Used Small Part Shelf for sale (17,763)

Condition: reconditioned (used), modernized machine with new LTG StoreControl P control system External dimensions: Overall height: 5000 mm Overall width: 2650 mm Overall depth: 1250 mm plus 300 mm discharge table Bdsdsdnfdlspfx Ap Esf 34 carriers, each with a payload of 140 kg in the clear internal dimensions: H = 220 mm W = 2220 mm D = 410 mm Chain pitch: 254 mm Discharge table at 1000 mm above the top edge of the machine frame, with a wooden worktop Color: GRAY, surfaces cleaned, signs of use possible Motor power, drive: 1 x 1.8 kW / 400 Volt Subject to errors and technical changes Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: used, Belt Conveyor, Belt Conveyor System, MFP Conveyor Technology Machine No.: 17565 Year of Manufacture: 2018 Usable length: 3100 mm Belt width: 600 mm Belt length: approx. 6400 mm Frame profile height: 35 mm Deflection roller diameter: 20 mm Belt speed: 10 m/min to 45 m/min Bjdpjwrihnefx Ap Eodf Conveyor height: approx. 1120 mm Motor power: 140 Watts Power supply: 230 Volt, 50 Hz - Infinitely variable belt speed via potentiometer on ROFRE frequency inverter, type 897 - Reversible operation (right/left running) - Belt drive via INTERROLL drum motor - Stable sheet steel construction with closed steel plate under the conveyor belt - 1 piece height adjustable subframe HAACON with hand crank, conveyor height approx. 950 to 1150 mm - HAACON subframe mounted on steel plate, length 750 mm x width 500 mm x thickness 30 mm - 1 fixed support foot without height adjustment as transport support - Fully mobile on fixed castors Overall dimensions L x W x H: 3180 x 760 x 1150 mm Weight: 250 kg Good condition

Condition: used, Conveyor belt, belt conveyor, belt conveyor, belt conveyor MFP Fördertechnik Machine No: 20083 Year of manufacture: 2021 Usable length: 2800 mm Belt width: 360 mm Bsdpfxswqg Enj Ap Eodf Usable width: 300 mm Belt length: approx. 5800 mm Frame profile construction height: 70 mm Deflection roller diameter: 20 mm Belt speed: 10 m/min to 48 m/min Conveyor belt height: approx. 1150 mm Motor power: 140 Watt Power supply: 230 Volt, 50 Hz - Stepless belt speed via potentiometer on ROFRE frequency converter, type 897 - Right-left run - Belt drive via INTERROLL tube motor - Stable steel sheet construction with closed steel plate under the conveyor belt - 1 piece height-adjustable substructure with hand crank, conveyor belt height approx. 1000 to 1200 mm - Substructure mounted on steel plate length 500 mm x width 500 mm x thickness 30 mm - 1 piece fixed support foot without height adjustment as transport support - Fully mobile on fixed castors Overall dimensions L x W x H: 2880 x 500 x 1150 mm Weight: 200 kg good condition

Condition: excellent (used), functionality: fully functional, An old classic—anyone familiar with this device swears by it. 3 units are available, including a box of spare parts with circuit boards, etc. Total price for the complete package of 3 devices: €2,999. Free delivery! Price for a single unit: €1,250. Bodpfx Aexk Ty Nop Esdf

Condition: used, Conveyor belt, belt conveyor, belt feeder, band conveyor MFP Fördertechnik Bedpfjxf Uqlox Ap Ejdf Year of manufacture: approx. 2015 Usable length: 2500 mm Belt width: 250 mm Belt length: approx. 5200 mm Frame profile height: 50 mm Return roller diameter: 20 mm Belt speed: approx. 5 m/min to 40 m/min Conveyor belt height: approx. 1000 mm Motor power: 140 watts Power supply: 230 volts, 50 Hz - Stepless belt speed adjustment via potentiometer on ROFRE frequency converter, type 897 - Reversible operation (forward/reverse) - Belt drive by INTERROLL drum motor - Sturdy steel sheet construction with closed steel plate underneath the conveyor belt - 1 piece height-adjustable HAACON base with hand crank, conveyor height approx. 1000 to 1200 mm - HAACON base mounted on steel plate: length 500 mm x width 450 mm x thickness 20 mm - 1 piece fixed support foot without height adjustment as a transport support - Fully mobile on swivel castors Overall dimensions (L x W x H): 2570 x 400 x 1050 mm Weight: 115 kg

Condition: used, Conveyor belt, belt conveyor, belt feeder, MTF belt conveyor Year of manufacture: approx. 2015 Usable length: 2300 mm Belt width: 320 mm Belt length: approx. 4750 mm Frame profile height: 32 mm Return roller diameter: 25 mm Bodpfxex R Eh Io Ap Eodf Belt speed: 25 m/min to 50 m/min Conveyor height: approx. 950 to 1350 mm Motor power: 0.25 kW Power supply: 230 Volt, 50 Hz - Infinitely variable belt speed via ABB frequency inverter, type ACS150-03E-01A2-4 - Belt drive via RGM geared motor - Two-piece belt body made of aluminium profile with 8 mm slot - Belt body made of aluminium profile with stainless steel sheet cladding - 1 height-adjustable base with quick adjustment, mobile on 4 fixed castors - Conveyor belt was extended by approx. 1000 mm at some point. The lateral connecting rails are somewhat unstable Overall dimensions (L x W x H): 2350 x 500 x 900 mm Weight: 63 kg

Condition: reconditioned (used), modernized machine with new LTG-StoreControl P control system External dimensions: Overall height 6,010 mm Overall width 3,501 mm Overall depth 1,774 mm 25 carriers, each with a load capacity of 628 kg in the clear internal dimensions: H = 359 mm W = 2,880 mm D = 628 mm Chain pitch 406 mm Bodshfxkaepfx Ap Esdf Deposit table at 1,000 mm above floor level, with work surface / plastic surface Color: light gray, surface cleaned, signs of wear possible Motor power, drive: 1 x 5.5 kW / 400 Volt Additional extras: automatic chain tensioning, various intermediate shelves, subject to errors and technical changes Delivery and assembly currently mainly in Germany, Austria and several neighboring countries.

Condition: refurbished (used), 100% REVISED IN 2025 PROCESSING CENTRE FOR DEBURRING & CLEANING OF SHORT TUBE RSA RASAPLAN NV & RASACLEAN SK Scope of supply: Bodpsymarfefx Ap Ejdf 1. RSA automatic loading system for short pieces 2. Deburring system RASAPLAN N00; 3. RSA cleaning system RASACLEAN SK for short pieces Complete line RSA for short size/diameter tube with loading , deburring, washing. Thickness: 3 mm Pieces length / fixed lengths: 40 – 120 mm Length tolerance: 0,5 mm Deburring system: RASAPLAN NK V 500

Year of construction: 2006, condition: ready for operation (used), Three automatic small parts storage systems (AKL) Siemens Dematic SR-M100 are available. Storage locations: 19450, payload: 2x50kg per compartment, max. loading unit dimensions X/Y/Z: 600mm/400mm/320mm, travel speed: 200m/min, lifting speed: 120m/min, retrieval speed: 100m/min. On-site inspection is possible. Available from approx. Q4 2024. Bdsdetvgqnjpfx Ap Ejf

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 02/7467-70, total height: 6,000 mm, number of shelf rows: 8, shelf height: 300 mm, number of feeding trays: 18,500, Used High-Bay Storage System Type "Automated Small-Parts Warehouse" Frame height: 6 m, depth: 700 m, bay width: 1.5 m, 14 levels high, approx. 18,500 pallet spaces, bay load: ? kg, shelf load: 3x? kg, total length approx. 400 m. Scope of delivery: racking system, 4 pcs. Viaspeed S2-RZF DT, 1 storage and retrieval machine (SRM / stacker crane) 18,500 small load carriers (KLT containers) 600 mm x 400 mm x 270 mm The racking system is in operation until approx. 31.3.26. Required floor space in our facility: 51 m x 18 m x 6 m (height) There are 8 racking aisles serviced by 4 shuttle trolleys. Well preserved, little used, some components never used. Already dismantled. Preference is for sale of the entire racking system. For bids on partial quantities, racking aisles of approx. 51 m must be taken. The buyer must purchase and commission the main control unit (stacker crane / SRM) from the supplier at their own expense. Please state your offer price. Sale only within Europe (EU), Türkiye, Great Britain, and Switzerland. Only the German version of this text is binding. Technical data and item list: see handout. No packaging; any warranty is excluded. If you wish to dismantle the system yourself, please inform us accordingly in your offer. Bedpfxjxqrblo Ap Eedf We assume no liability for the accuracy of the technical data, the completeness of accessories or tooling, or for compliance with any safety or environmental requirements specified in accident prevention regulations.

Condition: good (used), Year of construction: 2012, Approx. 168 bays of Hofe shelving units, shelves 1.30m wide, 0.80m deep, frame height 2.50m - used: Bjdpfxozpf Enj Ap Esdf Price ex works, (net), disassembled, packaged and loaded. Per basic bay (with 2 frames and 5 shelves): €99.00 Per add-on bay (1 frame and 5 shelves): Up to 20 add-on bays: €79.00 From 21 add-on bays: €75.00 From 50 add-on bays: €69.00 For complete purchase: €59.00 Manufacturer: Hofe Type: Orion Plus Year of manufacture: 2012 / 2013 Approx. 5 shelves per bay Dimensions per shelf: approx. 1.30m x 80cm Frame height approx.: 2.50m Load capacity per shelf: 190kg Bay load: 1,000kg (some nameplates indicate 200kg, which is due to the load capacity of the platform on which the shelving units stand; the shelving units can support 1,000kg). Condition: good Available: from approx. August 2026, or by arrangement Location: Erfurt area Photos show a shelving unit with a depth of 60cm!

Condition: good (used), Glass shelf depth per compartment: 65 mm Max. glass height: 1680 mm Width: 1500 mm Bdedeyx Uf Sopfx Ap Esf Depth: 2600 mm Height: 2060 mm Condition: Good, second-hand

Condition: ready for operation (used), functionality: fully functional, power: 22 kW (29.91 HP), Steam boiler LOOS DF 600kg/h renovation! EPS EXPANDER continuous operation 600kg/h 15g/liter electric power 22KW Bdedpsu U Ad Rofx Ap Eof EPS bead storage 300 m3

Year of construction: 2025, condition: new, DOLFİN- VDL series Drum (Spiral) parts washing machines are used particularly for the purpose of cleaning small parts that are manufactured in large quantities and in bulk. The materials that are poured from the inlet part of the spiral drum in the device are directed towards the outlet part of the drum with the spirals inside the drum. While the drum moves in its own axis according to the set rotation speed, it subjects its parts to, respectively, washing (degreasing), rinsing, passivation and drying processes (varies per the model). Since these processes are sequential and continuous, all processes are completed quickly and effectively within a single device. Full penetration is ensured by pressurized spraying and dipping effects in each section. It is a very functional model of us that is used particularly for washing the bolts, nuts, washers, or such small parts, fittings, nipples, couplers and fittings that are processed in CNC and automated machines in high quantities. Regardless of the metal type of the parts to be washed, they are fully compatible with steel, brass, aluminum copper or stainless steel materials. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. Bedov S Dk Sepfx Ap Eodf The device operates continuously in accordance with the values of the washing parameters that have been entered from the control panel before operation. Parts that come out of production in bulk can be loaded into our device in 3 different manners. 1. With Vibrating Loading Chamber, 2.With Lift Conveyor, 3. By coupling to our Customer's existing system, Do not hesitate to contact for more information. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Year of construction: 2025, condition: new, DOLFIN-kbn2 series parts washing machines are used for the purpose of washing the parts, which are also larger in size and heavy, requiring rinsing, passivation or another process, particularly after washing. While it is desired to have no oil and other contaminants on the surface before assembly or packaging at the businesses and factories manufacturing parts in masses, it may also be necessary to remove the washing chemical used in the 1st stage from the surface of the part according to the utilization areas of the part. For this requirement, rinsing or a similar implementation in 2nd step is compulsory. Our KBN 2 series parts washing devices are special devices that contain more than one tank and/or bath. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. After the washing process and following the direction of the washing chemical to its own tank, the rinsing operation starts in the 2nd tank. If desired, the 3rd tank can be added and another function is added after rinsing. Bjdpfx Apev S Dihs Eedf Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. The device automatically completes the loop in accordance with the values of the washing parameters that have been entered from the control panel before operation. All processes are carried out with specially prepared programs along with PLC. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Condition: used, This listing is for the Cytiva AxiChrom 300/300 Chromotography collumn The unit is in full working condition and is ready for immediate use AxiChrom is a line of low-pressure, axial compression chromatography columns designed for process development and manufacturing of biopharmaceuticals. They are built for GMP‐compatible use, scalable from lab/ pilot to full production Bjdpfxsxhdwye Ap Eodf 300 mm inner diameter (i.d.) 300 mm bed height (column length) or related bed volume configuration Features Axial compression packing (intelligent packing): preprogrammed / automated methods for packing, ensuring reproducible bed density / performance. “Swing‑out” tube or movable adapters: for large diameters (≥ 300 mm), the column tube swings out to allow easier access to the bed supports, seals and O‑rings. Sanitization / Cleaning / GMP compliance: Parts (“wetted” and “pressure retaining”) are traceable by batch, and materials comply with USP Class VI, 21 CFR part 177, EMEA regulatory requirements. Cleaning and sanitization are feasible, including treatment with 1 M NaOH, with effectiveness for microbial and endotoxin removal. Flexible configurations: options for different bed heights (usually ~10‑50 cm for large diameters) and different bed support types

Year of construction: 2025, condition: new, functionality: fully functional, High Speed · High Precision · High Stability The VS series high-speed laser tube cutter for small pipes has arrived! This machine features a high-precision chuck system designed specifically for tube cutting. With excellent sealing and dust protection, it delivers clamping accuracy within ≤0.1mm ideal for ultra-precise small tube processing. The chuck rotates up to 160 RPM, with acceleration reaching 1.5G, easily enabling high-efficiency processing of small-diameter tubes. easily enabling high-efficiency processing of small-diameter tubes. Bdjdpfxowwzudj Ap Eof it supports true ultra-short tail cutting saving cost from the very beginning. Available in 3000W and 6000W, Handles square and round tubes from 10mm to 120mm in diameter, Also capable of cutting angle steel, channel steel, and I-beams A true all-rounder for small pipe fabrication. Supports automatic or semi-automatic loading Effortlessly enables smart and automated processing. One machine replaces three workers — A powerful and efficient tool for small pipe manufacturing!

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, laser type: fiber laser, laser power: 3,000 W, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Type: Two chucks Groove function: Standard Power range: 3KW, 6KW Round tube processing range: 10mm~160mm Square tube processing range: 10mm~160mm Chuck maximum speed: 130r/min Machine weight: 3T Power specification: 380VAC, 50Hz Optional loading rack: G16pro-automatic loading, G16pro-semi-automatic loading Bedpfx Ajwwz Dljp Esdf Optional unloading rack: servo unloading rack, cylinder unloading rack Standard: System 3000DE-DH, including nesting, supports servo, dustproof (Y axis), dustproof (X axis), dustproof (Z axis), rear card hollow dust removal, short tail material Optional: safety fence (light curtain), radiation-proof glass

Condition: new, functionality: fully functional, power: 3 kW (4.08 HP), Year of construction: 2025, Equipment: air conditioning, cooling unit, G16 Bsdpfewz Ufwex Ap Eedf Type: Two chucks

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A diesel jaw crusher PE250X400 with a screen typically refers to a mobile jaw crusher equipped with a diesel engine that can be used for primary crushing of various raw materials, and it includes a screening system for separating the crushed material into different sizes. Here are key features and information about such a configuration: 1. Diesel Engine: - The diesel engine provides the power for the jaw crusher, making it suitable for locations where electric power may not be readily available or practical. Diesel engines are known for their durability and reliability. 2. Jaw Crusher (PE250X400): - The "PE250X400" indicates the opening size of the jaw crusher in millimeters. In this case, the jaw crusher has an inlet opening of approximately 250mm x 400mm, allowing it to crush various materials with different sizes. 3. Screening System: - The inclusion of a screen allows the crushed material to be separated into different sizes based on particle size. This is particularly useful for producing various grades of final products. 4. Mobile Configuration: - A mobile jaw crusher with a diesel engine and screen is often mounted on a mobile chassis, making it easy to move from one location to another. This mobility is especially beneficial for applications in construction sites or quarry operations. 5. Material Handling: - The raw material is fed into the jaw crusher, where it is crushed by the reciprocating motion of the movable jaw against the fixed jaw. The crushed material then passes through the screen, and different-sized particles are discharged accordingly. Bodsq Nfu Espfx Ap Esdf 6. Adjustable Output Size: - The jaw crusher typically has an adjustable discharge setting, allowing operators to control the size of the final crushed material. 7. Applications: - Diesel jaw crushers with screens are commonly used in construction, mining, and quarrying applications for processing various materials such as concrete, gravel, rock, and other aggregates. 8. Maintenance and Operation: - Regular maintenance of the diesel engine, jaw crusher components, and the screen is necessary to ensure optimal performance and longevity. 9. Fuel Efficiency: - Diesel engines are generally known for their fuel efficiency, making them suitable for applications where a reliable power source is required without access to electrical grids. When considering a diesel jaw crusher with a screen, it's important to evaluate factors such as the required capacity, material hardness, and the desired final product specifications. Additionally, choose a reputable manufacturer known for producing reliable and high-quality mobile crushing and screening equipment.

Condition: good (used), Approx. 22 bays of shelving, SSI-Schäfer, shelf dimensions 1.30m x 0.40m - used: Price ex works: €1,250 (net), disassembled, packaged, and loaded. Bodpfx Aezqzl Tsp Esdf Manufacturer: SSI-Schäfer Type: probably R7000 Year of manufacture: unknown Plug-in system Shelf dimensions: approx. 1.30m x 0.40m Frame height: approx. 2.28m 30 pieces of frames 72 pieces of shelves Shelf type: e.g. 9415 - 150kg With bracing crossbars Condition: good to very good Available: immediately Location: Leipzig

Condition: used, Year of construction: 2021, Veolia Waste Water Treatment Spare Parts Package (Unused 2021) 2 x Alfa Laval Aldec 45 centrifuge (decanter) Process Application description: IW - waste water Process description: MUE, Biological sludge dewatering Max. density of compact wet cake: 1.3kg/dm3 at max. 4200rpm Bowl Maximum main speed:4200rpm Bowl diameter: 360mm DNF unit - upper tank - PPM 200CE - A DNF unit - upper tank - PPM 200CE - B Bdedpjzb N Hhsfx Ap Ejf 4x filter for Mn removal 3x reverse osmosis (RO) skid 3x powder activated carbon (PAC) dosing unit - Rittal JB 2x DNF unit - poseipump unit 3x unit blower ES145/5P-RVP300-spec 6x front filter Mn removal 2x DNF unit - recirculation pipe Spare parts can be seen in the asset list upon request. Please note pictures are representative and not of actual items Note: Sales are conditional upon the satisfactory completion within 24 hours of conditional sale of a Business Partner Due Diligence Check (BPDDC) and an End User Statement for (EUS) by the buyer, and, if the buyer is not the end user, for each end user.

Year of construction: 2022, condition: used, 2022 | Sika AL-264 Sika | Used Small Equipment 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 29500 or Make an Offer. Bdjdpfxozpalij Ap Eef Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 3 inspection points 3 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Concrete sprayer with 7 pallets of Roiter hoses 10 bar , machine could not be tested 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40936 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2021, condition: used, 2021 | Sika AL-264 LMT | Used Small Equipment 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 29500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 1 inspection points 1 approved ✅ 0 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Bdjdpfx Aozpalcep Ejf Concrete blaster 13m3/H , not operationally tested machine looks as it is in working condition 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40944 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Colour: Grey Empty weight: 1.000 kg - Details: - └ Description: blades for a planer - Documentation available: No - CE certificate present: No - Transport weight [kg]: 1000kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels Bdjdozmupdjpfx Ap Esf