Used Refrigeration Machine for sale (69,335)

Condition: ready for operation (used), Year of construction: 1998, 2 oil coolers - through-flow oil coolers: year of construction 1998. Refrigerant: R404A, circulation pump, LAE controller MTR11, suitable for clean oil. Documentation available. 1) Type D 20 V, cooling capacity: 2kW, Walter Procon connector plug, total power consumption 1.7kW. 2) Type D 30 V, cooling capacity: 3.3kW, CEE connector plug, total power consumption 2kW. Dimensions X/Y/Z: approx. 800mm/750mm/1100mm. Inspection possible by appointment. Fsdpfx Afox Ecursnefu

Condition: used, Year of construction: 2006, Technical details: weight of the machine ca.: 609 kg voltage: 400 / 3 Ph / 50 Hz V dimensions L x W x H: 0,85 x 1,6 x 2,0 m Cooling of industrial processes Application = water cooling Water tank capacity 210 liters Refrigerant R22 Air intake via 4x mechanical air filters (750 x 750mm) 2x exhaust fan via ceiling Ø 500mm External operation. (Was used with a Trumpf laser cutting machine) Ffedpfxjvdc Hvo Afnou *

Condition: good (used), functionality: fully functional, Technical data: Number of levels: 10 Operating voltage: 230-240V AC Ffsdpsxzufbjfx Afneu Frequency: 50Hz

Year of construction: 2014, condition: used, working temperature 30 ° cooling capacity 7,4 kW fill weight 1,82 kg operating pressure 20/8,6 bar volume capacity 9,44 Kubikmeter/h volume capacity 2900 pro Min. volume capacity 28,5 bar Ffodpfx Aoxb Egcofnju weight of the machine ca. 160 kg dimensions 675 x 835 x 1250 mm

Condition: used, Cooling unit Water recooling unit DALEX type DRF 2 Machine no. No. 38913719 Year of construction 1989 Volume flow 0.35 m3/h Cooling capacity 1950 Watt Operating pressure 2 to 3 bar Refrigerant R 134a Unit was converted from R12 to R134a Operating overpressure 18 bar Pipe connection thread 3/4" Tank volume 600 x 400 x 350 mm = approx. 80 liters Ffsdpfog D H Ruox Afnju Mains connection 380 Volt, 50 Hz Space requirement L x W x H 900 x 800 x 1020 mm Weight 100 kg Good condition

Year of construction: 2006, condition: not inspected (used), Manufacturer: AGRAMKOV Tip: Saratronic Coolant type: 134 a Year of construction: 2006 Fsdpfxsri Rybe Afnsfu

Condition: good (used), IKS cooling unit 20.4 kW Manufacturer: IKS Series: IPE 051 Refrigerant: R407 C Quantity: 3.1 kg Max. pressure: 27.6 bar Temp. min/max: -10/55C Cooling capacity: 20.4 kW Compressor power consumption: 5.6 kW Temperature stability: 2 K Tank capacity: 110 liters Water connections: 1 1/4" AG inch Ffodpexbfknjfx Afnju Cooling air volume: 5370 m3/h Mains connection: 400/50/3 V/Hz/Ph Net weight: 300 kg Dimensions: LxWxH 980 x 800 x 1785 mm You can find more items – new and used – in our shop! International shipping costs on request!

Condition: new, functionality: fully functional, Staying cool, even when temperatures rise! With rising summer temperatures, reliable cooling in production facilities is becoming increasingly crucial. At ONI, we offer high-performance rental cooling systems, ideally suited for use in production environments. Whether as a replacement if your existing cooling system fails, to support insufficient cooling performance, or for general climate control—we have the right solution for your operations. Our portfolio includes: • Chillers from 10 to 10,000 kW cooling capacity • Various designs, including pump-tank units with regulation and control systems • Containerized cooling systems with all necessary fittings and control devices • Cooling towers, dry coolers, and pump-tank systems with complete regulation and control The benefits for your production: • Avoid production downtime with reliable machine cooling • Maximum efficiency with minimal energy consumption • No capital expenditure, as rental is flexible and tailored to your needs • Instantly operational for maintenance downtime, system malfunctions, or seasonal peaks • Flexible connection options for almost any infrastructure • 24/7 hotline and service—even for third-party equipment Plan ahead—avoid unplanned outages We develop comprehensive cooling concepts before acute needs arise, so you are fully prepared for future challenges. Contact us for a no-obligation consultation—we’ll show you how to safeguard your process cooling while minimizing costs and risks. Fedjxbzafopfx Afnefu

Condition: used, Thermo Multifuge 1S-R cooled centrifuge Centrifuge centrifugal machine Voltage: 230V, 50/60Hz Current: 9,2A Power: 1520W Temperature range: -9 °C to + 40 °C Speed: 15000 rpm depending on rotor Bucket 4x type: Heraeus 75002001 L Maximum load: 540 g Maximum speed: 4700 rpm Inserts 4x red: 12 holes of approx. 16 x 60 mm External dimensions (W) x (D) x (H): 68 x 65 x 36 cm For technical data, see type plate. You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. Ffodpfx Ajt Eurijfneu A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 785 mm, travel distance Y-axis: 470 mm, travel distance Z-axis: 530 mm, table width: 500 mm, table length: 900 mm, spindle speed (max.): 8,000 rpm, XYZ LPM Vertical Machining Centre Model: LPM Year: 2016 Ffodoyg N Aaspfx Afneu ‘X’ axis Travel: 785mm ‘Y’ axis Travel: 470mm ‘Z’ axis Travel: 530mm Table Size: 900 x 500mm Spindle Taper: BT 40 Spindle Speeds: 8000 RPM Automatic Toolchanger: 16 station

Condition: ready for operation (used), Consists of the following items: 6 tube bending machines 3 sheet metal rolling machines 1 punching machine 1 longitudinal welding machine (incomplete) The machines can produce the following diameters: Ffjdpeyia Atjfx Afnju M = Machine M1 – Ø70 M2 – Ø92 M3 – Ø105 M4 – Ø110, Ø125, Ø131, Ø135, Ø139, Ø150 M5 – Ø120 M6 – Ø180 M7 – Ø200

Condition: new, mileage: 1 km, power: 50 kW (67.98 HP), gearing type: automatic, fuel type: diesel, overall weight: 2,850 kg, lifting power: 1,000 kg/m, drive condition: 100 %, chain condition: 100 %, Year of construction: 2024, Equipment: additional headlights, cabin, GG010 The new Günter Grossmann GG010 LOADER The Günter Grossmann GG08 loader (1000 kg payload) is brand new. Günter Grossmann is a high quality machine made for a European company. The charger is very strong and can work under all conditions. The charger is very nice. The control panel is very nice and clear. The cabin is soundproof, insulated, equipped with heating, very comfortable and beautifully glazed, allowing safe and comfortable work. The machine has a very durable construction. The machine is equipped with a quick coupler, which makes it possible to change accessories quickly without leaving the cab. Additional equipment: 4 in 1 bucket, crocodile grab, crocodile grab for trees, straw or silage. Fjdpfx Asiit Erofnefu Price 14,550 euros (excl. VAT) Included as standard GG010 loader + bucket + pallet fork + quick coupler Model 1000 kg SPECIFICATIONS Model: GG10 Brand: Günter Grossmann Engine: Changchai 390 Engine: In-line setup, water-cooled four-stroke diesel engine Engine power: 50 hp Speed: 2200 r/min (rpm) Steering system: Cycloid full hydraulic steering system: BZZ-80 System Pressure: 10MPa Service brake: Hydraulic four-wheel brake with staggered shoes Parking brake: manual Tire: 10-16.5 Wheelbase: 2170mm Track: 1285 mm MEASUREMENTS Total length (bucket at ground position): 41--mm Ground to top of cab: 2530 mm Total width: 1600 mm WORKING RANGE Bucket capacity: 0.5 m3 Bucket width: 1600 mm Max. Height Breakout Force: 28KN Rated load: 1000 kg Operating weight: 2850 kg Drive means: four-wheel drive Min turning radius: 4600 mm ACCESSORIES Bucket 4 w 1: 1050 Eur Pitchfork: 1050 Eur Pallet fork: 650 Eur Quick coupler: 600 Eur Drill: 1400 Eur Bale clamp: 950 Eur Grass clip: 950 Eur Lawnmower: 1450 Eur Snowplow: 1375 Eur

Condition: excellent (used), Year of construction: 2016, These machines are marketed as 2 opp machines and very good they are too but we consider them to be great little 1st opp machine in its own right. can be demonstrated Remarkable capacity for such a small machine. Machine has 6 tool holders Year: 2016 Control: ProtoTrak TMX Ffedpfsydvzdex Afneu Table Size: 457 x 381mm ‘X’ axis Travel: 355mm ‘Y’ axis Travel: 305mm ‘Z’ axis Travel: 455mm Spindle Speeds: 50 – 6000 RPM Spindle Taper: BT 30 Tool magazine capacity: 8 station Dimensions w x d x h: 760 x 1220 x 2585mm Weight: 1,100 kg can be demonstrated if required

Condition: good (used), 300 litre powder mixer. Model - 300. Outlet - 5" / 125mm. With timer function. Overall dimensions - L:230xW:83xH:170/230cm. 380V, 3 phase, 50Hz, 3.58A, 1.5kW. WIT.25. Fodpfxjyfmxij Afnofu

Condition: used, Year of construction: 2011, functionality: fully functional, Axima Refrigeration GmmbH Refrigeration Unit Type: Quatum A060-P20-L4. Type: Air-cooled chiller. Serial Number: 68 0037017. Year of manufacture: 06/2011. Manufacturer: Cofely Refrigeration GmbH. Nominal cooling capacity: 530 kW. Refrigerant/GWP: R-134a. Total Refrigerant Charge: 255 kg, 17 bar, CO² equivalent: 365.65 Teq. Dimensions (L x W x H): 5.50 m x 2.40 m x 2.50 m. Weight: 3000 kg. Fsdsyfmzdepfx Afnefu

Year of construction: 2022, operating hours: 4,000 h, condition: like new (used), functionality: fully functional, Wood Shaving machine Fully operational wood shavings machine in excellent condition. Fodexq Rvuepfx Afnsfu For more information, technical details, or photos, please contact us.

Year of construction: 2022, condition: used, We offer this used CHAIN MAKING MACHINE, model CHAIN MAKING MACHINE, year of manufacture 2022. MACHINE FOR PRODUCING CHAINS IN GOLD, SILVER, BRASS. If you have any questions or require further information, please do not hesitate to send us a message or call us. Fedpfxoyhnuws Afnofu

Condition: like new (used), Thom Type SI Spout Inser­ter Machi­nes for inser­ting the spouts into pre­fa­bri­ca­ted pou­ches. Fjdpox Utd Eefx Afnofu Model - Thom SI‐900 Semi­au­to­ma­tic machi­ne Ide­al for sam­ple pro­duc­tion and small series pro­duc­tion Capa­ci­ty: Up to 10 pou­ches / min. Thom fil­ling and packa­ging machi­nes are in demand ever­y­whe­re whe­re fle­xi­ble packa­ges need to be fil­led (pou­ches / refills): in the food indus­try, the cos­me­tics and deter­gents indus­try or in the beverage fil­ling.

Condition: used, Year of construction: 2015, XYZ 2-OP Vertical Machining Centre ProtoTRAK TMX Control (2015) Year of Manufacture: 2015 Spindle Speeds to 6,000rpm Spindle Taper BT30 Table Size 457 x 381mm Table Travels 355 x 305 x 455mm (XYZ) 6 Station ATC Rapid Traveres 15m/min Footprint 760 x 1,220 x 2500mm Weight 1100kgs 415V Electrics Air Require for ATC Fodpfx Afjya H Nksnofu For sale with *Jet Machinery Ltd* Jet Machinery Stock No: #79155 Machine Serial Number: SOP02060 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: new, Year of construction: 2023, functionality: fully functional, 5-axis travelling column machining centre - SAMAG SFZ3500- with swivel head and internal rotary table (Ø:1000mm, interference Ø:1300mm) X:3500mm Y:1000mm Z:1000mm Spindle: SK50 max. 12,000rpm 54kW Tool changer: 60 Ffsdettv Hajpfx Afnsu Control: Heidenhain TNC7 Coolant system with paper belt filter Internal coolant supply: 40bar (max. 80bar) Internal air supply through the spindle 3D touch probes Collision monitoring (DCM) Kinematics Opt The machine is available at short notice and can be inspected and tested at the factory.

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Fjdjyaywhjpfx Afnsfu Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2010, condition: excellent (used), machine/vehicle number: 09942, Mercerizing machine No.: 09942 Year of production: 2010 Manufacturer: Goller Textilmaschinen GmbH Am Hammeranger 1 95126 Schwarzenbach/Saale GERMANY Ffsdpfx Afsyhn A Isnsu The machine is used for mercerizing cotton fabrics (knitted fabrics) with caustic soda solution in three stages: treatment with alkaline solution, washing (stabilization) and rinsing (neutralization).

Condition: good (used), Year of construction: 2001, In good technical condition and fully operational. Manufacturer: Rollsett Machine Oy Finland. Year of manufacture: 2001. Profile height: 18 mm. Entry width: 1,250 mm. Overall width: 1,146 mm; 1,166 mm. Construction width: 1,100 mm. Min./max. length: 0.5 lm/8 lm at a thickness of 0.50 mm. Accessories, aids: screws, sealing tapes, profiled seals, anti-condensation treatment, light profiles. Fodpox Tf Itsfx Afnefu

Condition: used, Year of construction: 2002, functionality: limited functionality, machine/vehicle number: 2123, FAMAR AP60, including one size part for tablets and one size part blister PVC-ALU, 10 cells, for capsules size “0” Ffjdpfsv S Eurex Afnsu Sold as seen

Condition: used, Year of construction: 2019, functionality: fully functional, feed length X-axis: 787 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, spindle speed (max.): 5,000 rpm, workpiece weight (max.): 600 kg, The machine is in good technical condition, connected to power and can be tested. Fedpfx Aexxtmfofnjfu