Used Bellow for sale (179)

Condition: reconditioned (used), TOS FN 20 tool milling machine, geometrically overhauled in 2026. Universal tool milling machine, TOS Type/Model: TOS FN20 Condition: Used Geometrically overhauled in 2026, geometric protocol available Year of manufacture: approx. 1990s The machine was completely disassembled, thoroughly cleaned, geometrically overhauled, and repainted. Subsequently, it was professionally reassembled, and a comprehensive functional test was performed. The machine geometry was checked and adjusted. A test protocol according to DIN 8615 is available. As part of the work, the gib strips were also adjusted, and the coolant pump was overhauled. Technical data: Travel ranges (X/Y/Z): 300 mm / 200 mm / 350 mm Clamping surface (rotary table): approx. 240 x 600 mm Spindle mount: SK 40 (ISO 40) Speed range: 50 - 2,000 1/min (18 steps) Feeds: 8 - 400 mm/min (18 steps) Rapid traverse: approx. 1340 mm/min Power of main motor: approx. 3.5 kW Machine weight: approx. 1,000 kg Todpsz Sqq Hsfx Afgod Equipment including: - new 3-axis digital display - new bellow Inquiry item: Transportation costs will be provided in a separate quote.

Condition: new, maximum load weight: 32,969 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,900 mm, loading space width: 2,390 mm, loading space height: 1,690 mm, loading space volume: 27 m³, total width: 2,550 mm, total height: 3,430 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer SKS.Y 27 m³ Steel Tipper Body | BPW | Lift Axle | Cramaro | NEW Vehicle Description: For sale is a new Kässbohrer 3-axle steel semi-circular tipper with a 27 m³ payload volume. This vehicle is ideally suited for the transport of sand, gravel, excavated material, and other bulk goods. Technical Data: Kässbohrer SKS.Y / K.SKS B / 27-12/27 * 3-axle semi-trailer tipper * Payload volume: 27.0 m³ * Permissible total weight: 39,000 kg * Axle load: 27,000 kg * Kingpin load: 12,000 kg * Tare weight: approx. 6,031 kg * Loading length: 7,900 mm * Internal width: 2,390 mm * Overall width: 2,550 mm * Tipper body internal height: 1,690 mm * Saddle height: 1,220 mm * Overall length: approx. 8,675 mm * Vehicle height: approx. 3,430 mm Order_KB_254601-2 Order_KB_254601-2 Chassis / Axles: BPW AL II axles * 3 x 9,000 kg * Air suspension * Disc brakes * Lift axle on the 1st axle * Automatic EBS-controlled lift axle control * WABCO EBS 2S/2M * RSS stability control system * eTASC electronic/manual air suspension control * Automatic bellows discharge system when tipping * Tilt angle warning system in case of more than 3° inclination * Cathodic dip-coated chassis * High-strength S700 MC steel Order_KB_254601-2 Order_KB_254601-2 Tires: 385/65 R22.5 * Premium European tire brand, as selected by Kässbohrer * M+S tires * Steel rims ET 120 * 6 wheels Order_KB_254601-2 Tipper Body: Steel semi-circular tipper body * 27 m³ volume * Front wall: 4 mm HB450 * Side walls: 4 mm HB450 * Rear wall: 4 mm HB450 * Floor: 4 mm TUF500 * Mechanical rear gate with double hinge * 2-fold compression lock * Rubber seal on the tailgate Order_KB_254601-2 Tarp / Hydraulics: Cramaro Cabriole Type C Todpjz Ec Snofx Afgjd * Electric tarp system * Remote control * 300 mm arch height * 5-stage HYVA tipping cylinder * Max. working pressure 250 bar * Pneumatic operation * 2 m hydraulic hose Order_KB_254601-2 Additional Features: 2 work lights at the rear * Tire pressure monitoring system (TPMS) * Body-Fix system for stabilizing the tipper body * Plastic toolbox * 40-liter water tank * Document box * Folding aluminum underride guard * Aspöck Europoint III lighting * LED side marker lights * Automatic safety braking system when the tipper body is raised Order_KB_254601-2 Order_KB_254601-2 Order_KB_254601-2 Order_KB_254601-2 Color: Chassis: RAL 9005 Deep Black * Tipper body: RAL 9010 Pure White * Tarp: RAL 9010 Pure White We are available to answer any further questions you may have.

Condition: new, mileage: 5 km, power: 132 kW (179.47 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, loading space length: 4,800 mm, loading space width: 2,100 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, New German vehicle: * Euro 6 * 6-speed gearbox * Start/Stop * GVW 3,500 kg. * ABS + ESP + ASR * Driver airbag * Manual air conditioning * Central locking with remote control * Electric front door * Electric exterior mirrors * Trailer hitch with 3000kg towing capacity * All-weather tires Vehicle transporter - EPS4VA construction * Subframe and substructure made of aluminum profiles * Dimensions of loading area approx. 480 x 210 cm. * Own weight approx. 350 kg. * Full aluminum structure * Aluminum loading ramps approx. 220 cm long * Side marker lights (LED) orange * Side limit lights (LED) red / white * Cable winch Options on request: * Structure for double-tire chassis * Aluminum loading ramps approx. 200-220 cm inserted in sills behind the rear wheels * Cable winch with cable winch shifting. * Ball coupling behind the driver's cab * Additional socket behind the driver's cab, 7 or 13 pin * Additional air suspension, three-fold bellows with dual-circuit system, 2 pressure gauges with valve Tedpjnq Eh Asfx Afgsd * Compressor for additional air suspension * Storage box * Wheel stoppers / wheel chocks * Work lights * Light bar carrier * Light bar * LED work lighting integrated into the side of the loading floor * Trailer type Modello, 550x205, 3500kg, price on request Load securing also available from us: * Tensioning and lashing straps * Locking bars * High visibility vests * Transport boxes * Edge protection * Storage bags * Wheel stoppers * etc. Financing and leasing possible We manufacture bodies of any size on any chassis. Tarpaulin, GRP sandwich, aluminum. visit us at: Bodies - Trailers - Advice - Financing Subject to errors and prior sale, no liability for printing and input errors.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 50977, travel distance X-axis: 5,500 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 90,000 m/min, feed rate Y-axis: 90,000 m/min, total length: 9,600 mm, total width: 6,500 mm, spindle speed (max.): 16,000 rpm, total height: 5,600 mm, table load: 20,000 kg, torque: 160 Nm, rotational speed (max.): 16,000 rpm, overall weight: 63,000 kg, warranty duration: 18 months, State-of-the-art linear motor milling machine in a compact GANTRY design with 5 CNC-controlled simultaneous axes, particularly suitable for efficient 5-sided machining of workpieces made of synthetic and composite materials, model-building block material, and aluminum, as well as for HSC machining of cast and steel materials. Travel ranges: X = 5,500 mm x Y = 3,500 mm x Z = 1,500 mm Tjdpfxsz I Rlze Afgsd Swivel milling head 15 with CNC-controlled A and C axes High-frequency milling spindle, HSK100A, 60 kW, 16,000 rpm, 160 Nm CNC control HEIDENHAIN TNC 7 80-position tool changer, chain magazine KSS and MMS Laser tool measuring system Wireless measuring probe RMP60 Bellows cover Equipment and further options available upon request. Available from August 2027!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 50940, travel distance X-axis: 2,200 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 90,000 m/min, feed rate Y-axis: 90,000 m/min, total length: 4,500 mm, table length: 3,500 mm, total width: 6,500 mm, spindle speed (max.): 24,000 rpm, total height: 5,600 mm, table height: 300 mm, rotational speed (max.): 24,000 rpm, overall weight: 34,000 kg, warranty duration: 18 months, State-of-the-art linear motor milling machine in a compact GANTRY design with 5 CNC-controlled simultaneous axes, particularly suitable for the efficient 5-sided machining of workpieces made of plastics and composite materials, model-making block materials and aluminum, as well as for HSC machining of cast and steel materials. Travel ranges: X = 2,200 mm x Y = 3,500 mm x Z = 1,500 mm Swivel milling head 15 with CNC-controlled A and C axes High-frequency milling spindle, HSK63A, 60 kW, 24,000 rpm, 60 Nm Tedpfoz I Rfbox Afgjd CNC control HEIDENHAIN TNC 7 68-position tool changer, chain magazine Coolant system and mist extraction system Laser tool measurement system Wireless measuring probe RMP60 Bellows cover Equipment and additional options available upon request. Available from August 2027!

Condition: like new (used), functionality: fully functional, machine/vehicle number: WFDFLT22001014840, empty load weight: 4,000 kg, maximum load weight: 16,000 kg, overall weight: 20,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, total length: 9,975 mm, total width: 2,550 mm, total height: 1,000 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Year of construction: 2026, Equipment: center pivot plate, Archive photos - actual vehicle may differ #Container locking system 2 pairs of locking hooks recessed into the floor Pneumatic actuation Low-tension locking system, clamping force 6 t per claw Genuine original for 30+ years 2-point internal container locking; skip containers with internal ridge not lockable (for skip containers with sub-frame to DIN 30722, rear-loaded) Note: push container fully flat at the front roller recess Longitudinal guide rails, laterally adjustable/removable, approx. 115 mm high Turntable with heavy-duty ball-bearing slewing ring 8 pairs lashing points, top/side, outer frame, 5 t each 7 pairs combi stake pockets, bolted ring eyes, 5 t each, outer frame, approx. 72x42 mm (usable w/ plug-in stakes; fitted stakes block 5 t eyes) 1 lockable plastic tool box, W=600 / H=425 / D=460 mm 1 open storage box for container net Turntable trailer towing gear Drawbar with certified 40 mm tow eye Lowerable Y-shaped drawbar, pneumatic raise/lower assist (for Absetzcontainer transport, rear-loaded) #Axles & suspension BPW or SAF drum-brake axles, manufacturer's choice Laser-aligned axles/running gear - reduces tyre wear and fuel use Tsdpfx Aezy Rw Rjfgod Axle grease points extended outward Air suspension with raise/lower valve Air-bellows pressure gauge #Wheels & tyres 235/75 R 17.5, manufacturer's choice Steel wheels, twin arrangement, factory silver TPMS to ECE R 141, shown via EBS on tow display, no truck install (pre-equipped; standard tyres only) #Braking system 2-line air braking system Spring-loaded parking brake Axle load detection via EBS CAN-bus, cab display; truck pre-equipped, no install (not a calibrated scale) Vehicle driving stability system Front Duomatic connection, with line to towing vehicle 24V EBS electronic braking system, front EBS connector and cable Caution: tow only with vehicles that guarantee ABS effectiveness #Electrics 24V LED multi-chamber lamps; yellow LED side lights; LED plate light (false diagnostics possible on some tow vehicles) Yellow LED side lights coupled with indicator (flashing side lights) 2 white LED front position lights 2 white/red LED rear outline marker lights 1 x 15-pin front connector, with connecting cable Parking sockets for electrics, air and EBS on the drawbar Additional rear LED work light, via reversing light LED beacon with mount, switched via sidelight (lamp removable) LED work lights both sides, via reversing light #Floor Steel floor Front roller recess in floor for skip containers 5,000-7,000 mm long Note: slight floor waviness possible due to welding distortion #Loading ramps Lockable storage space for loading ramps beneath the load bed 1 pr aluminium ramps ca. 3,000x450 mm, 14,000 kg/pair (not for steel chains/tyres; rear rail) #Country of registration / plates Country of registration: Germany With Dekra inspection and report (per §13 EG-FGV) Contour marking, reflective tape to ECE R 048, white sides/red rear

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, quill stroke: 60 mm, total height: 1,935 mm, total length: 2,000 mm, total width: 200 mm, rotational speed (max.): 2,500 rpm, rotational speed (min.): 50 rpm, type of input current: three-phase, overall weight: 1,445 kg, table length: 460 mm, workpiece weight (max.): 400 kg, table load: 400 kg, table width: 800 mm, year of last overhaul: 2013, warranty duration: 6 months, The machine was completely and professionally overhauled by us in 2013. We were able to repurchase the machine from a customer who had used it very little, and we fully serviced and inspected it. Control 3-axis - Active - Digital display HEIDENHAIN TNC 113 Speed 50 - 2500 rpm, geometrically stepped direct drive with 18 speed stages for maximum torque / milling performance Feed 6.3 to 630 mm/min, steplessly adjustable Tedpfx Afeyitxqsged Rapid Traverse 1.3 m/min Quill Extendable quill, vertical 60 mm, SK40 with M16 drawbar thread, optionally: with DECKEL - saw thread S20 x 2 Extendable quill, horizontal approx. 100 mm Axes X/Y/Z 500/400/400 mm Table Rigid angle table 800x460 mm Equipment • Vertical and horizontal spindle • Milling head manually swivels +/- 90° • Central lubrication Options • Z-axis bellows • Chip tray • Machine lamp • Universal table • Rotary table • Slotting head • Dividing attachment • Counter-holder • etc.

Condition: used, mileage: 114,850 km, power: 485 kW (659.42 HP), first registration: 09/2025, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 10/2027, brakes: retarder, color: red, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, R-sleeper cab CR 20 H Highline with 1 bed, SCANIA retarder type R 4700 D, original SCANIA auxiliary air conditioning system, automatic climate control, rain sensor, auxiliary heater, electric panoramic sunroof, exterior sun visor, premium driver's seat with air suspension, heated and air-conditioned, co-driver's seat with tilt adjustment, leather seats, electric windows (2-way), electrically adjustable and heated exterior mirrors, roof and side spoilers, aerodynamic side skirts, ABS, ESP, disc brakes with EBS, emergency brake assist, ACC - Adaptive Cruise Control, driver attention support, LDW - Scania Lane Departure Warning System, traction control, 12-speed SCANIA gearbox G 33 CM1 with 2-pedal Opticruise, auxiliary drive EG10R with 2-circuit tipping or sliding floor hydraulic system (switchable from low to high pressure), 570-liter aluminum tank on the left, 80-liter AdBlue tank, digital tachograph, LED headlights with automatic low beam, fog lights and additional high beam headlights in the front grille, on the cab roof and in the front bumper, LED daytime running lights and taillights, LED warning lights in yellow on the cab roof and in the front grille, work lights, air horns on the cab roof, instrument panel design "Luxury", onboard computer, digital Scania cockpit "Smart Dash", Stabo CB radio, multi-function leather steering wheel, refrigerator on the driver's side, central locking with remote control, exterior storage compartments on the left and right, air-suspended front axle and 4-bellow air-suspended rear axle, axle load indicator front and rear, ALCOA Dura Bright high-gloss polished aluminum rims, differential lock on the rear axle, wheelbase 3750 mm, technically permissible total weight 70,000 kg, well-maintained, 1st owner, like new overall condition! ! Original mileage (verifiable), Euro 6E engine (SCR Only), low noise, German vehicle with German documents, not a low-liner and not a mega semi-trailer tractor! Sale only to commercial businesses! All information without guarantee! Errors and prior sale reserved! ----More pictures will follow shortly! Vehicle is in transit! Todpfxez I Hf De Afgod

Condition: new, maximum load weight: 32,969 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,900 mm, loading space width: 2,390 mm, loading space height: 1,690 mm, loading space volume: 27 m³, total width: 2,550 mm, total height: 3,430 mm, Year of construction: 2026, Equipment: ABS, Kässbohrer SKS.Y 27m³ Steel Tipping Body | BPW | Lift Axle | Cramaro | NEW Vehicle Description: For sale is a new Kässbohrer 3-axle steel semi-circular tipping body with a loading volume of 27 m³. The vehicle is ideal for the transport of sand, gravel, excavated material and other bulk goods. Technical Data: Kässbohrer SKS.Y / K.SKS B / 27-12/27 * 3-axle semi-trailer tipper * Loading volume: 27.0 m³ * Permissible total weight: 39,000 kg * Axle load: 27,000 kg * Kingpin load: 12,000 kg * Tare weight: approx. 6,031 kg * Loading length: 7,900 mm * Internal width: 2,390 mm * Overall width: 2,550 mm * Tipping body internal height: 1,690 mm * Saddle height: 1,220 mm * Overall length: approx. 8,675 mm * Vehicle height: approx. 3,430 mm Order_KB_254601-2 Order_KB_254601-2 Chassis / Axles: BPW AL II axles * 3 x 9,000 kg * Air suspension * Disc brakes * Lift axle on the 1st axle * Automatic EBS-controlled lift axle control * WABCO EBS 2S/2M * RSS stability control system * eTASC electronic/manual air suspension control * Automatic bellows discharge system when tipping * Tilt angle warning system at more than 3° inclination * KTL-coated chassis * High-strength S700 MC steel Order_KB_254601-2 Order_KB_254601-2 Tires: 385/65 R22.5 * Premium European tire brand, at Kässbohrer's choice * M+S tires * Steel rims ET 120 * 6 wheels Order_KB_254601-2 Tipping Body: Steel semi-circular tipping body * 27 m³ volume * Front wall: 4 mm HB450 * Side walls: 4 mm HB450 * Rear wall: 4 mm HB450 * Floor: 4 mm TUF500 * Mechanical rear gate with double hinge * Double compression lock * Rubber seal on the tailgate Order_KB_254601-2 Cover / Hydraulics: Cramaro Cabriole Type C * Electric cover system * Remote control * 300 mm bow height * 5-stage HYVA tipping cylinder * Max. working pressure 250 bar Todpfez Ec Uiox Afgjd * Pneumatic operation * 2 m hydraulic hose Order_KB_254601-2 Additional Equipment: 2 work lights at the rear * Tire pressure monitoring system (TPMS) * Body-Fix system for stabilizing the tipping body * Plastic tool box * 40-liter water tank * Document box * Folding aluminum underrun protection * Aspöck Europoint III lighting * LED side marker lights * Automatic safety braking system when the tipping body is raised Order_KB_254601-2 Order_KB_254601-2 Order_KB_254601-2 Order_KB_254601-2 Color: Tipping body: Blue * Cover: Red We are happy to provide you with further information.

Condition: used, mileage: 500 km, power: 368 kW (500.34 HP), first registration: 08/2023, fuel type: diesel, energy efficiency: A, CO₂ emissions: 2 g/km, fuel consumption (urban): 25 l/100km, fuel consumption (extra-urban): 25 l/100km, fuel consumption (combined): 25 l/100km, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of seats: 2, Auxiliary heating, automatic air conditioning, multifunction steering wheel, disc brakes, differential lock, 78 liters AdBlue, Euro-6e emissions standard, Adaptive Cruise Control (ACC), AEBS (Advanced Emergency Braking System) emergency brake assist, armrests for front passenger seat, ASR (Anti Slip Regulation), automatic light function and rain sensor, COMFORT PLUS PACKAGE, roof and side spoiler, ECO-Roll, electro-hydraulic steering (EHPAS), electronic braking system (EBS), ESP (Electronic Stabilization Program), cab with electric tilt function, vehicle with optimized engine variant 2023, suspension: Air suspension with 2 air bellows, Transmission: 12-speed automatic ZF Traxon, Rear axle 12 To, Fuel tank 600 + 450 L, Refrigerator, LDWS (Lane Departure Warning System) lane keeping system, Engine Ford-Ecotorq 12.7L, Multimedia system with 7.2? Touchscreen & Truck Navigation System, Upper sleeper berth with storage box on the top rear wall, Premium driver's seat with air suspension and LW support, Wheel size: 315/70 R 22.5| 2.47 axle ratio, Wheel size: 315/70R 22.5, Radio and infotainment system, Wheelbase: 3,600 mm, Fifth wheel SAF 1,100 mm fifth wheel height, External sun visor, Tank side trim on both sides, Front axle 8.0 To, Predictive cruise control (route-based), ZF-Intarder Note Todpfx Afsvikqysgsd Despite careful checking of all our prices, errors can creep in from time to time. Some of these are caused by transmission errors in the systems of the various platform providers. However, errors on our part cannot be ruled out either. We would therefore like to point out that all information is provided without guarantee and does not constitute a legal claim. Nor can a price label be declared as part of the contract. If you attach particular importance to a specific feature of our property, please let us know when you sign the contract. Thank you for your understanding! - .

Condition: new, power: 169 kW (229.78 HP), fuel type: diesel, overall weight: 12,000 kg, axle configuration: 4x2, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, cruise control, traction control, permissible total weight: 12000kg, seats fabric, interior color anthracite, electronic braking system EBS, electronic stability program ESP, traction control system ASR, driver's seat with air suspension, radio, power steering, central locking, double glazing, CAB EXTERIOR - Day cab with steel bumper, tinted windows, and electric windows. Electrically heated main mirrors and wide-angle mirrors. Cab width 2130 mm. - Fuel tank made of plastic, 155 liters. - Cab with rubber suspension at the front / with coil spring at the rear. - Transparent sun visor on the outside in green above the windshield. - Halogen headlights with dual reflector and impact-resistant Lexan lens. - Headlight beam pattern for right-hand traffic. - Daytime running lights. - Fog lights mounted on the bumper. - Green tinted windows. - Main mirrors and wide-angle mirrors on the driver and passenger side. Curb mirror on the passenger side. - Electric adjustment of the main mirrors. - Mirror mounts for body width 2.50 - 2.60 m. - Front mirror complies with EU Directive 2003/97/EC for front field of view. - Camera on the rear of the vehicle for rear view. Camera images are displayed on a dedicated display. - Central locking with exterior light check function. Includes 2 remote controls and 2 keys with transmitter. AERODYNAMICS - The shape of the adjustable roof spoiler ensures aerodynamic streamlining between the cab and the body. - Long side fenders PAINTING - Cab color: E1980WHTE SUSPENSION AND AXLES - Front axle type 45N. Parabolic leaf spring suspension with shock absorbers and stabilizer. Technically permissible load 4.5 tons. - Single-reduction driven rear axle, type SR8.14, with electronically controlled dual-bellow air suspension, including shock absorbers and stabilizer. Technically permissible load 8.50 t. WHEELS AND TIRES - Front axle(s): tire size 245/70R17.5, wheel size 17.5 x 6.75. - Driven H Tjdpoz I Epzsfx Afgod

Condition: new, mileage: 5 km, power: 132 kW (179.47 HP), fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, loading space length: 4,800 mm, loading space width: 2,100 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, !!! The images shown are sample images !!! German new vehicle: * Euro 6 * 6-speed transmission * Start/Stop system * Gross vehicle weight: 3,500 kg * ABS + ESP + ASR * Driver airbag * Manual air conditioning * Central locking with remote control * Electric windows * Electric exterior mirrors * Towing hitch with 3,000 kg towing capacity * All-weather tyres Vehicle transporter body - EPS4VA configuration: * Subframe and understructure made from aluminium profiles * Loading area dimensions approx. 480 x 210 cm Tsdpfx Ajz Sitbjfgjd * Curb weight approx. 350 kg * Full aluminium construction * Aluminium loading ramps approx. 220 cm long * Side marker lights (LED) orange * Side clearance lights (LED) red/white * Winch Optional equipment available on order: * Body for dual-wheel chassis * Aluminium loading ramps approx. 200-220 cm, stowed in ramp compartments behind the rear wheels * Winch with lateral displacement * Ball coupling behind the driver’s cab * Additional socket behind the driver’s cab, 7 or 13 pin * Auxiliary air suspension, triple bellows with two-circuit system, 2 pressure gauges with valve * Compressor for auxiliary air suspension * Tool/storage box * Wheel chocks * Work lights * Lightbar carrier * Lightbar * LED work lighting integrated into the side of the loading platform * Trailer type Modello, 550x205, 3,500 kg – price upon request Load securing equipment also available from us: * Lashing and tie-down straps * Load bars * Safety vests * Transport boxes * Edge protectors * Dunnage bags * Wheel chocks * etc. Financing and leasing available. We manufacture bodies of any size for any chassis. Tarpaulin, GRP sandwich, aluminium. Visit us at: Bodies – Trailers – Consultancy – Financing Errors and prior sale excepted. No liability for typographical or input errors.

Condition: used, mileage: 144,405 km, power: 368 kW (500.34 HP), first registration: 08/2023, fuel type: diesel, energy efficiency: A, CO₂ emissions: 2 g/km, fuel consumption (urban): 25 l/100km, fuel consumption (extra-urban): 25 l/100km, fuel consumption (combined): 25 l/100km, color: white, driver cabin: other, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of seats: 2, Adaptive Cruise Control (ACC), ZF Intarder, auxiliary heater, automatic climate control, multifunction steering wheel, disc brakes, differential lock, 78-liter AdBlue tank, Euro 6e emissions standard, AEBS (Advanced Emergency Braking System) emergency brake assist, passenger seat armrests, ASR (Anti-slip Regulation), automatic light function and rain sensor, COMFORT PLUS PACKAGE, roof and side spoilers, ECO roll function, electronic braking system (EBS), ESP (Electronic Stability Program), cab with electric tilting function, suspension: air suspension with 2 air bellows, transmission: 12-speed ZF Traxon automatic gearbox, rear axle 12 t, fuel tanks 600 + 450 L, refrigerator, LDWS (Lane Departure Warning System), Ford Ecotorq 12.7L engine, multimedia system with 7.2" touchscreen & truck navigation system, upper sleeper bunk with overhead storage compartment at rear wall, premium air-suspended driver’s seat with lumbar support, tire size: 315/70 R 22.5 | 2.47 axle ratio, tire size: 315/70 R 22.5, radio and infotainment system, wheelbase: 3,600 mm, SAF fifth wheel coupling with 1,100 mm coupling height, external sun visor, fuel tank side panels on both sides, front axle 8.0 t, predictive cruise control (route-based) Note Tedpfewv Ap Hox Afged Despite careful verification of all our price labels, errors may still occur. In some cases, these are caused by transmission errors in the systems of various platform providers. We also cannot rule out mistakes originating on our part. Therefore, please note that all information is provided without guarantee and does not constitute a legal claim. A displayed price cannot be declared as a binding part of the contract. If you place particular value on a specific feature in our listing, please inform us of this when concluding the contract. We thank you for your understanding!

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,000 mm, loading space width: 2,430 mm, loading space height: 2,300 mm, loading space volume: 50 m³, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, KEMPF SKM 36/3 AK – 3-Axle Aluminum Tipper Semi-Trailer 50m³ – New Vehicle ----Vehicle Data Manufacturer: Fahrzeugbau KEMPF GmbH * Model: SKM 36/3 AK * Design: 3-axle tipper semi-trailer with aluminum box body * Target market: Germany * Permissible total weight: 36,000 kg * Axle load: 3 × 8,000 kg * Fifth wheel load: approx. 12,000 kg * Nominal coupling height, loaded: approx. 1,200 mm (technically possible 1,200–1,260 mm) * Loading length: approx. 9,000 mm * Loading width: approx. 2,430 mm * Body height: approx. 2,300 mm * Body volume: approx. 50.3 m³ * Total height: approx. 3,710 mm to loading edge (loaded) ----Paint / Design Chassis: Deep black RAL 9005 * Attachments: hot-dip galvanized and black powder coated * Axles and wheel hubs: black (KTL-coated) * Body: White aluminum RAL 9006 * Tarpaulin: Silver No. 911 (Mehler) * Contour marking on sides (white) and rear (red) according to EC directives ----Chassis and Running Gear Frame: High-quality welded construction from fine-grained steel, conically cranked (approx. 80 mm) * Axles: SAF INTRADISC plus Integral – offroad version, disc brakes Ø 430 mm * Lift axle: 1st axle fully automatic, liftable, with forced lowering when empty * Air suspension: Air suspension assemblies with small air bellows (300 mm), plastic covers * Air tanks: Aluminum version * Support legs: 2 aluminum drop legs, max. 24 t (2 × 12 t) * Mudguards: PVC half-shells with rigid spray suppression * Toolboxes: 2 pieces PVC, black, each approx. 660 × 500 × 460 mm * Side underrun protection: right side * Ladder: removable, aluminum, approx. 4,000 mm long * Access ladder: extendable at the rear (not UVV compliant) ----Underrun Protection and Rear Foldable steel underrun protection according to ECE R58.03 * With spring lifting aid and integrated tow eye * Continuous KEMPF splash guard with large reflective panel (200 × 1,130 mm) ----Lighting and Electrics Complete LED version according to ADR standard * Marker, position, reversing, and rear fog lights in LED * 2 LED work lights (left/right) * Cargo area lighting with switch and indicator lamp * 15-pin electrical connection * Round lamps with chrome rings * Without reversing camera Todpsxn Eb Hsfx Afgod ----Tires Rims: Alcoa Ultra ONE alloy wheels, Dura-Bright EVO, offset 120 * Tires: 385/65 R 22.5, brand according to Kempf's choice ----Braking System and Safety Electronic braking system (EBS) Wabco with RSS (Roll Stability Support) * ABS 4-channel (4S/2M) * Parking brake via spring-loaded cylinders * Axle load display via EBS CAN bus (display in cab possible) * Trailer information module SmartBoard (Wabco) * Tire pressure monitoring system (TPMS) according to ECE R141 ----Hydraulics Hydraulic front tipping cylinder (Hyva), operating pressure 190 bar, single-circuit hydraulic system * Smallest piston hard-chromed * Hydraulic connection: Edbro 1" quick coupling, screwed ----Superstructure / Body Aluminum rear tipper body made of hollow profiles * Front wall: 20° sloped, approx. 5 mm thick, with robust brackets for front press * Floor: approx. 7 mm thick, annealed aluminum * Side walls made of aluminum hollow profiles, continuous inner lining 2.5 mm, welded * Rear wall: straight, pendulum type, two-wing (2/3 left, 1/3 right), automatic pneumatic locking * Rear wall control: left switch (pendulum function), right switch (door function) * Grain-tight design * Slide: approx. 400 × 400 mm, lever operated to the left * Dust bag with adapter frame (hopper approx. 250 mm high) * Catwalk with handrail acco

Condition: excellent (used), 1 roller table 3.0 m long x 0.77 m wide with 7 support rollers, with pneumatic lifting/adjustment chain with worm gear and bellows cylinder, with a timber transfer roller carriage with rubber turntable for 1-man timber feed, with 2 lift-up stop rollers for planks from the band saw that have already been trimmed on one side. Tjdpfot E Nw Tox Afgsd 1 roller table 3.5 m long x 0.77 m wide with 8 support rollers, with or without transfer roller carriage. Original PAUL roller tables in various widths and lengths, available in standard or heavy-duty versions for use in front of cross-cut, trimming and re-cutting circular saws; short work tables allow, for example, the transfer of material from the cross conveyor, passage through the table assembly or the loading of heavy beams by forklift; long work tables are also available in various dimensions

Condition: used, mileage: 1,545 km, power: 368 kW (500.34 HP), first registration: 03/2026, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Mega - Ultra LowLiner Saddle height: 980 mm FROZEN WHITE - 7VTAWWA Retarder CB radio pre-installation, sun visor, LED, retarder, air horn, Technology Package 4 Cab paint: Moondust Silver Passenger seat fixed Without upper bunk Warm air parking heater Navigation system Electrohydraulic steering with three driving modes (Comfort, Balance, Direct) SAF fifth wheel, saddle height 980 mm, tires 295/60 R22.5, Bridgestone 4-bellow air suspension (rear axle) Light-colored dashboard Window film, 4-bellow air suspension, 980 mm, LowLiner, 355/50, FDR 2.31, Winter package with heated windscreen, sun visor, LED, retarder, air pressure horn, Technology Package 5 F-MAX F-MAX LL F-MAX L Wheelbase 3600 Saddle height 980 Front overhang 1450 Rear overhang 873 Total length 5907 Total cab length 2350 Overall height 3950 Overall width (without mirrors) 2540 - 2160 78 LITER SCR TANK Diesel tank 372 liters 600 LITER MAIN TANK Ground clearance front 269 Ground clearance rear 243 ConnecTruck Cruise control Lane keeping assistant Emergency brake assistant Axle load indicator Electronic Stability Program (ESP) Traction control (ASR) Eco Roll Differential lock Driver’s seat (high-quality upholstery) Parking heater ConnecTruck MaxCruise (predictive cruise control) Electric cab tilting system LED daytime running lights Maneuvering assistance lighting Fog lights and rear fog lights Automatic lighting Leather-covered steering wheel Steering wheel controls 8" instrument panel Multimedia system with 7.2" touchscreen External sun visor Roof spoiler Side skirts Side fairings Onboard internet Tedpfx Afsyvm Nwegjd

Condition: used, mileage: 545 km, power: 368 kW (500.34 HP), first registration: 03/2026, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Fifth wheel height: 1150 mm, FROZEN WHITE - 7VTAWWA, retarder, parking air conditioning, 385/55, final drive ratio 2.31, sun visor, LED, retarder, NH4C, side fairings, Technology Package 4. Cab paintwork: Frozen White. Co-driver's seat fixed, without upper bunk, warm air auxiliary heater, navigation system, electrohydraulic steering with three drive modes (Comfort, Balance, Direct). 4-bellow air suspension (rear axle). Light dashboard, window film, 4-bellow air suspension, 980 mm, LowLiner, 355/50, final drive ratio 2.31, winter package with heated windscreen, sun visor, LED, retarder, air horn, Technology Package 5. F-MAX F-MAX LL F-MAX L. Wheelbase: 3600 mm. Saddle height: 980 mm. Front overhang: 1450 mm. Rear overhang: 873 mm. Overall length: 5907 mm. Total cab length: 2350 mm. Overall height: 3950 mm. Overall width (without mirrors): 2540 - 2160 mm. Tjdpfx Afeyvm Iysgsd 78 LITER SCR TANK. Diesel tank: 372 liters. 600 LITER MAIN TANK. Ground clearance front: 269 mm. Ground clearance rear: 243 mm. ConnecTruck, cruise control, lane departure warning system, emergency braking assistant, axle load display, electronic stability program (ESP), traction control (ASR), Eco Roll, differential lock, driver’s seat (premium upholstery), auxiliary heater, ConnecTruck, MaxCruise (predictive cruise control), electric tilting mechanism for the cab, LED daytime running lights, maneuvering assistance lighting, fog lights and rear fog lights, light automation, leather-covered steering wheel, steering wheel controls, 8" instrument panel, multimedia system with 7.2" touchscreen, externally mounted sun visor, roof spoiler, side spoilers, side skirts, onboard internet.

Condition: excellent (used), Year of construction: 1987, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout, Special Paint Finish in Light Grey, CE Compliant!!! Technical Specifications: - Year of manufacture: 1987 Machine no.: 2203-2790 - Rigid angle table (freshly planed) - Spindle speed: 50–2500 rpm - Feed rate: 8–630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min - Travel X/Y/Z: 500/400/400 mm - Vertical milling head on column adjustable by 150 mm - Vertical and horizontal quill – SK40 - Vertical quill extendable by 90 mm - Drawbar thread: M16 - Weight approx. 1500 kg Accessories & Features: - 3-axis Heidenhain digital readout Tsdpfxsxctyae Afgjd - Coolant system - Chip tray - Central lubrication system About the machine: For sale is a Deckel FP4M universal milling machine, CE compliant and in very good condition. The machine has been partially overhauled, displays minimal backlash on the handwheels, and all lead screws move smoothly and evenly. Even at maximum speeds, the milling machine runs quietly. Rapid traverse is available on all axes; all bellows are new. The rigid angle table has been freshly planed. This is a reliable and user-friendly machine. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take advantage of the opportunity to inspect and test the machine under power on site.

Condition: used, mileage: 333,255 km, power: 206 kW (280.08 HP), first registration: 01/2008, fuel type: diesel, empty load weight: 9,010 kg, maximum load weight: 8,990 kg, overall weight: 18,000 kg, tire size: 295/80R22.5, axle configuration: 4x2, wheelbase: 3,875 mm, next inspection (TÜV): 02/2027, brakes: constant throttle, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro4, suspension: steel-air, number of seats: 3, loading space length: 4,000 mm, loading space width: 2,430 mm, loading space height: 600 mm, Equipment: ABS, air conditioning, cabin, central locking, crane, cruise control, differential lock, low noise, power assisted steering, traction control, trailer coupling, Vehicle location: Bovenden, Kz. Haus. 1x air suspension seat, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off, raised exhaust, differential lock, storage box, leaf-air suspension, trailer hitch with air and light connections, low-noise G1, underbody protection, swinging flaps, crane mounted behind cab, emergency stop, foldable, radio remote control, 5x hydraulic extensions, 1x mechanical extension, green environmental badge. Tjdpfx Afey Enxfoged Wheelbase: 3875 mm. Body: Meiller three-way tipper body, fold-down aluminum drop sides, spring-relieved, PK 10.501 D, radio control (remote control). Load diagram: 4.1m - 2,170 kg, 5.6m - 1,450 kg, 7.60m - 980 kg, 9.8m - 700 kg, 11.9m - 550 kg, 14m - 450 kg, 1x mechanical up to 16m - 370 kg! Weighing system, new general inspection (HU) and safety inspection (UVV), approx. €6,000 in repair work (air bellows, batteries, compressed air tanks, etc.), center seat, disc brakes on front and rear axles! UVV valid until 03/2027! Loading height approx. 1,360 mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Condition: used, axle configuration: 3 axles, loading space length: 90,000 mm, loading space width: 23,200 mm, total length: 109,300 mm, total width: 23,200 mm, Year of construction: 2024, = Additional Options and Accessories = - Air suspension, rear - Air suspension, front = Notes = Tjdpfxsz Rihbs Afgjd Krampe BB 900 / BigBody 900 188.00190.2000260 Tridem, air suspension, 34 t permissible total weight (axle spacing: 1,810 mm), tires: 710/50 R26.5 Michelin, dual-tube system, forced steering, hydraulic, 80 cm silage attachment, grain-tight silage attachment, plexiglass for viewing windows, silage attachment mounting, air suspension + bellows pressure gauge, colour scheme: 2-tone (body colour: green RAL 6018 / frame colour: grey RAL 7350) EU type approval Upon request, we will provide you with a leasing or financing offer; Mr. Mihm (Tel. will gladly assist you. Further information can be found on our website. Errors and prior sale are subject to change! Krampe BB 900 188.00190.2000260 Tridem, air suspension, 34 t permissible gross weight (wheelbase: 1,810 mm), Tyres: 710/50 R26.5 Michelin, Dual-tube system, Hydraulic power steering, 80 cm silage attachment, Grain-tight silage attachment, Plexiglass for viewing windows, Silage attachment fitting, Air suspension + bellows pressure gauge, Colour scheme: 2-tone (Body colour: green RAL 6018 / Frame colour: grey RAL 7350) EU Type Approval If you wish, we can provide you with a leasing or finance quote; Mr Mihm (Tel. will be happy to assist you. Further information can be found on our website. Subject to errors and prior sale! Steering axle = Further Information = Unladen weight: 9,400 kg Payload: 20,600 kg GVW: 30,000 kg Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. Tsdpfx Aeuxfu Njfgod - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: used, mileage: 330,125 km, power: 315 kW (428.28 HP), first registration: 04/2016, fuel type: diesel, empty load weight: 7,580 kg, maximum load weight: 11,420 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,600 mm, next inspection (TÜV): 05/2025, fuel: diesel, brakes: engine braking, color: black, driver cabin: other, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Year of construction: 2016, Equipment: ABS, additional headlights, air conditioning, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, onboard computer, soot filter, traction control, trailer coupling, Complete German trailer, from one owner, special low bed trailer from the premium manufacturer GLORIA, new price €174,000 net, ONLY 6cm loading height, extremely easy loading and unloading, thanks to fully automatic pivoting rear axle with remote control, suitable for almost all lowered sports cars, vintage cars, commercial vehicles, steerable rear axle via remote control, lift axle, extremely smooth driving behavior due to dead weight, NO excess width, low bed 5.5m x 2.0m, condition, see photos, body/structure: tractor unit, trailer coupling, total train weight 40,000kg, trailer socket 24V / 15-pin, axle load measuring device, Mercedes-Benz PowerShift gearshift, 12-speed gearbox - type: G 211-12, engine 10.7 ltr. - 315 kW R6 diesel (OM 470), EURO 6 standard, air conditioning, driver assistance system: Attention-Assist (fatigue detection sensor), driver assistance system: lane keeping assistant, driver assistance system: stability control assistant, residual heat utilization, fleet management system interface, cruise control, electric windows, fog lights with LED daytime running lights and cornering lights, comfort locking system, central locking with remote control, rear axle differential lock, rear axle ring gear 440, preparation/switch for lift axle on semitrailer/trailer, seats in driver's cab: functional passenger seat, seats in driver's cab: comfort suspension seat, seats in driver's cab: foldable driver's seat backrest, driver's cab: movable driver's cab entry, driver's cab: hydraulic tilting device, suspension: leaf/air, compressed air connection in driver's cab, seat cover/upholstery: fabric, work lights, electric outside mirrors. adjustable and heated, electronic brake system (EPB) with ABS+ASR, aluminum compressed air tank, medium compressed air unit, compressed air horn, tinted windshield (with band filter), urea tank (AdBlue): 60 liters, fuel tank: 290 liters aluminum, left, reinforced engine brake, frame lowering with bellows residual pressure control, disc brakes front and rear axle, stabilizer front axle Tsdov Dl Hropfx Afgsd If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false impressions about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is provided without guarantee. No liability is accepted for errors or incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: reconditioned (used), Year of construction: 1984, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 340 mm, quill stroke: 80 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 40 rpm, table length: 210 mm, table width: 600 mm, total height: 1,750 mm, total length: 1,400 mm, total width: 1,600 mm, rotational speed (max.): 2,000 rpm, rotational speed (min.): 40 rpm, overall weight: 850 kg, table load: 200 kg, warranty duration: 3 months, The machine underwent a factory or partial overhaul by us in 2026 and is in top condition. As part of the partial overhaul, a new brake motor was installed. Control System 3-axis – active – digital display HEIDENHAIN TNC 113 Spindle Speed 40–2000 rpm, geometrically stepped direct drive with 18 speed levels for maximum torque and milling performance Feed Rate 5 to 500 mm/min, infinitely adjustable Rapid Traverse 1.2 m/min Quill Extendable quill, vertical 80 mm SK40 with M16 drawbar thread, optionally with DECKEL saw thread S20 x 2 Todpfx Aeyi Amwefgjd Extendable quill, horizontal approx. 100 mm Axes X/Y/Z 300/150/340 mm Table Fixed angle table 600x210 mm Maximum table load: 200 kg Features • Vertical and horizontal spindle • Milling head manually swivelable +/- 90° • Z-axis bellows Options • Chip tray • Machine lamp • Universal table • Rotary table • Slotting head • Dividing head • Steady rest • etc.

Condition: used, gearing type: other, fuel type: diesel, mileage: 1,001 km, driver cabin: other, Vehicle location: Bovenden. Configuration: Two 9.0-ton trailer axles with drum brakes available! Axle includes air suspension bellows! Price per axle! ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to change, prior sale, and errors! Tjdpfx Asi Rm Tmjfged

Condition: used, mileage: 1,595 km, power: 368 kW (500.34 HP), first registration: 03/2026, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, gearing type: mechanical, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Coupling height: 1150 mm FROZEN WHITE - 7VTAWWA Retarder 4-bellow air suspension, 1200mm, 315/80, final drive ratio 2.47, CB radio pre-installation, sun visor, LED, retarder, NH4C, side trim panels, Technology Package 4 Cab paint: Moondust Silver Fixed passenger seat Without upper bunk Hot air auxiliary heater Navigation Electro-hydraulic steering with three driving modes (Comfort, Balance, Direct) 4-bellow air suspension (rear axle) Light-colored dashboard Window decals, 4-bellow air suspension, 980mm, LowLiner, 355/50, final drive ratio 2.31, Winter Package with heated windscreen, sun visor, LED, retarder, air pressure horn, Technology Package 5 F-MAX F-MAX LL F-MAX L Wheelbase 3600 Coupling height 980 Front overhang 1450 Rear overhang 873 Overall length 5907 Total cab length 2350 Overall height 3950 Overall width (without mirrors) 2540 - 2160 78 L SCR tank Diesel tank 372 liters 600 L main tank Ground clearance front 269 Ground clearance rear 243 ConnecTruck Cruise control Lane departure warning Emergency braking assistant Axle load indicator Electronic Stability Program (ESP) Traction control (ASR) Eco Roll Differential lock Driver's seat (high-quality upholstery) Auxiliary heater ConnecTruck MaxCruise (predictive cruise control) Electric cab tilt system LED daytime running lights Maneuvering assistance lighting Fog lights and rear fog lights Light automatic system Leather-wrapped steering wheel Multifunction steering wheel switches 8" instrument cluster Multimedia system with 7.2" touchscreen Exterior sun visor Roof spoiler Side spoilers Side skirts On-board internet Tedpfoyvm Nqex Afgsd