Used Wiedenluebbert Car Construction for sale (48,572)

Condition: good (used), functionality: fully functional, overall weight: 39,000 kg, empty load weight: 7,200 kg, maximum load weight: 31,800 kg, axle configuration: > 3 axles, loading space length: 13,700 mm, loading space width: 2,550 mm, loading space height: 800 mm, first registration: 10/2019, suspension: air, color: traffic orange, tire size: 235.75 r 17.5, Year of construction: 2019, Equipment: ABS, Moeslin low-bed semi-trailer with gooseneck, used, with ramps, 3 axles with 3rd steering axle, air suspension, EBS, prepared for removable rear ramps, 120 cm front headboard, 5 ton side RUD collar hooks, twist locks for 20+20, 40 and 45 ft containers, 3 through cross-members for stanchion seats, 2 PVC toolboxes, ground clearance 84 cm, year 2019. Dealer: INTERDRIVE SRL-PARMA. Hsdpfx Afjxnqvcetsnu

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 20 h, Equipment: onboard computer, Mobile cement silo for big bags/bagged goods/loose goods; capacity approx. 3m³; with screw conveyor; electronic weighing system and vibrator, powered by a Honda 5kW unit, electronic control panel, fall protection, transport lugs Hsdpfeuldduex Aftsnu

Condition: good (used), functionality: fully functional, overall weight: 38,400 kg, empty load weight: 8,800 kg, maximum load weight: 29,600 kg, loading space length: 13,700 mm, loading space width: 2,550 mm, loading space height: 500 mm, first registration: 10/2008, suspension: air, color: traffic orange, tire size: 205.65 r 17.5, Year of construction: 2008, Equipment: ABS, Used De Angelis 4-axle low loader semi-trailer, year 2008, low-bed chassis with gooseneck and cut-outs between the neck and the 1st axle and between the 1st and 2nd axle with removable covers, detachable rear aluminium ramps, low deck 10m long, 4 twin axles with 3rd and 4th steering axles, deck height above cut-outs 80cm and below cut-outs 45cm, 16 tyres 205/65 R17.5, lashing rings on deck and hook-type side lashing points. DEALER: INTERDRIVE SRL-PARMA Hnsdsxnqmbjpfx Afteu

Condition: good (used), functionality: fully functional, overall weight: 36,800 kg, empty load weight: 9,500 kg, maximum load weight: 27,300 kg, axle configuration: > 3 axles, loading space length: 13,300 mm, loading space width: 2,550 mm, loading space height: 50 mm, first registration: 10/1998, suspension: air, color: red, tire size: 245.70 R 17.5, Year of construction: 1998, Equipment: ABS, Used low-loader semi-trailer with cradle bath, fitted with Bertoja winch, 3 twin-axles with 2nd and 3rd self-steering, air suspension, ABS, year 1998, central cradle with 5.50m effective loading length, loading height from ground 50cm, removable cover over axles, electro-hydraulic winch with hook on neck, aluminium sideboards on neck, stake pockets on deck and 8-ton lashing rings, provision for removable rear ramps, serviced until 30.04.2026 – DEALER INTERDRIVE SRL – PARMA Hnodpfx Afsxgumpeteu

Condition: excellent (used), functionality: fully functional, overall weight: 36,000 kg, empty load weight: 7,500 kg, maximum load weight: 28,500 kg, axle configuration: 3 axles, loading space length: 12,500 mm, loading space width: 2,500 mm, loading space height: 950 mm, first registration: 07/1986, suspension: air, color: red, tire size: 265.70 r 19.5, Year of construction: 1986, Equipment: tail-lift, Low-loader semi-trailer Piacenza, 3 double axles with air suspension, double electro-hydraulic rear ramps, length 12.50 m, loading deck length 8.80 m, ground clearance 90 cm, side lashing rings, year 1986, fully refurbished and ready for use, good tyres, inspected until 30/09/2025 – DEALER: INTERDRIVE SRL, PARMA. Hedpow Enmiefx Aftenu

Condition: good (used), functionality: fully functional, overall weight: 38,000 kg, empty load weight: 13,700 kg, maximum load weight: 24,300 kg, axle configuration: > 3 axles, loading space length: 8,800 mm, loading space width: 2,550 mm, loading space height: 72 mm, first registration: 07/2015, suspension: air, color: blue, tire size: 205.65 r 17.5, Year of construction: 2015, Equipment: ABS, sem rigaudo gooseneck used, 4 axles with 4 steering tridec from fifth wheel + 1st liftable, air suspension, abs, extendable frame of 6.0m additional, height from ground 72cm, double ramps in electro-hydraulic grid also adjustable in width, closed floor of 8.80m length, rud hooks on the floor with 9 tons of capacity, extractable sides on the neck, year 2015, vehicle with exceptional use up to 36.3 tons of useful, INTERDRIVE SRL-PARMA DEALER Hnodpfx Aowq Eixjfteu

Condition: like new (used), functionality: fully functional, overall weight: 40,000 kg, empty load weight: 10,500 kg, maximum load weight: 29,500 kg, axle configuration: 3 axles, loading space length: 13,700 mm, loading space width: 2,550 mm, loading space height: 85 mm, first registration: 10/2022, suspension: air, color: light blue, tire size: 245.70 R 17.5, Year of construction: 2022, Equipment: ABS, tail-lift, Komodo gooseneck ramp semi-trailer, year 2022, double electro-hydraulic grid ramps on all sides with horizontal movement, 10m platform with 85cm ground clearance, sides on the neck, side wideners, 7 ton side rud hooks + 9 ton platform hooks, tables for out-of-gauge loads, 3 axles with 3rd steering and 1st liftable, boarding ramps on the neck, wooden platform and reinforced sheet metal, 20 ton Hummer winch, INTERDRIVE SRL-PARMA DEALER Hsdpfjv Uq Hljx Aftjnu

Condition: used, overall weight: 47,500 kg, empty load weight: 9,800 kg, maximum load weight: 37,700 kg, axle configuration: 2 axles, loading space length: 12,600 mm, loading space width: 2,550 mm, loading space height: 500 mm, first registration: 09/1999, suspension: air, color: traffic orange, tire size: 245.70 r 17.5, Year of construction: 1999, Equipment: ABS, nooteboom cradle trailer, 2 axles with air suspension, ebs, 2 tridec steering axles from fifth wheel and adjustable by linkage, lower part 6.0m long x 50cm high from ground, adjustable and releasable neck, payload capacity up to 47.5 tons, year 1999, INTERDRIVE SRL-PARMA CINCESSIONARY Hjdspdqvlepfx Aftsnu

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 1301, I am offering for sale a Hundegger P-10 woodworking machine, designed for processing roof beams. The machine is fully operational and still in use; demonstration under power is possible. Maximum cross-sections: 260 x 400 mm. Year of manufacture: 1994. Included with the machine: - Under-table cross-cut saw - 2 marking pencils - 3 large milling cutters - 1 finger joint cutter - 2 drill bits + nail drill - 4 chain mortisers Service carried out on 10/6/2025. Hnodpjw I Emkefx Aftju A large number of spare parts are included. Please do not hesitate to contact me for more information.

Condition: ready for operation (used), machine for expanding and reducing tubes Hedpjwrt Tzjfx Aftonu 3 heads no tooling included (can be supplied on demand) Dimensions: 1500 x 2000 x 2000 mm Weight: 1600 kg

Condition: excellent (used), Year of construction: 2019, operating hours: 183 h, machine/vehicle number: 50810087309654, enginetype: Electric, manufacturer: Club Car Hnjdpow Rzd Refx Aftju

Condition: new, functionality: fully functional, Year of construction: 2025, A sand aggregate or gravel production plant is a facility where raw materials like sand, gravel, and other aggregates are processed to create various products used in construction and other industries. These facilities typically involve a series of processes to transform raw materials into the final products. Here is a general overview of the key components and processes involved in a sand aggregate or gravel production plant: 1. Mining and Extraction: - The process starts with the extraction of raw materials from quarries or mines. Heavy machinery such as excavators, loaders, and bulldozers are used to remove the raw materials from the earth. 2. Crushing and Screening: - The extracted raw materials often need to go through crushing and screening processes to reduce their size and separate them into different grades. Hedpfx Afoq Nia Istjnu - Crushers break down large rocks into smaller pieces, and screens sort the particles based on size. 3. Washing: - Washing is a common process to remove impurities such as clay, silt, and dust from the raw materials. This is particularly important for sand and gravel used in construction. 4. Grading and Sorting: - After washing, the materials may go through grading and sorting processes to separate them into different sizes and qualities. 5. Storage and Stockpiling: - Processed materials are often stored in stockpiles for further use. Adequate storage facilities are necessary to manage different grades of materials. 6. Conveying and Transportation: - Conveyor systems are used to transport materials between different stages of the production process. Transportation methods, such as trucks or conveyor belts, are used to move the final products to distribution points. 7. Quality Control: - Quality control measures are implemented to ensure that the final products meet the required specifications and standards. This may involve regular testing and analysis of the materials. 8. Environmental Considerations: - Sustainable practices and environmental considerations are crucial in the operation of a production plant. Measures such as dust control, water recycling, and rehabilitation of mined areas are often implemented to minimize the environmental impact. 9. Maintenance and Safety: - Regular maintenance of equipment is essential for the smooth operation of the plant. Safety measures are also critical to protect workers and ensure compliance with regulations. 10. Final Product: - The final products from a sand aggregate or gravel production plant may include various grades of sand, gravel, crushed stone, or other types of aggregates used in construction, concrete production, asphalt production, and other applications. It's important to note that the specific processes and equipment used in a production plant may vary based on the type of raw materials, the intended final products, and local regulations. Additionally, advancements in technology and sustainability practices may influence the design and operation of such facilities.

Condition: new, Year of construction: 2008, operating hours: 1 h, functionality: fully functional, machine/vehicle number: 1753, overall weight: 450 kg, operating pressure: 250 bar, total length: 1,420 mm, total height: 1,420 mm, type of input current: three-phase, total width: 900 mm, tank capacity: 160 l, input voltage: 380 V, pump capacity: 65 l/min, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, power: 18.5 kW (25.15 HP), delivery pressure: 250 bar, empty load weight: 450 kg, Location: Fohnsdorf, Austria Available immediately Hedpfxolhqdms Aftenu

Condition: ready for operation (used), machine for expanding and reducing tubes 1 head no tooling included (can be supplied on demand) Stroke: 150 mm Power: 11 kW Dimensions: 2200 x 800 x 1200 mm Hedpfx Ajwrt Tuoftsnu Weight: 500 kg

Condition: new, functionality: fully functional, Year of construction: 2025, Small stone jaw crusher with vibrating screen powdered by diesel engine Max input size: 210mm Capacity: 15-22 t/h Hnsdpsq I Nvisfx Afteu Output size: 0-5mm, 5-10mm, 10-22mm, 22-31mm Diesel engine: 28HP

Condition: ready for operation (used), machine for expanding and reducing tubes Hnsdpfjwrt Tnox Aftsu 2 heads

Condition: new, Year of construction: 2025, functionality: fully functional, power: 55 kW (74.78 HP), ### Introduction to Jaw Crushers A jaw crusher is a type of primary crusher used in mining and ore processing plants. It works by using compressive force to break down large rocks into smaller, more manageable pieces. The machine consists of a fixed jaw and a movable jaw, which together create a V-shaped cavity called the crushing chamber. The movable jaw exerts force on the rock by forcing it against the stationary plate, causing it to break. Key Components: - Fixed Jaw Plate: Mounted in a fixed position. - Movable Jaw Plate: Mounted on a pitman that moves in a reciprocating motion. - Flywheel: Provides the necessary inertia for the crushing action. - Toggle Plates: Serve as a safety mechanism, ensuring that the jaw crusher operates efficiently and prevents damage. ### Working Principle The working principle of a jaw crusher is based on the reciprocating movement of the movable jaw against the fixed jaw: 1. Feeding: Large rocks are fed into the top of the crusher. 2. Crushing: As the movable jaw moves back and forth, it crushes the material against the fixed jaw. 3. Output: Crushed material is discharged from the bottom of the crushing chamber. ### Applications of Jaw Crushers Jaw crushers are versatile and can be used in a variety of industries and applications, including: 1. Mining and Mineral Processing: - Primary crushing of mined ore (gold, copper, iron, etc.). Hnedpfeq Nf Tvjx Aftsu - Size reduction of rocks to facilitate further processing (e.g., milling). 2. Construction and Demolition: - Crushing of concrete, bricks, and other construction materials. - Recycling of building materials to create aggregate for new construction. 3. Aggregates Production: - Crushing of raw materials to produce aggregates for concrete and asphalt. - Production of road base and railway ballast. 4. Industrial Applications: - Crushing materials in chemical processing plants. - Size reduction of materials for production processes in various industries. 5. Environmental Management: - Processing of materials for landfill cover. - Recycling operations to reduce waste and promote sustainable practices. ### Advantages of Jaw Crushers - High Crushing Ratio: Capable of producing a range of material sizes with a single pass. - Durability and Reliability: Built to withstand heavy-duty use and harsh conditions. - Simple Structure: Easy to maintain and repair, with fewer components compared to other types of crushers. - Versatility: Suitable for various types of materials and a wide range of applications. - Energy Efficiency: Efficiently uses energy, making it cost-effective for operations. ### Examples of Use Cases - Mining Operations: Jaw crushers are used as primary crushers in mine sites to crush large rocks before being processed further in the milling process. - Construction Sites: Used to break down concrete and other building materials for recycling and re-use. - Aggregate Production: Integral in producing the base materials for construction and infrastructure projects. - Demolition Projects: Efficiently crushes and recycles materials from demolished structures. By understanding the introduction and applications of jaw crushers, businesses can make informed decisions about integrating this machinery into their operations for efficient and effective material processing.

Condition: new, Year of construction: 2025, Creating a cheap portable or mobile sand making plant involves optimizing costs while maintaining functionality and efficiency. Here's a basic outline of components and considerations for designing a cost-effective portable sand making plant: 1. Portable Sand Making Machine: - Select a cost-effective sand making machine that meets your production requirements. Consider factors like capacity, efficiency, and maintenance costs. - Look for options that offer good performance at a lower initial investment. 2. Screening Equipment: - Choose a portable screening unit to separate the sand into different sizes. This is crucial for producing high-quality sand with the desired particle size distribution. - Consider modular screening units that are easy to transport and set up. 3. Conveyor Systems: - Utilize conveyors to transport raw materials between different components of the plant. Opt for simple and reliable conveyor systems. - Explore cost-effective conveyor options that are easy to maintain. 4. Hopper and Feeder: - Incorporate a hopper and feeder system to ensure a continuous flow of raw materials to the sand making machine. This helps optimize the production process. - Choose a design that minimizes material spillage and wastage. 5. Power Source: - Consider energy-efficient power sources to reduce operational costs. This could include using generators or connecting to the electrical grid, depending on the availability and cost of electricity in your location. 6. Chassis and Mobility: - Opt for a simple and robust chassis design that allows for easy transportation. Depending on your needs, choose between wheels or tracks for mobility. - Aim for a design that facilitates quick setup and dismantling to save time and labor costs. 7. Control System: - Implement a user-friendly control system that enables operators to monitor and adjust the sand making process efficiently. - Consider automation features that enhance control and reduce the need for constant manual intervention. 8. Dust Control and Environmental Considerations: - Integrate effective dust control measures to comply with environmental regulations and ensure a safe working environment. Hodpfxjq N Ud Ie Aftsnu - Explore environmentally friendly features to align with sustainability goals. 9. Modular Design: - Consider a modular design for easy customization and scalability. This allows you to adapt the plant to varying production needs over time. 10. Used Equipment: - Explore the possibility of using refurbished or used equipment to cut down on initial costs. Ensure that the used equipment is in good working condition and can meet your production requirements. Remember that while cost optimization is important, it's crucial to maintain the quality and efficiency of the sand making process. Additionally, compliance with environmental regulations should be a priority. Always consider the specific requirements of your project and seek professional advice if needed.

Condition: used, Suction cup system for handling and loading goods, Sag brand, model CAR/E, used. Hnedpjwxdwwefx Aftsu

Condition: used, machine/vehicle number: 005934, Max. panel width: 2200 mm Max. panel length: 4200 mm Max. panel stack height from the ground: 1000 mm Hnjdpfx Afowcydbeteu Lifting capacity: 200 Kg Movement system: suction cups.

Condition: new, Year of construction: 2025, functionality: fully functional, power: 75 kW (101.97 HP), Jaw crusher for stone & ore crushing in quarry and mining fields Model: PE600X900 Max input size: 500mm Capacity: 80-135 t/h Motor: 75KW Weight: 15T Besides this models, we also have the other models like PE900X1200, PE500X750, PE250X400, PE400X600, etc, and we also have impact crusher, cone crusher, hammer crusher, vsi crusher, more important we can also provide complete stone crushing screening plant with capacity 30-1000 t/h, welcome to contact us for more details if you want a different model or the other type of crushing machine. You can leave us a message if you need a different model or a different type of crusher. Hnedpfxjq H Shce Afteu

Condition: used, machine/vehicle number: 005941, Max. panel width: 1200 mm Hnjdpfx Aowcycqoftsu Max. panel length: 4200 mm Max. panel stack height from the ground: 1600 mm Lifting capacity: 100 Kg Movement system: suction cups.

Condition: used, machine/vehicle number: 005948, Max. panel width: 1200 mm Max. panel length: 3200 mm Max. panel stack height from the ground: 1600 mm Lifting capacity: 100 Kg Hnjdpfx Afou T Tv Iotsu Movement system: suction cups.

Condition: used, machine/vehicle number: 005951, Max. panel width: 1200 mm Max. panel stack height from the ground: 1600 mm Hnodswcybtspfx Afteu Lifting capacity: 100 Kg Movement system: suction cups.

Year of construction: 2013, condition: used, Serial number: IMS-WA-1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21561 Specifications: 2013 model Capacity: 400 tons per hour Hedpfjxpdkpex Aftonu Length: 20 meters Height: 9.6 m New rubber belt installed 2 years ago, but very little use Owner had approval to drive on public roads Hydraulic support wheel Ready for delivery Own weight: Model: H-OCON MC1050-20WR Transportbånd