Used Injection Plastik for sale (1,877)

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 1973, total width: 1,950 mm, total length: 5,650 mm, total height: 1,920 mm, compressed air connection: 7 bar, input voltage: 380 V, input frequency: 50 Hz, operating pressure: 7 bar, overall weight: 2,300 kg, type of input current: three-phase, CAPACITY 250 pcs/min CAPACITY (REINFORCED BAG) 100 pcs/min BAG WIDTH 830 mm Ksdpfx Aozga T Ieafsdt BAG LENGTH 70-1000 mm BAG THICKNESS 0,020-0,100 mm QTY OF SERVO MOTORS 4 pcs TOTAL POWER 11 kw MACHINE WIDTH 1760 mm MACHINE LENGTH 5650 mm MACHINE HEIGHT 1920 mm MACHINE WEIGHT 2300 kg STANDARD FEATURES - Thanks to the touch operator panel, the bag size, the number of bags, the production speed, the number of bags in the package can be seen, the number of stops in the total count. - There is 1 photocell for cutting printed and unprinted bags - Servo motor controlled pulling rollers help cutting at high speed and with the desired measurement precision. - Thanks to the servo motor controlled welding jaw, strong and quality welding is ensured. - Thanks to the servo motor controlled belt system, the belts work synchronously to the stacking system. - Stoper roller system with servo motor controlled for better stacking - Warp rolls inverter tension control systems - With pneumatic ballerina system - Automatic edge control systems - Automatically stops when the roll is finished - Photocell stops automatically when printing place is not correct - Ability to work in PP, OPP, CPP, High Density Polyethylene ( HDPE ), Low Density Polyethylene ( LDPE ), bags STANDARD EQUIPMENT - Patch handle unit - Handle hole punch - Bottom support welding apparatus - Bottom gusset apparatus - PE side welding (digging) jaw - PE double weld (t-shirt) jaw

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 2082, total width: 1,700 mm, total length: 5,450 mm, total height: 1,900 mm, compressed air connection: 7 bar, input voltage: 380 V, input frequency: 50 Hz, overall weight: 1,500 kg, type of input current: three-phase, CAPACITY 250 pcs / minute max. BAG WIDTH 80 mm – 800mm max BAG LENGTH 70 mm -1000 mm FILM THICKNESS 0.020 mm- 0.100 mm TOTAL ELECTRIC POWER 13 kW (380 V-50Hz) SERVO MOTOR 4 Kjdpozgaw Hsfx Aafsdt UNIT FOTOCELL 1 UNIT TOTAL AIR SUPPLY 6 Bar min MACHINE WIDTH 1650 mm MACHINE LENGTH 5450 mm MACHINE HEIGHT 1900 mm WEIGHT 1475 kg STANDARD FEATURES Through touch operator panel; length of the bag, pieces bag, production speed, visible bag pieces in the package, stop feature in the number of written in total counting.  There is one Photocell. Cut are printed and unprinted bags.  It cuts at high speed and with the desired measurement precision through to the servo motor controlled pulling rollers.  Strong and high quality welding is achieved through to the servo motor controlled welding jaw.  Lsbrszd N Ipj At Dtgsac Through to the servo motor controlled belt system, belts work synchronously to the stacking system.  Through to the servo motor controlled stacking rollers, it provides quality stacking.  Warp rolls with inverter tension control system,  Pneumatic ballerina system,  Automatic edge control system,  Automatically stops when the roll runs out,  When the photocell print location is not correct, it automatically stops.  Roll bobbin binding diameter max 800 mm  Ability to work in PP, OPP, CPP, High Density Polyethylene (HDPE), Low Density Polyethylene (LDPE), bags,

Condition: like new (used), Year of construction: 2020, functionality: fully functional, total width: 1,650 mm, total length: 5,450 mm, total height: 1,900 mm, input voltage: 380 V, input frequency: 50 Hz, overall weight: 1,475 kg, type of input current: three-phase, CAPACITY: 250 pieces/minute max. BAG WIDTH: 80 mm – 800 mm max. BAG LENGTH: 70 mm - 1000 mm FILM THICKNESS: 0.020 mm – 0.100 mm TOTAL ELECTRIC POWER: 13 kW (380 V – 50 Hz) SERVO MOTOR: 4 UNIT PHOTO CELL: 1 UNIT TOTAL AIR SUPPLY: 6 Bar min. MACHINE WIDTH: 1650 mm MACHINE LENGTH: 5450 mm MACHINE HEIGHT: 1900 mm WEIGHT: 1475 kg STANDARD FEATURES - Controlled via a touch operator panel: bag length, number of pieces per bag, production speed, visible number of bags in the package, stop function based on the total count. Kdedpfxozd N Ipo Aafst - Equipped with one photocell. Handles both printed and unprinted bags. - High-speed cutting with precise measurement, achieved through servo motor-controlled pulling rollers. - Strong and high-quality sealing is achieved through a servo motor-controlled sealing jaw. - The servo motor-controlled belt system ensures synchronous operation of the belts with the stacking system. - Servo motor-controlled stacking rollers provide high-quality stacking. - Warp rolls with inverter tension control system. - Pneumatic ballerina system. - Automatic edge control system. - Automatic stop when the roll is empty. - Automatic stop when the photocell print location is incorrect. - Roll bobbin binding diameter: max. 800 mm. - Capable of processing PP, OPP, CPP, High Density Polyethylene (HDPE), and Low Density Polyethylene (LDPE) bags.

Condition: good (used), Manufacturer: Plastik-Maschinenbau GmbH (PM) Model: PM Wiska 30-25 D Serial No.: M0793 Made in: West Germany (Kelberg / Eifel) Type: Single-screw plastic extruder Documentation: Included (original German manual and correspondence from 1987) Condition: Used, but complete and fully functional Kjdpoxu E E Sjfx Aafsdt Location: Ivanka pri Nitre, Slovakia Technical Details (approximate) Screw diameter: 30 mm L/D ratio: 25 D Main drive motor: Lenze GFOT 100-24 (440 V / 26 A / 2 kW / 3000 rpm) Power supply: 3 × 380–420 V / 50 Hz Control voltage: 220 V Cooling system: Air-cooled barrel with heating zones Control cabinet: Included, equipped with relays, circuit breakers, and analog meters Description Compact single-screw extruder for laboratory or small-scale production, manufactured by Plastik-Maschinenbau GmbH in West Germany. Designed for processing thermoplastics, material testing, or small extrusion lines (e.g., tubing, profiles, or coating applications). Supplied with the original electrical cabinet, pressure gauge, and documentation. Mechanically and electrically complete; ready for standard commissioning.

Condition: used, Year of construction: 2017, functionality: fully functional, Operational Haitian MA3800 - MA2500 - MA2000 - MA1600 injection moulding machines Kdedpfx Aoy Iydxoafet

Condition: new, Year of construction: 2012, functionality: unexamined, machine/vehicle number: Modelo Y15V # de Serie C12070192, screw diameter: 22 mm, displacement volume: 36 cm³, injection pressure: 1,417 bar, injection weight: 44 g, ejector stroke: 200 mm, plate length: 240 mm, plate width: 200 mm, plate height: 40 mm, total length: 1,200 mm, total width: 1,200 mm, total height: 2,400 mm, overall weight: 700 kg, heating capacity: 2 kW (2.72 HP), power: 2.2 kW (2.99 HP), type of input current: AC, input frequency: 60 Hz, input voltage: 220 V, I am selling 3 Guan Ming Y-15 V machines and 1 Y-25V machine, all new from old inventory. They have been stored in their original packaging since they were received from China in 2012 and have never been put into production. There are 3 machines with a capacity of 15 tons and 1 machine with a capacity of 25 tons. The Y-15V machines have a 22 mm screw and a maximum injection capacity of 44 grams. The Y-25V machine has a 30 mm screw and a maximum injection capacity of 103 grams. All 4 machines are located in Tepotzotlán, State of Mexico. They are sold without molds, accessories, or spare parts. Price plus VAT. Loading, crane, maneuvering, insurance, and transportation are the responsibility of the buyer. The machines are sold subject to inspection and testing by the buyer. Kedpfxsz Aby Ue Aafedt Payment must be made before the machine(s) are removed.

Condition: reconditioned (used), Year of construction: 2002, operating hours: 45,992 h, functionality: fully functional, clamping force: 220 kN, screw diameter: 28 mm, injection pressure: 1,069 bar, injection weight: 9 g, total length: 2,050 mm, total width: 1,030 mm, total height: 2,780 mm, overall weight: 900 kg, warranty duration: 6 months, Equipment: documentation/manual, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire, is this Boy 22AVV injection moulding machine. Vertical clamp with vertical injection is ideally suited for insert moulding, the operator can load parts for over moulding easily. The pneumatic gate ensures safe operation. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Kodpfxoywx Hqj Aafodt

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, clamping force: 550 kN, screw diameter: 32 mm, injection pressure: 2,127 bar, injection weight: 87 g, total length: 4,220 mm, total width: 1,105 mm, total height: 2,040 mm, warranty duration: 6 months, Equipment: documentation/manual, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire, is this high precision BOY 55A injection moulding machine. Compact yet versatile, the BOY 55A features generous tie-bar spacing and a space-saving footprint. Fitted with a Procan CT controller and a 32 mm screw, it delivers a shot weight of 68 g (PS). Kdjdpfx Aaoypcltofst Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. *The video shown in this listing is of a previously refurbished BOY 55A which is very similar to the BOY 55A machine we are currently refurbishing. Please contact the team if you would like to see the machine in person.

Condition: reconditioned (used), Year of construction: 2004, machine/vehicle number: 63237, clamping force: 350 kN, total length: 2,759 mm, total width: 886 mm, total height: 1,900 mm, overall weight: 1,310 kg, warranty duration: 6 months, Awaiting refurbishment at our headquarters in Northamptonshire is this Boy 35M injection moulding machine. Kdjdpfxjz Armfo Aafet Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: good (used), Year of construction: 2002, overall weight: 3,200 kg, Krauss Maffei 80-220 C1 injection molding machine Kodpfxoz Dquze Aafjdt 80 tons Year 2002

Condition: excellent (used), Year of construction: 2007, operating hours: 81,000 h, Technical Data Year of manufacture: 2007 Clamping side Clamping force: 1300 t Opening stroke/installation height max.: 2300 mm Distance between clamping plates max.: 4000 mm Tool installation height min./max.: 1000 - 1700 mm Clamping plate max. height: 1910 mm Tool size min.: 1000 - 1700 mm Distance between tie bars: 1500 mm Nozzle radius: R40 mm Tool weight: 29000 kg Ejector stroke: 350 mm Kodpfoz Dux Rsx Aafsdt Injection side Screw diameter: 135 mm Injection volume: 8588 cm³ Injection pressure: 1390 bar Injection weight: 7729 g/shot Core pulls AWS/DS: 1/1 Needle gate pneumatic: 1 The machine is supplied with a Kuka robot and can be inspected during production.

Condition: like new (used), Year of construction: 2008, operating hours: 24,600 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, mold height (min.): 300 mm, overall weight: 6,600 kg, Equipment: documentation/manual, Here, we offer the following well-maintained used injection molding machine as part of our injection molding machine trade: We also purchase well-maintained injection molding machines, starting from the current model year 2010. We have been a wholesaler of used injection molding machines for over 25 years. Due to recent developments - tax information and advantage for the used machine: From July 1, 2025, used machines can also be considered for tax purposes with a special depreciation of 30% annually. In addition to the lower price compared to a new machine, you can claim the same depreciation amounts as with a new machine. Keyword: Growth booster, (§ 7 paragraph 2 EStG-E) Manufacturer: KraussMaffei Type: KM 160-750 Control: MC5 Year: 2008 Machine No.: 61011790 Operating Hours: 24,600 h Injection Unit Injection unit/screw: 50 mm Injection volume: 393 ccm Injection weight: 358 g Heating zones: 5 Nozzle stroke: 350 mm Injection pressure: 1892 bar Heating power: 16 kW Clamping Unit Tie bar spacing: 520 x 520 mm Platen size: 820 x 845 (h x v) Clamping force: 160 tons / 1600 kN Opening stroke: 650 mm Maximum platen distance: 950 mm Minimum tool mounting height: 300 mm Ejector stroke: 150 mm Weight: 6,600 kg Pump motor: 22 kW Dimensions: approx. 4.90 m × 1.60 m × 2.10 m Extras -Wedge shoe machine mounting -Hydraulic screw back-rotation lock -Hydraulic screw drive with standard speed -Pneumatic valve 1 on the operator side for blowing function (1 piece 5/2-way valve with 1 solenoid coil). -Control selectable: stroke/time or time/time. Quantity can be manually adjusted via 1 throttle valve at the valve outlet. -Nozzle protection door on the operator side, hinged -Ejector area protection door on the operator side, hinged -Mechanical interface according to EUROMAP 18 for handling device on the non-operator side (with intermediate plate up to and including KM 500) -End position "rear" of the ejector and the tool ejector plate monitored in sequence -Chrome-plated tie bars for the clamping unit and injection unit -Media monitor in the pump room for oil pan monitoring -Enlarged oil cooler for a maximum water supply temperature of 31°C. -Hydraulic core pull control 1-way on the non-operator side. -Water manifold 8-way -12 temperature control points for tool hot runner. Self-optimizing three-point PID controller with accuracy class 0.5. -Ejection of the cooled nozzle tip -Fan on the control cabinet -Power supply system: TN-C or TN-C-S or TN-S system (three-phase networks with a separately routed neutral conductor or a neutral conductor routed together with the earth conductor) Kedpfx Aajz A Iarjfsdt -1 service socket 1-phase 10 A in the control cabinet, connected before the main switch in a country-specific version. -Signal interface according to EUROMAP 67 with fault signal and power supply socket CEE 16 A for handling device. -Event log for continuous recording and retrospective analysis -Quality monitoring package: Process monitoring (cycle actual values and integrals) by specifying tolerance bands, actual value display, actual value storage. Documentation can be printed. -Z-cycle time analysis, cycle storage -Language: German, Greek Visible peripherals are not included in the scope of supply. Free loading ex our warehouse in Hanover - worldwide delivery possible on request. Inspection under power possible by arrangement.

Condition: ready for operation (used), Year of construction: 2008, 1,0 piece injection molding machine with robot Manufacturer: DEMAG Kdodpfxoz Dibms Aafet Type: IntElect 150/520-410 Year of manufacture: 2008 Clamping force: 150 tons Tie bar spacing: 520 x 520 mm Screw diameter: 35 mm Injection volume: 166 cm³ Shot weight: 146 g/shot Equipment: Part removal robot, manufacturer: Wittmann, type: W721, year of manufacture: 2006 Travel distances: Y = 550 mm, Y = 1,200 mm, Z = 2,000 mm 2 x core pull Safety fence

Condition: used, Year of construction: 2008, operating hours: 75,874 h, Compact hydraulic injection molding machine from KraussMaffei with MC5 control system and extensive peripherals. Manufacturer: KraussMaffei Machine type: Injection molding machine Model: KM 65-380 CX International size designation: 380 CX/65 Year of manufacture: 2008 Machine No.: 61011979 Kdsdpfx Aez Au Hzeafst Clamping force: 650 kN Tie bar distance: 420 × 420 mm Max. mold opening stroke: 500 mm Min. mold mounting height: 250 mm Max. opening width: 750 mm Ejector stroke: 150 mm Control system: KraussMaffei MC5 Machine weight: 3,900 kg Operating voltage: 400 V Frequency: 50 Hz Fuse rating: 160 A Total current: 143 A Motor current: 37 A Peripherals: Frigel Microgel process cooler Frigel model: RCD80/12HHP Year of manufacture of cooler: 2014 Refrigerant: R407C Refrigerant quantity: 2.4 kg Cooling medium: Water Temperature range: -5 to +90 °C Max. pressure: 8 bar Weight of cooler: 240 kg Further visible peripherals: Distributor chute from M Fördersysteme, year of manufacture 2002 Equipment: Material/parts handling and additional process peripherals as shown in the images. Location: Freiburg Available from APRIL 2027

Condition: used, Year of construction: 2005, operating hours: 95,000 h, clamping force: 200 kN, displacement volume: 113 cm³, injection pressure: 2,178 bar, overall weight: 11,500 kg, screw conveyor diameter: 30 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Kdsdsz A Ialspfx Aafot

Condition: used, Year of construction: 2003, operating hours: 6,659 h, functionality: fully functional, KraussMaffei injection molding machine KM 300-1400 C2, manufactured in 2003, with extensive peripherals and material supply system. Manufacturer: KraussMaffei Machine type: KM 300-1400 C2 Designation on control panel: KM 300-1400 C2P International size designation: KM 1400 C2/300 Machine type: Injection molding machine Year of manufacture: 2003 Machine no.: 61004124 Machine weight: 14,370 kg Kjdpfx Aoz Apkujafedt Operating hours according to display: 66,598:20 h Control system: KraussMaffei Material supply / dosing: Colortronic UB95 Temperature control / cooling unit: Frigel Microgel RCM80/6HP Year of manufacture Frigel: 2013 Voltage Frigel: 400 V Auxiliary voltage Frigel: 110 V Frequency Frigel: 50 Hz Maximum current Frigel: 17 A Refrigerant: R407C Refrigerant filling quantity: 2.4 kg Temperature range Frigel: -5 to +90 °C Weight Frigel: 200 kg Additional peripherals: Second Frigel Microgel unit, material conveying system, discharge conveyor belt and rotary table available Available from APRIL 2027

Condition: good (used), Year of construction: 2008, For sale is an injection molding machine from Krauss Maffei, type KM 110-380. The machine is in good to very good condition; all maintenance and inspections have been carried out. Technical data: Year of manufacture: 2008 Extended tie bars Pneumatic nozzle shut-off 2x hydraulic core pull 31,000 operating hours Cylinder diameter: 35 mm Clamping force: 1100 kN Mold opening force: 70 kN Euromap63 interface for version > 1-04-09 Nitrogen accumulator available Included components: Wedge shoes with screws and nuts Double-end wrench Kjdpfx Aaeibyatjfsdt Declaration of conformity for the complete control cabinet Certificate USB memory stick Ejector coupling – mechanical, included in the control cabinet All prices are plus VAT. Machine buying and selling BUYING / SELLING PRODUCTION & METALWORKING MACHINES, AMONG OTHERS. Do you need a high-quality, but affordable, metalworking machine for your production? Or would you like to sell yours? For more information or to contact us, please visit our website.

Condition: like new (used), Year of construction: 2017, operating hours: 12,500 h, functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine Hersteller: ARBURG Typ: 720A3200-800/70 Baujahr: 2017 Schließkraft: 320 Tonnen Holmabstand 720 x 720 mm Einbauhöhe min. /max.: 300 - 800 mm Öffnungsweg: 600 mm Schnecken DN 1: 50 mm Ksdpfx Ajv S E Dgoafedt Max. Hubvolumen: 392 cm³ Spritzteilgewicht in PS: 359 g Schnecke DN 2: 22 mm Max. Hubvolumen: 34 cm³ Spritzteilgewicht in PS: 31 g Steuerung: Selogica Technische Ausstattung anfordern.

Condition: used, Year of construction: 2002, functionality: fully functional, Manufacturer: KraussMaffei Type: KM 300-1400 C2 Machine type: Injection molding machine Year of manufacture: 2002 Machine no.: 254603 Machine weight: 12,500 kg Clamping force: 3,000 kN Control system: KraussMaffei machine control system with screen operation Operating hours according to display: 96,208 h Material supply: Material conveying/dosing components installed on the machine Hydraulics: Rexroth components visible Peripheral control: RMS Systems Touch Control available Conveying technology: Discharge/conveyor belt available Kdodez Alpgspfx Aafet Cooling unit 1: Frigel RCM80/6HP Year of manufacture, cooling unit 1: 2012 Voltage, cooling unit 1: 400 V Max. current, cooling unit 1: 17 A Refrigerant, cooling unit 1: R407C Refrigerant charge, cooling unit 1: 2.4 kg Weight, cooling unit 1: 200 kg Cooling unit 2: Frigel RCD80/12HP Year of manufacture, cooling unit 2: 2013 Voltage, cooling unit 2: 400 V Max. current, cooling unit 2: 29 A Refrigerant, cooling unit 2: R407C Refrigerant charge, cooling unit 2: 2.4 kg Weight, cooling unit 2: 240 kg Location: Freiburg Available from APRIL 2027

Condition: used, functionality: fully functional, Used KraussMaffei injection molding machine KM 65-160 C2, manufactured in 2002, with extensive temperature control and a separate Frigel Microgel process chiller. Manufacturer: KraussMaffei Type: KM 65-160 C2 Kdodez Aln Aepfx Aafot Machine type: Injection molding machine Year of manufacture: 2002 Machine number: 641741 Order number: 646746/1 Clamping force: 650 kN / 65 t Machine weight: 3,200 kg Operating hours: 91,836:45 h Operating voltage: 400 V Phases: 3 Frequency: 50 Hz Total current: 153 A Motor current: 30 A Main fuse: 160 A Temperature control: Multiple temperature control circuits Part removal: Conveyor belt Process chiller manufacturer: Frigel Firenze S.p.A. Process chiller model: Microgel RCD80/12HP Year of manufacture of process chiller: 2012 Serial number of process chiller: 1205114 Voltage: 400 V Auxiliary voltage: 110 V Frequency: 50 Hz Max. current draw: 29 A Refrigerant: R407C Refrigerant charge: 2.4 kg Max. high pressure: 27 bar Max. low pressure: 19 bar Medium: Water Temperature range: -5 to +90 °C Max. pressure water circuit: 8 bar Weight: 240 kg Available from APRIL 2027

Condition: used, Year of construction: 2002, functionality: fully functional, Used KraussMaffei KM 65-160 C2 injection molding machine, manufactured in 2002, with extensive peripherals and a Frigel process cooler. Manufacturer: KraussMaffei Model: KM 65-160 C2 Machine type: Injection molding machine Kdodpfsz Almrox Aafst Year of manufacture: 2002 Machine no.: 641736 Clamping force: 650 kN / 65 t Machine weight: 3,200 kg Operating time: 11,481:37 h Operating voltage: 400 V Phases: 3 Frequency: 50 Hz Total current: 153 A Motor current: 30 A Pre-fuse: 160 A Control system: KraussMaffei Peripherals: Material supply, MTF elevating conveyor, drum, flow monitoring / temperature control circuits, and Frigel process cooler Frigel process cooler: RCD80/12HP Year of manufacture of process cooler: 2013 Voltage: 400 V Auxiliary voltage: 110 V Frequency: 50 Hz Max. current draw: 29 A Refrigerant: R407C Refrigerant charge: 2.4 kg Medium: Water Temperature range: -5 to +90 °C Max. pressure: 8 bar Weight: 240 kg Available from APRIL 2027

Condition: reconditioned (used), Year of construction: 2002, functionality: fully functional, clamping force: 500 kN, total length: 3,395 mm, total width: 1,000 mm, total height: 2,000 mm, overall weight: 2,510 kg, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 50M injection moulding machine, fitted with the Procan Controller. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Kdodpfezx Ukfsx Aafet Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. *The video shown in this listing is of a previously refurbished BOY 50M which is very similar to the BOY 50M machine we are currently refurbishing. Please contact the team if you would like to see the machine in person.

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 180398, clamping force: 1,200 kN, screw diameter: 35 mm, injection weight: 186 g, Now fully refurbished by our team at STV Machinery in Wellingborough, Northamptonshire is this high precision Engel Victory VC 500/120 injection moulding machine. This tie bar-less machine is fitted with the Engel Microprocessor controller and 35mm diameter screw, which gives a shot weight of 186 (PS)g. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Kdodpszx Uc Isfx Aafst

Condition: used, Year of construction: 2007, DEMAG Ergotech System 1300/1500-11500 injection moulding machine from 2007 with 13,000 kN clamping force, 110 mm screw diameter and 5,200 g shot weight. Equipped with a Wittmann DR 853 227 linear handling robot (2014) featuring servo B axis 270° and C axis 90°, plus 32 hot runner control zones for advanced multi-cavity production. Factory-configured with 4 hydraulic core pulls and 12 cascade circuits for complex technical moulding applications. CNC CONTROL Controller: Demag Ergocontrol CLAMPING UNIT Clamping force kN: 13.000 Tie-bar clearance (H x V) mm: 1.500 INJECTION UNIT Injection unit size (Euromap): 11500 Screw diameter mm: 110 Max. shot weight (PS) g: 5.200 MOULD FUNCTIONS & HANDLING Hydraulic core pull circuits: 4 Cascade / valve gate circuits: 12 Hot runner control zones: 32 Handling robot (model / year): Wittmann DR 853 227 (2014) Robot strokes X / Y / Z mm: 1.600 / 2.500 / 3.500 Robot rotary axes (B / C): C 90° / B servo 270° DRIVE Max. hydraulic pressure bar: 190 Mains connection V / Hz / A: 3 x 400 / 50 / 348 + 201 Kjdpfx Aaezz Rw Hsfjdt

Condition: excellent (used), Spacer pins Manufacturer: Hassay Savage / Preci Tool Slot width: 3-4-5-8-12 mm Includes guide bushings and inserts. Kedpozy Hrdsfx Aafjdt