Used Injection Plastik for sale (1,855)

Condition: used, Year of construction: 2017, operating hours: 35,502 h, functionality: limited functionality, machine/vehicle number: 1207Q036, clamping force: 4,000 kN, screw diameter: 80 mm, clearance between the columns: 700 mm, displacement volume: 2,010 cm³, injection pressure: 162 bar, injection weight: 1,890 g, mold height (min.): 245 mm, ejector force: 111,000 N, ejector stroke: 205 mm, opening stroke: 655 mm, total length: 7,700 mm, total width: 1,950 mm, total height: 2,240 mm, overall weight: 15,500 kg, heating capacity: 24.5 kW (33.31 HP), pump power: 37,000 W, Equipment: documentation/manual, 400 Tonne Borche machine less than 10 years old. General good condition with some small wear on a couple of toggle pins. Report on machine status and video of the machine running available on request. Fsdpfoyftl Aex Afnsfu

Condition: used, Year of construction: 2022, clamping force: 320 kN, displacement volume: 1,068 cm³, injection pressure: 2,120 bar, overall weight: 14,000 kg, load hours: 2,907 h, screw conveyor diameter: 65 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Ffjdpfx Afsxluk Sjnju

Condition: excellent (used), Year of construction: 2005, operating hours: 76,000 h, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Typ: KM300-1900C2 Baujahr: 2005 Schließkraft: 300 Tonnen Holmabstand 630 x 630 mm Schnecken DN: 60 mm Max. Hubvolumen: 754 cm³ Spritzteilgewicht: 679 g/PS Steuerung: MC5 Fodsxyq S Uepfx Afnefu Ausstattung: 2 St. Kernzug Schnittstelle Roboter Werkzeuginnendruckmessung 24- Fach Heisszonenkanalregelung Schnittstelle Temperiergerät Ca. 76.000 Betriebsstunden

Condition: excellent (used), Year of construction: 2020, operating hours: 4,800 h, 1x Arburg 320C 500-170 Golden Edition with Integralpicker Year of manufacture: 11/2020 Operating hours: 4,800 A total of 3 machines available! 1x Year: 2020 2x Year: 2022 Equipment: CG series 320 C 500 - 170 Thermoplastic cylinder complete, 35 mm, wear-resistant Standard screw coupling, two-flat coupling geometry Selogica direct control system Hydraulic system with 2 variable displacement pumps Anniversary model GOLDEN EDITION Thermoplastic processing Open nozzle 35 mm Nozzle tip for open nozzle Heating band for open nozzle Clamping platen set 320 central Ø 125 mm Electrical connection for blow-off device 1 on machine frame Selector unit, longitudinal installation including connection Programmable conveyor belt in machine frame, longitudinal Preparation for INTEGRALPICKER V Robot system interface (according to EUROMAP 67), 50-pin Basic Connectivity for additional "Connected Services" Printer interface, serial USB CompactFlash interface for data storage Operation authorization with chip card according to EUROMAP 65 Parallel connection for heating band nozzle tip or adapter Freely configurable page for "start-up parameters" Color dosing unit interface Shut-off valve for cooling water inlet Cooling water filter 100 µm included 3 manual-adjustable free cooling circuits GOLDEN Automation Package with IP-V Ffodoyibayjpfx Afneu Regulated machine cooling circuits aXw Control Setup Bundle aXw Control Start-Stop Bundle ARBURG Remote Service (ARS) Productivity package Initial commissioning by ARBURG service Instruction and training on the machine at customer's site CD operating manual and spare parts list Label language German (DE) Without granulate container 50 L Without heating band for nozzle tip Flexible machine mounting on anti-vibration elements Connection for ejector plate safety Quick-release coupling for ejector Water-cooled control cabinet Socket distributor: 1 CEE, 1 Schuko Hydraulic ejector Safety guard open at the top Standard equipment packages Machine equipped with INTEGRALPICKER New ARBURG color scheme

Condition: used, Year of construction: 2013, clamping force: 50 kN, displacement volume: 59 cm³, injection pressure: 2,500 bar, overall weight: 3,700 kg, load hours: 29,000 h, screw conveyor diameter: 25 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Manufacturer: Krauss Maffei Type: KM50-180AX Condition: aus laufender Produktion Operating hours: ca. 26.000 CLAMPING UNIT: - Clamping force: 50 t Öffnungsweg: 300 mm Mould installation height min.: 150 mm Mould installation height max.: 470 mm Tie bar distance (h x v): 410 x 360 mm Plate dimension (h x v): 510 x 460 mm Centering (fix- movingplate): 125 mm INJECTION UNIT: IU180 Screw diameter: 25 mm Injection weight in polystyrol: 54 g Stroke volume: 59 cm³ Einspritzdruck: 2.500 bar CONTROL: MC5 Screen language: DE Operating manuel: DE Ffsdpfxsppigds Afnou EQUIPMENT: - Core pulls: 2 x (Hydr. Kernzug-Aggregat) Air valves: 2 Hot runner control devices: 6 Robot interface: Euromap 67 Other equipment: Qualitätsüberwachungspacket GENERAL DATA: - Installed heating capacity: 8,1 kW Pump drive power: entfällt Total installed power: Motor + Heizung Total weight: 3.700 kg Total size L x B x H: 4,4 x 1,6 x 1,9 m

Condition: used, Year of construction: 2008, clamping force: 160 kN, displacement volume: 251 cm³, injection pressure: 2,500 bar, overall weight: 8,200 kg, load hours: 37,200 h, screw conveyor diameter: 40 mm, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Fedpfx Aowd Udljfnsfu

Condition: reconditioned (used), operating hours: 27,716 h, functionality: fully functional, clamping force: 220 kN, screw diameter: 24 mm, clearance between the columns: 254 mm, displacement volume: 36 cm³, injection pressure: 1,455 bar, injection weight: 32 g, total length: 1,980 mm, total width: 815 mm, total height: 1,897 mm, overall weight: 1,105 kg, Now fully refurbished by the team at STV Machinery is this Boy 22M-HV machine. It has a horizontal clamp unit and a vertical injection unit which it makes it suited for split-line injection. It is fitted with a 24mm diameter screw. Manufactured in 2006 and has less than 28,000 hours. Ffsdpsx U Ay Nefx Afnsu Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest.

Condition: refurbished (used), operating hours: 42,000 h, functionality: fully functional, clamping force: 220 kN, screw diameter: 24 mm, clearance between the columns: 254 mm, displacement volume: 36 cm³, injection pressure: 1,455 bar, injection weight: 32 g, total length: 2,430 mm, total width: 810 mm, total height: 1,620 mm, Our team are currently working on the refurbishment of this BOY 22M injection moulding machine. This machine is fitted with a 24mm screw. BOY machines are very popular due to their small footprint. Any machines awaiting or undergoing refurbishment by us can be reserved with a 10% deposit. As this machine is already underway, you can expect this machine to be fully refurbished by our in-house experts within a matter of weeks. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Ffodpsx U Axfefx Afnsu *The video shown in this listing is of a previously refurbished BOY 22M which is very similar to the BOY 22M machine we are currently refurbishing. Please contact the team if you would like to see the machine in person.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, DR.BOY XS Manufacture year: 2013 Operating hours: 52,398 Stunden Screw: 14 mm Injection pressure: 2298 bar Stroke volume: 6,1 cm³ Clamping Force: 10 t Tie bar distance: 160 mm Mould installation height min.: 100 mm Plate distance max.: 250 mm Fedpeyim H Sefx Afnefu Dimensions: 1500 x 550 x 1400 mm Eeight: 400 kg Connected load: 3,0 kW price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, DR.BOY 22 E Manufacture year: 2013 Operating hours: 60,680 Stunden Screw: 14 mm Injection pressure: 2413 bar Stroke volume: 6,1 cm³ Clamping Force: 22 t Tie bar distance: 254 mm Mould installation height min.: 200 mm Plate distance max.: 400 mm Fjdpfxsyim Hrj Afnjfu Dimensions: 2500 x900 x 1700 mm Eeight: 930 k price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2016, operating hours: 7,278 h, functionality: fully functional, clamping force: 550 kN, screw diameter: 32 mm, displacement volume: 96 cm³, injection pressure: 2,127 bar, Dr. Boy 55 A DUROPLAST (nur 7.278 h) Manufacture year: 2016 Operating hours: 7,278 Stunden Screw: 32 Duroplast mm Injection pressure: 2127 bar Stroke volume: 96 cm³ Clamping Force: 55 t Fjdpfx Afjyim Ensnofu Tie bar distance: 360 x 335 mm Mould installation height min.: 250 mm Plate distance max.: 650 mm Dimensions: 3200 x 1200 x 2000 mm Eeight: 2430 kg Connected load: 11 kW THERMOSET Granule injection unit, Corepuller, Airvalve, Hotrunner 4x price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2014, operating hours: 43,500 h, functionality: fully functional, machine/vehicle number: 194413, clamping force: 2,200 kN, screw diameter: 55 mm, displacement volume: 475 cm³, injection pressure: 1,578 bar, injection weight: 440 g, mold height (min.): 300 mm, ejector stroke: 180 mm, opening stroke: 750 mm, overall weight: 12,740 kg, heating capacity: 13.4 kW (18.22 HP), Here, as a specialized dealer in injection moulding machines, we are offering the following well-maintained used injection moulding machine: As part of our business, we also purchase well-kept injection moulding machines from model year 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Important Tax Information – Special Depreciation Benefits for Used Machines From 01/07/2025, used machines can also be tax-deducted in Germany with a special depreciation of 30% per year. In addition to the lower purchase price compared to a new machine, you can apply the same depreciation allowances as for new machinery. Keyword: Growth Booster, (§ 7 Paragraph 2 EStG-E) Manufacturer: Engel Model: VC 750 / 220 Control system: CC200 Year of manufacture: 2014 Machine No.: 194413 Operating hours: 43,500 h Injection Unit - Screw diameter: 55 mm - Shot volume: 475 ccm - Shot weight: 430 g - Heating capacity: 13.4 kW - Heating zones: 5 - Nozzle stroke: 350 mm - Injection pressure: 1179 bar (up to 1578 bar increased) Clamping Unit - Clamping force: 220 t / 2200 kN - Opening stroke: 757 mm - Max platen distance: 1050 mm - Min mould installation height: 300 mm Fjdpjyc Ewxjfx Afnsfu - Ejector stroke: 180 mm / Ejector force: 80 kN Weight: 12,740 kg Extras - Core pull The machine is in excellent condition and can be inspected under power. Any peripheral devices shown are NOT included in the offer! The machine is available immediately. Delivery terms: - Free loaded onto buyer’s truck or delivered free to site against reimbursement of freight costs Information about our machines and company: - We only sell machines we have purchased from active production, stocked at our Hanover warehouse - All offered machines are tested and inspected before dismantling - We do NOT sell insolvency assets or act as brokers dealing in third-party property - All machines originate from successful, well-maintained operations - All machines offered can be inspected in our warehouse

Condition: excellent (used), Year of construction: 2008, operating hours: 67,848 h, clamping force: 700 kN, screw diameter: 35 mm, displacement volume: 144 cm³, injection pressure: 2,000 bar, injection weight: 132 g, Injection molding machine Arburg 370S-700-290 Product Code: 232 Availability: In Stock Year of production: 2008 Brand: Arburg Fjdpfevwcbgjx Afnjfu Technical data Shot Weight: 132 g Clamping Force: 700 kN Screw dia: 35 mm Injection pressure: 2000 bar Tie bar distance: 370x370 mm Platen size: 510x510 mm Mould height min.: 200 mm Total day-light max: 600 mm Type of controls: Selogica Language: German Power: 23,9 kW Workinghours: 67848 h Weight: 3300 kg Dimensions: 3,8x1,5 m Hopper: No Euromap: Yes Air valve: Yes

Condition: used, Year of construction: 2017, Ser.-No. 138524-100, Control unit: Type Unilog B8, Clamping force: 1,100 kN, Tie bar clearance: 470 x 420 mm, Mould installation height: 200 - 450 mm, Opening stroke: 380 mm, Maximum platen distance: 830 mm, Ejector stroke (hydraulic/electric): 140/125 mm, Ejector force: 25 kN, Dry cycle time: 1.5 s per 294 mm, Maximum mould weight: 1,000 kg, Minimum mould dimension: 296 x 296 mm. Injection unit: Type 350, Screw diameter: 25 mm, Screw stroke: 175 mm, Screw L/D ratio: 22, 1 hydraulic core pull, Calculated shot volume: 85.9 - 220 cm³, Specific injection pressure: 1,595 - 3,000 bar, Maximum screw speed: 350 rpm, Screw torque: 340 - 500 Nm, Nozzle stroke/nozzle force: 250 mm/40 kN. Dosing unit: Manufacturer Movacolor. Injection/dosing unit: Manufacturer Wittmann, Type Feedmax S3-NET, Year 2017. Sprue picker/robot: Manufacturer Wittmann, Type WP80, Year 2018, Travel axes X/Y/Z: 100 x 550 mm x 90°, Compressed air hose reel: Manufacturer Metabo, Type SA250, L 25 m. Machine weight: 4,800 kg, Operating hours: 42,853. This item is part of an online auction Sale is subject to the approval of the client. Ffsdpfx Ajyc Sqxefnju

Condition: used, Year of construction: 2017, Serial No. 138264-100, control system type Unilog B8, clamping force 1,800 kN, clear tie bar spacing 570 x 520 mm, mould installation height 225 - 550 mm, opening stroke 480 mm, maximum platen distance 1,030 mm, ejector stroke hydraulic/electric 180/160 mm, ejector force 40 kN, dry cycle time 1.7 s per 364 mm, maximum mould weight 1,800 kg, minimum mould dimensions 346 x 346 mm, injection unit type 750, screw diameter 45 mm, screw stroke 200 - 225 mm, L/D ratio 22, 1 hydraulic core pull, theoretical shot volume 193 - 442 cm³, specific injection pressure 1,714 - 3,000 bar, maximum screw speed 325 rpm, screw torque 900 Nm, nozzle stroke/force 350 mm/40 kN, dosing unit by Movacolor, injection/dosing unit by Wittmann, type Feedmax S3-NET, year 2021, sprue picker/robot by Wittmann, type WP80, year 2021, travel X/Y/Z 100 x 550 mm x 90°, compressed air hose reel by Metabo, type SA250, length 25 m, machine weight 7,200 kg, operating hours 46,038. This item is part of an online auction. Ffsdpfjyc Sh Djx Afnju The sale is subject to the approval of the seller.

Year of construction: 2011, condition: ready for operation (used), Two Arburg injection molding machines including temperature control units, conveyor belts, cranes and one robot are available. 1) Arburg Allrounder 170S 180-30, year of manufacture: 2011, tie bar spacing: 220mm, crane load: 350kg, total connected load: 50kW, automatic hours: 38396h, pump hours: 42595h, weight: approx. 1750kg. Including Tooltemp TT 157E, Tooltemp 157Es, crane and conveyor belt FA-LU600/LA1400xB300. 2) Arburg Allrounder 170S 180-30, year of manufacture: 2011, tie bar spacing: 220mm, crane load: 350kg, total connected load: 50kW, automatic hours: 44090h, pump hours: 49127h, weight: approx. 1750kg. Including Tooltemp TT 157E, Tooltemp 157Es, crane and conveyor belt FA-LU600/LA1400xB300. Documentation available. On-site inspection is possible. Individual sale possible. Ffodpfsyiflyex Afnsu

Year of construction: 2010, condition: ready for operation (used), A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2100mm, weight: approx. 3500kg, operating hours: 44117h. Documentation available. On-site inspection is possible. Fsdpfoyddy Ujx Afnofu

Year of construction: 2002, condition: ready for operation (used), An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible. Fjdpfx Aoyddy Iofnjfu

Year of construction: 1999, condition: ready for operation (used), An old Arburg injection molding machine and five HB-Therm temperature control units are available. 1) Injection molding machine Arburg Allrounder 270S 250-70, clamping force: 250kN, tie bar distance: 270mm/270mm, platen dimensions X/Y: 380mm/380mm, mold height range: 200mm/550mm. 2) Temperature control unit HB-Therm HB-W 140, year of manufacture: 1999, max. temperature: 140°C, flow rate: 40l/min, max. operating pressure: 12bar, machine dimensions X/Y/Z: approx. 650mm/300mm/1000mm, weight: approx. 75kg. An on-site inspection is possible. Fodexvdfajpfx Afnefu

Year of construction: 2002, condition: ready for operation (used), Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available. Fodjuiykdepfx Afnofu

Year of construction: 2022, condition: ready for operation (used), A new injection molding machine including robot is available. 1) Krauss Maffei injection molding machine, year of manufacture: 2022, clamping system: hydromechanical clamping system with 2 platens. Plasticizing: 8100, screw diameter: 105mm, nozzle radius: 35mm, nozzle bore: 6mm, clamping force: 1700t, control: MC6. 2) Industrial robot Kuka IR 1200 R3100.2 F/K, max. payload: 120kg, reach: 3100mm, repeatability: +/-0.05mm, control: KR C5. Documentation available. On-site inspection is possible. Fsdpfsvpvlcjx Afnofu

Year of construction: 1998, condition: ready for operation (used), Five identical Arburg injection molding machines are available. Clamping force: 800kN, column distance: 420mm/420mm, installation height: 250mm, platen distance: 700mm, nozzle diameter: 45mm, weight: approx. 3800kg, control: Selogica 3.020. All machines include temperature control unit and conveyor belt. Documentation available. The machines are in storage. On-site inspection is possible. Fedpfx Afoviv Dfsnsfu

Year of construction: 2007, condition: ready for operation (used), Various injection molding machines are available. 1) Arburg Allrounder 420 A 1000-400, clamping force: 100t, screw diameter: 30/35mm, year of manufacture: 2005. 2) Demag 1000-420-310 EL-Exis S, clamping force: 100t, screw diameter: 30mm, year of manufacture: 2003. 3) Demag 1000-420-200 EL-Exis S, clamping force: 100t, screw diameter: 25mm, year of manufacture: 2003. 4) Arburg 570 C 2000-150/60 2K, clamping force: 200t, screw diameter: 25/12+15mm, year of manufacture: 2007. 5) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 35mm, year of manufacture: 1996. 6) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30/25mm, year of manufacture: 1995. 7) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30mm, year of manufacture: 1994. 8) Netstal Synergy 600-110, clamping force: 60t, screw diameter: 25mm, year of manufacture: 2001. 9) Arburg 900T 800-150, clamping force: 80t, screw diameter: 25mm, year of manufacture: 2001. 10) 2 KM SilcoStar 922A, year of manufacture: 2007. On-site inspection is possible. Individual sale possible. Some machines are partially dismantled and/or defective. Ffedpowkiicsfx Afnou

Year of construction: 2002, condition: ready for operation (used), A Krauss-Maffei large-format injection molding machine without robots, conveyors, protective housing and attachments is available. Clamping force: 1300t, injection volume: approx. 8000cm³. Total system dimensions X/Y/Z: approx. 13000mm/3550mm/2850mm, machine weight: approx. 83000kg, operating hours: 73259h, production hours: 57753h. Documentation available. On-site inspection is possible. Expected to be available from Q1/2026. Ffjdpfxswut Hye Afnou

Year of construction: 2021, condition: ready for operation (used), An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible. Fedpfew Rqwtjx Afnefu