Milling machine

Deckel FP4M CE Konform

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Heidenhain Digital Readout, Special Light Grey Paint, CE Compliant!!! Technical Data: - Year of manufacture: 1984, Machine No. 2203-1429 - Fixed angle table (newly planed) - Speed: 50 - 2500 rpm - Feed rate: 8 – 630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min - Travel X/Y/Z: 500/400/400 mm - Vertical milling head on spindle carrier, adjustable by 150 mm Knsdpfxow N Sfvs Aagsd - Vertical and horizontal quill – SK40 - Vertical quill, 90 mm retractable - Drawbar system: M16 - Weight approx. 1500 kg Accessories and Equipment: - 3-axis Heidenhain digital readout - Coolant system - Swarf tray - Central lubrication About the machine: For sale is a Deckel FP4M universal milling machine, CE compliant, in very good condition. The machine is partly overhauled, with minimal play in the handwheels and all spindles move smoothly and evenly. Even at maximum speed, the milling machine runs quietly. Rapid traverse is available on all axes; all bellows are as new. The fixed angle table has been newly planed. A reliable and user-friendly machine. An oil change has been carried out. Mechanically and electrically tested. The Heidenhain digital readout allows for easier and more precise work. Take the opportunity to view and test the machine under power on site.

Condition: good (used), Year of construction: 1961, Heavy-duty lathe, turning machine, lathe, center lathe, center lathe -Condition of machine bed: very good condition -Machine bed: hardened -Manufacturer: Martin, lead screw lathe type DLZ 502 -Turning length: 2200 mm -Turning Ø over bed: 580 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 65 mm -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 320 mm Knjdpfx Aaewfpiloged -Tailstock mount: MK5 -Drive: 7.5 kW -Accessories: 4x bezels, tool holder, tools see photos -Dimensions: 1260/3720/H1260 mm -Weight: 2510 kg

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Universal Milling Machine Deckel FP4M with 3-Axis Active Digital Readout Heidenhain, Excellent Condition, CE Compliant!!! Technical Data: - Year of manufacture: 1992, Machine no. 2203-8449 - Fixed angle table - Spindle speed: 50 - 2500 rpm - Feed rate: 8 – 630 mm/min - Drive power: 3.7 / 4.4 kW - Spindle brake - Rapid traverse: 1300 mm/min - Travel (X/Y/Z): 500/400/400 mm - Vertical milling head traverseable on column - Vertical and horizontal quill - SK40 taper - Vertical quill extendable by 90 mm - Hydraulic drawbar system - Approx. weight: 1600 kg Equipment and Accessories: - 3-axis active Heidenhain digital readout - Coolant system Kjdpfx Aou Tuk Heagsnd - Chip tray - Central electric lubrication - Operating manual, spare parts drawings About the Machine: For sale is a Deckel FP4M Universal Milling Machine (Active) in very good condition. The machine has minimal backlash, and all slides move smoothly. Even at maximum spindle speeds, the milling machine runs quietly. The machine features hydraulic tool clamping. The FP4M was only occasionally used in a state-run facility for training purposes. On this newer FP4 model, the feed rates are steplessly adjustable in all three axes, and each axis also features a rapid traverse. A major advantage is the active 3-axis digital readout. With the Heidenhain control, you can input measurements that the machine will approach automatically. Oil change has been performed; mechanically and electrically tested. The Heidenhain digital readout makes work easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.

Condition: used, Year of construction: 1975, Technical details: turning diameter over bed: 500 mm turning diameter over support: 260 mm turning length: 950 mm center height measured in bed: 220 mm centre distance: 1000 mm revolution per minute: 11,2 - 2240 / 24 step U/min spindle bore of work spindle: 62 mm tailstock quill adjustment:: 210 mm longitudinal feeds:: 0,045 - 1,6 mm/U - 32 step cross feed: 0,02 - 0,71 mm/U - 32 step total power requirement: 11 kW weight of the machine ca.: k.A. t dimension machine xH: 3,3 x 1,2 x 1,6 m Kodpfov A Sqhex Aagsnd The machine is in a very good condition (very quiet spindle run) in Leipzig. Top slide rotatable 360° 3-jaw lathe chuck Ø 315mm with jaws (inside/outside) for speed 2000 rpm. Thread cutting: metric, modular thread, inch Chip protection wall Chuck protection (mechanical) MULTIFIX steel holder with Ø 40mm drill steel holder Chip collection tray Coolant supply with pump Protective device for lead screw Machine base UVV is pre-equipped ( UVV=Accident Prevention Regulations) *

Condition: excellent (used), Four-jaw chuck make Roto Record type DHK 315 x 4 short taper size 8 taper diameter 139,735 Kjdpfx Aajg Rxh Iogond bolt circle diameter 171,4 mm diameter 315 mm Jaws individually adjustable

Year of construction: 1983, condition: good (used), machine/vehicle number: 2103, max. bore of chuck: 1 - 20 Ø mm max. boring diameter: 20 mm mm Knsdpfxjdnfz Ne Aagjd cap washer diameter: 100 mm cap washer rotation: ca. 4500 Upm engine: 380 V, 0,25 kW space needed: 600 x 450 x 1380 mm

Condition: new, The Turnado 230/2000 is a versatile and robust Conventional Horizontal Lathe from KNUTH, designed for various machining needs within the Engine Lathes product group. This modern version of the classic lathe features a heavily ribbed machine bed and a powerful main motor, providing high torque and a wide range of spindle speeds. It includes essential accessories such as a 3-jaw lathe chuck, a 4-jaw independent chuck, and an integrated coolant system, making it efficient for operational tasks. The user-friendly control panel ensures easy operation, while the high-quality spindle support delivers precision even under heavy loads. With a maximum workpiece length of 2,000 mm and a turning diameter of 460 mm, this machine is built to offer lasting high value and high productivity. You can request a quote to enhance your machining capabilities with the Turnado 230/2000, your ideal choice in the Conventional Horizontal Lathes category. Knjdpjp Ebgrefx Aaged

Condition: used, functionality: fully functional, spindle bore: 41 mm, turning length: 1,000 mm, Amutio Cazeneuve Lathe Model HB 500, 1000mm e.p. Max diameter on bed 500 mm, max diameter on cross slide 300 mm, shank hole 41 mm, 18 speeds from 25 rpm to 2000 rpm. With Fagor dimension display, with fixed and mobile rests, with protections, connected to 220 V Knsdpfx Aasv Rnfqeged

Condition: good (used), Heavy-duty lathe, turning machine, lathe, center lathe, center lathe -Manufacturer: Meuser, lead screw lathe type M-IV-S -Machine bed: hardened -Turning length: 3800 mm -Turning Ø over bed: 720 mm Knedpfx Ajwrfkfeaged -Turning Ø over support: 440 mm -Spindle bore: Ø 95 mm -Spindle speeds: 22.4 - 1000 rpm -Wedge bar chuck: Forkardt Ø 400 mm -Tailstock mount: MK6 -Drive: 18 kW -Accessories: 1x bezel, Multifix tool holder, tools see photos -Dimensions: 5930/1650/H1600 mm -Weight: 7500 kg

Condition: excellent (used), Heidenhain digital readout. Fehlmann cross table: KS 255. Knsdpfx Aovbzlroaged Accessories: available. Working range: Quill stroke Z-axis 110 mm Machine head travel 450 mm Table spindle nose 0 - 527 mm Quick-change systems SF 32 Work spindle 2.9 kW Speed range infinitely variable 50 - 6300 rpm Clamping surface 255 x 550 mm Dimensions and weight: Space requirement W x D x H 1.5 m x 1.35 m x 2.1 m Weight approx. 850 kg