Used Vertical Injection Molding for sale (9,709)

Condition: excellent (used), Year of construction: 2008, Battenfeld HM 100/525 with Battenfeld R10S Robot / Operating Hours: approx. 19,000 in automatic mode Year of manufacture: 2008 Injection Unit: Screw diameter: 40 mm Shot weight: 228.4 g Injection pressure: 2,100 bar Dosage volume: 251 ccm Clamping Unit: Clamping force: 100 t Tie bar spacing: 470x420 mm Pedez Ipi Ejpfx Ab Tegu Platen size: 680x663 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 - touchscreen Additional equipment: Machine in very good technical condition Operating hours: approx. 19,000 in automatic mode Total operating hours: 26,580 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit is wear-resistant and corrosion-resistant Battenfeld R10S Robot Year of manufacture: 2015 5-axis robot: 3 axes powered by servomotors (electric); axis B - pneumatic, axis C Robot with adapter Purchase of robot at extra cost Dimensions: Weight: 4,600 kg Length/Width/Height: 4.23x1.41x2.05 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our premises in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2004, ENGEL DUO 11050/2300 injection molding machine Manufacturer: ENGEL Model: DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 hours Clamping force: 23,000 kN / 2300 tons Screw diameter: 135 mm Injection volume: 8870 cm³ Control system: ENGEL Type: hydraulic, two-platen, large-size injection molding machine CLAMPING UNIT Clamping force: 23,000 kN (2300 tons) Dimensions of mounting plates: 2900 × 2500 mm Column spacing (H × V): 2000 × 1600 mm Minimum mold height: 700 mm Maximum mold height: 1890 mm Maximum distance between plates: 3800 mm Clamping system: hydraulic, two-platen INJECTION UNIT Injection unit: 11050 Screw diameter: 135 mm Injection volume: 8870 cm³ Injection shot weight (PS): 8071 g Maximum injection pressure: 1600 bar Screw replaced in 2011 Reinforced plasticizing unit, adapted for processing special materials ADDITIONAL EQUIPMENT Magnetic mold clamping system – functional 2 hydraulic cores 36 mold heating zones / hot runner channels 10 hydraulic cascades Mold tilting function ENGEL control system Robot: none Psdpfx Ao Af Nkhjb Tjgu MAGNETIC MOLD CLAMPING SYSTEM The injection molding machine is equipped with functional magnetic plates for quick clamping of injection molds. The system reduces machine changeover time and facilitates the exchange of large and heavy molds, making it an important piece of additional equipment for an injection molding machine of this class. TRANSPORT DIMENSIONS AND WEIGHT Weight of main unit: approx. 113,000 kg Weight of control cabinet and additional components: approx. 18,000 kg Total approximate weight: approx. 131,000 kg (131 tons)

Condition: excellent (used), Year of construction: 2018, Bilion H470-200T Select / Electric Injection Molding Machine / Production line with Wittmann W823 robot Year of manufacture: 08.2018 Injection unit: Screw diameter: 38 mm Shot weight: approx. 125 g Injection pressure: 1564 bar Metering volume: 163 ccm Clamping unit: Clamping force: 200 t Tie bar spacing: 610x610 mm Platen size: 870x870 mm Ejector: electric Clamping unit: toggle Controller: Dixit 3 - Touchscreen Additional equipment: Excellent technical condition Electric machine: energy-saving and very quiet Operating hours: h in automatic operation Euromap 67 Robot interface Air valve x 6 Air core pull x 3 Controller with hot runner system Injection unit hardened - bimetal Proportional valve on the injection unit - precise injection Central lubrication Automatic tool height adjustment Parallel movements Wittmann W823 robot Year of manufacture: 2014 4-axis robot: 3 axes are driven by servomotors (electric): X, Y (telescopic), Z; Axis C - pneumatic Travel distances in axes: X-550, Y-1000, Z-2500 Touchscreen control panel Safety package for robot Robot with adapter, conveyor belt, protective housing Purchase of the robot and conveyor belt available for an additional cost Dimensions: Weight: 8700 kg Pgodpfx Asz Ipxgeb Teu Length/Width/Height: 5.90x1.80x2.10 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: good (used), Year of construction: 2008, functionality: fully functional, Ferromatik Milacron K-Tec 250 S, Year of manufacture: 2008, Control system: Moasic Control, Tool opening stroke: 850 mm, Screw diameter: 60 mm, Injection pressure: 2144 bar, Clamping force: 2500 kN, Maximum shot weight: 694 grams, Pgsdpozub Hrsfx Ab Tju Installed heating capacity: 22.7 kW, Hour meter: 5100 hours, Machine weight: 18,000 kg.

Condition: excellent (used), Year of construction: 2014, operating hours: 47,137 h, functionality: fully functional, machine/vehicle number: 61020607, clamping force: 1,300 kN, clearance between the columns: 470 mm, Here we, as dealers in injection moulding machines, offer the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been wholesalers of used injection moulding machines for over 25 years. Important current notice – Tax information and benefit for used machines: From 01.07.2025, used machines will also be eligible for a special tax depreciation of 30% per year. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as for a new machine. Keyword: Growth booster (§ 7 paragraph 2 EStG-E). Manufacturer: Krauss Maffei Model: KM 130 750-130 CXV BluePower 2-color 2-component machine Control system: MC6 Year: 2014 Machine no.: 61020507 Operating hours: 47,137 h Complete maintenance records for the last 7 years / 25,000 operating hours 1st injection unit 750 horizontal Screw diameter: 50 mm Injection volume: 393 ccm Shot weight: 357 g Heating capacity: kW Heating zones: 5 Nozzle stroke: mm Injection pressure: 1,892 bar 2nd injection unit 180 vertical Screw diameter: 30 mm Injection volume: 85 ccm Shot weight: 77 g Injection pressure: 2,500 bar Clamping unit Clamping force: 130 t / 1,300 kN Opening stroke: 600 mm Tie bar spacing: 470 x 470 mm Plate size: 745 x 770 mm Max. daylight: 900 mm Min. mould installation height: 300 mm Ejector stroke: 150 mm / ejector force: 23 kN Dimensions: 4.39 x 1.61 x 4.01 m Weight: 9,000 kg Podpoyf Uy Usfx Ab Tsgu Extras – complete machine data sheet attached as PDF document Nozzle side: Needle shut-off A+C 1 x hydraulic core pull 1 x pneumatic core pull 1 x air blast Ejector side: 1 x hydraulic core pull 3 x pneumatic core pulls 1 x air blast Water BGS: 6 circuits each on nozzle and ejector side BluePower technology: up to 40% energy savings The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Free loaded onto buyer’s truck or delivered free to destination against reimbursement of freight costs. For information about the machines we offer and our company: - We only sell our own machines, purchased from ongoing production, from our warehouse in Hanover - All machines offered are inspected and tested prior to dismantling - We do NOT sell insolvency assets – we are NOT intermediaries trading in third-party property - All machines offered come from successful companies for whom regular maintenance is a given - All offered machines are available for viewing at our warehouse

Condition: excellent (used), Year of construction: 2013, KRAUSSMAFFEI KM 1600-17200 MX Blu Power Injection Molding Machine Pgedpfo Af I U Nsx Ab Teu Year of manufacture: 2013 Clamping force: 16,000 kN (1,600 tons) Control system: KraussMaffei MC6 TECHNICAL SPECIFICATIONS 1. Basic data - Manufacturer: KraussMaffei - Model: KM 1600-17200 MX Blu Power - servo - Year of manufacture: 2013 - Machine type: hydraulic injection molding machine for processing thermoplastic materials - Clamping system: fully hydraulic - Clamping force: 16,000 kN (1,600 tons) - Injection unit: 17200 - Control system: KraussMaffei MC6 2. Clamping unit - Clamping force: 16,000 kN (1,600 tons) - Opening force: 1,120 kN - Dimensions of the mounting plates (H × V): 2,550 × 2,100 mm - Column spacing (H × V): 1,870 × 1,420 mm - Opening stroke: 2,700 mm - Minimum mold height: 700 mm - Maximum mold height: 1,600 mm - Maximum daylight: 3,400 mm - Ejector stroke: 350 mm - Ejector force (forward / backward): 300 / 150 kN 3. Plasticizing unit - Complete plasticizing unit for thermoplastics - Screw diameter: 135 mm - Screw length ratio L/D: 23 - Plasticizing unit in abrasion-resistant version - Screw check valve - Open nozzle 4. Injection unit - Injection unit type: 17200 - Screw diameter: 135 mm - Injection volume: 9,662 cm³ - Injection shot weight (PE): 6,860 g - Maximum injection pressure: 1,784 bar - Nominal screw speed: 81 rpm - Maximum screw speed: 100 rpm 5. Hydraulic and electrical system - Main motor power: 160 kW - Installed heater power: 93 kW - Number of heating zones: 7 - Number of dry cycles according to EUROMAP 6: 648 cycles/h - Hydraulic oil tank capacity: 2,400 l 6. Machine dimensions and weight - Length: 14,170 mm - Width: 4,040 mm - Height: 2,930 mm - Net weight including control cabinet: 92,000 kg (92 tons)

Condition: excellent (used), Year of construction: 2010, Engel Victory 2550/350 Tech with Engel Viper 40 robot Year of manufacture: 2010 Injection unit: Screw diameter: 80 mm Shot weight: approx. 1410 g Injection pressure: 1638 bar Dosing volume: 1558 ccm Clamping unit: Clamping force: 350 t Tie bar spacing: 0x0 mm Platen size: 1200x1100 mm Ejector: hydraulic Clamping unit: hydraulic Control system: CC 200 - Touchscreen Additional equipment: Pjdpfsz Ipvfox Ab Tegu Production line with Engel Viper 40 robot Tie-barless machine Robot interface Air core puller x 4 on the side of the fixed platen Hydraulic core puller x 2 on the side of the moving platen Hydraulic core puller x 1 on the side of the fixed platen Control system with hot runner system x 12 Injection unit is wear-resistant and resistant to corrosion Proportional valve on the injection unit – precise injection Robot Engel Viper 40 Year of manufacture: 2010 6-axis robot: 5 axes are driven by servomotors (electric): X, Y, Z, B (rotation), A; axis C - pneumatic Touch control panel Safety package for robots Robot with adapter, conveyor belt and protective housing Purchase of the robot and conveyor belt available for an additional charge Dimensions: Weight: 25100 kg Length/Width/Height: 7.59x2.18x2.30 m All machines offered are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 180398, clamping force: 1,200 kN, screw diameter: 35 mm, injection weight: 186 g, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire is this high precision Engel Victory VC 500/120 injection moulding machine. This tie bar-less machine is fitted with the Engel Microprocessor controller and 35mm diameter screw, which gives a shot weight of 186 (PS)g. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Pgjdpszx Uc Iefx Ab Tsu Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine Hersteller: NETSTAL Typ: ELION800-270PM Baujahr: 2008 Schließkraft: 80 Tonnen Holmabstand 410 x 410 mm Einbauhöhe min. /max.: 500 mm Öffnungsweg: 350 mm Schnecken DN: 40 mm Podpjwf I Hiefx Ab Tsgu Max. Hubvolumen: 160,8 cm³ Spritzteilgewicht in PS: 154,3 g Kernzüge 2 Stück

Condition: excellent (used), Year of construction: 2007, KRAUSSMAFFEI KM 800-12000 MX Injection Molding Machine - Year of manufacture: 2007 - Machine serial number: 61009705 - Clamping force: 8,000 kN (800 tons) - Machine type: hydraulic, two-platen injection molding machine - Control system: KraussMaffei MC5 2. Clamping System - Clamping system: hydraulic-mechanical, two-platen - Design: 4 pressure pads and 4 locking units on the moving platen - Clamping force: 8,000 kN (800 tons) - Dimensions of mounting platens (H × V): 1,600 × 1,530 mm - Column spacing (H × V): 1,120 × 1,000 mm - Minimum mold height: 500 mm - Maximum mold height: 1,100 mm - Maximum opening stroke: 2,600 mm 3. Plasticizing System - Complete plasticizing system for thermoplastics - Injection unit: 12000 - Screw diameter: 135 mm - Check valve: yes - Nozzle: open - Injection unit adjustment: PV 4. Injection Unit - Screw diameter: 135 mm - Injection volume: 8,588 cm³ - Injection shot weight: 7,815 g - Maximum injection pressure: 1,389 bar 5. Hydraulic and Electrical System - Rated power of pump motor: 132 kW - Heater power: 90 kW - Operating voltage: 380 V - Power supply: three-phase - Frequency: 50 Hz - Rated current of circuit 1: 255 A - Rated current of circuit 2: 318 A - Main fuse for circuit 1: 315 A - Main fuse for circuit 2: 400 A 6. Control System - KraussMaffei MC5 control system - Color operator monitor - Integrated control panel - USB data carrier support Pgjdpfxo Af Ib Uo Ab Teu - Adjustment of injection process parameters 7. Machine Dimensions and Weight - Length: 11,720 mm - Width: 2,920 mm - Height: 2,650 mm - Net weight including control cabinet: approximately 50,000 kg (50 tons)

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 6411, clamping force: 8,000 kN, "IMV Presse HPF-AZ80 Hydraulic Injection Molding Press 800ton with overhead hydraulic tank and robot loading system. Pedpfx Aozhugxjb Tegu

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 200 h, functionality: fully functional, clamping force: 3,500 kN, screw diameter: 60 mm, clearance between the columns: 730 mm, displacement volume: 664 cm³, injection pressure: 151 bar, injection weight: 611 g, ejector force: 99 N, ejector stroke: 200 mm, plate width: 1,060 mm, plate height: 1,060 mm, total length: 8,100 mm, total width: 2,100 mm, total height: 2,100 mm, overall weight: 17,300 kg, heating capacity: 7.1 kW (9.65 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 180 A, warranty duration: 12 months, Equipment: documentation/manual, Base machine: P350H IU1610 D=60 High-performance packaging machine for thin-walled packaging Clamping force: 350 tons Tie bar spacing: 730 x 730 Tool installation height: 350 to 750 Warranty can be optionally extended to 24 or 36 months. Standard options: see brochure Special options: Pjdpfjzz Sikex Ab Togu Germany – CE standard 3 × 400 V + N + PE / 50 Hz Screw diameter: 60 mm, L/D ratio 24:1 Ejector stroke increased to 220 mm Ejector, as well as tool opening and closing, with high-performance proportional valve 1 set of hydraulically synchronized core pull head plate with high-speed proportional valve Linear guides for the clamping unit Servo injection up to 1,000 mm/s Electric plasticizing motor Ceramic heater OPC-UA interface KEBA 2985 control system 2 additional sockets: 1 × 16 A 1 × 32 A Water distributor with 10 inlet and 10 outlet connections for movable and fixed clamping plates Energy meter Electric dosing

Condition: excellent (used), Year of construction: 2013, Arburg 520H 1500-800 e² / Hybrid machine / Production line with the Arburg Multilift H side robot Year of manufacture: 2013 Injection unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1650 bar Dosing volume: 474 ccm Clamping unit: Clamping force: 150 t Tie bar spacing: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping unit: toggle Control system: SELOGICA - Touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Euromap 67 Robot interface Control with air valve Hydraulic core pull x 1 Pgodpfjz Ip Rvex Ab Tju Control with hot runner system x 12 Injection unit hardened - bimetal Main motor of the machine - servo motor driven by inverter - energy saving The injection unit is driven by a servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) Central lubrication Automatic tool height adjustment Kistler sensor - tool pressure control The injection molding machine was operated in a so-called "clean room", has additional protection against contamination and two vapor absorbers Side robot Arburg Multilift H 5-axis robot: Z-axis servo motor driven (electric); X, Y and B axes (rotation) pneumatic Safety package for robots Robot with adapter, conveyor belt with electric height adjustment, protective housing Purchase of the robot and the conveyor belt for an additional charge Dimensions: Weight: 6680 kg Length/Width/Height: 5.03x1.56x2.21 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2003, 1,0 St. gebr. Spritzgießmaschine Hersteller: ENGEL Typ: VICTORY 80/25 TECH Baujahr: 2003 Pedpfx Abjxgi Ets Togu Schließkraft: 25 Tonnen Holmabstand: HOLMLOS Schnecken DN: 22 mm Max. Hubvolumen: 36 ccm³ Spritzteilgewicht 34 g/PS Steuerung: CC100 Ausstattung: -1 x Kernzug -Ausblasventil

Condition: used, functionality: fully functional, Used KraussMaffei injection molding machine KM 65-160 C2, manufactured in 2002, with extensive temperature control and a separate Frigel Microgel process chiller. Manufacturer: KraussMaffei Type: KM 65-160 C2 Machine type: Injection molding machine Year of manufacture: 2002 Machine number: 641741 Order number: 646746/1 Clamping force: 650 kN / 65 t Machine weight: 3,200 kg Operating hours: 91,836:45 h Operating voltage: 400 V Phases: 3 Frequency: 50 Hz Total current: 153 A Motor current: 30 A Main fuse: 160 A Temperature control: Multiple temperature control circuits Part removal: Conveyor belt Process chiller manufacturer: Frigel Firenze S.p.A. Process chiller model: Microgel RCD80/12HP Year of manufacture of process chiller: 2012 Pjdpfx Asz Aln Aob Tsgu Serial number of process chiller: 1205114 Voltage: 400 V Auxiliary voltage: 110 V Frequency: 50 Hz Max. current draw: 29 A Refrigerant: R407C Refrigerant charge: 2.4 kg Max. high pressure: 27 bar Max. low pressure: 19 bar Medium: Water Temperature range: -5 to +90 °C Max. pressure water circuit: 8 bar Weight: 240 kg Available from APRIL 2027

Condition: excellent (used), functionality: fully functional, Manufacturer: KRAUSS MAFFEI Type: KM 420-1900 55 CZ Control system: MC 4 Podpfezypcfsx Ab Tegu Year of manufacture: 2004 Operating hours: 76,000 h Technical data, clamping unit side Clamping force: 4200 kN Tie bar spacing h x v: 800 x 800 mm Platen size h x v: 1270 x 1200 mm Minimum mold height: 380 mm Maximum mold thickness: 1400 mm Opening stroke: 1020 mm Ejector stroke: 250 mm Ejector force: 95 kN Centering of moving platen D: 200 mm Centering of fixed platen D: 200 mm Tool weight: 6700 kg Technical data, injection unit side Screw diameter: 70 mm Injection volume: 1047 ccm Injection pressure: 1778 bar Screw length: 20 l/d Screw speed: 527 rpm Plasticizing rate: 95 g/s PS Free injection rate: 953 g/s PS Number of heating zones: 6 Dimensions & Weight Machine dimensions L x W x H: 9.83m x 2.33m x 2.48m Total weight: 23090 kg Equipment • Screen text in German • Hydraulic core pull, 6x • Machine without handling system • Machine without material hopper • Leveling elements • Tool heating, 16x • Two-component injection molding machine

Condition: excellent (used), Year of construction: 2017, Ferromatik Milacron K-TEC 350-2650 / Production line with Sepro robot Year of manufacture: 2017 Pjdpoz Ipfyjfx Ab Tegu Injection unit: Screw diameter: 70 mm Shot weight: 1,104 g Injection pressure: 2,175 bar Dosage volume: 1,213 cm³ Clamping unit: Clamping force: 350 t Tie bar distance: 750 x 750 mm Platen size: 1,110 x 1,165 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MOSAIC - touchscreen Additional equipment: Very good technical condition High-speed machine Operating hours: approx. 10,000 h (automatic mode) Euromap 67 Robot interface Air valve x 5 Hydraulic core pull x 3 Hot runner control Hardened injection unit - bimetallic Proportional valve on injection unit – precise injection Parallel movements Machine equipped with cylinder / nitrogen accumulator (additional charge for high-speed operation) Energy-efficient machine – features a system with three variable output hydraulic pumps Machine has been regularly serviced by authorized service in Germany Dimensions: Weight: 22,000 kg Length/Width/Height: 8.62 x 2.21 x 2.80 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the selected machine’s technical tests or participate in live technical demonstrations at our premises in Łódź. Price: On request

Year of construction: 2016, condition: ready for operation (used), A fully equipped Arburg injection molding machine including clean air supply Filter Fan Unit and removal robot is available. Clamping force: 1600kN, screw diameter: 45mm, max. cylinder heating: 450°C, total connected load: 85.5kW, machine elevation: 100mm, operating hours: approx. 13361h. Arburg Multilift H: axis: B, Z-axis stroke: 1400mm, conveyor belt length: 2500mm, conveyor belt width: 600mm, deposit height range: 900mm-1300mm, temperature resistance: 160°C. Documentation available. An on-site inspection is possible. Psdpfeyab Nfjx Ab Tegu

Condition: excellent (used), Year of construction: 2007, KraussMaffei KM 950-17200 MX injection molding machine Year of manufacture: 2007 Clamping force increased to 1,000 tons (10,000 kN) TECHNICAL SPECIFICATIONS 1. Clamping unit - Clamping system: fully hydraulic - Clamping force: 10,000 kN (1,000 tons) – increased from the factory standard of 950 tons - Opening force: 665 kN - Column spacing (H × V): 1,400 × 1,150 mm - Dimensions of mounting plates: 1,960 × 1,710 mm - Opening stroke: 1,900 mm - Minimum mold height: 500 mm - Maximum mold height: 1,200 mm Psdpfx Abo Af Hxxo Tjgu - Maximum mold opening: 2,400 mm - Ejector stroke: 300 mm 2. Plasticizing unit - Complete plasticizing unit for thermoplastics - High-performance HPS-UN screw - Screw diameter: 120 mm - Nozzle radius: 30 mm - Nozzle orifice diameter: 12 mm 3. Injection unit - Screw diameter: 120 mm - Injection weight (HDPE): 5,420 g - Injection volume: 7,634 cm³ - Specific injection pressure: 2,257 bar 4. Control system - Control system based on an industrial computer - Integrated operator panel - Color touchscreen 5. Machine dimensions and weight - Length: 12,770 mm - Width: 3,420 mm - Height: 2,750 mm - Total weight: 61,500 kg (61.5 tons)

Condition: excellent (used), Year of construction: 2004, Arburg 320C 500-250 Year of manufacture: 2004 Injection unit: Screw diameter: 35 mm Shot weight: 121 g Injection pressure: 1,820 bar Shot volume: 144 cc Clamping unit: Clamping force: 50 t Tie bar spacing: 320x320 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Euromap 12 Robot interface Air valve x 1 Hydraulic core pull x 1 Injection unit hardened – bimetallic Dimensions: Weight: 2,330 kg Length/Width/Height: 3.41x1.47x1.99 m Pgodpfx Aboz Iqyfe Teu Drive: Pump/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: used, Year of construction: 2011, operating hours: 11,591 h, functionality: fully functional, machine/vehicle number: B610, clamping force: 62 kN, screw diameter: 12 mm, clearance between the columns: 77 mm, displacement volume: 6 cm³, injection pressure: 1,830 bar, mold height (min.): 70 mm, ejector force: 5,000 N, ejector stroke: 45 mm, opening stroke: 110 mm, plate width: 77 mm, plate height: 77 mm, installation height: 180 mm, total length: 1,160 mm, total width: 700 mm, total height: 1,950 mm, overall weight: 150 kg, number of injections: 897,476, power: 3 kW (4.08 HP), type of input current: three-phase, input voltage: 400 V, Equipment: documentation/manual, For sale is a very well-maintained Cronoplast 6/10P injection molding machine from 2011. The machine was operated exclusively by a professional injection molder, regularly serviced, and is in excellent condition. Podpfeytgmvex Ab Tegu Thanks to its extensive additional equipment, this system offers optimal conditions for efficient, precise, and stable production processes. Equipment & Highlights ✔ Selector valve – ensures clean part ejection and optimized part handling ✔ Ceramic heating elements – enable higher processing temperatures and energy-efficient heating ✔ Electric mold heater – provides precise mold temperature control ✔ Stable machine frame – ideal for operation and maintenance ✔ Air blow system – improves part removal and process reliability ✔ Additional sockets – perfect for peripherals and accessories Since you are buying directly from the machine owner, you save on dealer commission costs. We have other machines of this type in stock. The equipment is identical; operating hours may vary. Contact us, and we will offer you an attractive package price. Technical data – Cronoplast 6/10P Screw / Injection unit Technical data - Cronoplast 6/10P Plasticizing unit - Piston diameter 12 mm - Displacement volume 6 cm³ - Specific injection pressure 1830 bar Clamping unit - Clamping force 62.5 kN - Opening force 4 kN - Opening stroke 30-110 mm - Ejection force 5 kN - Ejection stroke 45 mm Dimensions: - Weight including frame approx. 350 kg - L x W x H: 116 cm x 80 cm x 198 cm The sale is made excluding any warranty and liability for defects.

Condition: excellent (used), Year of construction: 2010, Krauss Maffei KM 130-750 CX Year of manufacture: 2010 Injection Unit: Screw diameter: 40 mm Shot weight: 228 g Injection pressure: 2500 bar Dosage volume: 251 cc Clamping Unit: Clamping force: 130 t Tie bar distance: 470x470 mm Platen size: 745x770 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC5 Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Pneumatic core pull x 6 Pedpfx Aboz Iplys Tegu Control system with 18 hot runner zones Injection unit hardened – bimetal Proportional valve on injection unit – accurate injection Dimensions: Weight: 9000 kg Length/Width/Height: 4.90x1.60x2.10 m All machines offered are started up by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: good (used), Year of construction: 2002, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Typ: KM575-1900C2 Baujahr: 2002 Schließkraft: 575 Tonnen Holmabstand 1000 x 1097 mm Schnecken DN: 70 mm Max. Hubvolumen: 1.097 cm³ Spritzteilgewicht: 998 g/PS Steuerung: MC4 Ausstattung: 5 St. Kernzug Roboter, Hersteller: Reis, Baujahr: 2015 24- Fach Heisszonenkanalregelung Förderband Schutzzaun Pgjdpfsyak Htsx Ab Teu

Condition: good (used), Year of construction: 2002, overall weight: 3,200 kg, Krauss Maffei 80-220 C1 injection molding machine 80 tons Year 2002 Pedpfx Asz Dquzeb Tsgu

Condition: excellent (used), Year of construction: 2008, Arburg 630S 2500-1300 ECO / Production Line with Sepro Industrial Robot SDR 22S Year of manufacture: 2008 Injection Unit: Screw diameter: 55 mm Shot weight: 521 g Injection pressure: 2380 bar Dosage volume: 570 ccm Clamping Unit: Clamping force: 250 t Tie bar distance: 630x630 mm Platen size: 900x900 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface Air valves x 4 Hydraulic core pulls x 2 Controller with 15 hot runner zones Injection assembly hardened - bimetallic Machine with cylinder / battery with compressed nitrogen (additional charge for fast operation) ECO – machine equipped with a system to adjust the minimal mould height Robot - Sepro Industrial Robot SDR 22S Year of manufacture: 2016 4-axis robot: 3 axes driven by servomotors (electric); C-axis - pneumatic Axis strokes: X-1500, Y-2200, Z-800 Vacuum x 2 Gripper x 2 Touch control panel Robot with adapter, conveyor belt and protective housing Acquisition of the robot and the conveyor belt available at extra cost Dimensions: Weight: 12,510 kg Length/Width/Height: 6.57x1.76x2.46 m Pgodpfxez Iqa Ss Ab Tsu All offered machines are commissioned by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine or to participate in live technical tests at our company in Łódź. Price: On request