Used Vertical Injection Molding for sale (9,744)

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, clamping force: 6,500 kN, screw diameter: 70 mm, injection pressure: 2,389 bar, ejector stroke: 135 mm, opening stroke: 1,825 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen opening force: 169 kN Moving platen closing force: 144 kN Mounting platen (H x V): 1,520 x 1,470 mm Clear distance (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 675 mm Daylight: 1,825 mm Hjdpfx Ageycqc Telsh Ejector stroke: 135 mm Ejector force forward/backward: 226 kN Injection Unit Screw diameter: 70 mm L/D ratio: 23 Injection pressure: 2,389 bar Shot volume: 1,097 cm³ Shot weight (PS): 998 g Injection flow rate: 393 cm³/s Screw speed: 218 rpm Plasticizing rate: 83 g/s Nozzle contact force: 173 kN MACHINE DETAILS Dimensions & Weight Required floor space approx.: 8.70 x 2.90 x 2.80 m Total weight: 44,000 kg Electrohydraulic Equipment Rated power pump motor: 75 kW Installed heating capacity: 36 kW Temperature control zones cylinder heating: 7 EQUIPMENT Oscillating elements 1 x air valve 8-fold pneumatic cascade control Accumulators 2 x hydraulic core pulls at BWAP 2 x hydraulic core pulls at FWAP Robot interface according to EUROMAP 67

Year of construction: 2016, condition: ready for operation (used), overall weight: 9,500 kg, General Data Machine weight 9500 kg Hedpfx Agex D Hp Reljh This Engel Insert 90 was manufactured in 2016. A vertical injection moulding machine with a total run time of only 54 hours and a weight of 9,500 KG. Consider the opportunity to buy this Engel Insert 90 vertical injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: like new (used), Year of construction: 2021, operating hours: 200 h, functionality: unexamined, machine/vehicle number: S/ NOS : 248534, 248535, 248536, clamping force: 3,800 kN, screw diameter: 60 mm, displacement volume: 877 cm³, injection weight: 300 g, ejector stroke: 210 mm, plate length: 1,140 mm, plate width: 1,140 mm, overall weight: 20,400 kg, type of input current: three-phase, input frequency: 60 Hz, input voltage: 480 V, year of last overhaul: 2024, number of digital displays: 1, Equipment: CE marking, documentation/manual, unit sold as is where is Two colors injection molding machine (two shots) Three machines available , price is per machine Manf. : Engel Austria Model : e-Motion 740H / 50MV / 420 T Combi US Hodpfx Aex Szwhjgleh S/ NOS : 248534, 248535, 248536 Year Built : 12/2021 Condition : very good Material : THERMOPLAST Clamping Force : 420 Ton Injection Unit 1 : 740/. H-arrangement Injection Unit 2 : 50/. MV-arrangement Machine Net W : 20 400 Kg Gross Dim of crate : 23’ x 8’ 10” x 9’ 7” (H) Capacity : 427 Ton Shot Size : 10.2 oz Second Shot Size : 0.45 oz Tie Bar Spacing : 30.7" x 30.7" Platen Size : 44.89" x 44.89" Min /Max Mold Height : 45.3"/61" Clamp Stroke : 27.55" Ejector Stroke : 8.26" Control : CC300 Voltage : 480 Min/Max Mold Height : 43.3" - 61.02" 2-Shot Injection Molding Press Main Injection Unit: 10.2 oz (45mm) Secondary Vertical Injection Unit: .45 oz. (18mm) Core Pull Pneumatic Valve Gate Including: Engel Viper Robot

Condition: reconditioned (used), functionality: fully functional, clamping force: 220 kN, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 22M injection moulding machine. Hodpfxeyfphas Agloh Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. *The video shown in this listing is of a previously refurbished BOY 22M which is very similar to the BOY 22MA machine we are currently refurbishing. Please contact the team if you would like to see the machine in person.

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we offer the following well-maintained used injection moulding machine as part of our injection moulding machinery dealership. Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Current Notice – Tax Advantage for Used Machinery Starting from 01.07.2025, used machines may also benefit from a special depreciation allowance of 30% per year for tax purposes. In addition to the lower purchase price compared to a new machine, you can claim the same depreciation amounts as with new equipment. Keyword: Growth Booster (§ 7 Sec. 2 EStG-E). Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower, 2-Color/2-Component Machine Control System: MC6 Year of Manufacture: 2014 Machine No.: 61020507 Operating Hours: 47,137 h 1st Injection Unit: 750 horizontal Injection unit/screw diameter: 50 mm Shot volume: 393 ccm Shot weight: 357 g Heating power: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1892 bar 2nd Injection Unit: 180 vertical Injection unit/screw diameter: 30 mm Shot volume: 85 ccm Shot weight: 77 g Clamping Unit Clamping force: 130 t / 1300 kN Opening stroke: 600 mm Hodpfjyf Uy Ujx Agljh Tie bar distance: 470 x 470 mm Platen size: 745 x 770 mm Max platen spacing: 900 mm Min. installation height of mould: 300 mm Ejector stroke: 150 mm / Ejector force: 23 kN Weight: 9,000 kg Extras Nozzle side: Needle shut-off A+C; 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blow-off Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blow-off Cooling water BGS with 6 circuits each on nozzle and ejector sides BluePower Technology: up to 40% energy savings The machine has been very well maintained and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Delivery terms: free loaded onto buyer's truck, or free delivered to site against reimbursement of freight costs. Further information about the machines we offer and our company: - All machines we sell are purchased from ongoing production for our own stock in Hannover. - Every machine is inspected and tested before dismantling. - We do NOT deal in insolvency assets, nor do we act as brokers dealing with third-party goods. - All machines come from successful enterprises where regular maintenance and servicing are the standard. - All machines offered can be inspected at our warehouse.

Condition: good (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 211886, Plastic Injection Molding Machine | Arburg Allrounder 630 S 2500-170 Clamping force [kN]: 2,500 Number of components: 3 Clamping platen width [mm]: 900 Clamping platen height [mm]: 900 Clear tie bar distance, horizontal [mm]: 630 Clear tie bar distance, vertical [mm]: 630 Centering ring diameter [mm]: 160 Min. installation height [mm]: 400 Max. installation height [mm]: 700 Max. opening stroke [mm]: 600 Max. ejector stroke [mm]: 225 Hodpfjyf Ha Hjx Agleh Thread [M]: 24 Rotary table type: turntable Rotary table diameter [mm]: 900 Rotary table thread [M]: 20 Max. mold weight [kg]: 2,500 Max. mold weight, moveable side [kg]: 2,500 Screw diameter [mm]: EE1: 30, EE2: 25, EE3: 25 Max. shot weight [g] PS: EE1: 83, EE2: 59, EE3: 58 Aggregate configuration: EE1: horizontal, EE2: vertical, EE3: L-position Equipment: 2-core pull, robot Inspection is possible at any time by appointment. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: ARBURG | Multi 3K | 630S

Condition: excellent (used), Year of construction: 2011, operating hours: 34,217 h, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, total length: 5,940 mm, total width: 2,000 mm, total height: 2,000 mm, overall weight: 8,300 kg, Injection Moulding Machines ARBURG Allrounder 570 H 2000-800 Stock No.: 503669 Manufacturer: ARBURG Model: Allrounder 570 H 2000-800 Control System: Selogica Year of Manufacture: 2011 Operating Hours: 34,217 h For sale is a used ARBURG Allrounder 570 H 2000-800, year 2011. This machine features a screw diameter of 50 mm and a clamping force of 2000 kN. Hodeydkyzopfx Agljh Ideally suited for efficient and precise injection moulding applications in plastics processing. Contact us for further information and a customised offer! Technical Data – Clamping Unit Clamping force: 2000 kN Tie bar spacing (h x v): 570 x 570 mm Platen size (h x v): 795 x 795 mm Min. mould height: 250 mm Max. mould height: 550 mm Max. daylight: 1000 mm Opening stroke: 450 mm Ejector stroke: 200 mm Ejector force: 60 kN Movable platen centring diameter: 125 mm Fixed platen centring diameter: 125 mm Mould weight: 1300 kg Technical Data – Injection Unit Screw diameter: 50 mm Shot volume: 392 cm³ Injection pressure: 2000 bar Screw length: 20 l/d Screw stroke: 200 mm Screw speed: 60 rpm Screw torque: 1000 Nm Free-flow injection rate: 656 g/s PS Number of heating zones: 8 Nozzle stroke: 400 mm Dimensions & Weight Machine dimensions (LxWxH): 5.94m x 2m x 2.21m Total weight: 8300 kg Equipment HMI in German Levelling elements EUROMAP 67 handling interface EUROMAP 73 interface Mould heating 12x

Condition: used, Year of construction: 2017, operating hours: 35,502 h, functionality: limited functionality, machine/vehicle number: 1207Q036, clamping force: 4,000 kN, screw diameter: 80 mm, clearance between the columns: 700 mm, displacement volume: 2,010 cm³, injection pressure: 162 bar, injection weight: 1,890 g, mold height (min.): 245 mm, ejector force: 111,000 N, ejector stroke: 205 mm, opening stroke: 655 mm, total length: 7,700 mm, total width: 1,950 mm, total height: 2,240 mm, overall weight: 15,500 kg, heating capacity: 24.5 kW (33.31 HP), pump power: 37,000 W, Equipment: documentation/manual, 400 Tonne Borche machine less than 10 years old. General good condition with some small wear on a couple of toggle pins. Report on machine status and video of the machine running available on request. Hodjyftl Aopfx Agljh

Condition: excellent (used), Year of construction: 2005, operating hours: 76,000 h, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Typ: KM300-1900C2 Baujahr: 2005 Schließkraft: 300 Tonnen Holmabstand 630 x 630 mm Schnecken DN: 60 mm Hedpfxjxyq S Us Agljh Max. Hubvolumen: 754 cm³ Spritzteilgewicht: 679 g/PS Steuerung: MC5 Ausstattung: 2 St. Kernzug Schnittstelle Roboter Werkzeuginnendruckmessung 24- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät Ca. 76.000 Betriebsstunden

Condition: excellent (used), Year of construction: 2014, operating hours: 43,500 h, functionality: fully functional, machine/vehicle number: 194413, clamping force: 2,200 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,578 bar, injection weight: 440 g, mold height (min.): 300 mm, ejector stroke: 180 mm, opening stroke: 750 mm, overall weight: 12,740 kg, heating capacity: 13.4 kW (18.22 HP), Here, as a specialized dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: As part of our business, we also purchase well-kept injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Tax Information – Special Depreciation Benefits for Used Machines From 01/07/2025, used machines can also be tax-deducted in Germany with a special depreciation of 30% per year. In addition to the lower purchase price compared to a new machine, you can apply the same depreciation allowances as for new machinery. Keyword: Growth Booster, (§ 7 Paragraph 2 EStG-E) Manufacturer: Engel Model: VC 750 / 220 Control system: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection Unit - Screw diameter: 55 mm - Shot volume: 475 ccm - Shot weight: 430 g - Heating capacity: 13.4 kW - Heating zones: 5 - Nozzle stroke: 350 mm Hsdpfjyc Ewxsx Agljh - Injection pressure: 1179 bar (up to 1578 bar increased) Clamping Unit - Clamping force: 220 t / 2200 kN - Opening stroke: 757 mm - Max platen distance: 1050 mm - Min mould installation height: 300 mm - Ejector stroke: 180 mm / Ejector force: 80 kN Weight: 12,740 kg Extras - Core pull The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Delivery terms: - Free loaded onto buyer’s truck or delivered free to site against reimbursement of freight costs Information about our machines and company: - We only sell machines we have purchased from active production, stocked at our Hanover warehouse - All offered machines are tested and inspected before dismantling - We do NOT sell insolvency assets or act as brokers dealing in third-party property - All machines originate from successful, well-maintained operations - All machines offered can be inspected in our warehouse

Condition: used, Year of construction: 2017, Serial no. 141342-100, control system type Unilog B8, clamping force 1,800 kN, clear tie bar spacing 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, maximum daylight 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, maximum mould weight 1,800 kg, minimum mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, screw L/D ratio 22, 1 hydraulic core pull, calculated shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/nozzle force 350 mm/40 kN, injection unit/dosing unit by Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot by Wittmann, type WP80, year 2020, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 15,564 Hsdpfx Ageyc Symsleh This item is part of an online auction. Sale is subject to approval by the client.

Condition: used, Year of construction: 2017, Ser.-No. 140228-100, Control system type Unilog B8, clamping force 1,800 kN, tie bar clearance 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, platen gap max. 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, max. mould weight 1,800 kg, min. mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 2 hydraulic core pulls, calculated shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/nozzle force 350 mm/40 kN, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2017, sprue picker/robot by Wittmann, type WP80, year 2021, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 17,844 This item is part of an online auction. Hsdpsyc Staefx Agljh The sale is subject to the approval of the seller.

Condition: used, Year of construction: 2017, Ser.-No. 138524-100, Control unit: Type Unilog B8, Clamping force: 1,100 kN, Tie bar clearance: 470 x 420 mm, Mould installation height: 200 - 450 mm, Opening stroke: 380 mm, Maximum platen distance: 830 mm, Ejector stroke (hydraulic/electric): 140/125 mm, Ejector force: 25 kN, Dry cycle time: 1.5 s per 294 mm, Maximum mould weight: 1,000 kg, Minimum mould dimension: 296 x 296 mm. Injection unit: Type 350, Screw diameter: 25 mm, Screw stroke: 175 mm, Screw L/D ratio: 22, 1 hydraulic core pull, Calculated shot volume: 85.9 - 220 cm³, Specific injection pressure: 1,595 - 3,000 bar, Maximum screw speed: 350 rpm, Screw torque: 340 - 500 Nm, Nozzle stroke/nozzle force: 250 mm/40 kN. Dosing unit: Manufacturer Movacolor. Injection/dosing unit: Manufacturer Wittmann, Type Feedmax S3-NET, Year 2017. Sprue picker/robot: Manufacturer Wittmann, Type WP80, Year 2018, Travel axes X/Y/Z: 100 x 550 mm x 90°, Compressed air hose reel: Manufacturer Metabo, Type SA250, L 25 m. Machine weight: 4,800 kg, Operating hours: 42,853. Hedpfxoyc Sqxj Agloh This item is part of an online auction Sale is subject to the approval of the client.

Condition: used, Year of construction: 2017, Serial no. 138522-100, control system type Unilog B8, clamping force 1,100 kN, tie bar clearance 470 x 420 mm, mould installation height 200 - 450 mm, opening stroke 380 mm, max. platen distance 830 mm, ejector stroke hydraulic/electric 140/125 mm, ejector force 25 kN, dry cycle time 1.5 s per 294 mm, max. mould weight 1,000 kg, minimum mould size 296 x 296 mm, injection unit type 750, screw diameter 35 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, theoretical shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, max. screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/force 350 mm/40 kN, dosing unit by Movacolor, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot by Wittmann, type WP80, year 2021, travel paths X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 5,200 kg, operating hours 36,180. Hedpfsyc Snkox Agljh This item is part of an online auction. Final acceptance subject to the approval of the seller.

Condition: used, Year of construction: 2017, Serial No. 138264-100, control system type Unilog B8, clamping force 1,800 kN, clear tie bar spacing 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, maximum platen distance 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, maximum mould weight 1,800 kg, minimum mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, theoretical shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, maximum screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/force 350 mm/40 kN, dosing unit by Movacolor, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot by Wittmann, type WP80, year 2021, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 46,038. This item is part of an online auction. Hjdpfeyc Sh Dox Aglsh The sale is subject to the approval of the seller.

Condition: reconditioned (used), operating hours: 27,716 h, functionality: fully functional, clamping force: 220 kN, screw diameter: 24 mm, clearance between the columns: 254 mm, displacement volume: 36 cm³, injection pressure: 1,455 bar, injection weight: 32 g, total length: 1,980 mm, total width: 815 mm, total height: 1,897 mm, overall weight: 1,105 kg, Now fully refurbished by the team at STV Machinery is this Boy 22M-HV machine. It has a horizontal clamp unit and a vertical injection unit which it makes it suited for split-line injection. It is fitted with a 24mm diameter screw. Manufactured in 2006 and has less than 28,000 hours. Hodpfx Asx U Ay Nogloh Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: refurbished (used), operating hours: 42,000 h, functionality: fully functional, clamping force: 220 kN, screw diameter: 24 mm, clearance between the columns: 254 mm, displacement volume: 36 cm³, injection pressure: 1,455 bar, injection weight: 32 g, total length: 2,430 mm, total width: 810 mm, total height: 1,620 mm, Our team are currently working on the refurbishment of this BOY 22M injection moulding machine. This machine is fitted with a 24mm screw. BOY machines are very popular due to their small footprint. Any machines awaiting or undergoing refurbishment by us can be reserved with a 10% deposit. As this machine is already underway, you can expect this machine to be fully refurbished by our in-house experts within a matter of weeks. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Hsdpfx Agsx U Axfsloh *The video shown in this listing is of a previously refurbished BOY 22M which is very similar to the BOY 22M machine we are currently refurbishing. Please contact the team if you would like to see the machine in person.

Condition: excellent (used), Year of construction: 2012, operating hours: 44,600 h, functionality: fully functional, 1,0 St. gebr. Rundtisch Spritzgießmaschine Hsdpfeycc I Ijx Aglsh Hersteller: ARBURG Typ: 1500T2000-800 Baujahr: 2012 Schließkraft: 200 Tonnen Drehtisch; 2 x 180° Schnecken DN: 45 mm Max. Hubvolumen: 313 cm³ Spritzteilgewicht: 291 g/PS Steuerung: SELGOCIA Ausstattung: 1 x Kernzüge

Condition: good (used), Year of construction: 1992, Clamping force: 500 kN Screw diameter: 30 mm Weight: 3,200 kg Hedpfx Agovygh Neleh Available immediately from stock

Condition: excellent (used), Year of construction: 2019, Clamping force 500 kN Opening force 40 kN Opening stroke 250 mm Screw diameter 15 mm Hodpfxsxrymlj Agljh Including 2 pcs. WITTMANN temperature control units Including spare screw 15 mm Including complete documentation Immediately available from stock

Condition: good (used), Year of construction: 1998, Screw diameter: 25 mm Hodpfovxh Iujx Agljh Clamping force: 25 tons Opening stroke: 350 mm Weight: 2,900 kg Immediately available from stock

Condition: used, Year of construction: 2005, Injection molding machine Manufacturer: Krauss Maffei Type: KM350/1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Mold opening force: 220 kN Moving platen drive force: - Opening: 105 kN - Closing: 95 kN Mounting platen (H x V): 1,060 x 1,095 mm Clearance between tie bars (H x V): 710 x 710 mm Mold opening stroke: 920 mm Minimum mold installation height: 380 mm Daylight: 1,300 mm Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Hsdjxu Uvajpfx Aglsh Installed heating capacity: 30 kW Cylinder heating zones: 6 Dry cycle time: 1,550 1/h Oil tank capacity: 720 liters Dimensions and weights: Net weight with control cabinet: approx. 16.0 t L/W/H: 6,510 x 2,040 x 2,380 mm Max. mold weight: 4,780 kg Injection unit: - Work capacity: 1900 - Screw diameter: 70 mm - Injection pressure: 1,778 bar - Shot volume: 1,047 cm³ - Shot weight for PS: 953 g - Injection flow rate: 527 cm³/s Screw speed standard / option: 285/349 rpm Screw torque standard or Stage 1: 95 PS Screw torque option or Stage 2: 117 PS Nozzle contact force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated operator panel with TFT color display and 3.5-inch floppy disk drive for data backup Plasticizing: 1 complete thermoplastic plasticizing system in wear-resistant design, screw diameter 70 mm with backflow valve and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm

Condition: good (used), Year of construction: 2002, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Typ: KM575-1900C2 Baujahr: 2002 Schließkraft: 575 Tonnen Holmabstand 1000 x 1097 mm Schnecken DN: 70 mm Max. Hubvolumen: 1.097 cm³ Spritzteilgewicht: 998 g/PS Hedpfx Agsyak Htoleh Steuerung: MC4 Ausstattung: 5 St. Kernzug Roboter, Hersteller: Reis, Baujahr: 2015 24- Fach Heisszonenkanalregelung Förderband Schutzzaun

Condition: excellent (used), Year of construction: 2012, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Hodpfxjyak Ecs Agljh Typ: KM420-4300CX Baujahr: 2012 Schließkraft: 420 Tonnen Holmabstand 800 x 800 mm Schnecken DN: 80 mm Max. Hubvolumen: 1.810 cm³ Spritzteilgewicht: 1.647 g/PS Steuerung: MC6 Ausstattung: 2 St. Kernzug Schnittstelle Roboter 12- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ENGEL Typ: ES650H/200W-200HL-2F Baujahr: 2004 Schließkraft: 200 Tonnen Holmabstand Holmlos Einbauhöhe min.: 500 mm Öffnungsweg: 750 mm Schnecken DN 1: 40 mm Max. Hubvolumen: 251 cm³ Spritzteilgewicht in PS: 216 g Schnecke DN 2: 25 mm Max. Hubvolumen: 69 cm³ Spritzteilgewicht in PS: 60 g Hsdpfxjyak A Ie Agljh Steuerung: CC100 Technische Ausstattung: -Roboter Engel, Typ: ERC23/1-E -4 Stück Kernzüge -Drehtischsteuerung