Used Vertical Borer for sale (7,213)

Condition: used, WEBSTER & BENNETT EV 36” HIGH SPEED VERTICAL BORER MAKE WEBSTER & BENNETT, MADE IN ENGLAND MODEL EV 36” TABLE DIA 915 mm SWING 1168 mm HEIGHT UNDER RAIL 533 - 1016 mm SPEED 13.5 - 300 rpm FEED RATE 0.005-0.250 inch/min MAIN SPEED 40 HP PLUS HIGH SPEED TAABLE EV SERIES MACHINE ELEVATING RAIL SAFETY GAURDING SET OF JAWS FULLY FUNCTIONAL Bwedpfx Akjxp Na Njxjl GOOD SLIDES

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel Bwjdpeyug R Rofx Akxsl has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Bwedpfx Aoyug Hxjkxol Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: new, functionality: fully functional, power: 250 kW (339.91 HP), fuel type: electric, color: other, overall weight: 19,000 kg, Year of construction: 2026, These high-speed crushers are manufactured in two different combinations as open rotor and closed rotor. Vertical shaft impact crushers (VSI) are designed with a unique rock-on-rock crushing principle, which significantly reduces the wear costs while offering superior cubical shape for the best quality fine aggregate production. The fact that it reduces their service requirements and times, and to increase their crushing performance with their low investment costs. VSI-1000 technical specifications: Model: VSI-1000 OR Capacity: 150-400 T/H Rotor Size: Ø 1000mm Maximum Feeding: 100mm Motor Power: 2 x 200-250 kW Bjdjy Atc Rspfx Akxswl Speed: 50 – 70 ms Weight: 19000 kg General Specifications and Features: – Fine product, low wear cost, cubic shape, application flexibility and maintainability. – Rotor and crushing chute with stress relieved welding – Inner surfaces of the crusher is coated with wear resistant lining plates – Hydraulic opening cap – Automatic lubrication system

Condition: used, functionality: unexamined, total height: 5,000 mm, total width: 1,200 mm, total length: 3,600 mm, input voltage: 400 V, input frequency: 50 Hz, DenoLift Vertical Carousel / Paternoster approx. 5 m – Fully Functional – Industrial We have a used DenoLift carousel (paternoster) that we are considering selling and would like to know if this system might be of interest to you. Bwodjyplqrepfx Akxel Specifications (indicative): Brand: DenoLift (Denocard) Type: vertical carousel / paternoster Dimensions: approx. 3.6 meters long × 1.2 meters wide Height: approx. 4 – 5.5 meters Control: numeric keypad with LED display (older model) Price: 5000 EUR This is an industrial storage system with significant capacity. The installation is currently set up and can be dismantled and collected by arrangement. Upon request, we can provide additional photos, a video of the system in operation, and any available technical data.

Condition: excellent (used), Horizontal/vertical rotary table Chuck: Ø 350 mm Shelf diameter: Ø 400 mm Bsdeyr Numopfx Akxewl Height without mandrel: 140 mm Total height: 250 mm Base dimensions: Length 430 mm x Depth 370 mm Weight: approx 150 kg Possibility to work horizontally or vertically The increment is done by the front handle

Condition: new, Year of construction: 2025, table length: 900 mm, table width: 450 mm, number of spindles: 1, spindle speed (min.): 8,000 rpm, table load: 500 kg, VMC 650 CNC machining center, milling machine with CNC system VMC 650 machining center is a multifunctional equipment that allows you to perform milling, drilling, thread cutting, and turning operations in automatic mode (if these options are available in the machine). The VMC 650 milling machine can have 16- or 24-position tool magazine. Depending on the customer's wishes, the milling machine can be equipped with a GSK, Siemens or Fanuc CNC system. It is possible to optionally add a Y-axis drive. As a very convenient additional option, we recommend installing a chip conveyor that will save you time when working with the equipment. Technical parameters: Worktable size 900x450mm Maximum workpiece weight 500 kg Movement along the axes X/Y/Z 800/450/500 mm Maximum distance from the spindle to the table surface 120-620 mm Bwsdpfx Akexc I Dgjxjl Motor power 5.5-7.5 kW Maximum spindle speed 8000 rpm Spindle type BT40 Positioning accuracy ±0.008/300 mm Repeatability ±0.005 mm Machine dimensions 300022752550 mm Machine weight 4000 kg It is also possible to supply CNC milling machines, machining centers with other table sizes: VMC 850 table 1000x500 mm VMC 855 table 1000x550 mm VMC 1060 table 1200x600 mm VMC 1160 table 1200x600 mm VMC 1275 table 1300x700 mm VMC 1370 table 1400x700 mm VMC 1580 table 1600x800 mm VMC 1680 table 1700x800 mm VMC 1890 table 2000x900 mm

Condition: good (used), Year of construction: 2012, functionality: fully functional, Schiess CNC vertical lathe with C axis, year 1992, retrofitted in 2012 CNC: NUM 1060 FLEXIUM 2 tables, table diameter 2000mm – max turning diameter 2500mm – max table speed 201 rpm – table power 56 KW Load capacity (table included): 16,000kg Movable crossrail with 12 positions, 50mm pitch Available space under spindle nose: min. 795mm, max. 1345mm RAM Z stroke: 1000mm C axis with 360,000 positions – milling spindle max speed 1600 rpm – milling spindle power 22KW – 2 gear ranges Tool magazine: 20 turning tool positions, 35 milling tool positions 1 milling head WIDAFLEX UTS80 1 milling head ISO 50 Renishaw MP60 touch probe (for parts) Tool presetter – Transmit function: G20 / G21 – No rigid tapping Chip conveyor Bwsdpjxpqm Rjfx Akxol Front door: partial opening M0 / full opening

Condition: like new (used), 30m3 insulated stainless steel tank Dim. 3.40x 6.80. 12 cm insulation, insulated with wool and metal sheet Bwjdshr Rp Sepfx Akxol lower bottom insulated with polyurethane foam. We offer transport with our own semi-trailer.

Condition: excellent (used), Velo Kieselgur filter vertical 10 m2 used in beverage industry, in very good condition. Complete with wiring and control desk. Bodpsq U A Hujfx Akxjwl

Condition: new, functionality: fully functional, power: 400 kW (543.85 HP), fuel type: electric, color: dark red, overall weight: 38,000 kg, axle configuration: 2 axles, brakes: other, Year of construction: 2026, Mobile vertical shaft crusher is a specially designed mobile stone crushing screening plant on a portable double axle chassis, consisting of feeder bunker, VSI 900 Vertical shaft impact crusher, vibrating screen and conveyor belts. It can be fed directly with the material in stream areas or it can produce sand and gravel from the sieve material in the crushing plants. The GNR - MVSI 900 Vertical Shaft Crusher that gives this facility its name; - Maximum feeding size 50-55 mm - Rotor size 900 mm - Engine power 2x200 kW - The capacity 80-210 tons per hour. For more information please call us. Bwjdswnp Akspfx Akxjl

Condition: ready for operation (used), Year of construction: 2013, operating hours: 13,672 h, functionality: fully functional, machine/vehicle number: 1237361A51A, travel distance X-axis: 610 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 570 mm, controller model: Fanuc 0-MD, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel X-axis: 610 mm Travel Y-axis: 430 mm Travel Z-axis: 570 mm Table length: 650 mm Table width: 450 mm Tool holder: BT40 Main spindle power: 15 kW Max. spindle speed: 10,000 rpm Number of axes: 3 MACHINE DETAILS Control: Fanuc 0-MD Tool magazine: 24 positions Dimensions & Weight Dimensions (L x W x H): 5,000 x 2,200 x 2,450 mm Net weight: 9,000 kg Shipping units: 2 Operating hours: 13,672 h Power consumption: 11 kW EQUIPMENT External cooling system Chip conveyor Pallet milling machine Spindle cooling Changeover table Tool magazine Bedpey Avucefx Akxewl Note: The robot shown in the video is not included in the scope of delivery or sale.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: M242-06206013CFA, travel distance X-axis: 610 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, table width: 510 mm, table length: 760 mm, TECHNICAL DETAILS Travel X-Axis: 610 mm Travel Y-Axis: 508 mm Travel Z-Axis: 610 mm Spindle Nose to Table: 152 - 762 mm Table Clamping Surface: 760 x 510 mm Bsdpsy Dglnjfx Akxewl T-Slots (DIN 650): 5 x 18 H8 x 100 Table Load Capacity (evenly distributed): 1,500 kg MACHINE DETAILS AC Voltage: 400 V Phases: 3 Frequency: 50 Hz Connected Load: 18 kVA Largest Motor: 7.5 kVA

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, table load: 1,360 kg, spindle speed (max.): 12,000 rpm, Increased sales pressure – therefore no minimum price & guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-Axis: 1,016 mm Bwjdoy A Ip Sjpfx Akxel Travel Y-Axis: 660 mm Travel Z-Axis: 635 mm Maximum spindle speed: 12,000 rpm Spindle power: 22.4 kW Table size: 1,372 x 610 mm Maximum table load: 1,360 kg Feed rate X-Axis: 30 m/min Feed rate Y-Axis: 30 m/min Feed rate Z-Axis: 30 m/min MACHINE DETAILS Operating time: 6,854 h Spindle running time: 1,747 h Control: HAAS CNC control Tool changer: 20 + 1 positions Tool taper: SK40 EQUIPMENT Documentation/Manual Chip conveyor Tool changer Coolant system Work area lighting Electronic handwheel Network / USB interface

Condition: ready for operation (used), Year of construction: 2010, operating hours: 47,512 h, functionality: fully functional, travel distance X-axis: 2,230 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 850 mm, controller model: HEIDENHAIN iTNC 435, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS X-axis travel: 2,230 mm Y-axis travel: 1,400 mm Bjdpfjy Dgy Ejx Akxjwl Z-axis travel: 850 mm Table dimensions: 2,000 mm × 1,250 mm Maximum table load: 6,000 kg Spindle speed: 6,000 rpm Tool holder: SK50 Tool magazine capacity: 40 positions Rapid traverse in X / Y / Z directions: 12 m/min MACHINE DETAILS Control model: HEIDENHAIN iTNC 435 Spindle drive power: 38 kW Dimensions & Weight Dimensions (L × W × H): 6,135 mm × 4,338 mm × 4,150 mm Machine weight: 22,000 kg Operating hours (machine): 72,846 h Operating hours (program run): 48,891 h Operating hours (spindle running time): 47,512 h EQUIPMENT Coolant system Internal coolant supply (IKZ) Electronic handwheel Touch probe Automatic workpiece measurement Chip flushing Chip conveyor

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 550 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 10,000 rpm, The machine spindle was replaced in 2022! TECHNICAL DETAILS Traverse path X-axis: 800 mm Traverse path Y-axis: 520 mm Traverse path Z-axis: 550 mm Spindle type: SK40 Spindle speed: 10,000 rpm Tool changer: 24-position Table size: 950 x 520 mm MACHINE DETAILS Bjdpfey E Hqtox Akxewl Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (LxWxH): approx. 2.60 x 2.60 x 2.70 m Weight: 6,800 kg Operating Hours Machine on-time: approx. 47,000 h Program run time: approx. 5,700 h Spindle: approx. 4,800 h EQUIPMENT IKZ (internal coolant supply) Hexagon probe Note: NC clamps and tool holders are not included in the offer.

Condition: defective spare-parts repository (used), Year of construction: 2005, operating hours: 38,534 h, functionality: not functional, machine/vehicle number: 29310001024, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 560 mm, controller model: Heidenhain iTNC530, rotational speed (max.): 18,000 rpm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel X-axis: 750 mm Travel Y-axis: 600 mm Travel Z-axis: 560 mm Worktable size: 950 x 650 mm Table load: 1,000 kg Spindle speed: 18,000 rpm Number of axes: 3 Tool changer: 30 positions Tool holder: HSK63 MACHINE DETAILS Bodpfey Ib H Ijx Akxjwl CNC control: Heidenhain iTNC530 Dimensions & Weight Dimensions (L x W x H): 3,500 x 3,000 x 3,200 mm Transport dimensions (L x W x H): 3,500 x 3,000 x 3,200 mm Weight: 10.2 t Operating hours Spindle hours: 38,534 h Operating hours: 98,381 h Note: DMG has measured the clamping force on the machine, which is so low that there is a risk of the tool falling out. The machine has suffered spindle damage. There are various leaks, for example at the chip conveyor or in the door area.

Condition: defective spare-parts repository (used), Year of construction: 2003, operating hours: 30,434 h, functionality: not functional, machine/vehicle number: 1114 000402 3, travel distance X-axis: 1,060 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: Heidenhain iTNC530, rotational speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 1,060 mm Y-axis travel: 710 mm Z-axis travel: 710 mm Working area: Ø800 NC rotary table Spindle speed: 10,000 rpm Number of axes: 5 Tool changer: 30 stations Tool holder: HSK63 MACHINE DETAILS Control: iTNC530 Dimensions & Weight Bwodpey Ib A Nofx Akxsl Machine dimensions (L x W x H): 4,080 x 4,490 x 3,117.5 mm Transport dimensions (L x W x H): 3,500 x 2,500 x 2,410 mm Weight: 9.7 t Operating hours Spindle hours: 30,434 h Operating hours: 66,001 h Note: The machine temperature rises immediately, and in the past there has even been smoke. The machine has spindle damage. Various cable insulations are worn.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 6,023 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, spindle speed (max.): 8,000 rpm, number of axes: 4, TECHNICAL DETAILS Bedpfx Akjy Hh Iioxswl Travel X-axis: 1,020 mm Travel Y-axis: 510 mm Travel Z-axis: 510 mm Table length: 1,150 mm Table width: 500 mm Tool holder: BT40 Main spindle power: 11 kW Max. spindle speed: 8,000 rpm MACHINE DETAILS Control: CNC Number of axes: 4 Power: 15 kW Dimensions & Weight Dimensions (L x W x H): 3,500 x 2,000 x 2,500 mm Net weight: 5,000 kg Transport packages: 1 Operating hours: 6,023 h EQUIPMENT Chip conveyor External cooling Tool magazine

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,790 h, functionality: fully functional, travel distance X-axis: 2,032 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, table load: 3,000 kg, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel X-Axis: 2,032 mm Travel Y-Axis: 750 mm Travel Z-Axis: 750 mm Max. workpiece height: 870 mm Max. table/workpiece load: 3,000 kg Table width: 800 mm Table length: 2,240 mm Spindle speed: 40 – 6,000 rpm Spindle taper: SK 50 Standard spindle power: 18.5 kW Standard torque: 759 Nm Increased spindle power: 26 kW Increased torque: 1,067 Nm MACHINE DETAILS Control system: MAZATROL Dimensions & Weight Dimensions (L x W x H): 5,685 mm x 4,096 mm Weight: 14,000 kg Operating hours: 32,790 h EQUIPMENT Bsdsy Hkhrjpfx Akxswl Measuring probe (manufacturer: Renishaw) Chip cart 47 SK50 tool holders, including approximately 25 Weldon holders Emulsion cleaning unit

Condition: used, machine/vehicle number: 006488, X axis working area: 2500 mm Y axis working area: 850 mm Main Electrospindle power: 5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 11 Bjdpfxswuclxs Akxowl

Condition: used, machine/vehicle number: 008255, X axis working area: 3050 mm Y axis working area: 850 mm Bsdpfxox A Td Ee Akxewl Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 19 Total number of tool changer positions: 4

Condition: used, Year of construction: 2021, EMAG VMC 450 MT Mfd. 2021 Control: Siemens 840D SL Machine has no production hours Description CHUCK DIAMETER: 24" MAX WEIGHT: 1100 LBS. MAX SWING DIAMETER: 31" Bjdpfoyzkdvsx Akxewl MAX TURNING DIAMETER: 23.5" X STROKE: 30" Z STROKE: 19" MAIN DRIVE: POWER: 100 HP FULL POWER AT 800 RPM MAX SPINDLE RPM: 2,000 C AXIS POSITIONIONG TO .01MM ANGULAR DEGREES FEED DRIVE: RAPIDS Z / Z: 60 / 30 M / MIN. FEED FORCE X / Z 4 / 15 kN BALL SCREW DIAMETER X / Z: 40 / 50 MM MILLING SPINDLE: POWER: 100 HP MAX SPINDLE SPEED: 7000 RPM SPINDLE TAPER: CAPTO C8 TOOL MAGAZINE: 60 EQUIPPED WITH: MINERALIT MACHINE BED SIEMENS 840 D SL FULL ENCLOSURE LEVEL PADS TURN MILL DRIVE EMAG WORKPIECE CORRECTION SYSTEM EMAG OPERATING AND SETTINGS MASKS EMAG REMOTE DIAGNOSIS Y AXIS B AXIS +/- 95 DEGREE 1000 PSI COOLANT THROUGH TOOL X-AXI CLAMPING FOR GEAR TOOTH FORMING SWARF CONVEYOR, CHAIN TYPE - REAR DISCHARGE LIFTING PUMP PAPER FILTER LOW PRESSURE COOLANT HIGHT PRESSURE COOLANT 1000 PSI PROGRAMMABLE COOLANT PRESSURE COOLANT MIST EXTRACTOR AIR BLAST CHIP FLUSH QUALITY CONTROL: WIRELESS GAUGING CALIBRATION BLK FOR PROBE TOOL GAUGING - BLUM LASER

Condition: used, Spinner MICROTURN 52 LTBS Sub-Micron Turn Mill Center with Y / B-Axis and Twin Spindles AUTOMATION READY - MC0122 Less than 300 hours No bar feed Tools and probes included—for all 3 spindles? BMT 45 Probe would stay. No tooling Chucks etc. included Yes Coolant: used Water Based What kind of facility is it in? R and D for performance parts for injector and turbos Specifications Work Area: Swing Diameter: 23.9 in (608 mm) Turning Diameter (max): 5.9 in (150 mm) Turning Length(max): 9.8 in (250 mm) Travels: X: 23.6 in (600 mm) Z:13.8 in (350 mm) Y1 Turret: +/- 1.9 in (50 mm) Y2 Milling Spindle: +/- 1.9 in (50 mm) B Rotary: 180 degrees Feedrate: Rapid Traverse X: 944.8 ipm (24 m/min) Rapid Traverse Y: 590.6 ipm (15 m/min) Rapid Traverse Z: 944.8 ipm (24 m/min) Spindle #1 Left / #2 Right: Liquid cooled motorized spindle with C-axis servo drive and encoder for synchronous machining. Spindle Bore Capacity: 52mm (2.0 in) Speed: 5,200 rpm Performance (S6 40%): 22.1 hp (16.5 kW) Torque (S6 40%): 81.1 ft-lb (110 Nm) Spindle Nose: DIN 55026-A6 B-Axis Milling Spindle: Speed (max): 12,000 rpm Performance (S6 40%): 12 hp (9 Kw) Torque (S6 40%): 15.4 ft-lbs (21 Nm) Swivel Angle: +/- 180 degrees Positional Measurement: Rotary Encoder Clamping: Hydraulic Turret: Stations: 12 / BMT45 Live Tooling Speed: 8,000 rpm Performance (S3 25%): 5.8 hp (4.3 kW) Torque (S3 25%): 10 ft-lb (13.6 Nm) Tool Magazine: Station Quantity: 72 Holder Type: HSK40 Tool Length (max): 4.1 in (105 mm) Tool Diameter (max): 3.5 in (88 mm) Tool Diameter (max) - Adj Pocket Empty: 3.9 in (100 mm) Size & Electrical: Technical design according to CE standards. Machine Dimensions: 119.3 in (3030 mm) x 111.8 in (2840 mm) x 113.8 in (2890 mm) Machine Weight: 16,976 lbs (7,700 kg) Operating Voltage: 3 x 400V (+/-10%) Main Frequency: 60 Hz (+/- 2%) Electrical connection: TN network (5-wire) Standard Equipment • 72-station tool magazine mounted on top of the machine • Hydraulic spindle brake on spindle 1 • Hydraulic spindle brake on spindle 2 • Spindle rinsing on spindle 1 (switchable between coolant or compressed air) • Spindle rinsing on spindle 2 (switchable between coolant or compressed air) • CNC Clamping Force Setting on Spindle 1 - recommended for convenient setting of clamping force from the CNC program, or on the screen. • CNC Clamping Force Setting on Spindle 2 - recommended for convenient setting of clamping force from the CNC program, or on the screen. • Linear tool slide with coolant supply • Signal lamp • Rear exit chip conveyor - includes feed pump rated at 5 bar at 20l/min or 3.7 bar at 83l/min • High pressure coolant system with additional 61 gallon (230 liter) tank. Maximum 319 psi (22 bar) • Renishaw tool probe for measuring tools in the X/Y/Z axis • Preparation for mist collector unit • Automatic operator door that opens at the end of the program and closes with the start. Includes necessary safety technology. Suitable for manual loading or automation access. • UNIROB universal robot interface via a common plug on the machine control cabinet with the following signals: • Safety signals (emergency stop/door signals, etc.) • Standard signals via Profinet PN bus coupler on RJ45 module. Otherwise according to the Unirob-V2021 functional description CNC Control System Bsdpfx Aksyzkdcexswl

Year of construction: 1978, condition: good (used), U.S. MODEL 50TX120 VERTICAL PULL DOWN BROACH Equipped with: Retriever Puller Bsdportrzlsfx Akxswl Hydraulic System Coolant System Chiller Chip Conveyor Manuals Specifications: Normal Broaching Capacity: 100,000 Lbs at 922 PSI Peak Force Capacity: 133,600 Lbs at 1350 PSI Main Slide Stroke (Bump Inches): 106 Maximum Cutting Speed: 20 Ft/Min. Maximum Return Speed: 40 Ft/Min. Main Pump Motor: 75 HP at 900 RPM Hydraulic Reservoir: 365 Gallons Handling Pump Motor: 10 HP at 1200 RPM Coolant Pump Motor: 1.5 HP at 1800 RPM Coolant Pump Capacity: 100 Gallons / Min at 23 Head Ft. Coolant Reservoir Capacity: 600 Gallons Approx. Floor Space ( Width x Depth x Height): 65" x 96" x 243" Net Weight, Approximate: 79,000 #