Used Bellow for sale (168)

Condition: ready for operation (used), machine/vehicle number: 06G1062, Drive = compressed air, Material/air ratio = 17:1, Maximum material pressure = 110 bar, Air inlet pressure = 1 to 7 bar, Output volume per double stroke = 60 cm³ with MX spray gun with double hose, unused since the last maintenance in 01/20, Condition as inspected, Kodpfxsiv Ht Io Aqrjnc Ex works, from warehouse Seevetal, subject to prior sale.

Condition: used, functionality: unexamined, -KOM 3181- Two used Graco Inc. bellow pumps are offered for sale here. Knodpfxezltm Ss Aqroc The pumps have the component designation G05B15 A22A. Max. oil temperature: 71 degrees Celsius Max. flow rate: 9 l/min Max. pressure: 6.9 bar Weight: 42.8 kg (per pump)

Condition: good (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 1,530 mm, travel distance Y-axis: 530 mm, travel distance Z-axis: 465 mm, overall weight: 10,500 kg, spindle speed (min.): 12,000 rpm, number of slots in tool magazine: 54, SPINNER U5-1530 Advanced 5-axis simultaneous machining Spindle: SK40 Tool magazine capacity: 54 Knodpszl Eznofx Aqrec Coolant pressure: 70 bar Control system: SINUMERIK 840D sl Bellows renewed (new generation) Tool changer door renewed Tool changer motor renewed Good condition

Condition: like new (used), Year of construction: 2024, functionality: fully functional, machine/vehicle number: 1786, travel distance X-axis: 3,000 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 1,100 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: Sinumerik One, table load: 1,500 kg, rotary table diameter: 800 mm, rotational speed (min.): 25 rpm, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, coolant supply: 20 bar, number of spindles: 1, tool length: 460 mm, tool diameter: 200 mm, tool weight: 10,000 g, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, MATEC-30HV X = 3,000 mm Y = 825 mm Z = 1,100 mm / Horizontal Z = 975 mm / Vertical - 1-axis CNC swivel head Swivel radius 300 mm, maximum swivel angle +/- 105 degrees Direct path measuring system +/-3, optionally continuous or settable with clamping Clamping forces: 2,400 Nm unclamped, 4,200 Nm clamped - Bellows with steel lamellae - Direct path measuring system on X, Y, Z axis - Chip conveyor - Rinsing gun - Centralized oil lubrication - Work area lighting - Siemens Sinumerik ONE control Modern CNC system for highly productive machine tools, consisting of: NCU 1740 22" ITC2200 V3 display MCP 2200 machine control panel - Electronic handwheel (portable) HT2 - Telephone diagnostics / remote maintenance - Motor spindle 15,000 rpm Motor spindle with 30 kW (40% duty cycle) 17 kW (100% duty cycle) Torque 191 Nm (40% duty cycle) 108 Nm (100% duty cycle) - Internal coolant supply 20 bar Tank capacity of paper filter system 900 l Filter capacity 160 l/min. - High-pressure coolant at external nozzles High-pressure coolant pump switchable via M-function in the part program to the external nozzles at the spindle head. #20 bar# - IK-compressed air through the tool - Partition wall for double-station system - 3D wireless probe Ksdpfoxg Dhcox Aqrenc - RTS table probe for measuring and inspection - UT-Tec collision monitoring - Automatic safety doors

Condition: like new (used), Spirax Sarco BSA2T Bellows Sealed Shut-off Valve DN200 PN25 NOS Knodpfx Aozb Rdheqrec Unused Spirax Sarco bellows sealed shut-off valve from stock. High-quality industrial design for steam, condensate and process media. Includes counter flanges. Manufacturer: Spirax Sarco Type: BSA2T Valve Type: Bellows Sealed Shut-off Valve Nominal Size: DN200 Nominal Pressure: PN25 Series: BSA2T Design: Bellows Sealed Valve Seal Type: Bellows Seal Connection: Flange Pressure Stage: PN25 Maximum Operating Pressure: 25 bar(g) Maximum Temperature: 350 °C Body Material: Spheroidal Graphite Cast Iron SG Designation: EN-JS 1025 Flow Direction: indicated Handwheel Operation: Yes Counter Flanges: included Country of Manufacture: United Kingdom Condition: NOS New Old Stock

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: p1276453, measuring range X-axis: 1,200 mm, measuring range Y-axis: 700 mm, measuring range Z-axis: 600 mm, workpiece weight (max.): 650 kg, total height: 2,650 mm, type of input current: AC, total width: 1,271 mm, total length: 2,081 mm, travel distance X-axis: 1,200 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, overall weight: 1,750 kg, input voltage: 220 V, table height: 800 mm, compressed air connection: 6 bar, year of last overhaul: 2025, ambient temperature (max.): 20 °C, Equipment: documentation/manual, type plate available, Measuring volume: 1200x700x600 mm, measuring accuracy: MPEe = (2.2 + U350) µm, MPEp = 2.5 µm. Includes a base frame with integrated dual passive vibration damping, highly precise granite guideways, bellows covers. Automatic rotary swivel head RTP20 from Renishaw, with TP20 probe. Probe changer magazine MCR202. Probe module TP20 Standardforce (Serial No.: MCR20 39E429, TP20StdF 49F352, TP20 StdF: 11C613). Measuring software ThomControl. TERRA PC Business 7000 i7. One-hand joystick MCU-Lite from Renishaw. CNC control UCC-T3 PLUS. Knjdpfxjzl Ebhj Aqrec

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, Pressing height 140 mm Pressing force 70 kN (7 t) Pneumatic drive Power supply 230 V, 1~, 50/60 Hz Compressed air supply 7 bar Air consumption per working cycle 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 545 kg Knodpfx Aozxc Rmsqrsc For pressing profiles with large dimensions with the highest quality requirements The machine is easy to adjust and operate and has short changeover times thanks to a simple blade-changing system Extremely high pressing force due to large-volume bellows cylinder (maintenance free) With retractable, hydro-pneumatically controlled counter bearing The specially-designed counter bearing head allows pressing of frames with an inner dimension starting at 150 mm (clear dimension) The pressing depth can be set separately for each tool carriage An adjustable pressing blade is also available to compensate for the profile chamber offset (-5 to 15 mm as standard, 15 to 35 mm as an option) Support arms and pressing blades included as standard 2-hand operation

Condition: used, Year of construction: 1972, functionality: fully functional, machine/vehicle number: 1307-62, total height: 1,600 mm, total length: 1,360 mm, total width: 610 mm, grinding wheel diameter: 175 mm, overall weight: 670 kg, grinding length: 500 mm, grinding spindle speed: 4,350 rpm, travel distance X-axis: 500 mm, travel distance Y-axis: 225 mm, travel distance Z-axis: 230 mm, grinding spindle motor power: 550 W, table length: 800 mm, table width: 165 mm, power: 0.55 kW (0.75 HP), disc diameter: 175 mm, Semi-automatic tool grinding machine with infinitely variable table drive. Machine inspected, grinding motor newly fitted with bearings. Grinding spindle of newer design without disturbing noises (repairable). Bellows in good condition, cross bellow new. Clamping surface undamaged. Electrical system inspected. For further details, see operating manual. Knedpfxoytq Abj Aqroc

Condition: used, mileage: 835,205 km, power: 331 kW (450.03 HP), first registration: 02/2019, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2027, brakes: retarder, color: yellow, gearing type: automatic, emission class: euro6, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Scania R 450 A4x2NA SZM FIN: 9252276 Chassis / Components: * Wheelbase: 3,750 mm * Full / Air suspension (2 bellows) * Tires: Front: 385/55 R.22.5, Rear: 315/70 R.22.5 * Remaining tread depth: Front: approx. 60/50%, Rear: approx. 30/20% * 1 x Aluminum fuel tank 600 L * 1 x AD-Blue tank * 1 x Hydraulic tank Cab: * CS 20 H * 2 x Bunks * Refrigerator * Automatic climate control * Stationary air conditioning * Auxiliary heater * Scania Infotainment Premium * Aux, USB, BT * Skylights / LED * DAB * Scania AEB = Emergency Braking Assist * Scania ACC = Adaptive Cruise Control * LDW = Lane Departure Warning Engine / Transmission: * 12,742 ccm // 450 hp / 331 kW // EURO 6c * Scania Retarder * Opticruise / Automatic with 2 pedals * Differential lock Weights: * Gross vehicle weight: 18,000 kg * Unladen weight: 7,998 kg * Payload: 10,000 kg Other: * German vehicle * 1 previous owner * MOT (TÜV) valid until 08/27 ---- New main inspections / safety checks or weight reductions / increases are possible upon request. We will gladly assist you in obtaining export / transfer license plates. We can also arrange for the transport of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for printing & typographical errors, changes, prior sales and errors reserved! ---- Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a large number of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in buying or selling vehicles. Convince yourself! Our service for you: Loading of vehicles We will gladly assist you with the loading of your purchased vehicles. Organization of special transports We will gladly assist you in organizing special transports. Temporary license plates / export license plates We will gladly assist you in obtaining export license plates / short-term license plates. Handling of customs formalities We will gladly assist you in handling customs matters. Knodpe Abbi Dsfx Aqroc

Year of construction: 2020, condition: used, Manufacturer: KAPP Kjdpfjz Iubtox Aqrsnc Model: KF3-1500-1 Year: 2020 Type: shell-and-tube heat exchanger / tubular heat exchanger Condition: new (declassified) – never put into production. Material: 316L stainless steel Heat transfer surface area: 2 m² Original working fluid: steam, Group 2 (tube) / 70 per cent glycol, Group 2 (shell) Operating pressure: -1/8 bar (tube) / -1/6 bar (shell) Operating temperature: 180 °C (tube) / 150 °C (shell) Test pressure: 17.6 bar (tube) / 16.3 bar (shell) Volume: 7 L (tube) / 10 L (shell) A bundle of around thirty tubes, flanged tube sheet Heat exchanger with expansion joint (bellows) Flanged connections on the heat exchanger side (inlet and outlet) 2 stainless steel mounting brackets Unladen weight: approximately 50 kg

Condition: excellent (used), For sale: a legendary, German-made WEILER Matador precision lathe (accuracy class according to DIN 8605 for toolrooms). The machine was imported from Germany and is in beautiful, original condition (original paint, no signs of industrial wear). The machine underwent rigorous technological tests under power – it is 100% functional, and the accuracy and repeatability achieved during test turning over the length of the shaft resulted in a difference of only 0.02 mm! The bed and lead screw are in perfect condition, which guarantees the precision for which the Weiler brand is known. This is an extremely compact version, ideal for precision model-making workshops, toolrooms, component refurbishment, or laboratories. Technical specifications: • Manufacturer: WEILER (Germany) • Model: Matador (VS1 series) • Swing over bed: 280 mm • Swing over cross slide: 160 mm • Distance between centers: 500 mm Kedpfx Aez I Ef Asqronc • Taper in tailstock: Morse 3 (MK3 / MT3) • Spindle speed range: 30 – 3550 rpm (16 spindle speeds – ideal for modern indexable inserts) • Chuck: 160 mm Very extensive equipment included in the price: 1. Original Haidenhain digital readout (DRO): Factory-installed display system with scales, 100% functional and reading the axes. 2. Quick tool change system (Multifix): Original quick-change tool holder with a tool block. 3. Set of additional change gears: A complete set of gears for configuring the change gear mechanism for custom feeds/threads. 4. Tailstock equipment: Precision rotating center included. 5. Starter kit: Basic set of turning tools, allowing you to start working immediately. 6. Safety: Complete guard for the work area above the chuck, and factory-installed, bellows-type guards for the screws and lead screw. Logistics: • The machine can be fully tested and the accuracy tests can be repeated on-site under power. • LOADING INCLUDED IN THE PRICE – I provide safe and professional loading of the machine onto your transport using a forklift. Price: 24,200 PLN net (negotiable). VAT invoice provided.

Condition: excellent (used), 1 roller table 3.0 m long x 0.77 m wide with 7 support rollers, with pneumatic lifting/adjustment chain with worm gear and bellows cylinder, with a timber transfer roller carriage with rubber turntable for 1-man timber feed, with 2 lift-up stop rollers for planks from the band saw that have already been trimmed on one side. 1 roller table 3.5 m long x 0.77 m wide with 8 support rollers, with or without transfer roller carriage. Kjdpfxot E Nw Tj Aqrsnc Original PAUL roller tables in various widths and lengths, available in standard or heavy-duty versions for use in front of cross-cut, trimming and re-cutting circular saws; short work tables allow, for example, the transfer of material from the cross conveyor, passage through the table assembly or the loading of heavy beams by forklift; long work tables are also available in various dimensions

Condition: like new (used), Year of construction: 2023, functionality: fully functional, total height: 5,300 mm, ram adjustment: 150 mm, installation height: 570 mm, total width: 3,300 mm, total length: 5,250 mm, pressing force: 250 t, type of input current: three-phase, stroke length: 35 mm, input voltage: 400 V, distance between side stands: 820 mm, overall weight: 58,000 kg, control voltage: 24 V, input frequency: 50 Hz, HR 250/2200 SL – Punching Line (Demonstration and Trial System) Press frame + ram in cast design with optimal damping properties Turnkey complete system for: • Production of electrical sheet metal parts • Flat stamped parts • Flat progressive die-cut parts EQUIPMENT + ACCESSORIES: • Punching machine HR 250/2200 SL [ZEULENRODA] 2,500 kN | Stroke rate 80…250 min-¹ >also available without accessories/peripherals upon request< • Roller feed “push-pull”, [ZEHNDER & SOMMER] • RAZIOL roller strip lubricator • Strip thickness measuring device • Punching package control [UNIDOR / TRsystems] Kedpfezu Ryhjx Aqronc • Unwinding reel 3.0t [KOHLER] • 21-roll fine leveling machine, deburring attachment [KOHLER] • Motorized tool changing system with hydraulic lifting bars + insertion clamp • Scrap and parts removal • Servo punching shear • Control cabinet platform • Operator platform • Soundproof cabin • Safety fence TECHNICAL DESIGN: Stroke rate of the press: 80 - 250 min-¹ Ram stroke: 35 mm Quick lift: 75 mm Installed height: 570 mm at max. stroke (fixed 35 mm) at the bottom, ram adjustment (150 mm) at the top Table surface: 2300 x 1100 mm Clamping plate: 2300 x 1100 mm T-slots DIN 650: 22 mm Table opening: 2020 x 400 mm Ram surface: 2240 x 900 mm Ram stroke, fixed: 35 mm Quick lift: 75 mm Height above floor: 1380 mm (including clamping plate 200 mm) Strip inlet height: 200 - 400 mm (above the clamping plate) Stand opening, side: 820 x 500 mm (W x H) Recommended max. upper tool weight: 2200 kg Recommended upper tool weight: 1950 kg - Control system SIEMENS S7-1500 - 15’’ touch panel + two-hand control panel - Remote maintenance DESCRIPTION: - Press frame in gray cast iron design - Press ram in cast design - Direct drive with electro-pneumatic clutch-brake combination - Fully eccentric two-point eccentric shaft, forged - Power transmission via two connecting rod joints - Roller guide, 8-fold for precise ram guidance - Rotating mass balancer - Ram weight compensation by means of pneumatic bellows cylinder - Quick Lift 75 mm (quick lift function for fast tool access) - Condition monitoring (forces, temperatures, lubrication, pneumatics)

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller manufacturer: selca, controller model: selca 1200, spindle speed (min.): 1,000 rpm, spindle speed (max.): 4,000 rpm, spindle nose: BT40, input voltage: 380 V, type of input current: three-phase, CB Ferrari milling machine in excellent condition. Used exclusively for milling aluminum plates. Comes with: - 2 vises, 150mm jaw width, 400mm opening - SELCOM serial communication program - Control parameter backup - Electrical diagrams - Selca 1200 manual - Programming manual Control batteries and electrical panel cooling fan have just been replaced. Z-axis bellows needs to be replaced. Knedpfxjz Nwwhe Aqroc

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, machine/vehicle number: 21334, The ideal machine for curtain wall elements For pressing profiles with large dimensions with the highest quality requirements The machine is easy to adjust and operate and has short changeover times thanks to a simple blade-changing system Extremely high pressing force due to large-volume bellows cylinder (maintenance free) With retractable, hydro-pneumatically controlled counter bearing The specially-designed counter bearing head allows pressing of frames with an inner dimension starting at 150 mm (clear dimension) The pressing depth can be set separately for each tool carriage An adjustable pressing blade is also available to compensate for the profile chamber offset Ksdpfxoz H Afws Aqrsnc EP 124 / EP 124/20 Pressing height 140 / 200 mm Pressing force 70 kN (7 t) Pneumatic drive Power supply 230 V, 1~, 50/60 Hz Compressed air supply 7 bar Air consumption per working cycle 35 l Length 1,100 mm, depth 950 mm, height 1,230 mm, weight 545 Kg We can ship the machine to your address via company DSV

Condition: excellent (used), Year of construction: 2004, operating hours: 29,000 h, functionality: fully functional, travel distance X-axis: 750 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 520 mm, controller manufacturer: Haidenhain iTNC 530, rotational speed (min.): 20 rpm, rotational speed (max.): 18,000 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 16,000 h, number of slots in tool magazine: 92, Equipment: chip conveyor, documentation/manual, 5-axis machining center Travel ranges: x = 750 mm, y = 600 mm, z = 520 mm Spindle speed range: 20 – 18,000 rpm Tool holders: HSK63 Laser tool measurement system integrated in the machine High-pressure internal cooling through the spindle center, 40 bar Tool magazine with 92 positions Year of manufacture: 2004 General overhaul: 2021 The following was done during the overhaul: Ksdpfx Aozz Ahqoqrsnc Hydraulic lines replaced Linear guides and ball screws in the x, y, and z axes replaced, including bearings and timing belts Scrapers and bellows replaced Most recently (2026): Z-axis servo motor repaired Hydraulic unit for lubrication replaced AC servo controller for the x-axis replaced The machine is equipped with a 3D probe and a band filter.

Condition: used, Year of construction: 2015, input voltage: 230 V, Equipment: CE marking, installation consisting of controlled compressors to regulate the pressure and expansion tanks with bellows C10.1-6 Connect 0.6kW 0/5bar C15.1-10 Connect 1.2 kW 0/10bar DU 500.10 - 500L 0/10bar CG 1000.10 - 1000L 0/10bar Knjdpfx Aszcdyfoqrsc CG 2000.6 - 2000L 6/8.6bar CG 2000.6 E - 2000L 6/8.6bar

Year of construction: 1992, operating hours: 100 h, condition: used, functionality: fully functional, Description Corner crimper for pressing profiles with a height of up to 68 mm. Extremely high pressing force achieved by a large-volume bellows cylinder (maintenance-free). The machine is easy to adjust and operate. Counter bearing pneumatically positionable with mechanical locking Support arms and pressing blades included as standard Two-hand operation for safe use Kjdjx Rvl Repfx Aqronc Options Additional support Special pressing blade Technical Data Pressing height: 68 mm Pressing force: 40 kN (4 t) Drive: Pneumatic Compressed air supply: 7 bar Air consumption per cycle: 30 l Dimensions (L × D × H): 650 × 820 × 1,270 mm Weight: 205 kg

Condition: used, total width: 30,000 mm, Year of construction: 2006, Equipment: ABS, Goldhofer STZ-H6-57/80A Telescopic Lowboy Trailer for Wagon Transport                                 Approval          Technical 1 Speed:      80 km/h                65 km/h Fifth wheel load:                23,000 kg              26,000 kg Rear axle load:        10,000 kg              11,000 kg Total weight:      83,000 kg              92,000 kg Payload:                  52,500 kg              61,500 kg Tare weight: (without accessories):          30,500 kg Gooseneck: Length: 4,000 mm Width: 2,480 mm Height: 235 mm Fifth wheel height: 1,350 mm DLR front: 1,420 mm DLR rear: 2,700 mm Kingpin: 3.5 inches Inclination: angled 10 degrees Front corners: angled 45 degrees Decking: Spruce 50 mm Fifth wheel supports: mechanical Width with sideboards: 2,550 mm Hydraulic STZ gooseneck with external beams, hydraulically raisable and lowerable Knsdpfx Aeyfvf Seqrjc with mechanical drop-side supports and hydraulic lowering cylinders Hydromechanical forced steering (2-circuit steering) in a flat design (height 235 mm) with adjustable guide elements and THP steering cylinders. Loading platform: Type: Platform Liftable: no Length: 13,000 mm Width: 3,000 mm Decking: Sheet metal/Spruce 50 mm Wheel recesses: no Extensions: no Extendable: single telescopic Length1: 10,000 mm Loading heights (loaded) Loading height 1: 815 mm Telescopic loading platform, designed as an outer and inner tube structure, with a 1,070 mm long, fixed loading platform section at the front. Integrated bolt-on coupling in the fixed loading platform section for connecting tank bridge extension beams; the welded track rails serve as a rail track in the track gauges of 1,000 mm (rail spacing 1,015 mm) and 1,435 mm (rail spacing 1,450 mm). Locking of the extension stages by means of spring accumulators and conical bushings Loading platform height on the frame center tube (outer tube) approx. 815 mm (+/- 130 mm) Loading platform height on the embedded rail elements approx. 790 mm (+/- 130 mm) Rear axle: Axle design: Standard Loading height, loaded: 815 mm Width: 3,000 mm Wheelbase: 1,360 mm Decking: Sheet metal Extensions: no Wheel recesses: no Excavator recess: no Axles: Number of axles: 6 Lift axle: see accessories Axle type: Steered stub axles Axle equalization: hydraulic Axle manufacturer: BPW/Eco Operating positions: 1 Axle travel (1) +/-: 130/130 mm Axle travel (2) +/-: 0/0 mm Raising/lowering valve: Yes 1st axle pneumatically liftable with lift bellows Steering: Number of steered axles: 6 Steered axle arrangement: all steered Maximum steering angle: 45° Steering type: Hydraulic 2-circuit Tires: Dimension: 235/75 r 17.5 143/141 J Tire type: Twin Rim type: Disc Rim centering: Center-centered Brake code: According to EU standard: Yes ABS: Yes ALB: Yes EBS: Yes with ABS connection spiral: No Parking brake: Spring accumulator EBS: No ECAS: No Note: Brake calculation no.: GH 4324S Chassis note: Steering designed for the extended state with a larger steering angle of the front axles Open wheel cutouts above the wheels with narrow transverse outriggers in between (aluminum covers, see accessories below) Control elements protected on the left in the direction of travel...

Condition: like new (used), functionality: fully functional, power: 367.75 kW (500.00 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 3,600 mm, number of beds: 2, Year of construction: 2024, Equipment: AdBlue, EBS, USB port, air conditioning, central locking, cruise control, electric window regulation, electronic stability program (ESP), fog lights, fridge, navigation system, onboard computer, parking heater, power assisted steering, power mirror, retarder, seat heater, second fuel tank, spoiler, start-stop system, tachograph, tire pressure monitoring, Selected equipment details: Cab paint: Frozen White Grille color: Black Fixed passenger seat Light-colored dashboard Auxiliary heater with warm air Technology package 4: automatic high beam and low beam switching, active brake assist with pedestrian detection, ACC with Stop & Go function electro-hydraulic power steering with three driving modes (Comfort, Balance, Direct) LED headlights Air horn CB radio antenna Sun visor 7.5-ton front axle Axle ratio 2.47 Voith Retarder VR 115CT Kjdpfx Aqjy Ulhvorsnc SAF fifth wheel coupling, saddle height 980mm, tires 315/60 R22.5, Bridgestone LRR Tank: 510 + 450 liters 4-bellow air suspension (rear axle) with spare wheel 3-year warranty on the entire vehicle (excluding wear parts - as per general terms and conditions) Errors and prior sale excepted, images show an example vehicle.

Condition: used, mileage: 572,148 km, power: 537 kW (730.12 HP), first registration: 04/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: violet, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, Scania R 730 A4x2NA CR20 N VIN: 2134635 Chassis / Attachments: * Wheelbase: 3,750 mm * Leaf / Air suspension (2 bellows) * Tyres: Front 385/65 R22.5, Rear 315/80 R22.5 * Remaining tread: Front: approx. 95% // Rear: approx. 40% * 1 x Aluminium fuel tank 400 L * 1 x AdBlue tank * 1 x Hyva hydraulic tank 140 L Cabin: * CR 20 N * Double glazing / Insulated safety glass * V8 leather package * 1 x bunk * Refrigerator * Automatic climate control * Auxiliary heater * Scania Infotainment Premium * Navigation * Aux, USB, BT * Lightfix lamp bar Lazer LED Knsdpfxezc Avrs Aqrsc * Skylights / LED * DAB * Scania-AEB = Emergency brake assist * Scania ACC = Adaptive cruise control * LDW = Lane departure warning * AICC = Distance-based adaptive cruise control Engine / Transmission: * 16,353 cc // 730 HP / 537 kW // EURO 6c * Scania retarder * Opticruise / automatic with 2 pedals * Differential lock * PTO Weights: * Gross vehicle weight: 18,000 kg * Unladen weight: 8,369 kg * Payload: 9,631 kg Other: * German vehicle * SP valid until 10 / 2026 --- New main inspections / safety inspections or changes to weight ratings (downrating/uprating) can be arranged on request. We are happy to assist you with procuring export/transfer licence plates, and delivery within Germany is also possible. Contact us! --- We speak German, English, and Russian! --- No liability for printing and typographical errors. Subject to alterations, prior sale, and errors! --- Who are we? Leible Nutzfahrzeuge is a family-owned business based in Kehl am Rhein. With many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge's particular strength is in the sales of new and used commercial vehicles. On 11,000 sqm you will find a wide selection of vehicles. Our company philosophy is characterised by fairness and integrity. As customer satisfaction is very important to us, we offer our clients an excellent full-service package and provide a competent contact person who supports them throughout the purchase or sale of vehicles. See for yourself! Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Arranging special transports We can help you organise special transports. Temporary / Export plates We can assist you in obtaining export/temporary licence plates. Customs clearance We are also happy to assist you with customs formalities.

Condition: used, loading space length: 190,000 mm, loading space width: 30,000 mm, loading space height: 8,150 mm, total width: 30,000 mm, Year of construction: 2006, Equipment: ABS, Goldhofer STZ-H6-57/80A Telescopic Lowboy Trailer for Railcar Transport                                 Approval          Technical 1 Speed:     80 km/h               65 km/h Fifth wheel load:               23,000 kg             26,000 kg Rear axle load:       10,000 kg             11,000 kg Total weight:     83,000 kg             92,000 kg Payload:                 52,500 kg             61,500 kg Tare weight (without accessories):         30,500 kg Gooseneck: Length: 4,000 mm Width: 2,480 mm Height: 235 mm Fifth wheel height: 1,350 mm DLR front: 1,420 mm DLR rear: 2,700 mm Kingpin: 3.5 inches Inclination: inclined 10 degrees Front corners: inclined 45 degrees Decking: Spruce 50 mm Fifth wheel supports: mechanical Width with sideboards: 2,550 mm Hydraulic STZ gooseneck with external beams, hydraulically raisable and lowerable with mechanical support tube and hydraulic support cylinders Hydromechanical forced steering (2-circuit steering) in a low-profile design (height 235 mm) with adjustable guide elements and THP steering cylinders. Loading platform: Type: Platform Ratable: No Length: 13,000 mm Width: 3,000 mm Decking: Steel sheet/Spruce 50 mm Wheel wells: No Extensions: No Extendable: single-telescopic Length 1: 10,000 mm Loading heights (loaded) Loading height 1: 815 mm Extendable loading platform, designed as an outer and inner tube construction, with a fixed loading platform section of 1,070 mm in length at the front. Bolt-tab coupling integrated into the fixed loading platform section for connecting railcar bridge extension beams; the welded track rails serve as a rail track in the gauge widths of 1,000 mm (rail spacing 1,015 mm) and 1,435 mm (rail spacing 1,450 mm). Locking of the extension stages by spring accumulator cylinders and conical bushings. Loading platform height on the frame center tube (outer tube) approx. 815 mm (+/- 130 mm) Loading platform height on the embedded rail elements approx. 790 mm (+/- 130 mm) Rear suspension: Suspension type: Standard Loading height loaded: 815 mm Width: 3,000 mm Kjdpjyfvypefx Aqrsnc Track width: 1,360 mm Decking: Steel sheet Extensions: No Wheel wells: No Excavator well: No Axles: Number of axles: 6 Lift axle: see accessories Axle type: Curved steering knuckle Axle equalization: Hydraulic Axle manufacturer: BPW/Eco Riding positions: 1 Axle stroke (1) +/-: 130/130 mm Axle stroke (2) +/-: 0/0 mm Raise/lower valve: Yes 1st axle pneumatically liftable with lift bellows Steering: Number of steering axles: 6 Steering axle arrangement: all steered Maximum steering angle: 45° degrees Steering type: Hydraulic 2-circuit Tires: Dimension: 235/75 r 17.5 143/141 J Tire type: Twin Rim type: Disc Rim centering: Center-centered Brake code: according to EU standard: Yes AGS: Yes ALB: Yes ABS: Yes with ABS connection spiral: No Parking brake: Spring accumulator EBS: No ECAS: No Note: Brake calculation No.: GH 4324S Suspension note: Steering designed for the extended state with a larger steering angle of the front axles Open wheel cutouts above the wheels with narrow transverse outriggers in between (aluminum covers see above Accessories) Controls protected on the left in the direction of travel...

Condition: used, mileage: 114,290 km, power: 265 kW (360.30 HP), first registration: 08/2018, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro6, total length: 9,550 mm, total width: 2,550 mm, total height: 3,580 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), * Our internal vehicle number: 1204 MAN TGS 28.360 * Faun Rotopress 518 Terberg Omnideka * Output: 265 kW * Emission standard: Euro 6C * Type: Waste collection vehicle * First registration: 08/2018 * Mileage: Original * From 1st German municipal ownership * Automatic transmission - D/N/R * FAUN Rotopress 518 - Superstructure * Terberg Omnideka - Tipping body * 265 kW / Euro 6C * Reflectors * Rear view camera * Air conditioning system * 6 seats = 2 single seats (driver / passenger) + bench seat for 4 people * Storage box on the outside, on the left-hand side * Digital tachograph Excerpt from chassis number recognition (All information without guarantee): Special equipment: Exterior mirrors and wide-angle mirrors electrically adjustable and heated, wide-angle mirror with electrically adjustable maneuvering aid, battery 225 Ah, battery disconnect switch mechanical, passenger seat comfort, air-suspended, curb mirror right electrically adjustable and heated, differential lock rear axle, digital axle load indicator for air-suspended axles, pressure sensor for air suspension bellows, ETA circuit breaker, cab: tilting mechanism electro-hydraulic, cab: with air suspension, driver's seat comfort, air-suspended and heated, with lumbar support, remote control central locking, flame starter system, flange coupling auxiliary drive elastically loose, windshield tinted and heated, tilting lever - brake EVBec controlled, automatic climate control, steering wheel with multifunction, air compressor 2-cylinder 720 ccm, air dryer heated, auxiliary heater Eberspächer D4S, auxiliary drive flywheel side, sun visor exterior, sound system, socket cab 12V and 24V, control module for external data exchange, bumper in steel design 3-piece, additional front / fog lights with cornering light Additional equipment: Axle configuration: 6x2, approach / front mirrors, trailer socket 24V / 7-pole, trailer socket ABS, anti-slip control (ASR), audio system: Radio MAN basic Line (Radio / CD), on-board computer MAN-Tronic, electronic braking system MAN-Brakematic, EURO 6 engine, cab: L, lower sleeper bunk with storage space, suspension: leaf / air, power windows, generator 28 V 80 A, transmission 16-speed - Type: ZF 16 S, lift roof mechanical, body / superstructure: chassis, tilting lever - brake EVB, fuel filter heated, fuel tank: combination tank - 400 L diesel + 60 L urea solution (AdBlue), air intake raised, engine 10.5 L - 265 kW diesel, trailing axle NO-08, liftable, spare wheel holder behind rear axle, disc brake rear axle, disc brake front axle, protective device side, side windows rear tinted, sun protection roller for windshield, spray mist reduction, stabilizer on one rear axle, stabilizer front axle, TGS, door windows tinted, underrun protection rear, underrun protection front, viscous fan, front axle VOK-09 arched, central locking, permissible total weight 26.0 t Note: Typographical errors excepted. The customer is obliged to independently verify the condition and equipment of the goods / vehicle! Ksdpfx Asz E T Tioqrenc All information without guarantee We reserve the right of prior sale We refer to our general terms and conditions.

Condition: excellent (used), Year of construction: 1986, functionality: fully functional, Universal milling machine Deckel FP4M with 3-axis digital display Heidenhain ND780 in special light gray paint finish with CE approval!!! Technical data: >> Year of manufacture 1986, machine no. 2203-2471 >> Fixed angular table (newly planed) >> Speed: 50 - 2500 rpm >> Feed rate: 8 – 630 mm/min >> Drive power: 3.7 / 4.4 kW >> Spindle brake >> Rapid traverse rate 1300 mm/min >> Travel ranges X/Y/Z: 500/400/400 mm >> Vertical milling head on spindle support, adjustable by 150 mm >> Vertical quill and horizontal quill - SK40 >> Vertical quill extendable by 90 mm >> Clamping system M16 >> Weight approx. 1500 kg Accessories and equipment: Knjdpfx Aoz A S Rnjqrec >> 3-axis digital display Heidenhain ND780 >> Coolant system >> Chip tray >> Central lubrication About the machine: Offered is a Deckel FP4M universal milling machine with CE conformity in very good condition. The machine has been partially overhauled, has little backlash, and all spindles move easily and smoothly. Even at maximum speeds, the milling machine runs smoothly. Rapid traverse in all axes, the bellows are all new. The fixed angular table has been newly planed. A reliable and user-friendly machine. An oil change has been performed. Mechanically and electrically inspected. The digital display from Heidenhain makes working easier and even more precise. Take the opportunity to inspect and test the machine on-site while it is powered up.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 5-axis Milling Machining Centre | Brand: MATEC | Type: 30 HV Year of manufacture: 06/2008 Range of components: Steel, cast and welded structures. The large X-axis and the head, which can be swivelled through 105° in either direction, are ideal for multi-sided machining of long profiles or shafts. The machine can be inspected under power by appointment. Condition: In working order / ready for use. Operating hours ((September 7, 2026): Control on: 76.085 h Machine on: 62.198 h Program run: 26.653 h TECHNICAL SPECIFICATIONS Travels: - X-axis: 3.000 mm - Y-axis: 800 mm - Z-axis: 1.100 mm - A-axis: +/- 105° - B-axis: 360° - 1-axis NC swivel head, swivels through +/- 105 degrees - Speed range: 20 - 9.000 rpm - Drive power of motor spindle increased: 30 kW * Torque max.: 190 Nm * Boring capacity in steel: ca. 60 mm * Milling capacity: approx. 500 cm3 * Thread cutting: M30 Kodpfx Aozyy Rmsqrsnc SPECIFICATIONS: - CNC control system: HEIDENHAIN iTNC 530 - NC rotary table, brand: KESSLER, embedded in the machine table, SKH-NC 6/800 * Horizontal faceplate,diameter: 800 mm * Direct measurement system for the NC rotary table * Part accuracy: : +/- 12" * Load capacity max.: 2,5 tons * Tangential torque with clamping: max. 6.500 Nm, incl. motor (AC) with integrated rotary measuring system, hydraulic clamping and incl. additional CNC axis - Clamping plate: Width / length: 835 / 3.500 mm Number of T-slots: 7 Slot width: 18-H8 - Amperemeter for the main spindle drive - Tool magazine: 48 positions - Additional tool magazine: 48 positions, including tool changer, specialised software and control panel for loading tools whilst the machine is running in automatic mode - Working area: * Rapid speed: 30 m/min * Feed rate: 30.000 mm/min - Spindle: * Cone/tool holder: SK40, DIN 69871 * Rotational speed: 9.000 / 30 kW - Internal coolant supply 40 bar (paper belt filter, tank capacity: 450 l) - High coolant pressure at the external nozzles High-pressure coolant pump, switchable via the M function in the parts programme to the external nozzles on the headstock, 20 bar. - Coolant supply flow monitor - Compressed air through the tool - Centralised oil lubrication - Oil mist extraction system - Direct measurement system: X, Y and Z axes - 3D measuring probe, brand: RENISHAW RMP 60, with radio signal transmission for control, including control software - Tool breakage detection - Tool length measurement - Fully enclosed work area with a roof; a completely enclosed work area. The loading doors are designed in such a way that loading by crane is possible at any time whilst they are open. - Safety fence fitted to the machine - Stronger linear guides for the Y-axis = 800 mm X = size 65, Y + Z = size 55 - Bellows with steel vanes - Rinsing gun - Electronic handwheel (portable), brand: HEIDENHAIN HR 410 - Chip conveyor - Workstation lighting (2-light) - Extraction system - Safety/machine guard glasses are being replaced - Compressed air refrigeration dryers - Documentation - CE marking Special features: - Zero-point clamping system - Swiveling head - The CNC rotary table, in combination with the swivel head, enables 5-sided or 3D machining of workpieces The sale does not include any clamping devices. Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -