overall weight: 1,000 kg, open-circuit voltage: 22 V, Zens Multifunction Resistance Welding Machine 250 kVA MF – 23 kN – 50 kA – Year of Manufacture 2013 For sale is a high-quality Zens multifunction resistance welding machine in a robust industrial design. The system was developed for demanding resistance welding processes and is ideally suited for series production in the automotive, supplier, electrical, and metal industries. The machine operates with modern medium frequency (MF) technology and achieves a welding power of 250 kVA at a 50% duty cycle. The powerful SER medium frequency inverter (700 A) enables a maximum welding current of 50 kA and ensures maximum process stability as well as reproducible welding results. With a maximum welding force of 23 kN and an overhang of 300 mm, the system is suitable for a wide range of resistance welding applications. Technical Data Manufacturer: Zens Machine Type: Multifunction Resistance Welding Machine Year of Manufacture: 2013 Welding Power: 250 kVA (Medium Frequency / MF) at 50% duty cycle Max. Welding Current: 50 kA SER Medium Frequency Inverter: 700 A Welding Control: SER-Mega1 Maximum Welding Force: 23 kN Overhang: 300 mm Equipment CE-compliant protective enclosure CE safety light curtain Welding table for welding forces up to 23 kN Pressure compensation tool QSF-M quality assurance system Position measuring system for process monitoring PLC control (Siemens S7) Robust industrial design for continuous industrial operation The combination of powerful medium frequency technology, precise force and position control, and modern PLC and SER welding control ensures high process reliability and consistently reproducible welding results. Thanks to the complete CE safety equipment, the machine can be easily integrated into existing production lines. Bjdezqucfepfx Agdodf The system is in good condition and can be inspected and demonstrated at any time by prior appointment.

Condition: refurbished (used), functionality: fully functional, type of input current: three-phase, input voltage: 380 V, ground cable length: 4,000 mm, type of cooling: water, hose package length: 15,000 mm, welding current at 60% duty cycle: 500 A, welding current at 100% duty cycle: 400 A, welding current (min.): 20 A, welding current (max.): 500 A, Esab Origo Mig 502cw – Water-cooled MIG/MAG Refurbished, serviced, tested and ready for immediate use 3-month warranty Specifications: 20-500 AMP 380 Volt Water-cooled 2/4 Step / 4 Roller Drive Burnbacktime adjustable End current Elektrode option Including: 4 Meter Welding Torch, earth cable with clamp, gas cable, and 15 metre interconnection hose. Visits by appointment only. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. Bodpfxozp Dznj Agdsdf The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties.

Year of construction: 2003, condition: ready for operation (used), A fully enclosed Soyer CNC coordinate stud welding system is available. Travel X/Y: 750mm/750mm, table dimensions X/Y: 1240mm/1000mm, max. table load: 100kg, positioning accuracy: +/-0.2mm, positioning speed: 24m/min, welding heads: 2, welding head type: Soyer SK-5AP, vibratory feeder: Soyer UVR-300, welding unit type: MBS-10N, stud size range: M3-M8. Machine dimensions X/Y/Z: approx. 1500mm/2050mm/1700mm, weight: approx. 1000kg, control: PC, operating hours: approx. 20000h. Including two welding units, two universal vibratory feeders, stud holders, plungers, ground clamps and feed hoses. Documentation available. An on-site inspection is possible. Bdedpjzqfwmsfx Agdef

Condition: used, Year of construction: 2008, functionality: fully functional, Single-head welding machine Bdjdpszpyfcefx Agdsf

Year of construction: 2023, condition: used, voltage 400 V 50 Hz V current intensivity 100 A output 36 kw compressed air 4,5 bar weight 3.200 kg In our assessment, the laser welding system is in like-new condition. Technical features: - Welding of pressed-in components in the cooling plate - 3000W fiber laser - Pneumatic suction of the cooling plate including rotary device - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved. Bsdpfx Agozbvn Eododf

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: N-0048182, type of input current: AC, nominal power at 50% duty cycle: 250 kVA, throat depth: 350 mm, short-circuit current: 50,000 A, input voltage: 400 V, type of cooling: water, total width: 1,000 mm, total length: 1,200 mm, total height: 1,750 mm, overall weight: 750 kg, open-circuit voltage: 12 V, Dalex MF Resistance Welding Machine PMS 32-6 – Year of Manufacture 2016 – Excellent Condition For sale is a high-quality Dalex medium-frequency resistance welding machine, type PMS 32-6, in very good technical and visual condition. Technical data: Manufacturer: Dalex Type: PMS 32-6 Year of manufacture: 2016 Welding power: 250 kVA (medium frequency) Max. welding current: 50 kA Welding force: 215 ... 1290 daN Welding control: Harms & Wende with PQS (Process Quality System) User-friendly touch screen operation Bdodpfozpxr Iex Agdof Integrated displacement measuring system for the welding cylinder for precise process monitoring The machine is ideally suited for demanding resistance welding tasks and, thanks to its modern medium-frequency technology, guarantees high process reliability, excellent welding quality, and energy-efficient operation. Condition: The welding machine is in excellent condition, well-maintained, and ready for immediate use. Inspection and functional testing are possible by arrangement.