STACKING

GREINER ÜBERGABEGERÄT R3

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 403, THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Iedpon D Ew Iofx Ad Djbd Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Vending machine cup capacity/capacity/contenance=223ml 593 // 460 // 8 // Coffee-to-go / thermo mug / thermo cup Filling capacity / Capacity / Contenance=300ml / 12 oz 509 // 452 // 6 // Ice cream cup: filled to the brim=140ml / Filling capacity with headspace 6mm: 120 ml 591 // 459 // 10 // Thermo mug ⌀ 81/180ml 740 // - // - // Standard cup with sealing edge ⌀ 75-120ml 3589 // 458 // 12 // Coffee-to-go / thermo mug / thermo cup: Filling capacity / Capacity / Contenance=80ml 595 // 456 // 10 // Vending cup / Gobelet pour automate: Filling capacity / Capacity / Contenance=150ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granule cup 180 ml / technical part with flat sealing edge

Condition: excellent (used), Year of construction: 1992, operating hours: 41,685 h, Technical specifications: Rated power, kW: 11,3 Mold area, mm: 475 x 250 Iodpfx Aoq A Um Rjd Dobd Max. film width, mm: 495 Min. film width, mm: 150 Max. feed length, mm: 280 Min. feed length, mm: 50 Max. drawing depth/negative, mm: 100 Number of cycles/min.-max.: 48 Consumption of air/cycle at 6 bar: 100 Nl (net-pressurized air) Heat energy to be dissipated: with top heating ca. 10 260 KJ/h with top and bottom heating ca.: 17 715 KJ/h Special equipment: Hollow floor facility available Control cabinet: included

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 3284, (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). Ijdohbu E Hepfx Ad Djbd QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe reliable guarantee for precision. OPTIMUM PUNCHING ACCURACY EVEN DURING MAXIMUM OUTPUT Cam controlled function sequence guarantees absolute precision with every cycle.

Condition: good (used), Threaded snowing machine Hahn and Goebel HG 12E Ijdpsd Rkbrofx Ad Debd Spindle rotation 180-900 rpm 380v MaschNr.1917/16 M4-M65

Condition: new, Year of construction: 2017, operating hours: 25 h, functionality: fully functional, saw band length: 520 mm, saw band width: 580 mm, total height: 1,500 mm, total length: 5,200 mm, total width: 2,350 mm, type of input current: three-phase, overall weight: 2,500 kg, input voltage: 380 V, New machine. Ibedpfx Asunia Hsd Dod

Year of construction: 2007, condition: excellent (used), EXTRUDEX EXTRUDER EN50-30D year 2007 no. 4101264, with melt pump, screen changer and 5 layer pipe head Year of manufacture 2007 As well as 4 co-extruders EXTRUDEX EN25-25D, year of manufacture 2007 APPLICATION: Production of PE 5 layer pipes Iedpfxovyaxuj Ad Dobd Max diameter 32 mm INVENTORY: 1 single-screw main extruder EN 50 4 co-extruders single-screw auxiliary extruders The extrusion system is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr 6, Germany

Year of construction: 2006, condition: excellent (used), Battenfeld HM 100/525 injection molding machine Year: 2006 Controls: Unilog B4 Technical details Short-circuit force: 1000 kN Size of mold plates (hxv): 680mm x 594mm Distance between columns : 470mm x 420mm Mold opening stroke: 500mm Mold height min: 250mm Maximum clearance : 750 mm Isdpfsk Rnvmox Ad Djbd Hydraulic ejector - stroke: 150 mm Forward/reverse ejector force: 41.2 kN Injection unit Screw diameter: 40 mm Ls/D ratio: 22 Injection pressure: 2100 bar Injection volume: 251 cm³ Injection weight , PS: 228.4 g Injection stroke: 200 mm Screw speed: 0 - 318 1/min Max plasticization rate: 30.4 g/sec. Nozzle pressure: 86 kN Electrical and hydraulic equipment Installed heating power: 12.1 kW Adjustable barrel heating zones: 1+3 Pump power 18.5 kW Oil capacity 275 liters Dimensions and weights Total weight of the machine: 4,600 kg Dimensions (L x W x H) 4.3 x 1.5 x 2.0 m

Condition: excellent (used), Year of construction: 2012, Battenfeld HM 110/350 injection molding machine Year of manufacture :2012 Control : Unilog B6 E Injection unit: Screw diameter: 35 mm Injection pressure: 2083 bar Injection volume: 169 ccm Injection volume: 153 g Isdpfx Adju U Ar Ij Dsbd Closing unit : Closing force : 1100 kN Distance between columns : 470 x 420 mm Mold height min: 275 mm Opening : 500 mm Mould height max : 775 mm Ejector stroke: 150 mm General information: Machine dimensions (m) LxWxH: 4.0 x 1.5 x 2.1 m Weight : 4,500 kg Equipment: - The machine is in very good condition and has 35,000 hours of operation. - Bimetallic system - 1 x pneumatic valve - 1 x pulling core - Interface for the robot in accordance with EUROMAP 67

Condition: good (used), Year of construction: 1991, Singer devices Motan Year from 1991 Ijdpfxeidvx To Ad Dsbd Available 6x STK

Condition: excellent (used), Year of construction: 2010, Battenfeld HM 110/350 injection molding machine Year of production: 2010 Control: Unilog B6 Number of working hours - 35 0000 Injection unit: Screw diameter: 35 mm Injection pressure: 2083 bar Injection volume: 169 ccm Injection capacity: 153 g Closing unit: Closing force: 1100 kN Distance between columns: 470 x 420 mm Min mold height: 275 mm Opening: 500 mm Max mold height: 775 mm Ejector stroke: 150 mm General information: Machine dimensions (m) LxWxH: 4.0 x 1.5 x 2.1 m Weight: 4.500 kg Specification: 1. Plasticizing system with a diameter of Ø35mm. 2. (06.X17) Europakiet UNILOG B6 consisting of: Iedpfxowq D Nqo Ad Debd - 07.D00 adjustment elements, - 02.K02 air valve controlled in time function - 01.C01 hydraulic control of the NW 6 core on the closing plate - 06.B21 robot connection according to EUROMAP 67 - 06.R02 2 Schuko 16A sockets mounted on the side wall of the control cabinet - 06.R20 2 CEE 16A sockets mounted on the side wall of the control cabinet 3. 06X06 UNILOG B6S package consisting of - extended functions of the control system with programs - APS system - cycle time analysis - user pages - visualization of graphic functions of actual values in the form of 16 curves - 4 surrounding curves - Alarm and logging protocol extended to 10,000 events - Quality Table function extended to 10,000 last cycles - additional USB ports for network connections - keyboard with foil buttons - Statistical Injection Process Control SPC function - injection speed, plasticization and hold-down pressure regulated by servo valve 4 machines in perfect condition are available.