Used Plate drilling machines with a spindle diameter over 161mm for sale

Metal processing machinery Drilling machines & boring mills Plate drilling machines with a spindle diameter over 161mm

Listing

Babberich

7577 km

Floorborer 18500 x 4500 with 180 mm

SCHIESS FRORIEP 1FB 180

2006

good (used)

Make: SCHIESS FRORIEP Type: 1FB180 Control: HeidenHain iTNC 530 Year: 2006 Hydrostatic guideways Cro8u0fah8 Hydrostatic spindle bearing Pick place head change station 1 = Facing head with U-Axis 2 = Universal milling head 3 = Boring Spindel support 4 = Vertical milling head Specifications Metric US Standard X - Travel 18500 mm Y - Travel 4500 mm Z - Travel 950 mm W - Travel 900 mm Table Length 20000 mm Table Width 4200 mm Table load 15000 / Mtr Speeds / ranges 1000 Rpm Power 85 kW Ram size ...

Listing

Kobližná 3, 631 32 Brno-Brno-střed, Tschechien

8351 km

Floor type boring machine

ŠKODA PC W 200 HA

1987

good (used)

Call

Catalog No. : 5479 Type: PC W 200 HA Producer: ŠKODA Made in: 1987 Characteristic: Power of the spindle drive: 77 kW Minimum rotary speed of the spindle: 0.8 1/min Maximum rotary speed of the spindle: 630 1/min Travel length X-axis (mechanical feed): 5000 mm Bxsqllyd0f Travel length Y-axis (mechanical feed): 4000 mm Travel length Z-axis (mechanical feed): 1600 mm Maximum feed rate in X-axis: 4000 mm/min Maximum feed rate in Y-axis: 4000 mm/min Maximum feed rate in Z-axis: 4000 mm/min T...

Listing

București

9236 km

Horizontal boring machine

SHIBAURA BSF34/23A

1980

good (used)

Call

Horizontal boring machine SHIBAURA BSF34/23A Milling spindle diameter 340 mm Boring spindle diameter 230 mm High-speed spindle diameter 100 mm Ram section 600 x 700 mm Milling spindle nose diameter 400 mm Boring spindle taper ISO No.60 (mm) Sb2lp Ram travel 1750 mm Boring spindle travel 1500 mm Total travel of ram and boring spindle 3250 mm Headstock vertical travel 5000 mm Column horizontal travel 13000 mm The machine is equipped with: rotary table 4000x5000 mm 60ton load + floor plates, and ...

Listing

Ingolstadt

8086 km

Ram-Type Floor Boring and Milling M/C

Skoda CNC W180 cnc

1997

used

Call

spindle diameter:180 mm x-travel:6.000 mm y-travel:2900 mm total power requirement:95 kW weight of the machine ca.:130 mit Zubehör t z-travel:1.250 Ram mm w-axis:1000 Spindel mm ram stroke:1250 mm dimension of the ram:450 x 450 mm bore spindle stroke:1000 mm bore spindle turning speed range:1600 U/min powered rotary table: IOS 40 CNC 2 Achsen B u.V Rotary-table:3000 x 3500 mm Rotary-table: CNC-IOS 40 NC mm stepless adjustable, relative to diameter:Index 4x 90° -360000 Winkel =0,001 Grad mm Chu...

Listing

Hünenberg

8011 km

CNC plate boring mill

SKODA W180NC

2000

good (used)

Call

X-axis 10.500 mm Y-axis 5.000 mm Z-axis 1.250 mm W axis 1.000 mm spindle power 75 kW Spindle speed 1.6 - 1,600 rpm. tool holder SK 50 Spindle with internal cooling Control: CNC HEIDENHAIN TNC430M rotary table SKODA SEA 60NC table dimension 3.500 x .3.500 mm B9ckahesov max. table load 60 to V-axis (displacement) 4.000 mm B-axis 360 A°

Discover more used machines

Pillar drills with 30-39mm drilling capacity

Drilling and milling

Skoda

Skoda 380

Skoda w 160

Horizontal boring mill

Floor boring machine

Boring mill

Floor type boring machine

Cnc boring mill

Listing

Eupen

7646 km

CNC Horizontal boring and milling machin

SCHIESS FB 160 Siemens 8 MC

1985

good (used)

Call

Travels: X-axis 9.500 mm Y-axis 4.100 mm D83wbr0z Z-axis 950 mm W-axis 900 mm Main spindle speeds (infinitely variable) 3,15 to 1000 rpm Spindle motor power 58 kW Feed range (infinitely variable): X-axis 0,1 - 9600 mm/min Y-axis 0,1 - 5600 mm/min Z-axis 0,1 - 5600 mm/min W-axis 0,1 - 5600 mm/min Accessories - Floor plate 6 x 4 m (CNC controlled B- and V-axis) - Table 2 x 2 m

Listing

Babberich

7577 km

CNC Horizontal borer X 10000 and Y 3500

Wotan Rapid 6

1999

good (used)

Make: Wotan Type: Rapid 6 Control: Bosch CC 200 Year: 2003 Aerostic in X Direction Hydrostatic Z Direction ( RAM) Hydrostic W Direction ( Spindel) Retrofitted in 1999 Optional DV45 Rotary table Optional Floorplates (3 units) 6750 x 5250 mm Optional Angle plates (2 units) 2700 x 1500 x 5000 mm Specifications Metric US Standard X - Travel 10000 mm Y - Travel 3500 mm Z - Travel 1000 mm W - Travel 900 mm Table Length 3000 mm Table Width 3000 mm Table load 25000 Speeds / ranges 800/2500 Rpm Power ...

Listing

Kobližná 3, 631 32 Brno-Brno-střed, Tschechien

8351 km

Floor boring machine

ŠKODA W 200 HB

1986

good (used)

Call

Catalog No. : 5936 Type: W 200 HB Producer: ŠKODA Made in: 1986 Characteristic: Control system: HEIDENHAIN 530 Minimum rotary speed of the spindle: 0.8 1/min Maximum rotary speed of the spindle: 630 1/min X-Axis travels: 16200 mm Y-Axis travels: 5250 mm Z-Axis travels: 1600 mm Taper: ISO 60 Spindle diameter: 200 mm Machine height: 8000 mm Machine length: 20000 mm Machine width: 10000 mm Equipment: Chip convoyer B92jup9yzz 2008: renovation (new control. wiring and drives)

Listing

Deutschland

7870 km

Plate boring mill

Skoda Pilsen W200 HC

1983

good (used)

Call

technical data: Drive power 83 kW clamping table 2500 x 2500 mm max. workpiece mass on table 20 t machining width on table 5770 mm machining height on table 2800 mm max. machining depth 1985 mm spindle diameter 200 mm Qfgyx slide cross section 530 x 550 mm additional equipment: 1 each angle head big + small

Listing

Gera

7978 km

Support sleeve plate boring mill

Skoda W200HC

good (used)

Call

Spindle diameter: 200 mm Spindle extension: 400 mm Bjgtfapdho x-way: 8000 mm y-way: 3150 mm z-way: 1600 mm Support sleeve dimensions: 520 x 540 mm Recording: ISO60 Torque d. Spindle: 34,300 Nm Bed guide width: 2000mm Spindle drilling depth: 2000 mm

Listing

Hünenberg

8011 km

CNC plate boring mill

ERNAULT SOMUA 270/175

1976

good (used)

Call

Retrofitted in 2005 Electrical / CNC control Siemens 840D Retrofitted in 2012 and 2019 Mechanical was made. B9euhyq9dy Technical Datas: Spindle rotation speed 1,25 – 600 tr/min Max. power spindle 55 kW 215 tr/min Horizontal run of the upright on the bench – X 15.000/30.000 mm* *X Travel appr. 30.000 mm for both machine Vertical stroke of carriage on upright - Y (mm) 5.600 mm Spindle stroke – Z 1.100 mm Flowing stroke - W 1.100 mm Advance – X 3-5.000 m...

Listing

Dnipro

9341 km

floor boring machine

Skoda W200

1987

good (used)

€210,000

EXW ONO plus VAT

Call

Horizontally - boring machine Skoda W200, in operation since 1987. Main technical characteristics: Processing control digital indication; Spindle diameter mm, 200; Cone mm, 60; Quill size mm, 520*5200; Maximum spindle torque: - Cutter diameter 160mm. – 8600 Kn. Maximum depth of boring by spindle in mm., 2000; The maximum extension depth of the quill in mm., 1600; Movement of the headstock on the rack in mm., 3000/4000; Moving the rack along the frame in mm., 4000/20000; Dimensions and weight: -H...

Listing

Kobližná 3, 631 32 Brno-Brno-střed, Tschechien

8351 km

Floor type boring machine

ŠKODA W 250 HA

1985

good (used)

Call

Catalog No. : 5481 Type: W 250 HA Producer: ŠKODA Made in: 1985 Characteristic: Control system: MEFI Power of the spindle drive: 77 kW Minimum rotary speed of the spindle: 0.8 1/min Maximum rotary speed of the spindle: 630 1/min X-Axis travels: 8000 mm Y-Axis travels: 6000 mm Z-Axis travels: 1600 mm Maximum feed rate in X-axis: 4000 mm/min Maximum feed rate in Y-axis: 4000 mm/min Maximum feed rate in Z-axis: 4000 mm/min Taper: M 140 Spindle diameter: 250 mm Maximum boring depth: 200...

Listing

Deutschland

7870 km

Plate boring mill

Skoda Pilsen W180 CNC

1993

good (used)

Call

technical data: Sinumeric 840 C control spindle diameter 180 mm B9gedj2pal milling spindle diameter 280 mm X-path 12000 mm Y-path 3750 mm W-path 1250 mm total extension (Z+W) 2250 mm clamping taper ISO 60 (50) headstock feed 2500 mm bed guideway width 1700 mm Nominal spindle speed range 2-1600 mm Main motor power 60 kW Total power requirement 210 kVA Machine weight approx. 120 t

Listing

Dnipro

9341 km

floor boring machine

Skoda WH160 CNC

2013

good (used)

€270,000

EXW ONO plus VAT

Call

Horizontally - boring machine mod. WH160CNC In operation since 2012 Main technical data of the machine Headstock GB 3000: Internal spindle taper ISO 50, BT 50 Tool taper DIN 69871, MAS 403 BT-50 Tool shank taper DIN 69872, MAS 403 P50T-01 Work spindle diameter ø160 Mm Spindle speed 10-2 500 rpm Max. spindle torque 2 655 Nm Slider dimensions 480 x 480 Mm Power of the electric motor of the main drive constant 51 kW Rack including chassis: Longitudinal movement of the rack - X 6000 Mm Headstock ver...