Rolls bending machine - 3 Rolls

AKBEND ASM 140-20 / 4.0

Condition: new, sheet width 2050 mm plate thickness 4,5 mm pre-bending 4,0 mm min. dia. 210 mm roll diameter 140 mm weight of the machine ca. 1530 kg dimensions of the machine ca. 3220x1200x900 mm Standard features: - Central rollers via electric motor, planetary reduction gear and Gear drive driven - Swivel top roller Isdpfxeyvvrbs Abvoic - Main engine with brake device - Conical bending device - Mobile controller and foot pedal - CE mark / Declaration of Conformity Additional equipment: - motorized rear roller adjustment - Digital display for back roller - induction hardened rolls

Condition: new, Year of construction: 2024, Bending force: 320 t Year of construction: New (delivery time 6-8 weeks) Control: DT 15 bending length: 3050 mm distance between the columns: 2600 mm Y Fast speed: 160 mm / s Y Working speed: 10 mm / s Y Retraction speed: 140 mm / s Motorized crowning table length: 630 mm table width: 154 mm table height: 900 mm stroke: 365 mm Projection: 410 mm 2 support arms 2 Backgauge fingers Travel speed X-axis: 250 mm / s R-axis working speed: (max.) 140mm / s R-axis travel: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (double guide, aluminium) Software D-BEND for 3D bending simulation and alignment Manual crowning R axis, manual Backgauge with motor, linear guide and ball screw Iodpfxefifg Hs Abveic Backgauge with height adjustment (R-axis, manual) CE-die holding system (upper dies) Front support arms for sheets, sliding (with T-channel and stops) Hydraulic blocks and valves in special design, according to the worldwide applicable standards Electrical equipment, in accordance with the standards applicable worldwide Option: CE standard with manual fussler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4 axes) CNC motorized crowning Engine power 37 kW Oil tank capacity 250 lt length 4300 mm Width 1820 mm Height 3230 mm Weight approx. 17250 kg

Condition: new, Model Name Iijdpfx Asgvquwebvsc Shark 332-1 CCS

Condition: good (used), Year of construction: 2014, operating hours: 18,520 h, Single-shaft shredder, especially suitable for secondary shredding and granulation of pre-shredded material. Application: Commercial waste for thermal or material recovery, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Control cabinet; complete with ABB frequency converter, Recooler Operator panel Hopper Iedpjwxmb Eefx Abvoic Drive motors: 200 kW Hydraulic unit: complete Total weight approx. 21 t Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Inspection: possible upon arrangement. Delivery time: immediate.

Condition: excellent (used), SK 50 holders (28627) Various manufacturers: Bilz Kelch Sandvik Clarkson Iisdpowl U Tcefx Abvjc Approx. 90 pieces

Condition: good (used), Year of construction: 1993, HENKE VARIANT 140/120, dual-feed machine, year of manufacture 1993, 2 moulds, new control system Iijdexl S Uhjpfx Abvec

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, overall weight: 30,000 kg, rotor diameter: 800 mm, rotor length: 1,200 mm, power: 250 kW (339.91 HP), Universal granulator, impact granulator. Drive power: 250 kW, control cabinet with frequency converter (year of manufacture 2019). In 05/2023, the rotor shaft was replaced with an exchange shaft, including new bearings and seals. Rotor length: 1200 mm Rotor diameter: 800 mm Iedpfx Abew Am Nqevsic Number of knives/rotor: 36 pcs Number of knives/stator: 4 x 6 pcs 2 hydraulically swiveling stators, each with 2 rows of counter knives. Fine adjustment of the knives is performed hydraulically while the machine is running. Function 2: Coarse adjustment of the stators by 180° Hydraulic pusher Bearing temperature monitoring Central lubrication system for rotor bearings Net weight: 29,800 kg Year of manufacture: 2004, overhauled in 2025, all wear parts were renewed. The granulator has been overhauled and workshop tested, and is delivered ready for connection. Testing/demonstration available by appointment upon request.

Condition: new, Year of construction: 2026, roller (bottom) diameter: 220 mm, roller (top) diameter: 220 mm, side roll diameter: 180 mm, roller diameter: 220 mm, roller length: 2,070 mm, sheet thickness steel (max.): 10 mm, empty load weight: 4,500 kg, - 4 rolls - Capacity: 2070 x 10 mm - Bending capacity: 2070 x 8 mm - Hardened rolls - Top roll diameter: 220 mm - Bottom roll diameter: 220 mm - Side roll diameter: 180 mm - Hydraulic - Digital display for left roll movement - Digital display for central lower roll movement - Digital display for right roll movement - Hydraulic up and down movement system with intermediate and central roll - Hydraulic indicator for easy roll positioning - Hydraulic up and down movement system with intermediate and central roll - Top roll hydraulically swing-out - Steel construction ST-52 - Hydraulic drop-end for easy roll positioning - Hydraulic up and down movement system with central and side rolls - Hydraulic balancing system - Overvoltage protection Isdpfxsr H Df Io Abvsic - Documentation - 400V

Condition: as good as new (ex-display), Year of construction: 2026, sheet width 1550 mm plate thickness 6.5 mm pre-bending 4.5 mm diameter of upper rolls 150 mm side roll diameter 130 mm diameter of lower rolls 150 mm distance max. OW zu UW 20,0 mm total power requirement 2.2 + 1.5 kW weight of the machine ca. 2370 kg. range L-W-H 3300 x 1150 x 1110 mm Exhibition machine - NEW Iiedpfsxabkbox Abvoc not yet in use (!!) Special price on request Equipment: - electro-hydraulic 4-roller round bending machine * with driven top roller + bottom roller * stable welded construction - Area of application: * light to heavy sheet metal processing (steel/aluminum/stainless steel) - electro-hydraulic adjustment of the bottom + side rollers - linear guidance of the side rollers - top roller driven by robust electric motor + planetary gear - freely movable, separate control panel - hardened rollers SAE 1050 (CK 45) + crowning - conical bending device - 3x axis digital display for precise roller positions - electro-hydraulic folding bearing - operating instructions (PDF)

Condition: used, functionality: fully functional, Single-toggle jaw crusher Feed opening: 1,000 x 200 mm with smooth crushing jaws Isdpfow U Thcsx Abvjic optional: with electric motor and/or with steel subframe