Used Wille 725 for sale (812)

Condition: used, operating hours: 9,321 h, Serial number: 14 8xxxx Please contact ATS Norway for more information Please provide reference number upon request: 19510 Isdpovyffgjfx Admoa Specifications: Model: Wille 645 Operating hours: Approx . 9,321 Bucket included Good work light Description:Wille 645 wheel loader is sold with accompanying bucket. The machine was purchased as a 1998 model, but there have been later indications that it may be of an older model. The machine is ready for delivery at short notice. Hours: 9321 Own weight: 5700 Model: 645

Condition: used, Compressor control, compressor control, control panel, control box, control unit -Manufacturer: WA Wille Automationstechnik, control box control unit Ijdpog Td D Hofx Admja -Type: unfortunately no type designation -Dimensions: 305/210 / H110 mm -Weight: 4.2 kg

Condition: used, empty load weight: 10,960 kg, maximum load weight: 6,040 kg, overall weight: 17,000 kg, axle configuration: 2 axles, first registration: 08/1996, total length: 2,550 mm, total width: 4,000 mm, suspension: steel, tire size: 205 / 75 R 17,5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum body, 2 axles, SAF axles, leaf springs, ABS (anti-lock braking system), flap, doors, portal doors, interior lighting, front support, rear support, side aluminum undercarriage, twin tires, storage box Body: for exhibition hall IN 100 Only sold as a package with exhibition hall IN 100 and trailer IN 62732 !!! Body parts and accessories, light metal pavilion substructure in semi-circular design, foldable terrace, front with plastic double-webbed panel covering, tarpaulin roof covering, rear anchoring on the roof edges of the two semi-trailers, partial seating, stage, cinema, partial rubber flooring, air conditioning, heating, dimensions of the hall: length approx. 30m, width approx. 20m, height approx. 6m, more detailed description available on request! New price approx. 500,000! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Isdpfxoi Rn Ive Admja - .

Condition: excellent (used), Buderus SE 725 boiler 870kw Iedpfxoiqtmws Admea

Condition: used, empty load weight: 10,960 kg, maximum load weight: 6,040 kg, overall weight: 17,000 kg, axle configuration: 2 axles, first registration: 08/1996, total length: 2,550 mm, total width: 4,000 mm, suspension: steel, tire size: 205 / 75 R 17,5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum body, 2 axles, SAF axles, leaf springs, ABS (anti-lock braking system), flap, doors, portal doors, interior lighting, front support, rear support, side aluminum undercarriage, twin tires, storage box Isdpfx Adoi Rni Ujmsa Body: for exhibition hall IN 100 Only sold as a package with exhibition hall IN 100 and trailer IN 62732 !!! Body parts and accessories, light metal pavilion substructure in semi-circular design, foldable terrace, front with plastic double-webbed panel covering, tarpaulin roof covering, rear anchoring on the roof edges of the two semi-trailers, partial seating, stage, cinema, partial rubber flooring, air conditioning, heating, dimensions of the hall: length approx. 30m, width approx. 20m, height approx. 6m, more detailed description available on request! New price approx. 500,000! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: used, empty load weight: 8,700 kg, maximum load weight: 8,300 kg, overall weight: 17,000 kg, axle configuration: 2 axles, first registration: 08/1996, total length: 2,550 mm, total width: 4,000 mm, suspension: steel, tire size: 205 / 75 R 17,5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum body, 2 axles, SAF axles, leaf springs, ABS (anti-lock braking system), doors, interior lighting, roller shutter, front support, rear support, side aluminum undercarriage, side door on the right, twin tires, storage box Body: for exhibition hall IN 100 Only sold as a package with exhibition hall IN 100 and trailer IN 62733 !!! Body parts and accessories, light metal pavilion substructure in semi-circular design, foldable terrace, front with plastic double-webbed panel covering, tarpaulin roof covering, rear anchoring on the roof edges of the two semi-trailers, partial seating, stage, cinema, partial rubber flooring, air conditioning, heating, dimensions of the hall: length approx. 30m, width approx. 20m, height approx. 6m, more detailed description available on request! New price approx. 500,000! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - . Isdpei Rnkcefx Admoa

Condition: excellent (used), Transport trolley with 2 trays -Stainless steel tub dimensions: 600/400/H220 mm -Design: stable -Dimensions: 540/725/H800 mm -Weight: 30 kg Isdpob Uhnkjfx Admsa

Condition: good (used), Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, revolving drawer cabinet -Tool cabinet: Vidmar rotating drawer cabinet, sturdy design -Drawers: 5 rotating drawers, division/height see photos / height adjustable in hole pattern Ijdpjxf Drrofx Admoa -lockable: without bowl -Dimensions: W 725/480/H 1000 mm -Weight: 98 kg

Condition: repair required (used), For sale is a UVA 725 Plus, year of manufacture 2011, a compact and exceptionally robust vertical CNC machining center from the Hommel-Unverzagt Group – equipped with a Heidenhain TNC 620 control system and SK40 spindle taper. The machine was in production until recently, but currently does not boot fully due to a control error (CC unit). Technical Data Travels: X-axis: 725 mm Y-axis: 460 mm Z-axis: 460 mm Spindle: Speed: 10,000 rpm Tool holder: SK40 Max. tool diameter: 100 mm Max. tool length: 300 mm Max. tool weight: 7 kg Tool magazine: Capacity: 24 slots Ijdpfxoxzvnwo Admsa Tool change time: approx. 2 s Table: Dimensions: 760 × 420 mm Max. table load: 400 kg Machine dimensions (L×W×H): approx. 2200 × 2100 × 2300 mm Weight: approx. 3600 kg Condition & Fault Description: The machine was running flawlessly until recently but now displays various axis configuration and CC/PLC errors at startup: Heidenhain TNC 620 errors include: - “Timeout during processing of CC command” - “The PLC program has been stopped” - “HSCI initialization faulty” - “HSCI Ethernet connection interrupted” - “Configuration of axis X/Y/Z/S faulty” The Command/Control unit (CC) has already been replaced, but the error persists. Therefore, the machine is offered as defective / for repair or as a source of spare parts. Accessories & Scope of Delivery: - Several SK40 tool holders (various sizes, collet chucks, end mill holders, etc.) - Chip conveyor (complete unit) - Machine frame / chip drawer / collecting trays - Hydraulic unit / coolant pump - Machine documentation Documentation includes: - UVA 725 Plus Parts Manual - Operating Manual Heidenhain TNC 620 - Delivery / Preparation / Installation Guide (UVA 550–1600) - Heidenhain TNC 620 User Manual (large folder) Machine Data (according to nameplate): Model: UVA 725 Plus Serial number: 71L1261109 Year of manufacture: 2011 Manufacturer: Hommel Unverzagt GmbH Weight: 3800 kg Manufactured for Hommel Unverzagt in Taiwan

Condition: new, Year of construction: 2025, machine/vehicle number: 20250205015, Field of application: Construction Empty weight: 1.836 kg Generator capacity: 725 kVA CE mark: yes Frequency: 50 Iodpfswyzxzox Admoa Voltage: 400 Transport dimensions (LxWxH): 1,7x0,9x1,45 Production country: CN Please contact Kenny Bongers, Tijmen Pesselse or Arjen van Dijk for more information Flywheel size: SAE0/18'

Condition: new, machine/vehicle number: 1f4581c873ed977cb9602039b, empty load weight: 3 kg, maximum load weight: 34 kg, overall weight: 38 kg, axle configuration: 3 axles, tire size: 385/65 r22.5, Further information Chassis semi-trailer container Fine-grained steel welded construction, saddle plate with replaceable 2 kingpins Container mounts: 1 x 20 foot centered (or swap body container 7.15 / 7.45), not retractable at the front, the pivot pins of the container lock in the longer version 24 to. 2-speed support winch, single-side operation, with straight lower section, without thrust compensation 2 wheel chocks with holder Side collision protection Aluminum underride guard Half-shell mudguards with anti-spray flaps according to EG VA drip tray with 1 1/4 inch drain pipe + 1 1/4 inch stopcock, incl. drip tray, with perforated tread plates, approx. 400 mm wide, left + right between drip tray and side member 4 hose trays approx. 4500 mm long (hose box) for hose pipes 2 x DN 200 outside + 2 x DN 160 centrally arranged, rear hose box (stainless steel) 300 mm deep, splash-proof, cover (stainless steel) with rubber seal all round, with drain hole at lowest point, then without cover on hose pipes 1 stainless steel earthing lug at the rear in FR on the right of the frame, with international earthing sticker on the frame, Steps at the rear right on the underride guard, at the rear in FR right on the outside of the main beam, tread plate approx. 260 mm long and 300 mm wide, Axles + suspension SAF disc brake axles Axle/chassis laser-measured Reduction in tire wear and fuel consumption Axle spacing offset mm (combined transport) up to 44 tons gross train weight Air suspension 1st axle automatic lift axle, including forced lowering and starting aid, actuation of 3x brakes (starting aid is functional up to an axle load excess of 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake system Colored cable routing for easy servicing Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lifting & lowering valve Iodpfxoi Rixko Admea Vehicle stability system Axle load detection via EBS-Canbus signal, for indication via display in the cab, truck must be prepared accordingly, no truck installation (no calibrated scales) Wheels and tires 385/65 R22.5 make of the manufacturer's choice Steel rims, factory silver Electrical system 24 volt, multi-chamber lights, amber LED lighting at the sides 2 white position lights at the front 2 white/red rear lane departure lights 1 x 15-pin socket at the front, without connecting cable Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) This vehicle may only be loaded with 20' tank containers that comply with ISO 668 and in particular ISO 1496-3! The tank containers must have "end-load-transfer areas"! Country of approval / plates Germany Test approval according to EC 2007/46 24/7 service hotline Prepared for single-line license plate holder Warning sign according to ECE - 70 Approval according to ADR acc. to 9.1.1.2 of ADR, EX/II, EX/III / certificate of approval for vehicles for the transport of certain dangerous goods (ex.B3) with warning sign at the rear, not valid for substances according to UN 0331 and 0332 (explosives B-E) Contour marking with refle

Condition: used, Parallel Lathe CAZENEUVE HB 725 Ijdoxnpnkspfx Admsa Between points: 1500 mm Maxi Ø on bench: 725 mm Maxi Ø over saddle: 400 mm Spindle diameter: Ø 80 mm Rotation: from 16 to 1250 RPM Square turret 4-jaws chuck Ø 450 mm Spindle motor power: 13,2 kW Threadings: Metric + Whitworth Tailstock: CM6 Rapid advances Supplied with some sets of hard and soft jaws + one 3 points steady max Ø 250 mm Lubricant tank Lubricant pump Voltage: 220 V Tri Length: 3200 mm Depth with tank: 1600 mm Height: 1800 mm Weight: approx 4,5 T

Condition: excellent (used), Tacchi HD/1450 – 725 x 4000mm CNC Lathe (2012) Serial Number: 7264 Year: 2012 Control: Fanuc OiTD CNC Condition: Used – good working order Technical Specifications: Centre height: 725mm Swing over bed: 1450mm Swing over cross slide: 1000mm Distance between centres: 4000mm Main drive motor: 60 kW Maximum weight between centres (unsupported): 15,000 kg Spindle speed range: 1.9 – 560 rpm Ijdjxc In Sopfx Admsa Features & Equipment: 2 x 3-point steady rests Handwheel Swarf conveyor 4-position hydraulic toolpost 4-jaw chuck Fanuc OiTD CNC control

Condition: excellent (used), Drum for DOPPSTADT SM 725. Length of the drum: 7.00 m Diameter of the drum: 2.50 m Hole size of he drum: 60x60 mm Iedswrzknspfx Admsa

Condition: used, Electric motor, three-phase motor with 3 speeds -Power: 4.4/8-6 kW -Speed: 725/1440/970 rpm Iodpfxjctyqfs Admsa -pole changing -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 44 -Price: per piece -Number: 2x available -Dimensions: 650/440/H320 mm -Weight: 140 kg

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 725 x 6 mm Iedevzmwyspfx Admoa -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: see photos -Weight: 26 kg

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade Isdpfx Adjvzmviomja -Manufacturer: Wagner, saw blade copy blade Ø 725 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: see photo -Weight: 26 kg

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 725 x 6 mm -Inside: Ø: 32 mm Isdpfovzmwaox Admsa -Bolt circle: mm -Number of teeth: 72, see photos -Weight: 26 kg

Condition: used, plastic strapping, strapping tape, packaging tape, tensioning tape, plastic tape -Strapping band: plastic strapping band 2 rolls Isdpfx Adotr R Atomoa -Type: HM 19-725-500 -Width: 19mm -Length: 500 m -Number: 2 rolls -Price/Delivery: complete -Box dimensions: 310/300/H310 mm -Total weight: 12.8 kg

Condition: good (used), saw blade, wood saw blade, circular saw blade, metal circular saw blade, carbide saw blade, segment circular saw blade, saw blade copy blade, saw blade copy blade -Manufacturer: Wagner, saw blade copy blade Ø 725 x 6 mm -Inside: Ø: 32 mm -Bolt circle: mm -Number of teeth: see photo Iedpfjvzmtnjx Admsa -Weight: 26 kg

Condition: used, Three-phase motor with 2 speeds, electric motor -Power: 5/18 kW -Speed: 725/1460 rpm -Shaft: Ø 48 mm -Construction: B3 -Protection class: IP 54 -pole changing Iedpfx Aod E Tx Isdmea -Dimensions: 710/350/H450 mm -Weight: 179 kg

Condition: used, AC motor with 2 speeds, electric motor -Power: 3.3/13 kW -Speed: 725/1465 rpm -Shaft: Ø 42 mm Iedpsc I Iwyjfx Admoa -Design: B3 -Protection class: IP 44 -pole switchable -Dimensions: 640/410/H330 mm -Weight: 135 kg

Condition: used, Three-phase motor, electric motor -Power: 3.8/6 kW -Speed: 725/1440 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: IP 44 -Price: per piece -Number: 1x available Isdpfx Asckd Ehsdmja -Dimensions: 520/380/H360 mm -Weight: 94 kg

Condition: used, Three-phase motor, electric motor -Power: 4 kW Ijdpfx Adjcnhawemsa -Speed: 725 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 550/410/H305 mm -Weight: 97 kg

Condition: used, AC motor with 2 speeds, electric motor -Power: 2.7/10 kW -Speed: 725/1460 rpm Iedjc I Iwzepfx Admja -Shaft: Ø 42 mm -Design: B3 -Protection class: IP 44 -pole switchable -Dimensions: 580/420/H310 mm -Weight: 112 kg