Used Neophot 2 for sale (77,592)

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 39.963TW, working height: 1,300 mm, planer shaft diameter: 60 mm, workpiece height (max.): 250 mm, workpiece width (max.): 300 mm, power: 18.5 kW (25.15 HP), A new two-sided planing machine is for sale! TECHNICAL DETAILS Processing: Two-sided planing (calibrating) Thickness tolerance: < ±0.1 mm Workpiece length min./max.: 800 / 3,200 mm Minimum length for continuous feed: 1,250 mm Workpiece width max.: 300 mm Workpiece height min./max.: 20–250 mm (each ±1 mm) Passage height: 280 mm Chedpez A Ubiefx Aknsc Working height: approx. 1,300 mm Number of spindles: 2 Spindle diameter: 160 mm Planer shaft diameter: 60 mm Feed speed: 5–20 m/min, continuously adjustable Ram columns: 4 × Ø 110 mm MACHINE DETAILS Input voltage: 3 × 400 V AC Frequency: 50 Hz Network type: TNS, for industrial networks Control voltage: 230 V AC / 24 V DC Power: 18.5 kW Power of feed motor: 9 kW Compressed air connection: 8 bar Electrical equipment: Télémecanique / MOELLER / SIEMENS Machine color: RAL 7035 Light Grey / RAL 3003 Ruby Red Cabinet color: RAL 7035 Light Grey / RAL 3003 Ruby Red Total weight: 7,000 kg EQUIPMENT Continuously adjustable feed speed Feed rollers individually and directly driven by separate gear motors Electronically synchronized feed rollers Grooved feed rollers in front of the planer shafts Smooth feed rollers at the outlet Hard-chrome-plated tables, feed rollers, pressure elements, and stops Automatic feed deceleration in case of overload Processing motors with electronic soft start controls Integrated DC motor brakes Télémecanique ALTISTART Control panel on a pivoting arm on the front wall of the cabinet

Condition: used, Year of construction: 2000, machine/vehicle number: 000909 / 2000, functionality: fully functional, power: 15 kW (20.39 HP), volume flow: 10,500 m³/h, filter area: 61.5 m², overall weight: 1,950 kg, System Description A complete, stationary AL-KO dust extraction and filtration system, PROFI-JET BG 2, for wood dust is for sale. The system was operated within the production area; the filtered air was returned to the room via the existing return air duct. The system is currently fully installed and can be inspected before dismantling. The system includes the filter unit, automatic compressed air cleaning system, rotary valve airlock, JKF industrial fan, silencer, complete control cabinet with Siemens control panel, and large sections of the existing galvanized extraction and return air ducting, subject to agreement. Technical Data - Filtration System Manufacturer AL-KO THERM GmbH, Dust Extraction Technology Division Type PROFI-JET BG 2 Serial No. / Year of Manufacture 000909 / 2000 Airflow Rate 10,500 m³/h Filter Area 62.5 m² Weight approx. 1,600 kg Compressed Air Connection max. 6.0 bar Filtration Surface filtration with compressed air cleaning Wood Dust Classification H1 - suitable for the separation of wood dust; residual dust content of 0.2 mg/m³ is maintained Operating Mode Indoor installation with return air to the production area Industrial Fan Manufacturer JKF Industri, Denmark Type Fan JK-40 MTD L Power 15.0 kW Speed 2,900 rpm Chsdpez Ikzpsfx Aknec Voltage 400/690 V Max. Speed / Temperature 3,500 rpm / 70 °C Weight 249 kg Year of Manufacture 2000 Rotary Valve Airlock Manufacturer / Type AL-KO ZRS 960, Art.-No. 937 805 Year of Manufacture 2000 Rotor / Number of Blades 320 mm / 7 Inlet 250 × 960 mm Outlet 208 × 960 mm Flow Rate 47,450 l/h Motor Power 0.55 kW Speed 12 rpm Voltage / Frequency 400 V / 3~ / 50 Hz Rated Current / Protection Class 1.75 A / IP54 Scope of Supply / Equipment AL-KO PROFI-JET BG 2 filter unit automatic filter cleaning using compressed air AL-KO rotary valve airlock ZRS 960 JKF industrial fan JK-40 MTD L, 15 kW silencer and return air ducting complete control cabinet / system control with Siemens control panel large sections of the existing extraction and return air ducting can be taken over, subject to agreement Terms of Sale Location: Bierigutstrasse 18, 3608 Thun, Switzerland Sale possible immediately. The system is sold in its current installed condition. Dismantling, removal, loading, transport, and any export/import procedures and customs clearance will be carried out entirely by the buyer at their own expense and responsibility. Dismantling and removal must be completed by July 31, 2027, at the latest. Inspection possible by arrangement. Sale in the existing condition, as inspected, without any guarantee or warranty. Note Due to its complete design with filter, 15 kW fan, automatic cleaning, rotary valve airlock, control system, and available ducting, the system is particularly interesting for carpentry shops, timber construction companies, window manufacturers, and other wood processing businesses.

Condition: like new (used), functionality: fully functional, Year of construction: 2012, operating hours: 7,000 h, Equipment: CE marking, documentation/manual, RAS Multibend Center 79.26–2 Maximum board length: 2560 mm Maximum board width: 1500 mm Maximum bending height (four-sided): 203 mm Up and down bending Tool changer Board feeder for robot loading KUKA loading robot KR 150-2K Various tools for sheet metal thickness 1-2.5 mm Only approximately 7,000 operating hours! Absolutely like new condition, evident, among other things, in the hardly worn original tools. Inspection while the machine is powered on is possible. Price is ex works; the buyer is responsible for dismantling. Csdpfjz Ig Tuex Aknshc

Year of construction: 2006, condition: good (used), For sale are 3 Siemens component placement machines, consisting of: 1 unit X 2 (year of manufacture 2006), model B 348 = €10,900 + VAT 1 unit X 2 (year of manufacture 2006), model B 251 = €10,900 + VAT Chodpfx Ajyrm E Aoknjc Both machines have been inspected and tested for full functionality in our workshop. All machines have a valid maintenance report. An on-site inspection is possible and desired. Please refer to the photos for the technical data and configuration of the respective machines. We will also be happy to answer any questions you may have about the machines in person. Upon request, a reference run video is available for each machine. We can also carry out modifications for your specific application for an additional charge. The machines are sold without component tables or MTC. Location of the machines: Zollner Elektronik AG / Warehouse Roding / Buchenstraße 18 - 20 / 93426 Roding

Condition: used, Year of construction: 2012, power: 110 kW (149.56 HP), Hargassner 110 kW – Biomass Boiler (Pellet / Wood Chip) – 2 Units Available, Cascade Operation Possible For sale is a Hargassner 110 kW fully automatic biomass boiler in a modern design (year of manufacture: 2012). ⚠️ 2 identical boilers available! ➡️ Ideal for cascade operation up to approx. 220 kW ➡️ High operational reliability and optimal performance modulation — Technical Data: • Year: 2012 • Output: 102–109 kW • Combustion output: up to 116.5 kW • Max. temperature: 95 °C • Max. pressure: 3 bar • Water volume: 190 liters • Weight: approx. 1010 kg — Key Features: • Fully automatic operation • Lambda sensor → automatic combustion control • Modulating output (demand-based adjustment) • Automatic cleaning and de-ashing • 3-pass boiler → high efficiency • Fireclay-lined combustion chamber → clean combustion • Automatic grate (self-cleaning) • Very low power consumption (~0.18 kW) • Modern, energy-efficient system — Feeding Technology / Equipment: • Incl. feed auger (standard equipment) • Currently equipped with an automatic pellet suction system (vacuum system/suction feed) ➡️ Very simple pellet operation: • Connection to pellet storage via flexible hose • System automatically draws pellets into the boiler • Fully automatic operation without manual feeding ➡️ Optional: Can also be used for wood chip operation (by connecting to a discharge system) — Chsdpfx Aey A Ei Njknec Condition: • Recently dismantled • Was fully operational until dismantling — Inspection: Viewings are possible by appointment at our 1,500 m² warehouse in Mosonmagyaróvár, Hungary TOP HEATING SYSTEMS – Used Heating Systems, Boilers, Heat Pumps & Accessories Direct from Stock We are a family business with around 20 years of experience in heating technology, boasting a 1,500 m² warehouse in Mosonmagyaróvár, Hungary, with a constantly available stock of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and about 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after the Austrian border. 🔥 Our inventory includes: • Wood chip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermal ventilators • Hot air blowers • Warm air heaters • Industrial heaters • Buffer tanks • Heat exchangers • Feed augers • Discharge systems • Burners • Pumps • Extensive heating accessories ⚙️ Accessories and Components: Additionally, we have a wide range of accessories, including circulation pumps, plate heat exchangers and many other components – from small-scale applications to industrial-scale solutions. 🏭 Brands in our range: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current Offers: Most of our current offers can be found on our website: topheatingsystems.com In addition, we have further units that are not yet listed. 📅 Inspection: A viewing at our warehouse is possible by prior appointment. If you are interested, please contact us – we will help you find the right solution.

Condition: like new (used), functionality: fully functional, overall weight: 200 kg, Year of construction: 2000, pressing force: 2 t, throat depth: 150 mm, Hydraulic Press Atsugi Model AP-2-M Used Load Range: 5-20 (kN) Chodpfx Aovbdyfoknsc Stroke (mm): 150 Down Speed: 60 (mm/s) Up Speed ​​73.8 (mm/s) Working Area Open Height: 250mm Open Depth: 150mm Table Size: 450x320mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/6L Total Weight (kg) 200 Body Size ​ Height (mm) 987 Width (mm) 505 Depth (mm) 735

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 88462-85, travel distance X-axis: 760 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 42,000 rpm, controller model: RÖDERS RMS 6 Version 4.20, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Control system: RÖDERS RMS 6 Version 4.20 Travel range, X-axis: 760 mm Travel range, Y-axis: 550 mm Travel range, Z-axis: 300 mm Table dimensions: 860 x 550 mm Max. workpiece weight: 800 kg Feed rate: 0 to 30,000 mm/min Positioning accuracy: 0.005 mm Spindle speed: 42,000 RPM MACHINE DETAILS Control system: RÖDERS RMS 6 Version 4.20 Dimensions & Weight Dimensions (L x W x H): 5,000 x 3,000 x 2,700 mm Weight: 7,000 kg EQUIPMENT 2 EROWA clamping systems Additional suitable accessories Cedpez Iludofx Aknjhc Cooling system Extraction system Work bench with fixtures 3D measuring probe External reference: Alesco - Lot 62

Condition: repair required (used), Year of construction: 2003, functionality: limited functionality, REF: MM6413 1 x Gainsborough Engineering Ltd packing system, previously used to pack small machine components. Comprising of infeed pocket conveyor, vertical form, fill and seal bagger fitted with Zodiac HS printer and an outfeed conveyor. Manufacturer - Gainsborough Engineering Ltd Model of VFFS bagger – GV2K1. Date of manufacture – 2003. Cjdsy Hlkbspfx Aknjhc Sealing bars - 250mm long (vertical & horizontal). Reel width - 505mm. Current film - 230mm. Sorting / infeed table - 1500mm long x 710mm wide. Outfeed conveyor - 290mm wide belt x 950mm outfeed. Overall footprint - 6.15m long x 1.7m wide x 2.2m high. Condition – Not operational, out of action 3-4 months.

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, machine/vehicle number: 641/302, total width: 600 mm, total length: 800 mm, total height: 1,300 mm, overall weight: 120 kg, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified timeframe between November 16, 2026, and November 26, 2026! MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Rated current: 30 A Connected load: 8.1 kW Codpfxoz Il Iks Aknjhc Dimensions & Weight Dimensions (L x W x H): 800 x 600 x 1,300 mm Weight: 120 kg External Reference: Steinbach & Holler - Lot 62

Condition: excellent (used), Year of construction: 2014, We are offering for sale these two Bosch UL-S 14000 steam boilers, which are in very good condition. They were manufactured in 2014. Csdpjzg Nt Dsfx Aknohc Manufacturer: Bosch Type: UL-S 14000 Year of manufacture: 2014 If you have any questions or require further information, please do not hesitate to contact us.

Year of construction: 2020, condition: used, machine/vehicle number: E22SJ20072839180, The iCombiPro is the latest combination oven from RATIONAL. The iCombiPro 20-2/1 electric model, with 20 GN 2/1 or 40 GN 1/1 racks, is easy to operate even for untrained personnel, as it achieves outstanding food quality without requiring constant monitoring. The ultra-fast intermediate and self-cleaning cycles keep your appliance sparkling clean. The combination oven has been completely refurbished in our in-house workshop and is therefore fully functional and free of defects. It comes with a 6-month warranty on all electrical components. The iCombi Pro has only operated for 5834 operating hours! Manufacturer's recommended retail price: €30,739.49 net = €36,580 gross Request your best price. Our service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs High-quality brand-name appliances at fair prices Professional and competent advice – before and after the purchase Flexible options for shipping or self-collection Provision of operating manuals, connection diagrams, and spare parts Complete range of accessories at attractive prices Condition: used, inspected, fully functional Technical data: W x D x H: 1082 x 1117 x 1872 mm Minimum door opening dimensions for transport: W x H: 1200x1900mm Serial number: E22SJ20072839180 Year of manufacture: 07/2020 Max. loading quantity/rack: 5 kg Max. total loading quantity: 100 kg Weight of electric appliance: 325 kg Electrical connection conditions: Voltage: 3 NAC 400 V Electrical connection power: 67.9 kW Steam operation power: 54 kW Hot air power: 66 kW Fuse rating: 100 A Water connection conditions: Water inlet (pressure hose): 3/4 inch Water outlet: DN 50 Chodpozwu U Iofx Aknoc Other information: Temperature range: 30°C to 300°C Senses the current cooking chamber conditions Recognizes the size, loading quantity, and product condition and calculates the browning accordingly Learns which cooking habits are used frequently and implements them Determines the ideal cooking path to achieve the desired result MyDisplay – a customizable, user-specific operating display TFT color display and touchscreen Application and operating manual can be accessed on the appliance display Core temperature probe with automatic error correction in case of probe failure and positioning aid Door compartment with glazed glass, energy-saving LED interior lighting Including energy consumption display Humidity regulation: percentage-accurate humidity measurement and setting Individual programming of at least 350 cooking programs with up to 12 steps Humidification adjustable in 3 stages USB interface High-performance fresh steam generator with automatic descaling 5 programmable air speeds Integrated, maintenance-free grease separation system without additional grease filter Cool-down function: rapid cooling of the cooking chamber Automatic adjustment to the installation location (altitude, climate, etc.) Appliance door with ventilated triple-glazed pane and pivoting inner pane Fixed wastewater connection permissible according to SVGW standards Splash and spray water protection IP X 5 Separate solenoid valves for soft and warm water up to +30°C Automatic start time preselection adjustable with date and time Material inside and outside made of stainless steel DIN 1.4301 WiFi module integrated Subject to change and errors.

Condition: good (used), Year of construction: 2003, functionality: fully functional, HAAS VF 2 VERTICTAL MACHINING CENTRE TABLE 914 X 356 MM TRAVERSES - 762 X 406 X 508 MM MAX CUTTING RATE 16.5 M/MIN SPINDLE MOTOR 20 HP 20 ATC Chedpfx Ajz Ehxyjknsc 40 TAPER SPINDLE SWARF CONVEYOR STANDARD COOLANT OVERALL DIMESIONS - 2790 X 2350 X 2650 MM WEIGHT 3.5 TON ORIGINAL PAINTWORK , VERY VERY GOOD FOR ITS AGE .

Condition: used, Year of construction: 2009, functionality: fully functional, Duplo 5000 PRO Booklet Maker Stitch/Fold/Trim with 2x Towers Year 2009 From a Ex Public sector Council Very low use, and low mileage. Cedpfx Aoz Idfheknohc Has been on Service contract since new by Duplo UK Stitching heads 2 Collators (20 Bins) Video on request Collection from my warehouse in Reading

Condition: excellent (used), Year of construction: 2019, Fan Systems WITT A-RNZ9/560/710/2 Centrifugal fan 2019, unused, mounted on frame with 45KW motor, see plates for full spec Cedpfx Aez E Nqqjknohc

Condition: used, Year of construction: 1989, table length: 2,240 mm, table width: 1,400 mm, workpiece weight (max.): 5,000 kg, controller model: Siemens 840D, No minimum price – guaranteed sale to the highest bidder! Submitting a bid commits you to collecting the item on time, no later than October 31, 2026! TECHNICAL DETAILS Longitudinal adjustment of the table (X-axis): 2,000 mm Transverse adjustment of the intermediate slide (Y-axis): 1,600 mm (1,500 mm) Vertical adjustment of the crossbeam (W-axis): 900 mm Adjustment of the drilling spindle (Z-axis): 400 mm Distance between the table clamping surface and the spindle head: min. 100 mm Distance between the table clamping surface and the spindle head: max. 1,400 mm Passage between the columns: 1,600 mm Workpiece weight max.: 5,000 kg Tool holder: SK 50 Table Width of the clamping surface: 1,400 mm Length of the clamping surface: 2,240 mm Clamping surface: 3.14 m² Number of T-slots: 9 Chjdpfx Aoz Hvyzeknec T-slot width: 22 H7 mm Distance between T-slots: 160 mm Adjustment speeds Axis X: 0.1–4,000 mm/min Axis Y: 0.1–4,000 mm/min Axis Z: 0.1–4,000 mm/min Difference between adjacent feeds: 0.1 mm/min Rapid traverse speeds Axis X: 12,000 mm/min Axis Y: 12,000 mm/min Axis Z: 8,000 mm/min Axis ZW: 1,600 mm/min MACHINE DETAILS Control system: Siemens 840D Dimensions & Weight Space requirement (L × W × H): 7,000 × 6,500 × 5,300 mm Weight: 22,500 kg EQUIPMENT Comprehensive documentation All fluids will be drained before collection. Data backup has been saved to a USB drive. A 10-ton bridge crane is available on-site to assist with disassembly and loading. A forklift can be used if arranged in advance.

Condition: excellent (used), Year of construction: 2007, Stöckel FX 80/50 ST 2 Surface grinding machine Stöckel FX 80/50 with ST 2 control, year of manufacture 2007, in SUPER condition. CE-compliant!! The machine comes from the training workshop of a renowned German mechanical engineering company. Technical data: Year of manufacture 2007 Cedez Ipk Ajpfx Aknehc Technical data Clamping area (L x W in mm) 900 x 500 Grindable area (L x W in mm) 800 x 500 Magnetic chuck size max. mm 800 x 500 Grinding wheel dimensions max. mm 300 x 25 x 51 Distance table/spindle center mm Max. 400 Table longitudinal feed, oscillating m/min 1 – 20 Creep feed mm/min 0 – 500 Grinding spindle drive, speed rpm 1900 Power kW 7.5 Machine weight approx.: 4.0 t Accessories and equipment: About the machine: Offered is a surface grinding machine Stöckel FX 80/50 with ST 2 control. This universal surface grinding machine is in very good original condition. It comes from a company where it was only used for training purposes. It features a very easy-to-use control system. A grinding travel of 800 mm in the longitudinal axis and a transverse travel of 500 mm make it suitable for toolmaking, fixture construction, and small-series production. The extensive standard equipment and the easy handling of the machine characterize this series. The stable design of the spindle head and the guide principle with double V-guides in the longitudinal and transverse axes guarantee lasting precision. The intuitive operation of the controls simplifies operation and significantly increases productivity. The guides are regularly lubricated by the central lubrication system. The Stöckel has been mechanically and electrically inspected by us. Take advantage of the opportunity to inspect and test the Stöckel on-site under power. You can find more surface grinding machines from well-known manufacturers on our website.

Condition: used, functionality: fully functional, Maweg SE 2 belt grinder Working width: 200 mm Chodpez H H Amjfx Aknsc Working height: up to 180 mm Upper and lower grinding heads

Condition: excellent (used), functionality: fully functional, Equipment: documentation/manual, foot remote control, Demmeler Ergonomix M-2000 with original set of 2 perforated plates, 2.4 m x 1.2 m, plus octagonal 3D table top, 1.1 m, with 28 mm holes Plasma nitrided Almost unused, like new, in top condition Complete with accessories and technical documentation Thanks to the sophisticated arrangement of the entire mechanism, Demmeler’s developers have succeeded in creating an unbeatable large working area while maintaining a small footprint for the Demmeler Ergonomix® M manipulator. The manipulator always positions the heaviest loads in the ideal location. A special feature of the Demmeler Ergonomix® M product family is the large swivel range up to 180°. This provides a decisive advantage for many workpieces, allowing them to be completely machined in a single setup without additional rotation. Load capacity 2000 Model M2000 A = min 490 B = max 970 C = max 1480 Codpfsz Hvy Uex Aknjhc D = max 1000 Torque 1250 Tilt angle 180° Tilt moment 8000

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 350 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 350 mm, workpiece weight (max.): 150 kg, overall weight: 2,000 kg, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified timeframe, between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Maximum workpiece dimensions: 840 × 460 × 350 mm Maximum workpiece weight: 150 kg Work table dimensions: 600 × 300 mm Travel range X-axis: 350 mm Travel range Y-axis: 250 mm Travel range Z-axis: 350 mm Travel range W-axis: 350 mm Rotation speed C-axis: 300 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,600 x 1,200 x 2,200 mm Cjdpfjz Il Eijx Aknehc Weight: 2,000 kg External Reference: Schönichen - Lot 12

Condition: used, Year of construction: 1950, functionality: fully functional, input voltage: 415 V, In unmolested, fine original condition, with an unmarked table and in full working order. Includes arbours and cutters. 3-phase 415v. Table 16cm x 116cm. I have a video available of it running. Chedpfez Hidasx Aknjc From our family agricultural engineering workshop, which is now sold. I'm sorry we don't know much of the tech details and history. Location is near Kings Lynn, Norfolk, UK. You are welcome to come and see it, of course. Forklifting may be possible locally, with the agreement of the new property owner. Buyer to arrange and fund shipment. Message with any questions.

Condition: ready for operation (used), Year of construction: 2024, functionality: fully functional, year of last overhaul: 2024, compressed air connection: 10 bar, We offer 2 HUSKY machines. Available technical specifications for the HUSKY 2 machine, produced on 18/12/24, 23.5 GR, as per the listed data: Model: GL 6L 300 PET Type: P 100/120 E100 Series: 3.0 TONNE Hydraulic pressure: 180 BAR Weight: 57,800 kg Number: 14065 Date: 98/02/04 Encore Husky Package 20 Serial Number: 54360P Code: S2PP-N01 Reference Number: 726698 Year: 3123-64 Additional Information: Hot Runner and Mold Weight: 2315 gr (72) CAV MOLD 48 gr 2 lit. 28 gr 0.5 lit. HOT RUNNER 48 CAV MAAI 48 CAV MAAI 48 CAV KOBOTS / ROBOTS 48 – 1.4 – 27 gr 28 gr Available technical specifications for the HUSKY 1 machine, produced on 29/11/24, 10.5 GR, as per the listed data: HUSKY 1 type P100/120 E100 14/04/1998 SERIES 300 TONNER HYD. PRESSURE: 180 BAR WEIGHT: 21,600 kg Material / Specifications NOVTCO GL300 PET P 100/120 E100 3L Dates DATE: 14/3/14 DATE: 98/04/14 Details AW 5830-A01 72698 E. 3293-111 Remarks ENCORE HUSKY EXTENSION (2)T AP PERIOD 543588 HOT RUNNER AND MOLD 1QTS 92 (F2) WATER CAVITY The machines come with many spare parts and molds, as well as all auxiliary production machines, such as a plastic preform production or PET packaging line: The resin is stored in hoppers. Chjdpfx Akjy Tpfijnec It is dried using a dryer/dehumidifier. It is transferred to the Husky machine via vacuum pumps. The injection molding machine produces the preforms. The water circuit cools the molds and robots. There are filters, metal detectors, and conveyors for material and scrap management. The two lines are almost identical, with separate equipment for each line (No1 and No2). Code Description Function HUSKY Husky Machine Injection molding machine DRYER Dryer Drying of plastic resin FAN Fan Air circulation / cooling CONVEYING RESIN TO HOPPER Resin Transfer Transfer of raw material to hopper VACUUM PUMP Vacuum Pump Creating a vacuum for material transfer WATER PUMP Water Pump Circulation of cooling water DEHUMIDIFIER Dehumidifier Removal of moisture from air/resin RESIN HOPPER Resin Hopper Storage and feeding of material COMPRESSOR Compressor Supply of compressed air AIR TANK Air Tank Storage of compressed air WATER FILTER Water Filter Filtering of cooling circuit METAL DETECTOR Metal Detector Checking material for metal objects PLASTIC SYSTEM CONVEYOR Plastic System Conveyor Transfer of product/material PREFORM BREAKER Preform Breaker Breaking of rejected preforms STRAP Strapping Machine Binding of packaging OVERHEAD CRANE Overhead Crane Lifting loads

Condition: used, axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, first registration: 01/1991, loading space length: 13,470 mm, loading space width: 2,450 mm, loading space height: 2,670 mm, total width: 2,500 mm, suspension: air, tire size: 385/65, tire condition: 30 %, wheelbase: 9,110 mm, color: other, Year of construction: 1991, = Additional options and accessories = - Air Suspension - BPW Axles - Drum brakes = More information = Axle configuration Tyre size: 385/65 Make axles: BPW Tyre profile: 30% Cedpfx Ajz Indbeknshc Brakes: drum brakes Suspension: air suspension Rear axle 1: Max. axle load: 10000 kg Rear axle 2: Max. axle load: 10000 kg Weights Empty weight: 7.100 kg Carrying capacity: 24.900 kg GVW: 32.000 kg Identification Registration number: OB-25-PK

Condition: used, axle configuration: 2 axles, first registration: 01/2000, tire size: 275/70, color: other, Year of construction: 2000, Equipment: ABS, = Additional options and accessories = - Air Suspension - Side Doors = More information = Tyre size: 275/70 Make axles: BPW Rear axle 1: Tyre profile left: 30%; Tyre profile right: 30% Chjdpfxoz Inb Hj Aknoc Rear axle 2: Steering; Tyre profile left: 30%; Tyre profile right: 30% Empty weight: 11.320 kg Carrying capacity: 20.680 kg GVW: 32.000 kg Ask about the lease options Registration number: OG-25-FL

Condition: used, Year of construction: 2011, Cutting length: 4300 mm Vertical cutting height: 2240 mm Horizontal cutting height: 2100 mm Cutting depth: 80 mm Cjdjzxqffopfx Aknehc Saw motor: 5.5 kW Saw blade diameter: 300 mm Speed: 4750 rpm Dust extraction port diameter: 1x 160 mm Dimensions: 5535 x 1500 x 2901 mm Weight: approx. 900 kg Storage location: Nattheim

Condition: used, Year of construction: 2011, AXES Working area X-Y-Z axes * mm 3050-1300-180 Workpiece length in swivel machining mm 1390 Stroke X-Y-Z axes mm 3460-1735-250 Max. travel speed of the X-Y axes m/min 60 WORKING TABLE Number of workpiece supports and vacuum cups 6 / 2 Standard type Standard End stops / Position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles Std/Number/Speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles Std/Number/Speed 1/min 6 (4X-2Y) / 4000 Integrated slotting/sawing unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power Std. / Opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer mounted on the unit carrier in X 4 positions, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction nozzle diameter mm 150+150 (200) Machine weight Kg 3000 * X Distance between the stops - Y Milling center as reference point; Z Workpiece passage GENERAL FEATURES CNC-controlled boring and milling center, in C-frame design and working table with adjustable workpiece supports and vacuum cups, for performing: - Vertical drilling on the surface of the panel - Horizontal drilling on all four sides of the workpiece - Slot milling with disc cutter in "X" direction - General milling operations Self-supporting structure and working table Structure made of a steel welded construction with the control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV supports. Movable unit carrier Box construction made of cold-rolled steel with internal reinforcing ribs, protective devices with bumpers. Working unit Consisting of a drilling head with vertical spindles, horizontal spindles, an integrated slotting and sawing unit and an SCM electrospindle with tool quick-change system type HSK 63 F. Cjdpfx Aeyymz Ueknohc Travel paths of the portal and the unit carrier Movement in the X, Y and Z axis takes place on linear prismatic ball-bearing guides with the aid of pre-tensioned linear guides. The power transmission of the X-axis (movable stand) takes place via a pre-tensioned, backlash-free rack and pinion drive with diagonal movement. The movement of the unit carrier in Y and Z direction takes place via pre-tensioned linear guides. The positioning of the working units and the control of the machine functions takes place via "Brushless" three-phase servomotors and digital drives. CNC CONTROL The control unit consists of a numerical control for the milling and drilling machines and a pre-connected personal computer with a graphical user interface "XILOG PLUS". PC -Office- operating system Windows XP - LCD color screen 17 - Qwerty keyboard - Swiveling control panel - Machine interface software Xilog Plus Xilog Plus features Programming - parametric, graphical and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation in three axes, linear in space, spiral in the chosen plane - Supported programming with graphic and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool changes - cycles - Possibility of plate zero-point shift for performing drilling on inclined or curved plate sides - Complete compatibility with CAD/CAM Routocam (SCM) - AlphaCam Integrated additional functions - Calculator for direct transfer of the calculated data.