Used Vertical Injection Molding for sale (9,678)

Condition: new, Engel bimetallic screw cylinder, new and unused Diameter: 105 mm LD 22 Unit 4550: 3380 cm3 Unit 5550: 3700 cm3 Csdox Up U Tspfx Afxerg

Condition: like new (used), Year of construction: 2023, INJECTION MOLDING MACHINE Arburg ALLROUNDER 1300 T 1000 – 170 Year of manufacture: 2023 Technical Specifications Clamping Unit: Clamping force: 1000 kN – ensures high process stability Rotary table diameter: 1300 mm – optimizes production cycle Usable mold mounting area: 800 × 590 mm Minimum mold height: 300 mm Maximum daylight between platens: 585 mm Injection Unit (3 interchangeable cylinders): Cylinder Ø 30 mm: 83 cm³ at 2200 bar Cylinder Ø 40 mm: 140 cm³ at 1250 bar Cylinder Ø 20 mm: 36 cm³ at 2500 bar Additional equipment: - 2 hydraulic cores – for operating complex molds - 2 pneumatic valves – for additional mold functionalities - GK control – enables direct control of 3 heating zones from the machine - SELOGICA DIRECT control system – precise process control, capability for custom sequence programming Codpfx Afoxzklqoxerg Year of manufacture: 08/2023 Pump operating hours: 1062 h Detailed Description The machine is fitted with a hydraulic system featuring two energy-efficient variable displacement pumps and a servo valve for precise pressure and movement control. The hydraulic power unit is mounted outside the injection molding machine’s frame, significantly reducing operational noise. Thanks to precision filters and low oil volume, the oil change interval is extended to 20,000 hours. T2 servo-regulation technology includes: - Two adjustable variable delivery pumps - Programmable, adjustable, and stabilized clamping force - Programmable and manually adjustable nozzle contact force - Capability for simultaneous (parallel) movements (nozzle, ejector, cores) The machine is also equipped with: - Additional continuous oil filtration and cooling system (bypass circuit) - AES system – automatic optimization of main drive operation, reducing energy consumption by smoothly adjusting pump speed according to machine load (for 15–75 kW motors, 380–480V, 50–60 Hz). Required option: 525/02 – adjustable machine cooling circuits Tool plates are equipped with a central injection position and a Ø 125 mm centering hole.

Condition: new, Year of construction: 2005, screw size 60 mm injection shot weight in Polysterol 607 g/PS closing pressure 3200 kN Control SELOGICA mould space 300 mm clamping plate 1040 x 1040 mm opening stroke 700 mm total power requirement 96 kW weight of the machine ca. 17 t dimensions of the machine ca. 7 x 2.2 x 2.3 m This plastic injection moulding machine is in very good condition, can be inspected by can be inspected at the seller's premises by prior arrangement and is supplied incl. Multilift H. Cjdpfxjvkqfaj Afxerg Operating hours: 42878h

Condition: excellent (used), Year of construction: 2013, KRAUSS-MAFFEI KM 550-4300 GX injection molding machine Year of manufacture: 2013 Control system: MC6 Clamping system: hydraulic-mechanical, two-platen Injection unit: 4300 Design and control Hydraulic-mechanical two-platen clamping system with 4 pressure pads on the fixed platen and 4 adjustment units on the moving platen. PV – injection unit adjustment. MC6 control system with a color TFT monitor, integrated control panel, and USB data storage. Plasticizing unit Complete plasticizing unit for thermoplastics with abrasion protection. Screw diameter: 90 mm Backflow valve: yes Nozzle: open Clamping unit Clamping force: 5500 kN / 550 t Mold opening force – pressure pads: 385 kN Platen dimensions (H × V): 1430 × 1350 mm Distance between columns (H × V): 1040 × 910 mm Maximum mold opening stroke: 1350 mm Minimum/maximum mold height: 400–950 mm Maximum distance between platens: 1750 mm Ejector stroke: 250 mm Ejector force front / rear: 95 / 49 kN Injection unit 4300 Screw diameter: 90 mm Codpfx Afozvm Dlexjrg Ls/D ratio: 20:1 Maximum injection pressure: 1839 bar Injection volume: 2290 cm³ Injection weight for PS: 2084 g Injection rate: 636 cm³/s Screw speed: 195 rpm Nozzle clamping force: 129 kN Electrical and hydraulic equipment Rated motor power: 90 kW Installed heater power: 44 kW Number of cylinder heating zones: 7 Dry cycle time / stroke according to EUROMAP 6: 2.8 s / 728 mm Dry cycle time / stroke according to KraussMaffei standards: 2.5 s / 520 mm Oil tank capacity: 1180 l Dimensions and weight Machine dimensions (L × W × H): 8.08 × 2.80 × 2.39 m Net weight with control cabinet: 25.0 t

Condition: used, Year of construction: 2011, Various hot runner controllers, some with Harding connectors and cables. Some of the devices originate from a cleanroom environment in the medical technology sector. Csdpfx Ajwqmqwjfxsrg

Condition: used, Injection molding machine ARBURG, type Allrounder 221 M 350-75 Serial No. 163646, Year of manufacture 1995 Clamping force 35 tons (350 kN) Screw diameter, presumably Ø 25 mm Platen size 342 x 250 mm Mold size, max. 221 mm Mold mounting height 150 to 300 mm Column spacing 221 mm (center distance) Opening stroke - platen stroke, max. 200 mm Ejector stroke 60 mm Ejector force 27 kN Hydraulic oil tank capacity 120 liters (delivery without oil) Heating capacity 4 kW Motor power, hydraulic pump 7.5 kW Power supply 400 volts, 50 Hz, 12 kW - ARBURG MULTRONICA control system with foil keyboard and screen - Stainless steel granulate hopper, 50 liters, on the injection unit - Adjacent control cabinet Space requirement without transport pallet, L x W x H 2750 x 1350 x 1850 mm Csdpfx Afszx Etwexorg Transport dimensions on pallet, L x W x H 2750 x 1700 x 1900 mm Weight approx. 1300 kg Good condition

Condition: excellent (used), Year of construction: 2005, Arburg 1200T 800-150 / Vertical Injection Molding Machine with Rotary Table Year of Manufacture: 2005 Injection Unit: Screw Diameter: 25 mm Injection Weight: 45 g Injection Pressure: 2500 bar Dosing Volume: 54 cc Clamping Unit: Clamping Force: 80 t Tiebar Distance: 0 x 0 mm Clamping Platen Size: 1200 mm Ejector: Hydraulic Clamping Unit: Hydraulic Control System: SELOGICA Additional Equipment: Air Valves x 6 Hydraulic Core Pullers x 6 Control System with Hot Runners Injection Unit Hardened - Bimetal Rotary Table Diameter: 1200 mm Kistler Sensor - Mold Pressure Control Machine serviced by the authorized Arburg Service Center in Germany Crsdozc Nqcopfx Afxsg Dimensions: Weight: 7400 kg Length/Width/Height: 3.92 x 1.61 x 3.78 m Drive: Pump/Motor: 22 kW Heating power: 9.4 kW Total power: 31.4 kW All offered machines are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Year of construction: 2009, condition: ready for operation (used), Two injection molding machines are offered, year of manufacture 2008 and 2009. Clamping force: 500kN, tie bar spacing X/Y: 320mm/320mm, mold mounting plates X/Y: 446mm/446mm, opening stroke: 350mm, max. platen distance: 550mm, injection unit 170: screw diameter: 25mm-30mm, shot volume: approx. 59ccm/25mm screw, approx. 85ccm/30mm screw, shot weight: approx. 62g to 77g, injection pressure: up to 2500bar. Inspection is possible by arrangement. Credpfox I Rqcjx Afxog

Condition: excellent (used), Year of construction: 2018, Krauss Maffei KM 200-1400 CX with Krauss Maffei LRX Easy Control 100 Robot / Operating hours: 12,000 h in automatic mode Year of manufacture: 2018 Injection Unit: Screw diameter: 60 mm Shot weight: 617 g Injection pressure: 2007 bar Dosage volume: 679 ccm Clamping Unit: Clamping force: 200 t Tie bar distance: 560x560 mm Platen size: 915x915 mm Ejector: hydraulic Clamping unit: hydraulic Control system: MC6 – touchscreen Additional equipment: Very good technical condition Credpfx Afszc Nwvoxjg Operating hours: 12,000 h in automatic mode Euromap 67 Robot interface Air valve with vacuum measurement x 1 Hydraulic core pull x 3 Pneumatic core pull x 3 Control system for hot runner zones x 10 Hardened injection unit – bimetallic Energy-efficient machine – features a system with 3 variable displacement hydraulic pumps Parallel movements Proportional valve on injection unit – precise injection Machine manufactured in December 2018, delivered to customer in 2019 Krauss Maffei LRX Easy Control 100 Robot Year of manufacture: 2019 4-axis robot: 3 axes driven by servo motors (electric); axis C – pneumatic Touch control panel Safety package for robot Robot with interface, conveyor belt, and safety enclosure Purchase of robot and conveyor belt at additional cost Dimensions: Weight: 11,500 kg Length/Width/Height: 6.10x2.20x2.30 m All machines offered are started up by our service technicians before sale. It is possible to receive a video of the technical tests for the selected machine, or to participate in live technical demonstrations at our premises in Łódź. Price: Upon request

Condition: reconditioned (used), Year of construction: 2001, machine/vehicle number: 186931, clamping force: 600 kN, screw diameter: 35 mm, injection pressure: 1,820 bar, injection weight: 132 g, total length: 3,665 mm, total width: 1,485 mm, total height: 1,990 mm, overall weight: 2,330 kg, pressure: 1,820 bar, warranty duration: 6 months, Awaiting refurbishment at our headquarters in Northamptonshire is this Arburg 320C 600-250U injection moulding machine. Cjdozk D Dxjpfx Afxsrg Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: unknown, type of input current: AC, nominal power: 100 kW (135.96 HP), Machine data: Machine type: Rubber - Injection molding machine Manufacturer: “RUTIL” (Italy) Type: RS “6300.600” First assembly and trial work performed in Dimitrovgrad (Ex Yugoslavia), in late 90s. Condition: Operational Note: Since the commissioning, the machine has not been used. Technical details: Codszupp Iepfx Afxjrg Input voltage: 380V Frequency: 50Hz Power: 100kVa Filling volume: 8l

Condition: excellent (used), Year of construction: 2010, clamping force: 1,000 kN, screw diameter: 45 mm, clearance between the columns: 470 mm, injection pressure: 1,580 bar, injection weight: 232 g, mold height (min.): 250 mm, Clamping unit • Clamping force 1000 kN (100 t) • Set of mounting plates, central mounting, 125 mm bore • Electromechanical ejector • Quick-release coupling for the ejector • Connection safeguard for the ejector plates • Programmable mold height adjustment from the operator panel • Top-open guard with a drop-down window for the parts removal device Injection unit • Complete 45 mm screw with high wear resistance • Open nozzle 45 mm, nozzle tip with a 15 mm radius, heating band for open nozzle • Nozzle clamping force adjustable and programmable • AED - electromechanical dosing drive • aXw Control ScrewPilot Drive system - HIDRIVE hybrid • H series: hybrid concept combining electric drives with accumulator hydraulics • Drive unit with 11 kW motor, 21.4 l/min charging capacity • Technology level: accumulator drive – fast movements with low power consumption • Continuous oil cooling and filtration • Hydraulic accumulator tested during start-up Csdpfozxg Txsx Afxerg Control system • Selogica direct with touchscreen • Complete set of six software packages: extended monitoring, extended movements, production control, optimization and operator assistance, quality assurance, documentation • Printer interface, serial USB • CompactFlash interface for saving data sets • Operator authorization via chip card according to EUROMAP 65 Hydraulic cores • Core 1 – simultaneous movement, P/Q regulation, programmable • Core 2 – simultaneous movement, P/Q regulation, programmable • Both circuits are fully integrated with the Selogica cycle sequence and controlled directly from the panel • Note regarding connections: the machine was delivered from the factory without standard quick-release couplings for the core circuits. Stäubli SBA 08.7103/JV/PA couplings/nipples with a G1/2 connection thread are required.

Condition: excellent (used), Year of construction: 2009, Arburg 420C 1000-350/150 / Production line with the Arburg Multilift H side robot / 2K machine Year of manufacture: 10.2009 Injection unit: Screw diameter: 45 mm Shot weight: 210 g Injection pressure: 1670 bar Dosing volume: 230 ccm Clamping unit: Clamping force: 100 t Tie bar distance: 420x420 mm Mold size: 570x570 mm Ejector: hydraulic Crodpezc N Etefx Afxjg Clamping unit: hydraulic Control system: SELOGICA Additional equipment: Production line with the Arburg Multilift H side robot 2K machine with rotary table Control system with air valve Hydraulic core pull x 2 Control system with hot runner Reinforced injection units – bimetal Proportional valves on injection units – precise injection The vertical injection unit – screw diameter: ⌀30 mm – 71 g/shot Rotary table available at an extra charge Side robot Arburg Multilift H Year of manufacture: 2009 5-axis robot: Z-axis with servo motor (electric); X, Y, B and C axes pneumatic Safety package for robots Robot with adapter, conveyor belt, protective housing Purchase of the robot and conveyor belt available at an extra charge Dimensions: Weight: 5210 kg All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request.

Condition: excellent (used), Year of construction: 2010, 1,0 St. gebr. Spritzgießmaschine Crjdpfx Aezl Svrofxsg Hersteller: KRAUSS MAFFEI Typ: KM500-4300CX Baujahr: 2010 Schließkraft: 500 Tonnen Holmabstand 900 x 900 mm Schnecken DN: 90 mm Max. Hubvolumen: 2.290 cm³ Spritzteilgewicht: 1.777 g/PS Steuerung: MC5 Ausstattung: 2 St. Kernzug Schnittstelle Roboter 12- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät

Year of construction: 2020, condition: ready for operation (used), Offered is a Boy 100E 2K injection molding machine (year 2020, approx. 15160h) including Boy 2C XS unit, Boy LR5 handling (year 2020) as well as Dorner GAL-60 conveyor. 1000kN clamping force, 2-fold core pull, 2-fold air blast, 24mm screw (main unit) + 22mm screw (2K), fully enclosed, hydraulic ejector 42.7kN, OPC-UA & network interfaces, EUROMAP-67 robot interface, robot stroke X/Y/Z: 300mm/800mm/1500mm, conveyor 400mm width, 2m length. Viewing is possible upon arrangement. Crodpfx Aexyk Snefxjg

Condition: excellent (used), Year of construction: 2006, ENGEL DUO 7050/1100 Advanced Injection Moulding Machine Year of manufacture: 2006 Control system: ENGEL EC100 / CC100 (microprocessor-based) Key Technical Specifications Clamping force: 11,000 kN Platen dimensions: 1,850 × 1,810 mm (width × height) Tie bar spacing: 1,400 × 1,150 mm (horizontal × vertical) Mould height: 400 – 1,200 mm Variant A: Reduced minimum mould height to 400 mm (–200 mm) Maximum opening stroke: 1,800 mm Screw diameter: Ø105 mm L/D ratio: 22 (M3 barrel), optionally L/D = 24 (extended M3 barrel) Injection volume (max): 4,160 cm³ Injection weight (PS, max): 3,830 g Injection pressure (max): 2,090 bar Plasticising rate: 112 g/s (for PE-HD, L/D = 22) Injection nozzle: Herzog, needle type, pneumatically actuated shut-off, HP1.1 type, Ø12 mm orifice, M30×2 thread, adapter for ENGEL; no standard nozzle supplied Injection Unit Two injection cylinders with compact design M3 plasticising barrel, bimetallic, corrosion and wear resistant, operating temperature up to 350°C S4V screw Ø105 mm, heat-treated, nitrided, chrome plated, with hardfacing; R9 non-return valve 2D mixing head Ø105 mm TMR mixer Ø105 mm Material hopper with a capacity of 300 l and magnetic grid Clamping Unit Hydromechanical, two-platen system Four high-pressure short-stroke cylinders on nozzle side Four locking nuts on the ejector side Two rapid traverse cylinders (diagonal assembly) Special platen design – horizontal and vertical knockout holes Mould cooling: 10-fold rotameters (0-30 l/min), total of 20 circuits (10 per platen) Cjdow U Tcmjpfx Afxjrg Variant A: Reduced minimum mould height to 400 mm, maximum daylight maintained (2,400 mm), and increased opening stroke

Condition: excellent (used), Year of construction: 2017, ENGEL DUO 11050/2300 injection molding machine Year of manufacture: 2004 Operating hours: 70,029 h Type: hydraulic, two-platen, large-format injection molding machine Clamping unit Crodpfxozvwl Te Afxjg • Clamping force: 23,000 kN / 2300 t • Dimensions of mounting plates: 2900 × 2500 mm • Distance between columns: 2000 × 1600 mm • Minimum mold height: 700 mm • Maximum mold height: 1890 mm • Maximum opening width: 3800 mm Injection unit • Screw diameter: 135 mm • Injection volume: 8870 cm³ • Injection shot weight for PS: 8071 g • Maximum injection pressure: 1600 bar • Screw: replaced in 2011 • Screw design: reinforced, adapted for processing special materials Additional equipment • Magnetic plates for mold mounting – functional and ready for use • Number of hydraulic cores: 2 • Number of mold heating zones / hot runner channels: 36 • Number of hydraulic cascades: 10 • Mold tilting option • Robot: not included Magnetic mold clamping system The machine is equipped with functional magnetic plates, enabling quick mold mounting and replacement. The system is fully operational and constitutes a significant piece of additional equipment for the machine, especially with frequent mold changes. Machine weight • Weight of the main unit: approx. 113 t • Weight of the control cabinet and additional elements: approx. 18 t • Total approximate weight: approx. 131 t

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 203129, clamping force: 400 kN, screw diameter: 18 mm, displacement volume: 23 cm³, Here we offer, as a dealer specializing in injection moulding machines, the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesale supplier of injection moulding machines for over 25 years. Crodox Rvcispfx Afxjg Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2007 Operating hours: 89,470 h Screw and cylinder replaced Machine number: 203129 Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Diverter valve The machine has retrofitted interfaces for: - Mold temperature - Heating channel - Coloration/dosing Control via Siemens Logo PLC Language: German - From first owner - Origin: Germany Regular maintenance by the manufacturer and previous owner Clamping unit: Clamping force: 400 kN / 40 t Tie bar distance: 270 x 270 mm Mounting platens: 446 x 446 mm Opening stroke: 350 mm Mold height: min. 200 mm Max. daylight between platens: 550 mm Ejector stroke: 125 mm Ejector force: max. 30 kN Injection unit: Screw diameter: 18 mm Injection volume: 23 ccm Shot weight: 21 g Injection pressure: 2,500 bar Electrical equipment: Pump: 11 kW Heater: 4 zones, 4 kW Total installed power: 15 kW Pre-fuse: 50A Weight: 2,150 kg Warranty: Warranty valid until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight costs Available from our warehouse in Hannover, Germany Company and machine information: - We only sell machines purchased from active production for our own inventory, from our warehouse in Hanover - All offered machines are checked and tested before dismantling - We do NOT sell insolvency assets – we are NOT brokers selling third-party property. - All machines offered come from successful companies for whom servicing and maintenance are a matter of course - All machines offered can be inspected at our warehouse

Condition: excellent (used), Year of construction: 2022, Krauss Maffei KM 50-55 CX hydraulic injection molding machine Year of manufacture: 2022 STAR picker Fully hydraulic clamping system. MC 6 control system based on an industrial computer with real-time Ethernet technology, equipped with an integrated 21.5" control panel with a color touch screen. Plasticizing unit Complete plasticizing unit for thermoplastics with a screw diameter of 18 mm, with a backflow valve and an open nozzle Nozzle radius 10mm, nozzle opening 4mm TECHNICAL DATA OF THE MACHINE IN STANDARD EXECUTION Clamping unit - Clamping force: kN 500 - Opening force: kN 40 - Dimensions of the mounting plate (h x v): mm 600 x 600 - Distance between columns (h x v): mm 370 x 370 - Mold opening stroke: mm 400 - Minimum mold height: mm 200 - Opening width: mm 600 - Ejector stroke: mm 100 - Ejector force forward/backward: kN 23 / 10 Injection unit - Screw diameter: mm 18 - Ls/D ratio: - 22.2 - Injection pressure: bar 2500 - Injection volume: cm3 20 - Injection shot weight 1): g 19 - Injection speed: mm/s 150 - Injection rate standard: cm3/s 38 - Screw speed, standard: rpm 450 - Plasticizing capacity 1): - at standard screw speed: g/s 4.0 Electrical and hydraulic equipment - Rated power of the pump motor: kW 11 - Installed power of the heaters: kW 3.8 - Number of cylinder heating zones: - 4 Crsdjzhwl Ropfx Afxjg - Dry cycle time / stroke according to Euromap 6 2): s/mm 1.2 / 259 - Oil tank capacity: dm3 180 Dimensions and weight - Net weight with control cabinet: t 2.55 - Machine dimensions (l x w x h) 3): m 3.53 x 1.41 x 1.96

Condition: excellent (used), Year of construction: 1998, Ferromatik Milacron K110D-S/2F / 2K injection molding machine Year of construction: 1998 Injection unit: Screw diameter: 30 mm Injection weight: approx. 85 g Injection pressure: 2298 bar Dosing volume: 99 ccm Clamping unit: Clamping force: 110 t Distance between tie bars: 470x470 mm Size of the clamping platens: 740x740 mm Ejector: hydraulic Clamping unit: hydraulic Control system: Ferromatik Milacron Additional equipment: 2-component injection molding machine Euromap 67 Robot interface Hydraulic core pull x 4 Control system with hot runners Injection unit is wear-resistant and resistant to corrosion Screw diameter in the vertical injection unit: ⌀25 mm - approx. 43 g/hp The machine has been regularly serviced The service center recently replaced the machine's cylinder with screw and the hydraulic valves with new ones Dimensions: Weight: 6300 kg Length/width/height: 5.00x1.60x3.60 m Codjzc Nrmopfx Afxerg All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, Beschreibung: 1,0 St. gebr. Zweikomponenten Spritzgießmaschine mit Roboter Hersteller: ENGEL Cjdpezl T Snofx Afxorg Typ: ES650H/200W-200HL-2F Baujahr: 2001 Schließkraft: 200 Tonnen Holmabstand Holmlos Einbauhöhe min.: 550 mm Öffnungsweg: 700 mm Schnecken DN 1: 40 mm Max. Hubvolumen: 251 cm³ Spritzteilgewicht in PS: 216 g Schnecke DN 2: 25 mm Max. Hubvolumen: 69 cm³ Spritzteilgewicht in PS: 60 g Steuerung: CC200 Technische Ausstattung: -Roboter Engel, Typ: ERC23/1-E -4 Stück Kernzüge -Drehtischsteuerung

Condition: excellent (used), Year of construction: 2016, Arburg 270C 400-70 e² with Arburg Multilift Robot / Hybrid Machine Year of manufacture: 2016 Injection Unit: Screw diameter: 22 mm Shot weight: 31 g Injection pressure: 2000 bar Dosage volume: 34 ccm Clamping Unit: Clamping force: 40 t Tie bar spacing: 270x270 mm Platen size: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: energy efficient and extremely quiet Euromap 67 Robot interface Air valve x 2 Hydraulic core pull x 1 Injection unit hardened - bimetallic Main machine motor - servo motor with inverter drive - energy saving Proportional valve on injection unit – precise injection Self-sealing nozzle Arburg Multilift Select 6 kg traverse robot Year of manufacture: 05.2016 5-axis robot: 3 axes driven by servo motors (electric); axes B and C Travel paths in axes: X-600, Y-800, Z-1000 Robot with adapter, conveyor belt, and safety enclosure Purchase of robot and conveyor belt available at extra cost Dimensions: Weight: 2210 kg Length/Width/Height: 3.18x1.43x1.98 m All machines offered are started up by our service engineers before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request Crsdpozc Ng Refx Afxsg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 244136, clamping force: 3,200 kN, screw diameter: 55 mm, clearance between the columns: 720 mm, displacement volume: 570 cm³, injection pressure: 2,000 bar, injection weight: 521 g, mold height (min.): 300 mm, total length: 7,460 mm, total width: 1,848 mm, total height: 2,267 mm, overall weight: 20,000 kg, For sale is an injection molding machine from the manufacturer Arburg, type 720 H 3200 - 1300, from 2018. The machine is in very good condition. Clamping force: max. 3,200 kN Mold opening force: max. 110 kN Opening stroke: max. 600 mm Mold height (variable): 300 mm to 800 mm Platen distance (variable): max. 900 mm to 1,400 mm Distance between tie bars (H x V): 720 mm × 720 mm Size of the mounting platens (H x V): 1,040 mm × 1,040 mm Max. weight of the moving mold half: 2,900 kg Ejector force | Stroke: max. 86 kN | 250 mm Screw diameter: 55 mm Effective screw length (L/D): 22 Crsdpozl Tc Tsfx Afxeg Maximum screw stroke: 240 mm Calculated stroke volume: 570 cm³ Maximum shot weight (in polystyrene/PS): 521 g Maximum injection pressure (holding pressure): 2,000 bar Maximum material throughput (PS): 86 kg/h Maximum injection flow rate: 713 cm³/s Specific injection pressure (max.): 2,000 bar Nozzle closing force | Stroke (max.): 90 kN | 550 mm Heating power / Heating zones: 22.9 kW | 8 zones 3. Connection values & machine weights Net weight of the machine (without oil): 18,550 kg Oil capacity (hydraulics): 410 liters Cooling water connection: max. 30 °C | min. 1.5 bar differential pressure (Δp) | Nominal size DN 25 Drive power (pump motor): max. 60 kW Total connection power (electrical at 400V/50Hz): 84 kW Max. current / Fuse rating: Machine total: 125 A Heater: 40 A Upon request, transport and loading can be arranged for an additional fee, throughout Europe. Prices plus VAT. Inspection possible by appointment. Contact us, our team will be happy to assist you. Trade-in or exchange is possible! Machine Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, ETC. Gjbn N Ay Dowza Dxogoil Do you need a high-quality but affordable metalworking machine for your production? Or do you want to sell yours? For more information or contact options, please visit our website.

Condition: excellent (used), Year of construction: 2011, operating hours: 57,077 h, functionality: fully functional, machine/vehicle number: 179742, clamping force: 700 kN, screw diameter: 30 mm, displacement volume: 99 cm³, injection pressure: 1,451 bar, injection weight: 89 g, Here, as a specialist dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines from model year 2010 onwards. We have been a wholesaler of injection moulding machines for more than 25 years. Vertical rotary table injection moulding machine – complete service history (annual documentation) Manufacturer: Engel Type: Insert 200H/70 Serial number: 179742 Year of manufacture: 2011 Operating hours: 57,077 h Control unit: CC 200 Language: German/English Fully functional Very well maintained condition Machine comes from the original German owner xxxxx without illustrated peripheral equipment xxxxx Extras: - Light curtain / light barrier - Freely programmable inputs and outputs - 9 freely programmable inputs, programmable by station - 9 freely programmable outputs - Handling interface Euromap 67 - Charge amplifier for cavity pressure-dependent post-pressure switching, including corresponding graphic pages - 3 volt-free monitoring inputs for monitoring peripheral equipment, such as temperature controllers - Euromap 63 interface for connecting to machine data acquisition system - Hot runner and shut-off nozzle control - Complete maintenance booklet - Language: German / English Injection unit: - Screw diameter: 30 mm - Shot weight: 89 g PS - Injection pressure: 1,451 bar / boosted 2,205 - Injection volume: 99 cm³ Clamping unit: - Clamping force: 70 tons / 700 kN - Rotary table diameter: 1,200 mm Codpfx Afoy Ir Nyexjrg - Opening stroke: 305 mm - Ejector stroke / force: 105 mm / 20.1 kN - Fully electric clamping unit Warranty: - Warranty until initial commissioning Loading/Shipping: - Free loaded onto buyer's truck, or free delivery (FOB) against reimbursement of shipping costs - Available ex-stock Hannover, Germany

Condition: good (used), Year of construction: 1998, Screw diameter: 25 mm Cedpsvxh Iuefx Afxerg Clamping force: 25 tons Opening stroke: 350 mm Weight: 2,900 kg Immediately available from stock